Sanders For Sale

AEM 8 Narrow Belt Sander

AEM 36" Sander 20 HP main motor Combination head

AEM 36" Sander

Alpha Brush KS-LS Sander

99x6' belt÷33 x 12 table÷220 V Single Phase÷Head tilts 45, 90 180 degrees

BIESSE LEVIA 320-1100 Wide Belt Sander, (2) Heads43" Width cap., Drum, Combination HeadHead Configuration:1st Head: Contact spiral grooved roll, 6" Dia., 30 HP motor.2nd Head: Combination head with a spiral grooved rubber-covered contact roll, 7-1/2" dia. 45 Shore covering, segmented platen computer controlled with air segments, 24 HP motor.Specifications: -- 43" X 74" Abrasive belts. -- Electronic abrasive belt tracking. -- All contact rolls with pneumatic seclusion, heads with air-jet abrasive belt cleaners. -- Output control of sectional platen. -- Conveyor belt feed, 11 - 66 FPM variable feed speed; Automatic conveyor belt tracking. -- 2 HP feed drive with inverter control. -- 1/8" - 7-7/8" Motorized thickness adjustment with LED readout.Equipped with & Features: -- Infeed and outfeed shoes or rubber-covered holddown rolls --Infeed panel "over-thickness" sensor. --Auto calibration, digital height read out -- Easy Quick grit selection. -- Electronic brakes on both sanding head motors. -- Infeed emergency stop. -- 3-Roll infeed extension and motor load metersNOTE: Some spec's may need to be verified

Biesse Levia 310-1350 Sander

BIESSE - ARTECH LEVIA 330, ...3-Head Wide Belt Sander43" Width cap. Drum, Drum, and Combination Head.Head Configuration: -- 1st Head: Rubber covered Contact Roll, 6" dia., 25 HP motor. -- 2nd Head: Steel Contact Roll, 6" dia., 25 HP motor. -- 3rd Head: Combination head with a rubber-covered Contact Roll and Finishing Platen.NOTE: There are (2) 25 HP motors; one drives the 1st head and the 2nd drives the other (2) heads.Specifications: -- 44" x 85" Abrasive belts, electronic abrasive belt tracking; all contact rolls with pneumatic seclusion; Head #3 with air belt cleaner. -- EASY PRO "2000 C" Processor with (200) programs, touchscreen for control of Sander functions, thickness opening, feed speed, sequential startup, contact roll seclusion, and abrasive belt cleaner. -- Conveyor belt feed, 11 - 66 FPM variable feed speed, 2 HP feed drive with inverter control. -- 1/8" - 7-7/8" Motorized thickness adjustment with LED readout; automatic part thickness setup.Equipped with & Features; -- Automatic conveyor belt tracking. -- Infeed & outfeed shoes or rubber-covered holddown rolls, infeed panel "over thickness" sensor. -- Electronic brakes on both sanding head motors. -- Infeed emergency stop, 3-roll infeed extension, and motor load meter.

Boarke 43" 2-Head Sander

37” Capacity single head 230 volt 3phase

BOARKE 43 RK Wide Belt Sander, (2) Heads43" Width cap. Drum, Combination HeadHead Configuration1st Head: Contact Roll for Calibration 10” Dia. Contact Roll, 85 Shore Hardness Dynamically balanced, 25 HP, 230/460 V, wired 230 V2nd Head: Combination Unit for Finish Sanding with ContactRoll, Pad or Both 5.5 “dia. Contact Roll 55 Shore Hardness, Dynamically balanced, 2.8” wide Finishing Pad, 20 HP, 230 / 460 V, wired 230 V.Specifications: -- Sanding Units include: Photo electric belt tracking, Large diameter Tension, and Idle Rolls, Rigid Main beams for superior accuracy, 2.8” Dia. spring loaded hold down rolls Quick release Tie Down Blocks, Y Delta Motor Starters -- Feed System: 4 ea. 5 ton capacity lifting screws, Heavy Duty 3-Ply conveyor belt, Heavy slider bed, machined for accuracy -- Variable conveyor speed from 7 – 45 FPM, Inverter Controlled Variable Speed, 2 HP drive motor, Conveyor belt centering device -- Infeed Roller, Guide Ways provide accurate vertical movement -- Control Panel (Located on Belt Loading Side for convenience) -- Digital Controller positions machine thickness -- Digital Readout in Inches or MM, And ν Buttons micro-adjust thickness in 0.001” increments, Micro-Adjustment hand wheel for final thickness in 0.001” increments -- Automatic Thickness Set Up, Motorized Thickness adjustment -- Amp Meter, and Volt MeterEquipped with & Features: -- Over Thickness Shut Off, Body activated safety switch at front of machine -- Door activated safety switches on ALL Doors, Emergency Stops front and rear -- UL / CE approved electrical components -- Disc Brakes on both motors -- Emergency Shut off activated when Air Pressure is too low, Overloads are tripped -- Emergency Stops are activated

