• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
3 Results Found for Planer Viewing 1 - 3 of 3 results
RECENTLY ADDED
STANDARD LISTINGS
STETSON-ROSS 612-A1 4-Sided Planer/Matcher;12-Knife Planer Matcher with the following major components and features: -- Top and bottom head 50 HP. -- Feed drive 40 HP. -- Top profile 40 HP. -- Bottom profile 25 HP. -- Outside side head 40 HP. -- Inside side head 25 HP. -- Number knifes: 12 -- Length of knives: 20 inches. -- Feed speed 600 – 700 FPM.NOTES: ● Planer was totally rebuilt and in stored in heated container. ● To be sold as is where is in heated container.
Equipment Location:WESTERN CDN
Jeff Terrill
800-374-5009 ext:349
USED STETSON-ROSS MODEL 6-12-C1 16-KNIFE (EXTRA FOR 24-KNIFE) HIGH SPEED PLANER MATCHER WITH: -- Cartridge Style Double Profiler -- Air Chipbreakers -- Hydraulic Roll Tensioning With Air Cushion On 1st. Top Infeed Roll -- Key Knife Quick Change Reversible Knives On Top And Bottom, 24-Knife (Copy this link to see more about Key cylinders: keyknife.com) -- 8” X 15” Capacity -- Top Head with (2) 65 HP Motors -- Bottom Head, 65 HP -- Left Side, 65 HP -- Right Side, 25 HP -- Top Profile, 65 HP -- Bottom Profile, 25 HP -- Variable Frequency Planer And Infeed Table Drives -- Planer Feed Motor, 50 HP -- Feed Table Motor, 25 HP -- No. 2 Taper Sidehead Spindles -- Full Set Jointers -- 24’ Stetson-Ross Model 505 Double Pineapple Planer Infeed -- 12’ Stetson-Ross Angled Roll Live Bridge -- NOTE: Planer has been cleaned and painted but has not been test run and therefore, it is quoted "As Is". Machine can be test run or even reconditioned if desired. Planer has not been in operation for approx. 18-months
Equipment Location:PACIFIC NORTHWEST
Jeff Terrill
800-374-5009 ext:349
Complete STETSON ROSS Planer Line consisting of the following: Stetson-Ross "614-D-1" with double profilers; 1" to 6" thickness x up to 14" width capacity.Specifications: -- Solid 1-piece cast frame heavily ribbed and stress annealed; feedworks cast integrally into frame where feedchain, sprockets and gears run in oil. -- With (6) powered 12" dia. feed rolls, (2) pair at infeed and (1) pair at outfeed; infeed rolls knurled and chromed; outfeed rolls sandblasted and chromed; steel feedworks gears and sprockets on heavy ball or roller bearings throughout feedworks; all roll shafts from alloy steel. -- Top and bottom cylinders with 14-knife, 9-3/8" cutting circle using 14" x 2" x 5/32 knives; top and bottom heads interchangeable for wear; each cylinder mounted in (2) large heavy duty, single row, deep groove precision ball bearings; (2) bearing anti-whip construction on all spindles and cylinders. -- Chipbreakers with anti-snipe design; variable pneumatic tension to chipbreakers for long wear; outside sidehead chipbreaker uses ski-type shoe similar to top cylinder chipbreaker. -- Side heads with #2 Stetson-Ross taper; 9-3/8" side head cutting circle. NOTE: Main wear parts are hard chromed - bed plates, chip breaker shoes, feed rolls, etc.Motor Power: -- Equipped with Allen Bradley Soft Start Starters and variable frequency feed drive for Planer Feed Table. Cutterhead motors are of specially designed with 300% pull-out torque for planer duty on all cutterheads, provides intermittent capacity to plane oversize pieces or bullheads. -- Motor power: Top cylinder with 150 HP (2 x 75 HP), 75 HP bottom cylinder, 30 HP outside and inside spindles; 25 HP top and bottom profile spindles with removable cutterheads; 3/4 HP top infeed roll hoist, 3/4 HP top cylinder hoist, and 3/4 HP top outfeed roll hoist. NOTE: Most of the copper wire between the MCC and machine have been stolen.System includes: -- 5-Strand 12' x 10' chain deck @ infeed -- 5-Strand 20' x 18' chain deck @ infeed -- Planer Feed Table with 25 HP variable seep drive. -- Planer out feed roll case -- Roll case Kick-off onto 13' x 17' 5-strand outfeed chain deck. -- See pictures for details. -- Electrical equipment arranged for 480-Volt operation; other voltages easily possible via transformer. -- A Breakdown Hoist is also included.Additional parts included with the Planer include: -- (5) 12 X 2 Planer heads and profiles cartridge -- (2) 4 x 2 pattern side head, (1) Profile cartridge with cutterhead -- (1) Profile cartridge with saw(s) -- (2) Profile cartridge -- (1) Profile cartridge with cutterhead -- (1) Lot of assorted planer steel -- (1) New Stetson Ross 6-knife top head cylinder complete -- (1) Knife setting gauge -- (1) Parker hydraulic motor -- (4) Air cylinders -- (1) Stetson-Ross bottom head -- (1) Receiving plate -- (1) Main guide bar -- (1) Bottom head receiving plate -- (3) Knurled infeed rolls -- (1) Stetson-Ross top head -- (1) Stetson Ross bottom bed pl
Equipment Location:SOUTH
Jeff Terrill
800-374-5009 ext:349