• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
4 Results Found for Sander Viewing 1 - 4 of 4 results
RECENTLY ADDED
STANDARD LISTINGS
HEESEMANN LSM-8 Wide Belt Sander, (2) Heads53" (1,300 mm) Width cap., (1) Segmented cross-belt & (1) longitudinal combination head with segmented platen. Head Configuration: -- 1st Head: Segmented cross-belt, 5/8" wide segments (86 total) with "CTS" control, abrasive belt size 5.9" x 244", (5,400 mm X 150 mm ) inside chevron belt 5.9" x 191", sanding belt speed 5-12 m/s with 17 HP motor. -- 2nd Head: Combination head, with segmented polishing platen, 5/8" wide segments with CTS control, 17 HP motor, 106" x 53" ( 2,620 mm X 1,350 mm ) abrasive belt size.Equipped with & Features: -- Outfeed rotary panel cleaning brush. -- All heads have HESSEMANN's patented "CTS" selective pressure adjustment system, sensors spaced every 5/8" (16 mm) sense part configuration; (2) mm part thickness variation can be sanded without sand throughs, pressure for each segment can be pre-programmed to provide less pressure on the outer edges or more in the center if required. - The "CTS" computer control will hold approx. (20) programs or part configurations. -- Additional features: Outfeed rotary panel cleaning brush with single end adjustment, 2 HP motor, air blast abrasive belt cleaners on all heads. -- Variable feed speed from 13 to 82 FPM, 6.5 HP feed drive, motorized thickness opening 1/4" to 3-5/32" maximum.
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
HEESEMANN MFA-8 Wide Belt Sander (2) Heads; -- 53" Width cap. Finishing Platen, Brush Head.Great Lacquer/Sealer sander with: (1) Segmented polishing platen, (1) Composite/dense fiber brush head.Head Configuration: -- 1st Head: Segmented polishing platen, 5/8" wide segments (86 total) with "CSD" control, variable speed abrasive belt with inverter RPM control, .5 to 12 meters per sec. belt speed, 15 HP motor, abrasive belt size of 53" x 103". -- 2nd Head: Scotch Brite Brush type head for a composite/dense fiber loading, approx. 5 HP motor, manual height adjustment. -- LCD monitor with graphic display and key pad entry, 20 program capacity, pressure for each segment can be pre-programmed to provide less pressure on the outer edges or more in the center if required. -- Additional features: Air blast abrasive belt cleaner on 1st head. -- Variable feed speed from 10 to 49 FPM, 2 HP feed drive, motorized thickness opening 1/4" to 3-5/32" max. infeed feed, and outfeed rubber covered holddown rolls.
Equipment Location:WEST COAST
Joe Retzlaff
800-374-5009 ext:348
HEESEMANN LSM-8/3 Wide Belt Finishing Sander, 52" and (3) Heads;53" HEESEMANN LSM-8, ...3-Head Wide Belt Sander for Calibrating, Fine Finishing, or Sealer Sanding of Panels & Doors. -- Equipped with (1) Cross Belt, (1) Sectional platen and (1) large dia. Panel Cleaning or Denibbing Brush.Head Configuration: -- 1st Head: CSD Segmented cross-belt, electronic controlled segments conform to panel size, 20/27 HP motor dual speed abrasive belt speeds of 32 & 66 FPS; 6" x 189" abrasive belt. -- 2nd Head: Electronic sectional polishing platen, 17.5 & 20 HP dual speed motor; with HESSEMANN'S patented "CSD" selective pressure adjustment system, sensors placed every 5/8" (16 mm) sense part configuration, pressure for each segment can be pre-programmed on the outer panel edges or more in the center if desired, automatic line control for each platen. -- 3rd Head: Large dia. Panel Cleaning or Denibbing Brush, 2 HP motor.Other Specifications & Features: -- 54" x 103" Abrasive belts platen head with abrasive belt air cleaners. -- 1/8" - 3-15/16" Motorized Part thickness opening, constant passline height of conveyor bed assembly. -- Operator & Machine control with LCD screen monitor and alphanumeric keypad, control for all Sander functions with programmable storage.Feed System: -- Variable feed speed from 10 - 49 FPM, 3 HP feed drive with inverter control. -- Vacuum conveyor bed assembly with suction fan and 10 HP motor mounted in machine base; infeed & outfeed holddown shoes, infeed with segmented shoe. -- Computor controlled part thickness setting and abrasive belt blow-offs. -- Air loaded hold down shoe on infeed of 1st head, rubber covered holdown rolls on 2nd head. -- Includes: Electrical control console with load meters and all control switches for heads.
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
HEESEMANN MFA-8 D-32547 Wide Belt Sander (2) Heads; 53" Width cap. Finishing Platen, Brush Head.Great Lacquer/Sealer sander with: (1) Segmented polishing platen, (1) Composite/dense fiber brush head.Head Configuration: 1st Head: Segmented polishing platen, 5/8" wide segments (86 total) with "CSD" control, variable speed abrasive belt with inverter RPM control, .5 to 12 meters per sec. belt speed, 15 HP motor, abrasive belt size of 53" x 103".2nd Head: Scotch Brite Brush type head for a composite/dense fiber loading, approx. 5 HP motor, manual height adjustment.Specifications: --LCD monitor with graphic display and key pad entry, 20 program capacity, pressure for each segment can be pre-programmed to provide less pressure on the outer edges or more in the center if required. --Air blast abrasive belt cleaner on 1st head. -- Variable feed speed from 10 to 49 FPM -- 2 HP feed drive --Motorized thickness opening 1/4" to 3-5/32" max. --Infeed feed, and outfeed rubber covered holddown rolls.Equipped with: Rotary Panel Brush for denibbing and polishing
Equipment Location:WESTERN CDN
Joe Retzlaff
800-374-5009 ext:348