BOERE - TKS 900, ...2-Head Top Wide Belt Sanding Machine900 mm (36") Working width; equipped with: (1) Contact roller, (1) Fine sanding pad. Head Configuration -- 1st Head: Rubber contact roller, spirally grooved, Shore hardness 80, diameter 265 mm (10.4"), driven by 18 kW (25 HP) motor. -- 2nd Head: Sanding pad, electronic-pneumatic controlled, 114.7 kW (20 HP); Air blowing unit for cleaning the abrasive belt. -- All heads use abrasive belts size: 910 x 1,900 mm (35.8" x 74.8").Feed System -- Variable feed speed: From 5 - 25 MPM (16 - 82 FPM); 1.5 kW (2 HP) motor. -- Motorized part thickness opening: 3 - 150 mm (0.1" - 6"), driven by 0.12 kW (0,15 HP) motor.Complete with: -- Emergency Stop Systems for abrasive belt breakage and low belt tension. -- Infeed safety bar for operator protection and oversized parts. -- Automatic Star Delta starters, motor load meters. -- Pneumatic belt tension. -- Emergency Stops at the front & back. -- Extended infeed belt, approx. 42" long.Actual model: BOERE "TKS 900".

BOERE TPK-900 Planer Sander 2 Heads -- 2-Head, 900 mm (36") width cap. equipped with (1) Knife planer head and (1) Rubberized Drum. -- 1st Head: Helical knife planer head with (4) spirals of 4-sided carbide inserts each 14 mm x 14 mm, 20 HP motor. -- 2nd Head: Drum, approx 10" dia. rubber covered contact roll, 15 HP motor; all heads with air operated caliper type disc brakes. -- Variable feed speed 13 - 52 FPM, 2.5 HP motor, automatic conveyor belt tracking, anti-kick back fingers on infeed, infeed hold down shoes and double outfeed pinch rolls on outfeed. -- Motorized part thickness adjustment 0" - 6" with LED read out display . Complete with: -- Controls mounted on belt loading side, load meters for each head, conveyor infeed extension.

50” width drum/drum/platen heads 480 volt 3-phase Bottom and top sanders can be sold separately Pictures coming for bottom sander

BOERE - TK 1300, ...Abrasive Planer -- (1) Head, 51" width cap. x 6" thickness cap.; 10" dia. spiral rubber-covered contact drum, 50 HP motor. -- Abrasive belt size 52" x 75", air tensioning, and BO-TRACK electronic abrasive belt tracking. -- 2 HP Variable feed speed motor for 16 - 82 FPM. -- Single infeed rubber-covered holddown roll, followed by floating shoe on the infeed, and single outfeed rubber covered holddown roller followed by rotating cleaning brush. Complete with: -- Motor load meter, (4) corner mounted screw jacks with powered bed raise & lower, and 9-3/4" dust port.

Weeke "SWT 113K" Wide Belt Sander - Single Head (2013), 37" Width cap., single combination head, touch screen design. 37" Single Combination Contact Roller & Segmented Fine Sanding finishing platen, combination head consisting of steel contact roller 160 mm (6") diameter & adjustable fine sanding platen, pneumatically controlled. Electronically controlled segmented platen designed to remove dubbing of all edges of a solid wood.or veneered panel. Working width of 950 mm (37") and part thickness of 3 - 160 mm (1/8" - 7"). 11 kW (15 HP) Sanding Head motor; abrasive belt size of 1,115 x 2,620 mm (43.9" x 103"); air jet abrasive belt cleaner. 2-Speed conveyor belt 4 & 8 MPM (13 & 26 FPM), rubberized hold-down rollers, in & outfeed roller table extensions with (5) rollers each. Infeed safety shutoff bar, front mounted control panel, and main motor load meter. Emergency stops at front & back.

BUTFERING TSBC213 CCC/C Line wide belt sander53" Width cap , Drum, DrumSpecifications -- Wide Belt Sander, Model Optimat SBC 213 CC/C-Line -- Sanding width: 1350mm -- Working height: 900mm constant pass -- Workpiece thickness. 150 mm -- Abrasive belt width: 1370 mm -- Abrasive belt length: 1900 mmHead Configuration1st Head -- Abrasive belt drive: ( Drum )1 speed 25.3 kW -- Abrasive belt speed:18 m/s -- Contact roller diameter 140mm -- 2nd Head -- Abrasive belt drive: 3 speed. 2.7/7.5/15 kw -- Abrasive belt speed: 4.5/9/18 m/s -- Contact roller diameter. 140mm Equipped with & Features -- Infeed drive infinitely variable 1,5 kW2.5-13 m/min.Cleaning brush diameter:

