• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
8 Results Found for Sander Viewing 1 - 8 of 8 results
RECENTLY ADDED
STANDARD LISTINGS
COSTA SA TS 1350 Wide Belt Sander;Specifications: -- 53" COSTA equipped with (1) Segmented head + (1) Brush cleaning head. -- 1st Head: (1) Veneer platen with variable pressure; 32 mm segmented sensing pads; variable frequency drive for infinitely variable speed control of abrasive belt sanding speed. -- Belt size 53" x 103" with air abrasive belt cleaning. -- 2nd Head: Approx. 6" dia. panel cleaning brush, de-ionizing bar for static discharge, high speed oscillating air jet blowers, vacuum feed bed assembly with suction fan assembly. -- Complete with: Vacuum bed conveyor feed mat.
Equipment Location:SOUTHEAST
Joe Retzlaff
800-374-5009 ext:348
COSTA KA CCT 1350 3-Head Sander: 52" width cap. and constant pass line conveyor height;Excellent Veneer and Solid wood sander with (2) Contact rolls and (1) Segmented platen.Head Configuration: -- 1st Head: Rubber covered contact roll, 9-7/8" dia., 35 HP motor. -- 2nd Head: Rubber covered contact roll, 9-7/8" dia. approx. 40 shore covering, 30 HP motor; -- 3rd Head: Segmented finishing platen, electronically controlled narrow segments conform to panel width and length for thin veneer sanding, 25 HP motor. -- Sanding Belt Info: 53" x 103" abrasive belts, air blast abrasive belt cleaning, pneumatic belt tensioning with electronic tracking. -- At Outfeed: Rotary panel cleaning brush, 7" dia. with 2 HP motor.Other Specifications: -- Equipped with: PLC processor controls. -- Feed System & Conveyor Bed: Variable feed speed conveyor with inverter control 16 - 82 FPM. -- Floating bed assembly for veneer sanding, vacuum conveyor bed assembly; Infeed & outfeed spring loaded hold down shoes on all heads; -- Features & Complete with: Anti-static bar and rotary air jet abrasive belt blowers; Powered raise & lower conveyor bed with LED readout; motor load meters on all sanding head motors. -- Actual Model is COSTA KA CCT 1350 3-Head sander -- Dimensions: 90" L x 80" W x 96" H; weight approx. 10,000 Lbs.
Equipment Location:SOUTHEAST
Joe Retzlaff
800-374-5009 ext:348
COSTA KK CC-CCC 1350 Wide Belt Bottom and Top Sander, (5) Heads;53" Width capacity, Bottom (2) drums, Top (3) drums.Bottom Machine KK CC: -- Constant passline height - 1,000 mm (39"). -- Motorized infeed conveyor, length - 1,000 mm. -- Motorized infeed pressure rollers - 200 mm diameter. -- Sectioned infeed pressure beam.1st Head: -- Rubber covered cylinder C/400, 80-Durometer, 50 HP (37 kW) Main motor. -- Pneumatic grit set with 4-position revolving turret. -- Intermediate pressure shoe with lips and rubber covered rollers.2nd Head: -- Rubber covered cylinder C/400, 60-Durometer, 40 HP (30 kW) Main motor. -- Pneumatic grit set with 4-position revolving turret. -- Outfeed pressure shoe with lip and rubber covered rollers. -- Outfeed roller, 60mm for linkage from feed table to conveyor. -- Horse Hair brush unit, 180mm dia., 1.5 HP motor. -- Vacuum Feed Table - 10 HP (7.5 kW). -- Vacuum set pneumatic for (2) levels of vacuum pull control.Top Machine KK CCC: -- Infeed roller, 60 mm for linkage from feed table to conveyor. -- Motorized infeed pressure rollers - 200 mm diameter. -- Sectioned infeed pressure beam.1st Head: -- Rubber covered cylinder C/400, 80-Durometer, 50 HP (37 kW) Main Motor. -- Pneumatic grit set with 4-position revolving turret. -- Intermediate pressure shoe with lips and rubber covered rollers.2nd Head: -- Rubber covered cylinder C/400, 60-Durometer, 40 HP (30 kW) Main motor, -- Pneumatic grit set with 4-position revolving turret. -- Intermediate pressure shoe with lips and rubber covered rollers.3rd Head: -- Rubber covered cylinder C/400, 40-Durometer, 30 HP (22 kW) Main motor. -- Pneumatic grit set with 4-position revolving turret. -- Outfeed pressure shoe with lip and rubber covered rollers. -- Horse Hair brush unit, 180 mm dia., 1.5 HP motor.Equipped With & Features: -- Vacuum Feed Table, 10 HP (7.5 kW). -- Vacuum set pneumatic for (2) levels of vacuum pull control. -- (5) Oscillating sanding belt cleaners with timed entry.
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
COSTA SATTT-1350 Wide Belt Sander, (3) Heads;1,350 mm (53") working width; equipped with (2) Combination Heads (1) Segmented Finishing Platen. Head Configuration: -- 1st Head: Combination head with steel rollers and segmented sanding platen between, 15 KW (20 HP) motor. -- 2nd Head: Combination head with steel rollers and segmented sanding platen between, 15 KW (20 HP) motor. -- 3rd Head: "Superfinish" Segmented polishing platen with computer controlled narrow TP16 segments of 16 mm (0.6") that conform to part shape and size, 15 KW ( 20 HP), 2-speed motor with inner Chevron belt. -- 4th Position: Rotating air nozzles for panel cleaning. -- All heads are equipped with oscillating & rotating blowers for sanding belt cleaning.Feed system: -- Constant passline. -- Variable conveyor feed drive 5 - 25 m/Min (16 - 82 FPM). -- Vacuum bed assembly with suction fan 5 kW (7,5 HP). -- Part thickness 3 - 160 mm (1/8" to 6-5/16") by programmable motorized height adjustment with LED readout of conveyor bed assembly. -- Machine management system: -- "PCM B" Computer with screen controls sander functions. Storage for multiple sanding programs.Equipped with & Features -- Intermittent air blast abrasive belt cleaners on all heads. -- 1,375 x 2,620 mm (54" x 103") abrasive belts on contact roll and platen heads. -- Infeed and outfeed spring loaded hold-down shoes on all heads. -- Air caliper disc brakes on all sanding heads. -- Emergency stops front & back. -- Panel Cleaning Brush at outfeed.NOTE: Some spec's need to be verified
Equipment Location:PACIFIC NORTHWEST
Joe Retzlaff
800-374-5009 ext:348
COSTA KH2 CCCC 1350 Wide Belt Sander (4) Heads52" Width cap. Drum, Drum, Drum, DrumHead Configuration: --1st Head: Steel contact roll, 9-7/8" dia. , 45 HP motor; --2nd Head: Rubber covered contact roll, 9-7/8" dia. 80 shore, 45 HP motor. --3rd Head: Rubber covered contact roll, 9-7/8" dia. 60 shore, 30 HP motor. --4th Head: Rubber covered contact roll, 9-7/8" dia. 60 shore, 20 HP motor.Specifications --53" x 103" abrasive belts, air blast abrasive belt cleaning, pneumatic belt tensioning with electronic tracking. --Controls with PLC processor, --Pneumatic grit compensation with 4-position stops. --Variable feed speed conveyor with inverter control 16 - 82 FPM.Equipped with & Features --Vacuum conveyor bed assembly with 5.5 HP suction fan and motor. --Infeed & outfeed spring loaded hold down shoes on all heads. --Powered raise & lower conveyor bed with LED readout and motor load meters. --Outfeed rotary panel cleaning brush
Equipment Location:MID ATLANTIC
Joe Retzlaff
800-374-5009 ext:348
COSTA 868 C + CCCC 1350 Wide Belt Bottom and Top Sander, (4) Heads;53" Width capacity, Bottom (1) drums, Top (3) drums.BOTTOM SANDER MODEL 868 C + CCCC 1350 FCSS HEAD CONFIGURATION:1st Head: DRUM UNIT, C/250 (10") STEEL, MAIN MOTOR HP. 100SPECIFICATIONS: --CONSTANT PASSLINE HEIGHT 100MM (39") --LONGITUDINAL SANDING BELT LENGTH 2620MM 103" FOR BOTTOM MACHINE --MOTORIZED INFEED PRESSURE ROLLER 200MM 7.87" --MOTORIZED INFEED CONVEYOR 700MM 27" --HEAVY DUTY INFEED SECTIONED --PRESSURE BEAM WITH LIP -- INCREASED CUTTING SPEED 36M/SEC --PNEUMATIC GRIT SET WITH 4 POSITION --REVOLVING TURRET --HEAVY DUTY OUTFEED SECTIONED PRESSURE BEAM WITH LIP --ALL PRESSURE BEAM WITH LIPS ARE CHROMIUM COATED --BRUSH UNIT WITH MOTOR HP. 1.5 --VACUUM FEED TABLE HP. 4 --PNEUMATIC VENTILATOR FOR VACUUM UNIT --OSCILLATING AIR JET --BLOWERS WITH TIMER FOR CLEANING OF SANDING BELT --ELECTRONIC FEED SPEED ADJUSTMENT IN RELATION TO MAIN MOTOR POWER UTILIZATION WITH INVERTER FOR VARIABLE FEED SPEED 5-25 M/MIN --FB 13/20- MOTORIZED TRANSFER CONVEYOR BETWEEN BOTTOM AND TOP MACHINESTOP SANDER MODEL 868 C + CCCC 1350 970414/AC1+AC2HEAD CONFIGURATION:1st Head: DRUM UNIT, C/250, (10") STEEL MAIN MOTOR HP.602nd Head: DRUM UNIT, C/400, (16") 60 DUROMETER MAIN MOTOR HP.303rd Head: DRUM UNIT , C/400 (16"), 40 DUROMETER MAIN MOTOR HP. 20 + INVERTER FOR VARIABLE CUTTING SPEEDSPECIFICATIONS --LONGITUDINAL SANDING BELT LENGTH 3250MM 128" FOR TOP MACHINE --MOTORIZED INFEED PRESSURE ROLLER 200MM 7.87" --HEAVY DUTY INFEED SECTIONED PRESSURE BEAM WITH LIP --INCREASED CUTTING SPEED 30M/SEC -- --ELECTRONIC GRIT SET WITH DIGITAL DISPLAY --HEAVY DUTY INTERMEDIATE PRESSURE BEAM WITH LIP --ELECTRONIC GRIT SET WITH DIGITAL DISPLAY --INVERSION OF ROATATION OF #3 DRUM UNIT WITH EXTRA DUST HOOD --HEAVY DUTY INTERMEDIATE PRESSURE BEAM WITH LIP --ELECTRONIC GRIT SET WITH DIGITAL DISPLAY --HEAVY DUTY OUTFEED PRESSURE BEAM WITH LIP --ALL PRESSURE BEAMS WITH LIPS ARE CHROMIUM COATED --VACUUM FEED --TABLE, HP. 15 1 PNEUMATIC VENTILATOR FOR VACUUM UNIT --4 OSCILLATING AIR JET BLOERS WITH TIMER FOR CLEANING OF SANDING BELTS --BRUSH UNIT, MOTOR HP. 1.5 1 ANTI-STATIC BAR --ROTARY PANEL CLEANERS --4 QUICK FIT SYSTEM FOR EASY INSERTION OF SANDPAPER (TOP MACHINE ONLY) --4 QUICK LOCK SYSTEM FOR AUTOMATIC LOCKING OF SANDING UNIT TO THE FRAME --ELECTRICS 480/60/3 WITH 110V CONTROL CIRCUITSOSCILLATING LENEAR GRINDER FOR RUBBER COVERED DRUMSADDITIONAL INFORMATION:Top Sander: 13’-6” long x 10’-6” wide Bridge Conveyor: 6’-7” long x 5’-9” wide Bottom Sander: 8’-0” long x 10’-4” wide.
