Glue Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 3
60 Results Found
Sort By 
Recently Added Items
2022 Biesse Cosmo Case Clamp
Call For Price
2022 Biesse Cosmo Case Clamp
2020 Homag Cabteq S250 Case Clamp
Call For Price
2020 Homag Cabteq S250 Case Clamp
Black Brothers 22D Glue Spreader
Call For Price
Black Brothers 22D Glue Spreader
STANDARD LISTINGS
Call for Price

Bertheson Press Platform size 51 Wide X 102 Long with 2 16 ft shuttle driven aluminum runner platforms. Pressure 2500 psi and we ran a temperature of 350 degrees for Tego and 165 degrees for plywood. The Press can laminate Tego Film glue or pva c glue. This press is a double shuttle and can laminate up to 14 ft by double pressing on shuttle. We can get the press operational if you are interested. We only have to hook up the power. Very good condition!

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Biesse Cosmo Case Clamp Bought new, never used

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

BLACK-BROTHERS TOP & BOTTOM PANEL CLEANING BRUSH MACHINE

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Black Brothers 22D glue spreader Max working width 50"Max working thickness 3" 1/2 Hp, 230/460 volt three phase drive motor Table passline height 40" 7-1/4" diameter x 50-1/2" long top and bottom chrome doctor rollers 9" diameter x 50-1/2" long top and bottom rubber covered applicator rollers (Please note that the top doctor roller and top applicator roller is segmented) 11-3/4" long and 38" long top roller segments

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Specification from owner 2007 Black Brothers 775-56” Top and Bottom Glue Spreader with an extra-large 12.5” opening designed for SIP (structural insulated panels) manufacturing. This machine is brand new and ready for immediate delivery. 575V, 3PH

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

This machine is no longer in service. Currently being cleaned and checked, new images coming soon! Mfg 2000 1HP 208-230/460V 3Ph 32" wide

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

BLACK BROTHERS 5012 COLD PRESS (PNEUMATIC W/FIXED OPENING) -- Specifications:Platen dimensions: 62" x 146", End loading on 62" side with 28" fixed daylight opening, Multi-Zoned single top platen.Pneumatic pressure created by air pods in upper platen, 50 PSI specific pressure. -- Complete With: Spring loaded roller rails in the lower platen for easy loading/unloading.

Torry Hiddema
800-374-5009 ext:371
Call

Call for Price

There are (12) of these available. (2) are new in crates. (10) are being used. Available approx August 1 2023 Manufacturer specs: PRODUCT DESCRIPTION AT-Race 4' x 12' Face Frame Assembly Table The AT Race 4' x 12' Open-Back Face Frame Assembly Table features clamping arms that glide smoothly on an open beam. This allows assembly of larger face frames or other components with parts that extend beyond the top of the table. The redesigned quick-clamps feature place-and-stay movement – no need to lock them into place – and centered activation for easy clamping from either direction. The rigid steel arms, constructed out of Unistrut, will stand up to years of use, while the open back table gives you more work area and can handle oversize frames without taking up valuable shop space. Create a two-person work cell with the AT Race 4’ x 12’ - it includes both left- and right-side fences. This assembly table is an essential addition to your inventory of professional woodworking production tools. When you are in need of premier woodworking tools and supplies, turn to Castle USA. We pride ourselves on providing our customers with the absolute best and highest quality tools, machinery, and accessories. Features and Benefits include: - Professional woodworking assembly table - Open back design: - Accepts oversized frames and other large assemblies - Maximizes work area - Dual Unistrut clamping arms with three adjustable air cylinders that hold work firmly for easy assembly and minimal sanding - 45 Degree, 1" laminated top for easy glue clean-up and less operator fatigue than horizontal clamping tables - Built-in driver holster keeps driver within easy reach for increased convenience and efficiency (driver sold separately) - Convenient integrated connection port for air-powered driver adjacent to driver holster - Left- and right-side fences allow two-person operation - Rigid and lightweight for easier handling and positioning Technical Specifications: - Unistrut rigid steel arms with redesigned quick-clamps - Driver sold separately - Assembly required - Footprint: 165"x43"x83" - Manufactured in the USA

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

156" long x 60" wide x 80" high (3) vertical pneumatic Clamping bars (7) clamps that can be placed horizontal or vertical on perforated surface

Carolina Machinery Sales, Inc
704-288-1904
Call

$ 21,200

DEPENDABLE - 203, ...Cold Press40" x 102" Cap., side loading on 102" sideSpecifications: &#9679 (3) Split upper platens: 34" wide x 40" deep; split platens can be interlocked for single platen operation. &#9679 45" Max. daylight opening with 12" down stroke hydraulic cylinders. &#9679 (6) Rows of pop-up rollers in machine bed for loading & unloading. &#9679 (3) 7-3/4" Dia. hydraulic press cylinders from the top; (1) per platen. &#9679 Hydraulic power pack with 10 HP motor mounted on floor at end of Press.

Torry Hiddema
800-374-5009 ext:371
Call

Call for Price

Good Condition 3 phase .5 HP motor

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

- 16.5' long - 16 rotating arms and a total of 288 - 32" clamps

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

DOUCET CLAMP CARRIER 30 SECT X 8 FT 6 IN WIDE (200+) 36" CLAMPS MODEL SRH-1 SX30- 8.5-240-36 SN 87-10-28 Includes: HYD PWR PACK, PANEL FLATTENER Dismantled and ready to load!

