• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
7 Results Found for Sander Viewing 1 - 7 of 7 results
RECENTLY ADDED
STANDARD LISTINGS
DMC UNISAND 2000-M3 Wide Belt Sander (3) Heads; --43" Width cap. Drum, Drum, Platen.Head Configuration: -- 1st Head: 11" dia. Rubber Covered Contact Drum, Motor: 33 HP. -- 2nd Head: 11" dia. Rubber Covered Contact Drum, Motor: 33 HP. -- 3rd Head: 2-1/2" Finishing Platen, Motor: 28 HP.Specifications: -- 43" x 103" Abrasive belts with electronic tracking. -- Shoe & Roller Hold-Downs. -- Hydra 35 Computer controlled set-up functions with key pad and LCD screen. -- Conveyor belt feed with variable feed speed from 11 - 60 FPM, 6.4 HP feed drive. -- Vacuum conveyor bed with 12 HP motor and suction fan. -- Automatic conveyor belt tensioning & tracking. -- Motorized part thickness opening with LED readout, 1/8" - 4" max opening, automatic part thickness set-up sensor. Equipped with & features: -- Infeed safety stop. -- Outfeed emergency stop. -- Motor load meters. -- 2-Roll infeed conveyor extension. -- High efficiency dust extraction.
Equipment Location:WESTERN CDN
Joe Retzlaff
800-374-5009 ext:348
DMC 1350 RK TECHNOSAND DUAL HEAD WIDE BELT SANDER2-Heads, 52" width cap. - Head sequence: Contact sanding roll, segmented platen. Head Configuration -- 1st Head: 7" (175 mm) Diameter, 85 durometer rubber covered calibrating contact sanding roll. -- 2nd Head: Segmented finishing platen with EPICS (sectional electronic pad) with (46) electronically controlled air segments. -- Specifications: -- 53" x 103" Long abrasive belts with electronic tracking on all wide belt heads. -- Turbo Panel Blowers, Timed Abrasive Belt air cleaners. -- DMC "Hydra 35" control, "EPICS" control for sectional platens, (99) programs. Graphic screen for machine configuration, +/- control on segmented platens, abrasive belt cleaners, -- Sequential automatic start-up, machine trouble shooting and self-diagnosis. -- Variable feed speed from 15 - 60 FPM (4.5 - 18 m/Min), 1.5 HP feed drive, vacuum conveyor bed with 7.5 HP suction fan and motor.Equipped with & Features -- Automatic conveyor belt tracking, infeed & outfeed holddown pinch rolls or shoes on all heads, -- 0" - 4" motorized programmable thickness adjustment with LED readout. -- Automatic part thickness adjustment, infeed hand safety stop, outfeed emergency stop. -- Motor load meters, and control console with monitor & keypad.NOTE: -- 2017 The calibration roller and new bearings were replaced . -- 2017 The controller was totally redone due to electrical issue. -- Includes multi-port dust manifold
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
DMC POLISAND 130, 4-Head Bottom & 4-Head Top Sanding Line; 52" Width. Head sequence BOTTOM: -- 1st Head: Steel contact roll, 35 HP motor; -- 2nd Head: Rubber covered contact roll, 30 HP motor; -- 3rd Head: Rubber covered contact roll, 20 HP motor; -- 4th Head: Sanding pad (platen), 15 HP motor. Head sequence TOP: -- 1st Head: Steel contact roll, 35 HP motor; -- 2nd Head: Rubber covered contact roll, 30 HP motor; -- 3rd Head: Rubber covered contact roll, 20 HP motor; -- 4th Head: Sanding pad (platen), 15 HP motor. Specifications: -- 53" x 103" Long abrasive belts with electronic tracking; variable conveyor bed feed speed from 11 - 60 FPM, 1/8" - 4" motorized part thickness opening with LED readout. -- Constant passline of conveyor bed assembly, infeed & outfeed holddown pinch rolls on all heads, infeed hand safety stop, outfeed emergtency stop.Complete with: -- Control Cabinet with Motor Load meters and function buttons; controls mounted on right-hand side of the infeed. -- High efficiency dust extraction,Actual model number is "POLISAND PS IP 130 RRR / PS 130 RRR".