BUTFERING - OPTIMAT STO 311 RRL, ...3-Head Wide Belt Sander43" Width cap., Drum, Drum, and Platen.Head Configuration:1st Head: 7" Steel spiral contact drum, 29.5 HP motor.2nd Head: 7" Rubber covered drum, 25 HP motor.3rd Head: Combination Style Head with Grooved Rubber-Covered Drum and Air-Cushion Pad; 3rd Head Motor: 16.7/21.5 HP.Specifications: -- 43" x 75" Abrasive belts, electronic abrasive belt tracking. -- Conveyor belt feed with variable feed speed from 8 - 43 FPM. -- Automatic conveyor belt tracking. -- Infeed & outfeed spring-loaded rubberized holddown rolls. Equipped With & Features: -- 1/8" - 5-1/2" Motorized thickness adjustment, "quick-set" automatic thickness adjustment with LED readout. -- Infeed panel "over-thickness" sensor. -- Outfeed rotary panel cleaning brush Infeed & outfeed emergency stops. -- Safety interlocks on all doors. -- Roller infeed conveyor extension, -- Motor load meters and main motor electronic brakes.

BUTFERING - STO 211 RL, ...2-Head Wide Belt Sander.43" Width cap.; Drum & Combination Head.Head Configuration:1st Head: Grooved Steel Contact Drum, ~8” dia. and 25 HP motor.2nd Head: Combination style, w/grooved rubber covered drum & platen, 20 HP motor.Specifications: -- 43" x 75" Abrasive belts, both heads with grit compensation. -- Electronic abrasive belt tracking. -- Conveyor belt feed with 2-speed control at 14 & 28 FPM. -- Automatic conveyor belt tracking. -- Infeed & outfeed spring-loaded rubber covered holddown rolls.Equipped with & Features: -- Automatic part thickness setup with index control. -- 1/8" - 5-1/2" Motorized thickness adjustment with joystick control and LED readout. -- Panel "over-thickness" sensor at infeed. -- Infeed & outfeed emergency stops, safety interlocks on all doors. -- Roller infeed conveyor extension. -- Motor load meters and main motor electronic brakes.

BÜTFERING SWT 325 QX - 2-Head Wide Belt Sander for lacquer, veneer & solid wood sanding.1,350 mm (53") working width, equipped with (1) Cross belt "Q", (1) BÜTFERING patented Combination Head "X" Roller/Pad with inner chevron belt.This configuration allows for high-quality sanding of various surfaces, like: &#9679 Fine sanding & calibrating of solid woods &#9679 Lacquer sanding with grit sizes P 120 - 800 &#9679 Preparation for high-gloss surfaces1,350 mm (53") working width, equipped with (1) Cross belt "Q", (1) BÜTFERING patented Combination Head "X" Roller/Pad with inner chevron belt.Head Configuration: 1st Head: Cross belt sanding unit "Q". With inner chevron belt. Infinitely variable abrasive belt speed 2 - 16 m/Sec (7 - 53 FPS). Segmented fine sanding pad, electro-pneumatically controlled by BÜTFERING EPS system, with 54 segments, each 25 mm (1") wide. Abrasive belt size 150 x 4,700 (5.9"- 185"). Driven by 13,5 kW (18 HP) motor.2nd Head: BÜTFERING patented Combination Head "X" Roller/Pad with inner chevron belt. Consisting of Contact Roller, rubberized, spirally grooved, and Segmented fine sanding polishing platen with inner chevon belt. With 54 segments, each 25 mm (1") wide, electro-magnetically controlled. Infinitely variable abrasive belt speed 2 - 12 m/Sec (7 - 40 FPS). Abrasive belt size 1,370 x 2,620 mm (54" x 103"). Driven by 20 kW (27 HP) motor.Equipped with BÜTFERING MPS - Magnetic Pad System with 3 sensors per segment. Dynamic sanding pressure control ensures that equal sanding pressure is applied on the entire workpiece, with compensation on the leading & trailing edges. This sytem will allow up to 2 mm (1/16") in thickness variations.Total repeatability. High-precision machined segments are wear- & maintenance-free. For very intricate sanding tasks the sanding pressure of every segment can be individually controlled with the BÜTFERING IAC - Individual Actuator Control system.Both heads equipped with: Electronic abrasive belt tracking. Pneumatic abrasive belt tension. Air jet belt cleaner, activated by part size. Feed system: -- Constant pass line 900 mm (35.4"). -- Vacuum conveyor bed assembly. Divided in two sections, on each section the vacuum power can be adjusted. -- Conveyor belt feed speeds 2,5 - 13 m/Min (8 - 43 FPM). Driven by 0,55 kW (0,75 HP) motor. -- Part thickness 3 - 160 mm (1.2" - 6.3"). -- Motorized thickness adjustment driven by 0,25 kW (0,35 HP) motor. -- Automatic thickness adjustment. -- Automatic electronic conveyor belt tracking. -- Extractable support table with idle rollers at infeed. -- Support roller and support table at outfeed of the machine.Machine management system: VSE Control System with Color Touch Screen for all major machine operations, programming of parameters and storage of 1,000 sanding programs, supervision of major machine functions. Visual display of the work process. Error diagnosis. Fully automatic start sequence of the main motors. Recor