Misc For Sale

BIshamon Lift Table

Consisting of: Item 1: Loading Belt White plastic fabric belt with polyurethane coating. Drive by a reversible geared motor. Covering over the gap between the belt and the infeed of the press. In addition the belt runs on supporting rollers. One-piece support of the belt. Length of transport approx.: 4,000 mm Width of transport approx.: 1,600 mm Working height approx.: 950 mm Feed coupled with the press loading equipment. Markings on the conveyor belt for the cylinder rows and the maximum useful width. Total transport track liftable and lowerable with a guided introduction of the sealing frame and the vacuum plate. Mobile switch for acknowledgement and stop fitted to the top of the Infeed. Technical Data: Size of heating platens: 1,700 x 3,400 mm (67" x 134") Useful area: 1,550 x 3,100 mm (61" x 122") Loading side: 1,700 mm (67") Total pressure: 5,800 kN (638 tons) This system is ready to be removed from the current location. Downstroke type, suitable for the pressing of veneers, HPL, etc. onto parts made of chipboards and MDF boards.

Specs (to be confirmed): 7.5 HP Motor Marking stations on both sides Cantilevered rollers – 22” long x 3¼” diameter on 15” centers Measuring station for chalk marks – both sides Infeed flat belt conveyors – both sides with hold downs 9” wide x 25’ long Outfeed flat belt conveyors – both sides with (8) kickers each Pneumatic kickers Approx. 54’ long x 12” wide (9” belt) This system is still under power. The location is no longer in need of another optimizing system and this is ready to be moved. Test video was run on 7/31/18.

Systems include: System is capable of processing 17,000 BF of 4/4 hardwood per 8-hour shift Lateral infeed conveyors (Separator in video that chooses upper or lower saw is no longer available) Outfeed sorting belts with 4 kicker stations Florescent crayon sensors Length and width tally Grade sorting Length sorting Max width 8’’ Max thickness 1 1/4’’ Blade diameter 20’’ Pneumatic stoke at 250 millisecond per stroke Pneumatic hold down Server driven feed works Voltage requirement for Saws and outfeed belts; 220V 3 Phase Voltage requirements for Lateral infeed conveyors; 480V 3 Phase UPDATE: The top saw in the video has been sold. The second machine is still available with infeed and outfeed! Software upgraded in 2012

Short infeed Two columns - Open machining station Trim Saw: 7.5 HP Score Saw: 7.5 HP High Speed Jump Shape Head: 10 HP High Speed Shape Head: 10 HP Keyhole Attachment Triangular Sanbelt: 103"; 3 HP Parallel Sandbelt: 146"; 3 HP Oscillation Unit Clean off Brush Double Wheel Foiler Unit Double Wheel Foiler Unit Overhead Double Wheel Foiler Unit Top Clean Brush Bottom Clean Brush Horizontal Holdown Adjustment Digital Speed Display Fletcher Single Side Foiler - This machine originally was sent to Canada and is 550 volt.

Grutter Dato Blade Windstop Machine with (2) 10HP Motors & 3/4HP Gearbox

Grutter Dato Blade Windstop Machine with 2 10HP Motors

Grutter Birdsmouth Rafter Saw

Grutter Tongue Remover with 15HP Motor

Grutter Window Splay with 5.5HP Motor and Grutter Cable Saw.

Italpresse Model PM/DE/25-13 Four units available MFG Specs (to be confirmed): Platen Dimensions: 2500 x 1300 mm (98" x 51") Loading side: 2500 mm (98") Loading height: 915 mm (36") Daylight Opening Range: 500-100 mm (19.6-3.9") Number of double acting press cylinders: (6) Cylinder piston diameter: 100 mm (3.94") Down acting cylinder stroke: 400 mm (15.75") Maximum thrust: 90 Metric tons (99 US tons) Maximum specific pressure on a 950 mm x 2250 mm mold: 4.2 kg/cm2 Integrated high pressure hydraulic pump (4) Spring loadede roller rails in the lower platen for easy loading of molds Four corner rack and pinion systemto maintain platen parallelism Advancement form one pressure step to the next is by push button control Press opening is by push button control Press closing requires two push buttons for safety These units were purchased for a specific project and never put into production. Two of the machines have very low hours and the other two were only tested. Ready to load! There are (3) systems available at this time.

This system is still in service and will be replaced by some new machinery over the next few months. Available immediately

Presses 1 sheet every 75 seconds ItalPresse Throughfeed Press, Model: Storm/S 5’ x 8’ Capacity Automatic Loading with Scissor Lift Panel Brush Cleaner Top & Bottom Glue Spreader Loading Station Power Infeed Belt 5’ x 8’ Press with Mylar Belt Outfeed Conveyor Hot Oil Boiler This system is still under power and ready to be removed from service.

The OMEC 750 is utilized to indent dovetails for drawers and various furniture elements. The machine is equipped with a mill spindle which allows machining of indents of adjustable height. The 750 model can machine single male or female work pieces, or both simultaneously. The locking and release of the pieces takes place manually by means of pneumatic valves. The machine can work at two different feed speeds. Controls are located on a built-in control panel Eccentric HHS mill cutter assembled on the machine Plates Kit for indent break 1.1 KW, apporximately 1.5 HP (1) spindle motor runs at 18,500 RPM 1.1 KW, approximately 1.5 HP feed drive motor Dimensional limits of workpieces: Length 7-7/8" (200mm) - 59" (1500mm); Width 2-3/8" (60mm) - 18-7/8" (480mm); Indent Height ¼" (6mm) - 11/16" (18mm); Front thickness .275" (7mm) - 2-3/8" (60mm); Side thickness 3/8" (10mm) - 1-1/8" (30mm)

Seybold Mechanical Shear

48" x 66" Table Foot control Model: LS236 This machine was in good working condition when removed from service.

All on wheels Roller conveyor is attached, but can be removed Single 3.2 HP 208v electric motor and a small hydraulic pump attached Bottomed out they are about 12-1/2” to 13” to top of rollers from the floor They lift 48” so they top out at 60-1/2” to 61” The roller sections are 24” wide x 96” long There are (3) Southworth Lifts available. Model number is KLS2-48 for the horizontal lifts, and CLS2-48 for the pivoting lifts

Lifting cap: 200 non porous: 175 porous Enclosed Power units: – CM500/CM700/CM1000 operate at 16 – 18 in. Hg.. These unites were just removed from service and ready to ship. There are (5) units currently available

Inventory list includes: Infeed chain with elevator: Variable infeed adjusts to spped of line. Mekanika Strap Saw and Press: Holds bundles against the saw and cuts straps. Mekanika Infeed Table: Sets the run rate and panel width. Controls flow into the sander. Mekanika Infeed Roller: Transfers panels of wood into the sander. DMC Sander: 53" Machine Top and Bottom Sander, 50-65 FPM Dubois Shaker Table: Separates indivdual pieces of the panel to ensure dust free workpiece. Coater - Double Apllication Roller (2014): Two machines, Direct drive roller application system that allows wet to wet and multiple coatings to be set up at one time which allows for faster changeovers. Adjustable height coaters that allow production variations from 1/8" - 2". Dubois Stain Brush Station: Adjustable speed nylon/boar hair brushes used to promote even coating coverage. Miltec/Dubois UV Stations(2011): Three units. Adjustable height and powered UV lighting assembly used to cure coatings. Units can be used as a full cure (all layers) machine or a B staged cure machine. Dubois Jet Air Tunnel: Natural gas powered forced air tunnel to maintain board surface temperatures to control gloss and adhesion. Dubois Denibber: Two machines. Adjustible oscillating brush used to scuff the surface of the product to prepare fo rthe next coating application. Only required after full UV cure. Dubois Reverse Fill Roll Coater: Chain driven application roller with reverse fill roller allowing coatings to penetrate the open grain of certain species and give product a smoother finish. Adjustable height coaters allow product from 1/8" - 2". Miltec/Dubois UV Station (2011): Three machines. Adjustable height and powered UV lighting assembly used to cure coatings. Units are only used as a B staged cure (single layer). Dubois Coater: Chain driven application roller used to apply various types of coatings to the product. Dubois Denibber: Adjustable oscillating brush used to scuff the surface of the product to prepare for the next coating application. Only requires use after a full UV cure. Dubois UV Station (2011): Unit is used as a final cure (all layers) and has direct effect on gloss. Insepction Conveyor: Solid conveyor used to inspect product, remove defexts and re-insert end matched pieces into the panel, which allows panels to be sent to the packing stations. 55'6" Long x 5' Wide. Mekanika Outfeed Bridge: Three machines. Carries product to the individual packing stations based on a repetitive pattern that is controlled by sensors. Mekanika Outfeed Accumulator: Three machines. Unit folds boxed and allows the accumulation of several boxes at each station before being transferred to the box stacker. Dynaric Strapper Station: Three machines. These units seal the finished box with one nylon strap per machine for a total of three straps. Mekanika Labeling Station: New printer in 2017. Applies product label to boxes. Mekanika Outfeed Stacker: Hydraulic and pneuma