• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
7 Results Found for Sander Viewing 1 - 7 of 7 results
RECENTLY ADDED
STANDARD LISTINGS

Cemco U002252 Sander

Call for Price
Cemco Orbital Sander Model U002252, S/N 05109, 675Hours
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
CEMCO 4374 Wide Belt Sander, 3-Head with 6' width capacity;3-Head, 72-inch width capacity, with the following head sequence. -- 1st Head: 15" Dia. rubber covered contact roll, 75 HP motor. -- 2nd Head: 15" Dia. rubber covered contact roll, 75 HP motor. -- 3rd Head: 5" wide finishing platen, 60 HP motor. -- Contact rolls & finishing platen with dial indicator height adjustment, 74" x 126" abrasive belts with solid-state electronic tracking.Feed System: -- Variable feed speed from 20 to 60 FPM, Heavy Duty feed works, 5 HP conveyor drive 20 to 60 FPM. -- Infeed shoes & holddown rolls on heads. -- Motorized thickness adjustment with automatic part thickness set-up. -- Conveyor cleaning brush with dust hood, split abrasive belt shutoff system.Complete with: -- 18" Infeed conveyor extension. -- Magnetic motor controls, load meters and emergency stop.Used for only (1,219) Hours.
Equipment Location:WEST COAST
Joe Retzlaff
800-374-5009 ext:348
CEMCO 4352 Wide Belt Sander (3) Heads; -- 52" Width cap. Drum, Drum, Finishing Platen, 3-Head.Head Configuration: -- 1st Head: Steel contact roll, 50 HP motor. -- 2nd Head: Rubber contact drum, 40 HP motor. -- 3rd Head: Finishing Platen, 40 HP motor.Specifications: -- 52" x 103" Abrasive belt. -- Electric eye tracking & air tensioning. -- Variable speed conveyor feed. -- Motorized thickness adjustment from 0" - 6", combination of infeed & outfeed spring shoes & pinch rollers.Equipped with & Features: -- Auto emergency stop, motor load meters, bad belt compensating device, dust tight electrical enclosures, and recent replacement of conveyor belt.
Equipment Location:WEST COAST
Joe Retzlaff
800-374-5009 ext:348
CEMCO URF-2243 Wide Belt Sander, (2) Heads43" Capacity Drum, Combination Head. Head Configuration: -- 1st Head: Rubber covered contact roll, 10" dia., 25 HP motor. -- 2nd Head: Combination head with roll and finishing platen, 20 HP motor. Specifications: -- Belt size for 1st and 2nd head: 76" x 43". -- Electronic abrasive belt tracking & pneumatic belt tensioning. -- 2 HP Variable feed speed conveyor motor from 15 - 60 FPM, 0" - 6" motorized thickness cap., infeed & outfeed rubber covered pinch rollers on both heads. Equipped with & Features -- Motor load meters and infeed conveyor extension. -- Air disc brakes on sanding heads. -- Infeed emergency operator stop bar, and (4) dust outlets all 8" diameter.
Equipment Location:WEST COAST
Joe Retzlaff
800-374-5009 ext:348
CEMCO 2237 Wide Belt Sander (2) Heads37" Width cap. with Drum and Combination HeadHead Configuration: -- 1st Head: Rubber covered contact roll, 25 HP motor. -- 2nd Head: Combination head with contact roll and platen, 20 HP motor.Specifications: -- 103" Abrasive belt length. -- Electronic belt tracking & pneumatic belt tensioning . -- 1.5 HP Variable speed conveyor feed, 15 - 60 FPM. -- 0" - 6" thickness capacity. -- Rubber covered pinch rollers, anti-kickback fingers.Equipped with & Features: -- Load meters. -- 18" infeed extension. -- Air disk brakes on sanding heads. -- Emergency operator stop bar and dust hoods. Seller had the drum regound and the conveyor belt had been recently replaced and is like new.
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
CEMCO URF 2243 Wide Belt Sander (2) Heads43" Width cap. Drum, PlatenHead Configuration1st Head: Rubber covered contact roll, 10" dia., adjustable with dial indicator, 40 HP motor;2nd Head: 3-1/2" wide platen - 30 HPSpecifications -- 6" maximum working thickness --1 HP variable speed feed --43" x 75" abrasive belt size --Power raise and lower of feed bed --Numerical digital readout of thickness --Spring loaded hold down rollers through machine -- Feed speeds 15-60 FPM --Load meters --(2) 8" diameter dust outlets
Equipment Location:SOUTHEAST
Joe Retzlaff
800-374-5009 ext:348
CEMCO URF-2243 Wide Belt Sander (2) Heads43" Width cap. Drum, PlatenHead Configuration1st Head: Rubber covered contact roll, 10" dia., 65 shore, adjustable with dial indicator, 25 HP motor;2nd Head: 3-1/2" wide platen - 20 HPSpecifications -- 6" maximum working thickness --1 HP variable speed feed --43" x 75" abrasive belt size --Power raise and lower of feed bed --Numerical digital readout of thickness --Spring loaded hold down rollers through machine -- Feed speeds 15-60 FPM --Load meters --(2) 8" diameter dust outlets Equipped with & Features --Belt Tracking (Electric Eye) --Bed length 96" x 43" --Dust Collection 2,800 CFMAdditional InformationThis Machine is in very good condition, some people might be thrown off by the fact that the machine has no top cover, this is unique feature from the factory. it does have 2 dust collection ports one for each head, the reason they leave the top open is so that there is no restriction on the air removed by the dust collector, Increasing the flow of air to the machine. This machine has better dust pick up than most other machines available on the market.
Equipment Location:WEST COAST
Joe Retzlaff
800-374-5009 ext:348