Ben Jones Machinery
 800-241-8983
 706-324-2604

We are the oldest and most trusted dealer of used sawmill and wood processing machinery in the eastern United States. We buy and sell used sawmill and lumber processing machinery with an emphasis on equipment suited for small to medium production operations.

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 2
37 Results Found
Sort By 
Ben-Jones-Machinery
 800-241-8983
 706-324-2604
2004 American Wood Dryers 75 MBF  Dry Kiln
Call for Price

AMERICAN WOOD DRYER KILN - 3 chamber package type dry kiln. New 2004. Very good condition. Requires low pressure steam (15 psi). 4 VFD controlled fans in each camber. Includes control room with kiln controls. Capacity approximately 25,000 board feet of 4/4 per chamber for a total of 75 MBF. Dimensions available on request.

 Columbus, GA
 706-324-2604

 Call
1994 American Wood Dryers 100MBF  Dry Kiln
Call for Price

AMERICAN WOOD DRYER KILN - 2 chamber package type dry kiln. New 1994. Very good condition. Requires low pressure steam (15 psi). 5 VFD controlled fans. Includes controls and boiler room (boiler available). Capacity approximately 50,000 board feet of 4/4 per chamber for a total of 100 MBF. Dimensions available on request.

 Columbus, GA
 706-324-2604

 Call
 Arasmith ARASMITH  Hogs and Wood Grinders
Call for Price

ARASMITH Bark Grinder - 45 x 63-1/2 inch top feed opening drum style bark hog. Features 50 inch diameter drum with fixed teeth. Serial HH-1368-692. Top feed, bottom discharge. 20 tons per hour or more capacity. 200-300 HP recommended. see our entire inventory at www.benjones.com

 Columbus, GA
 706-324-2604

 Call
 Baker Products Band  Scragg Mill
Call for Price

Baker Band Scragg - 2017, ~250hrs; 16" diameter, 10' length capacity; hydraulics setworks.

 Columbus, GA
 706-324-2604

 Call
 Brewer 6-Head  Resaw-Band
Call for Price

Brewer Resaw - 6 head machine; 20hp motors on each head; lots of new parts have been installed

 Columbus, GA
 706-324-2604

 Call
1982 Caterpillar V160B  Forklift
$12,000

CAT Forklift -1982 model V160B Forklift, 3208 CAT (V8) diesel engine, 68'' forks; air brakes, 16,000 lb capacity.

 706-324-2604

 Call
 Corley KOCKUMS/ CORLEY  Resaw-Band
Call for Price

KOCKUMS 6' left hand resaw with CORLEY linebar attachment. CAN SEE MORE AT www.benjones.com. ALL PICTURES OF THIS ARE ON OUR WEBSITE.

 Columbus, GA
 706-324-2604

 Call

Call for Price

 Cornell 6 Head  Trimmer
Call for Price

Cornell 20 ft 6 Head Multi Saw Trimmer, No Starter Package, Control Console. Waste and Board Conveyor, Even Ending Rolls

 Columbus, GA
 706-324-2604

 Call

Call for Price

 HMC Corp   Trimmer
Call for Price

HMC 2 Saw Trimmer, 6' - 16', new set works w/Sevo motor rebuilt left hand unit.

 Columbus, GA
 706-324-2604

 Call

Call for Price

 HMC Corp 2 Saw  Trimmer
Call for Price

HMC Trimmer - 2 saw trimmer model ET-10 with 15 HP saw motors and hydraulic setworks. Includes waste conveyor belt. Cuts up to 8" thick and up to 20' long. Right hand.

 Columbus, GA
 706-324-2604

 Call

Call for Price

 HOLTEC USA   Package Saw
Call for Price

Holtec Portable Package Saw

 Columbus, GA
 706-324-2604

 Call
 Jeffrey  54 WB Wood Hog  Hogs and Wood Grinders
Call for Price

JEFFREY Wood and Bark Hog Model 54 WB. See our complete inventory at www.benjones.com

 Columbus, GA
 706-324-2604

 Call
 Klamath   Band Mills (Wide)
Call for Price

KLAMATH Band Headrig - 7' Right Hand bandmill with off-bearing live rolls and wheel guard. Very good wheel thickness. Dependable weight strain. Excellent condition. Item # 40126.check out our full inventory at www.benjones.com

 WAVERLY HALL, GA
 706-324-2604

 Call

Call for Price

 Kockums Cambio  Debarker
Call for Price

Kockums 30" Cambio Ring Debarker - includes hydraulic powered feed rolls with pump unit and air tensioned tool arms.

 Columbus, GA
 706-324-2604

 Call

Call for Price

 Ligna   Trimmer
Call for Price

LIGNA Sawmill Trimmer - operator and controls on right hand side of infeed. Includes odd length saw and PLC controls. Console has buttons for cut back options on near and far end. Also includes lug loader, even-ending rolls and optigate. Very nice machine.

 Columbus, GA
 706-324-2604

 Call
 Ligna 6 Strand  Unscrambler
Call for Price

LIGNA Unscrambler - nice 6 strand unscrambler with even-ending module.

 Columbus, GA
 706-324-2604

 Call

Call for Price

 McDonough   Resaw-Band
Call for Price

McDONOUGH 62" Horizontal Resaw - very nice late model horizontal resaw with setworks and infeed.

 Columbus, GA
 706-324-2604

 Call
 McDonough 6A  Band Mills (Wide)
Call for Price

McDONOUGH 6' Band Headrig - Model 6A right hand, air strain bandmill with off-bearing belt, hydraulic opening factory hood, McDonough factory guides. Runs 12" wide bands. V-belts included.

 Columbus, GA
 706-324-2604

 Call
 Mellott #5  Log Turner (Sawmill)
Call for Price

MELLOTT Log Turner - #5 chain type, hydraulic log turner with pump, tank and controls.See our complete inventory at www.benjones.com

 Columbus, GA
 706-324-2604

 Call
 Metal Detectors Inc NEW In Stock  Metal Detector
Call for Price

New MDI digital metal detector designed for detecting metal under a vibrating conveyor or vulcanized belt conveyor. See our entire inventory a www.benjones.com

 Columbus, GA
 706-324-2604

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved