Panel Saws For Sale

Nice Altendorf 12=14" TKR 90 Sliding Table Saw, owner is retiring 14" blade with scoring 7.5HP Motor 3 Phase

Altendorf WA6 Sliding Table Saw Adjustable Scoring Blade Single phase - 230 V Overhead guard

Altendorf F45 DIGIT X 3400 Sliding Table Panel Saw 3 Phase 220 volt Main motor 7.5 HP Scoring motor ¾ HP Cutting capacity 10’ stroke with 52” rip capacity Accessories included: Altendorf Server Mobile Cart Additional Crosscut Slide Additional Sliding Table Support Crosscut Slide Extension Digital Crosscut Fence Digital Rip Fence Double-sided Miter Fence (Duplex D) 7 Sawblades: 3-12” crosscut blades; 1-14”combination blade; 2-18” combination blades; 1-18” ripping blade

Altendorf Sliding Table Saw 3400 mm

Altendorf F45 Slider

CAM-WOOD TX-P12AAT FRONT LOAD AUTOMATIC PANEL SAW: -- Specifications: 149.6" (3,800 mm) Max. rip cut cap. & 149.6" (3,800 mm) max. pull-back front/back; 10 HP (7.45 kW) saw blades motor, 1" dia. arbors,4" (101 mm) max. depth of cut with 355 mm (13.9") dia. blade at 4,500 RPM,160 mm (6.3") scoring blade at 6,000 RPM blade speed. -- Positioning Speed:2 HP Saw carriage drive motor, variable cutting speed from 16 - 98 FPM (5 - 30 MPM), return speed of 98 FPM (30 MPM). -- Pusher Fence: Programmable rear material push fence with servo drive, made of square tubular steel bar.0.5 HP pusher motor, rack & pinion drive, 16 - 49 FPM (5 - 15 MPM) speed. -- Operator & Machine Control:PC Controller with touch-pad to program cutting patterns or individual line cutting operation, graphic displays, self-diagnostics, machine parameter list; touch-screen keypad for data entry. -- Complete with: (3) Bakelite covered front support tables and fully covered rear table; (optional air flotation tables available at additional cost)(4) Dust collector outlets, (1) on each end of the saw base, (1) on the right side at cut-line height, and (1) on the right-hand side on top of the pressure beam. -- Available Options: &#9679 (1) TX-ATSA AUTO SIDE ALIGNMENT DEVICE = $2,300.00 additional cost. &#9679 (3) TX-PFT AIR FLOATING TABLES = $3,690.00 additional cost. -- Actual Model is CAM-WOOD TX-P12AAT

CAM-WOOD TX-P330X FRONT LOAD AUTOMATIC PANEL SAW: -- Specifications: 126" (3,200 mm) Max. rip cut cap. & 126" (3,200 mm) max. pull-back front/back; 15 HP (11.2 kW) saw blades motor, 1" dia. arbors,3-1/8" (82.5 mm) max. depth of cut with 355 mm (13.9") dia. blade at 4,500 RPM,180 mm (7") scoring blade at 6,000 RPM blade speed. -- Positioning Speed:2 HP Saw carriage drive motor, variable cutting speed from 16 - 150 FPM (5 - 46 MPM), return speed of 100 FPM (30 MPM). -- Pusher/Gripper Fence: Programmable rear material push/gripper fence with AC servo drive, 1 HP pusher motor, rack & pinion drive, 16 - 180 FPM (5 - 55 MPM) speed. -- Operator & Machine Control:PC Controller with touch-screen to program cutting patterns or individual line cutting operation, graphic displays, self-diagnostics, machine parameter list; touch-screen keypad for data entry. -- Complete with: TX-ATASA automatic side alignment device, (3) Bakelite covered front support tables and fully covered rear table; (optional air flotation tables available at additional cost)(4) Dust collector outlets, (1) on each end of the saw base, (1) on the right side at cut-line height, and (1) on the right-hand side on top of the pressure beam. -- Available Options: &#9679 (3) TX-PFT AIR FLOATING TABLES = $3,690.00 additional cost. &#9679 (1) TX-P3SB THIRD JUMP SCORING UNIT = $4,290.00 additional cost. &#9679 (1) PC BASE CONTROL (Optional with OPTIMIZE SOFTWARE) = $4,890.00

CAM-WOOD TX-P10AAT FRONT LOAD AUTOMATIC PANEL SAW: -- Specifications: 128" (3,250 mm) Max. rip cut cap. & 128" (3,250 mm) max. pull-back front/back; 10 HP (7.45 kW) saw blades motor, 1" dia. arbors,4" (101 mm) max. depth of cut with 355 mm (13.9") dia. blade at 4,500 RPM,160 mm (6.3") scoring blade at 6,000 RPM blade speed. -- Positioning Speed:2 HP Saw carriage drive motor, variable cutting speed from 16 - 98 FPM (5 - 30 MPM), return speed of 98 FPM (30 MPM). -- Pusher Fence: Programmable rear material push fence with servo drive, made of square tubular steel bar;0.5 HP pusher motor, rack & pinion drive, 16 - 49 FPM (5 - 15 MPM) speed. -- Operator & Machine Control:PC Controller with touch-screen to program cutting patterns or individual line cutting operation, graphic displays, self-diagnostics, machine parameter list; touch-screen keypad for data entry. -- Complete with: (3) Bakelite covered front support tables and fully covered rear table; (optional air flotation tables available at additional cost)(4) Dust collector outlets, (1) on each end of the saw base, (1) on the right side at cut-line height, and (1) on the right-hand side on top of the pressure beam. -- Available Options: &#9679 (1) TX-ATSA AUTO SIDE ALIGNMENT DEVICE = $2,300.00 additional cost; &#9679 (3) TX-PFT AIR FLOATING TABLES = $3,690.00 additional cost. -- Actual Model is CAM-WOOD TX-P10AAT

CAM-WOOD TX-P10A Front-Load Manual Panel SawSpecifications: -- 128" Max. rip cut cap. & 128" max. front/back, 10 HP saw blades motor, 1" dia. arbors; -- 4" Max. depth of cut with 355 mm (13.97") dia. blade at 4,500 RPM, 160 mm (6.30") scoring blade at 6,500 RPM blade speed. Features: -- 1 HP Saw carriage drive motor, variable cutting speed from 16 - 98 FPM, return speed of 98 FPM. Equipped with: -- (2) Flip stops and (2) air cylinder stops on fence; (3) front support tables (optional air tables available - add $ 3,690), Steel rear tables. -- (3) Dust collector outlet/connections, (1) on each end of the saw base, and (1) on the right-hand side at cut-line height.

Casadei AXO 85 Panel Saw 230V/3PH/60Hz This saw is ready to be dismantled and go to work!

Panel Rip Saw available in 60" and 72" width capacity - Main Motor: 40 HP (460 V) - Infeed Motor: 3 HP - Main Spindle: 74 mm - Main Spindle Speed: 2500 RPM - Blade Diameter: 205 mm - Moveable blades with locking collars - Maximum Width: 60" or 70" - (12) Rubber Hold Down Rollers - Quick Change Blade Holders - Thickness Capacity: 0-30 mm - Variable Feed Speed: 0-15 meters/minute - Anti-Kickback Safeguard Options: - Semi Automatic Hydraulic Infeed & Outfeed Tables (3000 kg) - Automatic Infeed System (including lift table)

GABBIANI GALAXY 125 PLM FRONT LOAD, AUTOMATIC PANEL SAW: -- Specifications:126" Overall cutting length; 4.9" (125 mm) max. saw blade projection.24 HP Main motor 3,800 RPM w/pneumatic saw blade "quick change" system, 2.4 HP scoring motor; 16.5" (420 mm) Max. main blade dia., 6.3" (160 mm) 7,600 RPM scoring blade with external adjustment. -- Saw carriage: -- Travel speed from 0 - 297 FPM; 297 FPM constant return speed; powered by TEFC AC brushless motor. -- Pusher fence: -- Variable pusher speed from 0 - 297 FPM; return 297 FPM, powered by TEFC AC brushless motor on rack & pinion system.Equipped with: -- (6) Material gripper clamps; (2) Prismatic THK guides with recirculating ball bearings and forced lubrication. -- Pressure beam: Alternate pressure beam for final trim cut; (2) automatic pneumatic side aligners with rollers on front & back of the cut line. -- Features: Optimized blade/Pressure beam stroke optimized according to book height thus obtaining better cuts and lower cut time; electronic scorer adjustment user settable via PC; Double independent side aligner crosscuts optimized, stroke 86.6" (2200 mm) by min. panel width of 2.8" (70 mm). -- Operator & Machine Control:PC Front with INTEL CELERON 2 GHz, 128 Mb RAM, 40 Gb hard disk 15" color monitor, industrial keyboard & mouse, 1.44MB & CD ROM 48X disk drives for data transfer, (2) RS-232 serial port 1 parallel, 6 USB and network card capable for downloading from the office.Includes: -- DISA dust collector shown in photos. Specifications subject to verification.

GIBEN SMART ST Cross Cut Panel SawSpecifications: -- Maximum cross cut capacity 1,600 mm (62.99"), Maximum saw blade projection 75 mm (2.95"). -- Saw blade dia. 320 mm (12.60”); scoring blade diameter 180 mm (7.09”). -- Carriage variable feed speeds 20 MPM (66 FPM), Carriage return speed 20 MPM (66 FPM).Equipped with: -- 5.5 kW (7.5 HP) Saw motor, 1.1 kW (1.5 HP) Scoring motor. -- Pneumatic blade release, Front & rear safety bars.

GIBEN SMART 75 SP CNC Front Load Panel Saw129" (3,300 mm) Overall cutting length, 2.95" (75 mm) max. blade projection.Specification & Features: -- 15 HP (11 kW) Main & 1.5 HP (1.1 kW) scoring motor, 3,800 RPM main saw blade & 6,000 RPM scoring blade with external adjustment. -- Saw carriage forward travel speed 16 - 131 FPM (5 - 40 MPM), return speed 131 FPM (40 MPM); powered by AC brushless motor with inverter. -- Equipped with: Programmable pusher fence with (6) material clamps that open to 2.55" (65 mm); pusher fence forward travel speed 3 - 82 FPM (.8 - 25 MPM), return speed 131 FPM (40 MPM); pusher fence powered by AC Self-braking motor on dual rack & pinion system. -- Automatic side aligner roller behind the cut line with pneumatic locking, 2.4" - 48" ( 60 - 1,220 mm) stroke. -- Features: "PC" front end controller with: Windows "XP" operating system, Pentium processor, 64 MB RAM, 4.8 GB hard drive, floppy & CD drives, (2) RS 232 serial ports, (1) PCI network slot, 15" SVGA color monitor."MOELLER" PLC, LCD Readout display & standard 102 key standard keyboard mounted on movable pendant for manual, semi-automatic, or fully automatic cycle control; G 57 includes real-time graphic display with on-board pattern planner software. -- Rear of machine with (8) in-line nylon profile rail tracks; Pressure beam w/recessed sections allows for continuous clamping over the full length of the beam including the last trim cut. -- Complete with: Safety trip bar, safety flaps at cut-line, protection fence around rear of saw,(1) Air floatation tables 79" x 20" (2,000 x 510 mm), (3) Air floatation tables 51" x 20" (1,300 x 510 mm).NOTE: PLC needs to be checked for slow response time and measuring problem. Otherwise in good condition when taken from service,

2008 Giben Smart 80 SP Front Loading Panelsaw

6' x 14' capacity 4 HP motor 220 volt 3 phase stop system on base

HENDRICK USA-50 SINUC CNC Cross Cut Panel Saw -- Equipped with: SINUC 3000 Cut Controller; Standard Cut Width: 53"; full 3" cut height for stacking material. -- 14" Main blade (3,500 RPM); 6" scoring blade (5,000 RPM); 10 HP TEFC main saw blade motor. -- Saw carriage traverse speeds are variable by inverter; uses unique dual THK linear rectangular ways for added rigidity and accuracy at the cut line. -- Complete with: Automatic Lubrication System on THK rail for pusher drive; full-length pneumatic hold-down bar for accuracy and increased dust collection efficiency. -- Includes: (2) Adjustable Flip Stops; (3) 4" ports for max. dust collection; safety shield; safety bar on both front and rear of the hold-down bar; E-Stop Button on each support table; push button for cycle start; saw cover with air cylinder lock with time delay; dual channel safety relay. -- PC Controller accepts 3rd party saw optimization and cut programs. -- Input Table: 174” x 54” x 51” w/ Fence; Output Table: 33 ½” x 94 ½” x 38”. -- Also includes: Spare guide rails new in crate ($ 15,000 value).

Holzher 1265S Vertical Panel Saw

Holz-her Cut 85 Panel Saw; under power until 8/21 model 6210

HOLZ-HER CUT 6220 Dynamic FRONT LOAD, AUTOMATIC PANEL SAW with 20'+ RIP cutting capacity!: -- Specifications: 4,300 mm (169.2") Max. rip cut cap., 6,250 mm (246") pull back pusher stroke; 105 mm (4.1") saw blade projection;28 HP (21 kW) Main saw motor, 3 HP (2.2 kW) scoring motor. -- Saw Carriage:Variable feed speed from 3 - 426 FPM (1 - 130 MPM ), return speed of 492 FPM (150 MPM).Automatic cutting length limiter adjusts the cutting length at the end of the workpiece, automatic saw carriage lubrication. -- Pusher Fence:(10) Material gripper clamps; 82 FPM (25 MPM) forward positioning speed, 328 FPM (100 MPM) return speed.Rack & pinion movement on both sides to assure the pusher remains parallel. -- Operator & Machine Control:PC Front-End with "CUTCONTROL 2" + "EasyPlan" + Windows operating system,19" TFT Display with unlimited program storage; keypad for data entry, USB & RS-232 serial port, "CUTCONTROL 2" offers Real-Time 3D Graphics, diagnostic for errors or machine malfunction by means of an error signal code, incremental or absolute programming in mm or inches."CUTCONTROL 2" allows the operator to easily input information for absolute, serial, format, grooves, perforations, & position cutting which allows the machine to easily adapt to various situations & materials"Opti-Cut" & "EasyPlan" is a very user friendly on-board Optimizing System for all types of various cutting patterns, including angled cutting -- Complete with: Non Marking rear roller support rails; Solid Air Cushion Table before & after the cutting line, ensures easy panel handling. Pneumatic crosscut side aligner, adjustable from 0" - 82.6" (0 - 2,100 mm);Automatic saw blade height adjustment; Electronic positioning of the scoring blade through the NC control.(4) Adjustable via "pneumatic locking" air support tables, ea. 70.8" x 24" (1,800 x 509 mm); -- Actual Model is HOLZ-HER CUT 6220 Dynamic