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Doucet Clamp Carrier Model SRH-40-8.5-240-36 40 Section Clamp 8.5' Wide (240) 2-1/2" x 36" Clamps - Rapid Change Voltage: 480/3/60

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Laminating Rolls: 61" (155 cm) roll face with thermally conductive high release silicone surface; upper and lower main rolls internally heated; temperature controlled by state-of-the-art infrared sensors and digital PID controllers Laminating Opening: 1.5" (3.8 cm) maximum opening controlled with dual air cylinders. Laminating Material Uses heat activated and pressure-sensitive materials 0 - 55" (0 - 140 cm) wide on a 3" (7.6 cm) ID core Laminating Speeds 0 to 14.5 fmp (0 to 4.5 mpm) Post Lamination: Fanless cooling system provides uniform, filtered air for thermal shock without exposure to dangerous fan blades. Vinyl Transfer Complete roll to roll transfer, lamination, and edge trimming in one pass Safety Features • Two emitter-receiver photoelectric systems protect rolls from damage. • Emergency kick cables front and rear. • All electrical and moving mechanical parts are located in bolted cabinets • Four emergency stop buttons Installation Requirement 220 to 240 VAC, 50/60 Hz, 55A. 32 A per phase. Air: 2 cfm at 100 psi, minimum(0.5 m3 at 700 vPa)

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

HOFER HOP 160 K Hydraulic Door/Veneer Heavy Duty Cold PressSpecifications:Platen size 63" deep x 98" long, Total Daylight/Opening 32".available. Currently set at about 13" opening. Top platen is hydraulically powered by a 2.2 KW power pack. and has (10 sets) of bolt holes for manual adjustment of daylight opening.Equipped with:(8) 3-1/4" Diameter Hydraulic cylinders, Rack & pinion platen leveling adjustment.Front and back loading (access on all sides).Heavy duty steel structural beams. Bolted top and bottom platens.Features:Pneumatically loaded 3 +1 rows of idle rollers on bottom platen for ease of feeding the load in and out front of press. Air valve for up/down selection of bottom platen rollers.Hydraulic closing speed adjustment.Electrical controls on right hand side.Dimensions/Weight: 124" x 72" x 122" H. Approx. 12,000 Lbs.

Torry Hiddema
800-374-5009 ext:371
Call

Call for Price

MANUFACTURER SPECIFICATIONS 103" width Capacity 55" height capacity (4) 24"vertical pneumatic clamps (3) 24" horizontal pneumatic clamps

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Homag Cabteq S-250 Case Clamp

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

HYDREX HPX510-1-160T Hot Press, Single daylight opening. Suitable for pressing High Temperature materials.Features (Overall): -- Board size up to 5' x10', -- Front Controls for easy setup & operating configuration, incl. temperatures and cycle time , emergency pedal, quad temperature protection device. -- (8) 100 mm diameter Cylinders (upstroke) -- 160 Tons of overall pressure -- Recirculating Thermal Oil heated with package heaters housed in a boiler tank.Detailed Specs: -- 122" x 61" Thermal Oil heated Hot Press with drilled steel platens, 1.5" thick, 25" Max Working height.. -- (8) Hydraulic "upstroke cylinders", 100 mm diameter, rack & Pinion guide system for parallel closing of the platens. -- 160 Ton total pressure, 46 PSI specific pressure over the entire platen area; 7.5 KW (10 HP) hydraulic pump motor. Platen moving speed 5 FPM -- 92 kW Electric Heater with 1.5 kW (2 HP) Hot Oil circulation pump; approximately 180° C (356° F) maximum operating temperature. -- Loading from (3) sides, heavy I-beam welded steel frame construction. -- "Safety" emergency Stop Cable around the operating sides of the machine, and E-STOP mounted on the control panel. -- Features: "Last" (2) cylinders can be turned off to press shorter panels. - Overall press weight is approx. 20,900Lbs).

Torry Hiddema
800-374-5009 ext:371
Call

Call for Price

HYDREX HPX510-5 Hot Press 160 Tons, Five daylight openings. Suitable for laminating veneer panels/doors, decorative paper, fireproof board, etc.Features (Overall): -- Board size up to 5' x10', -- Front Controls for easy setup & operating configuration, incl. temperatures and cycle time , emergency pedal, quad temperature protection device. -- (8) Cylinders (upstroke) -- 160 Tons of overall pressure, -- Recirculating Thermal Oil heated with package heaters housed in a boiler tank.Detailed Specs: -- 122" x 61" Thermal Oil heated Hot Press with drilled steel platens, 1.5" thick; -- (8) Hydraulic "upstroke cylinders", approx. 85 mm dia.; rack & Pinion guide system for parallel closing of the platens. -- 40 PSI specific pressure over the entire platen area; 54 KW heating power. Approx. 7.5 KW (10 HP) hydraulic pump motor. -- 1.5 kW (2 HP) Hot Oil circulation pump; approx. 120° C (248° F) max. operating temperature. -- Max Working height is 4"; Loading from (3) sides; 39-1/2" from floor with lower platen in the down position: heavy I-beam welded steel frame construction. -- "Safety" emergency Stop Cable around the operating sides of the machine, and E-STOP mounted on the control panel. -- Overall press weight is approx. 27.500 Lbs. -- Available: Extra Large Oil Heating Tank for Special Higher Temperatures if needed.

Tony Cornacchione
800-374-5009 ext:432
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved