Planers For Sale

Porter Planer Model 700 S/N 5916, Straight Knifes 10HP Motor

Porter 715-A Top surface planerPorter Surfacemaster 715 Planer is ideal for for flattening and prepping lumberSpecifications -- 15HP, 3PH, 230/460V --3/4HP Elevation Motor -- Chain Driven Carpet Feed -- 24″ Wide Cutterhead with Dispozablade Knives(Comes with ITCH head as a alternate option) -- 8" Max Thickness Capacity -- Power Elevation -- Wixey Thickness DRO -- Spike InfeedEquipped with & Features -- Magnetic Start/Stop -- 6" Dust PortWeight is approx 6500lbsNOTE: This surfacer is a beast, and will operate with very little vibration due to its large cast iron frame. These machines are known to make chips, and are excellent for prepping or surfacing lumber. Machine was used prior in a cabinet shop, and is being sold as it was replaced with a double side planer.

POWERMATIC 221 PLANER WITH BYRD HELICAL HEAD20" x 8" Cap., 10 HP TEFC belted drive motor, BYRD Helical cutterhead, hand wheel micro-adjust table; 1 HP feed motor for variable speed from 20 - 50 FPM, segmented infeed roll and sectional chipbreaker, 4" dia. smooth outfeed roll. -- Complete with: Magnetic starter and dust hood.

Gently used Powermatic planer for sale. Call 800-459-2148 for more info.

Powermatic Model 100 12" Planer 3 Phase power

Powermatic Model 221 Planer

POWERMATIC MODEL 100 PLANER12" Cap., 5 HP 5,300 RPM belt driven main motor, 1/16" to 5" thickness opening, 3-1/8" dia. 3-knife cutterhead with high speed steel knives, 18 FPM fixed feed speed with in-out clutch -- Corregated infeed rolls; 12" x 24" precision ground cast iron table. 1/4" max. depth of cut, 7-1/2" min. stock length (unbutted). -- Complete with: Knife grinder, Magnetic controls, cutterhead guard with dust chute on enclosed steel stand.

SCM S 52 STRAIGHT KNIFE PLANER20" Width cap., knife cutterhead, 9 HP main motor (approx), 1/8" to 9-1/4" motorized opening with mechanical digital readout, max. depth of cut 5/16", 10" min. length of workpiece; (4) feed speeds at 21 - 32 - 42 & 55 FPM; table size 20-1/2" x 33-1/4". -- Equipped with: Chipbreaker, sectional grooved infeed & solid outfeed roller.

SCM S 630 Planer with Tersa HeadSpecifications: -- 24" Width cap.; 12 HP main motor, 2 HP feed motor; 4-3/4" dia. with reversable TERSA Head rotates @ 4,500 RPM; -- 1/8" - 11-3/4" Thickness opening via motorized bed with LED readout for fine adjustment. -- Max. depth of cut 5/16"; 10" min. length of workpiece; variable infeed speed from 20 - 56 FPM.Equipped with: -- 20-3/4" x 39" Cast iron table, sectional chip breaker, sectional grooved infeed & solid outfeed rollers, adjustable bed rollers.Complete with: -- Magnetic starter and dust hood w/6" dia. dust outlet.

20" (520 mm) Width cap.7,5 HP (5,5 kW) main motor ÷4-knife cutterhead÷1/8" to 9-1/2" (3 - 240 mm) ÷motorized opening mechanical scale for bed position max. depth of cut 5/16"÷10" min. length of workpiece ÷(4) feed speeds at 18/30/39/51 FPM (6/10/13/17 m/min.)÷table size 20-3/4" x 33-1/4". ÷Includes: Knife sharpening attachment ÷ Equipped with: Chipbreaker, sectional grooved infeed & solid outfeed roller.

SCM - S520 E, ...Planer Specifications: -- 20" Width cap., 9 HP main motor - 4-3/4" dia. 4-knife TERSA cutterhead at 4,500 RPM. -- 1/8" - 9-1/4" Powered opening with digital readout for fine adjustment; max. depth of cut 5/16"; 10" min. length of workpiece. -- (4) Feed speeds: 20 - 33 - 43 & 56 FPM; table size 20-3/4" x 39".Equipped with: -- Chipbreaker, sectional grooved infeed & solid outfeed rollers, (2) adjustable bed rollers. -- Complete with: Magnetic starter & shaving hood.

Motor Horsepower 12 HP Working Width 630mm (24 3/4”) Working Height 3 – 300mm (1/8” – 11 3/4”) Max. Depth of Cut 8mm (5/16") Minimum Length of Stock 260mm (10 1/4”) Cutter Head Diameter 120mm (4 3/4") RPM 4500 No. of knives 105 Knife Dimensions 15mm x 15mm x 2.5mm Table Size 630mm x 1000mm (24.75” x 39.4”) Feed Speeds (Variable) 4 - 20 m/min (13 - 65 FPM) Infeed Roller Steel sectional, power driven Outfeed Roller (x 2) Rubber, power driven Dust Hood Diameter 150mm Noise Level (dB) 70 Overall Dimensions (L,W,H) 51" x 40" x 45” Shipping Weight 1230kg (2,710 lbs) Net Weight 1155 kg (2,550 lbs) Electrical Requirements 45 amps @ 230 volts Dust Extraction 980 CFM

SCMI 24" Planer Model Class S630 Xylent Xylent Spiralknife

SCMI S630 Planer Capacity 24” x approx. 10” Straight 4-knife cutterhead Sectional chipbreaker and sectional infeed roller Cutterhead motor: 12HP, 230v (currently wired)/460v, 3PH 39” long bed with (2) idler rollers 2 rubber coated outfeed rollers with air assist Motorized raise/lower Includes manuals Solid machine. Currently replacing all bearing and thoroughly cleaning down to the bolts. Operating Instructions, Parts manual, wiring diagram included. Extra set of knives included. Weighs 2000lbs+

SCMI S630K Planer 10 HP Motor Straight Knives

STETSON ROSS Planer Feedtable - Model 503E pineapple feed table. Nice unit. Opens to 8" tall material.

---In Auction---Good Condition---Heavy-Duty--- TIMESAVERS 343-1 43" W Single-Head Abrasive Planer Specifications: - Thickness cap. 0 - 6". - Feed speeds 20 to 60 FPM. Equipped with: - 11-1/2" Dia. Smooth steel contact roll, with 100 HP Motor with Brake. - Double 2-3/4" infeed & outfeed hold-down rolls. - 43" x 75" Abrasive belt, with Electronic tracking, Automatic self-centering system, & Pneumatic belt tensioning. - Hydraulic feed, with 5 HP Hydraulic unit. - Motor load meter. - Safety bar stop. Complete with: - Owners Manual. Details, Photos, Bidding: https://exfactoryauctions.com/Detail/AP-232006/event/A051324$1

--at Auction, Seller Loading, (2) 75HP Motors, Built to Last!-- TIMESAVERS 352 HDA 51" 2-Head Abrasive Planer/Sander 2-Head, 51" width cap. Heavy Duty Sander. - 1st Head: Smooth steel contact roll, 11-1/2" dia., 75 HP motor. - 2nd Head: Spiral Grooved hard rubber contact roll (11-1/2" dia.) , 75 HP motor; 52" x 103" abrasive belts (6,300 & 4,300 SFPM) with POSI-TRAK electronic tracking. Equipped with: - Heavy-Duty solid rubber (no vacuum holddown) feed belt for Heavy-Duty operation. - Motorized part thickness adjustment, 0" - 6" opening. - 38" - 32" Conveyor height passline with MITUTOYO LED readout, conveyor belt feed. - 5 HP Variable feed speed from 20 - 60 FPM, smooth rubber conveyor belt. - Infeed & outfeed spring loaded holddown shoes, infeed emergency stop bar, anti-kickback fingers on infeed. - Disc brakes on sanding head motors, 18" infeed load area, and motor load meters on sanding heads.

Slab surfacers are designed for planing and sanding any large surfaces such as, but not limited to, table tops, countertops, fireplace mantels, and timbers and are exactly the same except the width. the SS-96 can be used on the 96” ground bed track and planes up to 96” wide surfaces. Both come with 35HP gas Briggs VanGuard engine that powers a direct-drive double hydraulic pump to power the machine. This is a rugged heavy duty machine for the serious woodworker. Comes standard with cutter head and an extra set of carbide inserts and sanding head with 10 pieces of sandpaper. Can also be used on concrete slab track if customer builds their own slab holding and clamping table. The dust collection blower kit will increase the production of these machines. Does not include track or power feed roller chains.

This slab surfacer is the same as GSS-70 gas engine powered surfacer, except they are powered by a 30HP 3-phase techtop electric motor available in 460 or 230 volt. Comes standard with start-stop switch to mount on surfacer, 50’ of wire between motor, and soft start mounted in a safety disconnect enclosure. The dust collection kit will increase production of these machines. There is no price difference between 460 & 230 volt. Does not include track or power feed roller chains.