Equipment Location:SOUTHEAST
Joe Retzlaff
800-374-5009 ext:348
COSTA A CTT 1350 - 3-Head Wide Belt Sander for Calibrating and Fine Sanding.1,350 mm (53") working width; equipped with (1) Contact roller, (2) Segmented electronically controlled sanding pads and Scotch Brite brush roller. Part thickness 3 - 160 mm (0,1" - 6.3"). Variable feed speeds.Excellent solid woods, veneer & lacquer sander.Head Configuration: -- 1st Head - Rubber Contact roller 300 mm (11-13/16"), spirally grooved. Shore hardness 85. Driven by 22 kW (30 HP) motor. -- 2nd & 3rd Head - Electronically controlled segmented sanding pads. (42) section electronically controlled narrow segments conform to panel width and length for thin veneer or sealer sanding. Driven by 11 kW (15 HP) motor. Infinitely variable abrasive belt speed. -- Scotch Brite Brush for Panel Cleaning at Outfeed. -- Oscillating & rotating blowers for Part Cleaning at Outfeed, controlled by part size.All heads use 1,380 x 2,620 mm (54 x 103") abrasive belts.Feed system: -- Pass line height 740 - 900 mm (29" - 35"). -- Variable feed speeds inverter controlled from 3 - 15 m/min (10 - 50 FPM) with 1,9 kW (2,5 HP) motor. -- Motorized part thickness opening 3 - 160 mm (0,1" - 6.3") with 0,25 kW (0,35 HP) motor. -- Vacuum conveyor bed for smaller parts with 4 kW (5.5 HP) suction fan. -- Electronic part thickness setting & readout in combination with the COSTA Automatic Working Sequence. -- Roller table extensions at in- & outfeed to support longer parts. -- Infeed safety bar for operator protection and over-sized parts.Machine Management: -- COSTA Automatic Working Sequence System controlling all major machine functions like abrasive heads start-up with visual load meters, thickness and feed speeds, brush roller, cleaning blowers. -- Storage for multiple sanding programs. -- Control of electronic sanding pads with COSTA CONPAD system.Features & Includes: -- Electronic sanding belt tracking. -- Pneumatic sanding belt tensioning. -- Automatic shut-off in case of pneumatic pressure loss. -- Emergency stops front & back. -- Complete manifold for dust extraction system for heads, brush roller and outfeed panel cleaning blowers. -- Separate electrical cabinet. -- User manual + electrics manual + CE certificate.Note: Price landed USA.Actual model is COSTA A CTT 1350 - 3-Head Wide Belt Sander for Calibrating and Fine Sanding.
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
COSTA KK CC-CCC 1350 Wide Belt Bottom and Top Sander, (5) Heads;53" Width capacity, Bottom (2) drums, Top (3) drums.Bottom Machine -- Constant passline height - 1,000 mm (39"). -- Motorized infeed conveyor, -- Motorized infeed pressure rollers -- Sectioned infeed pressure beam.1st Head: -- Rubber covered cylinder 16" dia. 35 KW motor -- Intermediate pressure shoe with lips and rubber covered rollers.2nd Head: and 3rd Head: -- Rubber covered cylinder 16" dia. (2nd head) 52 KW motor (3rd head) 88 KW -- Outfeed pressure shoe with lip and rubber covered rollers. -- Vacuum Feed Table - 10 HP (7.5 kW). -- Vacuum set pneumatic for (2) levels of vacuum pull control.Top Machine -- Infeed roller, -- Motorized infeed pressure rollers -- Sectioned infeed pressure beam.1st Head: 1st Head: -- Rubber covered cylinder 16" dia. 35 KW motor -- Intermediate pressure shoe with lips and rubber covered rollers.2nd Head: and 3rd Head: -- Rubber covered cylinder 16" dia. (2nd head) 52 KW motor (3rd head) 88 KW -- Outfeed pressure shoe with lip and rubber covered rollers. -- Vacuum Feed Table - 10 HP (7.5 kW). -- Vacuum set pneumatic for (2) levels of vacuum pull control..Equipped with and Features: --All drives equipped with disc brakes --Vacuum feed belt with fans in each sander.
Equipment Location:SOUTHEAST
Joe Retzlaff
800-374-5009 ext:348