Equipment Location:EASTERN CDN
Joe Retzlaff
800-374-5009 ext:348
TOPSAND 2000 Wide Belt Sander with (4) Heads:53" Width cap. and with Cross belt, Contact roll, Contact roll, and Platen. Head Configuration:1st Head: TA5 Cross belt with "EPICS" system, 48-segment electronically controlled air platen, inside Chevron belt 6" x 258" long, and 6" x 335" long abrasive belt, 20 HP 2-speed motor.2nd Head: RLT Rubber covered contact roll, 15" dia., helically grooved 85 durometer rubber surface, 40 HP Motor, 128" Belt.3rd Head: RLT Rubber covered contact roll 15" dia., helically grooved 45 durometer rubber surface, 34 HP Motor, 128" Belt.4th Head: "Superfinish" Platen with "EPICS" system, extra wide 48-segment (30 mm center to center on segments) electronically controlled air platen with inside Chevron belt, 4" wide Platen, 25 HP 2-speed motor.Features reversing head rotation, 55" x 100" long Chevron belt, 55" x 128" long abrasive belt with electronic tracking.Additional Equipment & Features: -- Panel Cleaning Unit: 10" Dia. Oscillating Panel Cleaning Brush with Turbo air blower. -- Has whirly bird air blowers on the outfeed of the machine to clean panels. -- "EPICS" Sectional Pads can be activated as sectional or whole pad operation. Feed System: -- 7.5 HP Variable Speed Feed Drive (3.5 - 28 m/Min), integrated vacuum bed, PC Controlled. Integrated PC Control: -- "Hydra PC" with 12" LCD Touch Screen Display, Interactive graphic representation of the machine with the ability to operate and view all parameters in real time. -- Control Thickness, control feed speed, control timing of panel cleaners, control positioning of each sanding unit, and can be connected to a "Virtual Technician" for quick troubleshooting. Comes with: Some spare parts and with cross-belt sandpaper left in inventory and Dust Collection Manifold.
Equipment Location:SOUTHEAST
Joe Retzlaff
800-374-5009 ext:348
DMC TOPSAND 1350 Wide Belt Sander, (4) Heads 53" Width cap. Wide Belt Sander with Crossbelt, Drum, Segmented Platen, Segmented Platen.Head Configuration:1st Head: Segmented Crossbelt w/Air Segments, 6" x 238" Long Abrasive Belt & 228" Inside Chevron Belt, 25 HP, 2-Speed motor.2nd Head: Rubber Covered Contact Drum 10" Dia., 18 HP, 2-Speed motor.3rd Head: Segmented Finishing Platen w/Air Segments, 25 HP, 3-Speed motor.4th Head: Segmented Finishing Platen w/Air Segments, 25 HP, 3-Speed motor.Specifications: -- Min. thickness 3 mm & max. thickness of material 160 mm. (6-1/4"). -- Constant Pass Line with Head assembly adjusting. -- Variable Speed 11 to 60 FPM, 5 HP feed drive. -- Vacuum conveyor belt with suction and fan motor. -- Outfeed rotary cleaning brush along with turbo panel blowers; timed abrasive belt air jet cleaners.Equipped with & Features: -- Automatic conveyor belt tracking. -- Infeed/outfeed hold-down pinch rollers on all heads. -- Automatic part thickness adjustment; -- Infeed/outfeed safety stops and motor load meters.NOTE: Machine has very low production hours, only used for (4) years. Machine has brand new controller and controller card
Equipment Location:WEST COAST
Joe Retzlaff
800-374-5009 ext:348
DMC US 1350-1 M3 Wide Belt Sander, 3-Head BOTTOM Sander3-Head bottom sander 52" width cap., All heads configured with contact rolls. This is a Bottom head sander, the top head machine is not included in the setup. This could be a good addition to a Top sanding line or a replacement for an existing bottom head sander. The machine is not under power and can not be tested, it is said to be in working condition and per the photos it does look good but it is priced Low to leave room for you to upgrade or rebuild as needed prior to going into production.Specifications: -- 1st Head: Steel contact roll 10" dia., 30 HP motor. -- 2nd Head: Rubber covered contact rolls, 10" dia. and 70-shore, 30 HP motor. -- 3rd Head: Rubber covered contact rolls, 10" dia. and 70-shore, 30 HP motor -- Outfeed rotary panel cleaning brushes, -- 53" x 103" Abrasive belts, electronic belt tracking & air tensioning, all heads with air blast belt cleaners & timers. -- Variable feed drive, feed speed from 6 - 40 FPM, 5.5 HP inverter controlled drive, infeed & outfeed holddown shoes on all heads. -- Motorized thickness opening with keypad & LED readout from control panel, automatic part thickness opening from 1/8" to 4-5/8" --motor load meters, -- Emergency stop systems for abrasive belt breakage, low belt tension & open access doors. -- Vacuum Blower
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348
D M C SYSTEM SY B2H 2200 + T2H ... TOP & BOTTOM Wide Belt Sanding Line, equipped with (2) contact rollers.Working width 2,200 mm (86-5/8"). Including in & outfeed roller conveyors with driven rollers and synchronized feed speeds. Head configuration bottom sander: -- 1st Head: BOTTOM Steel contact roller, 400 mm dia (15-3/4"), spirally grooved, with 37 kW (50 HP) motor. Electronic Grit-Set, activated through HYDRA Control. -- 2nd Position: High speed air curtain for part cleaning with dust extraction hood opposite. Head configuration top sander: -- 1st Head: TOP Steel contact roller, 400 mm dia (15-3/4"), spirally grooved, with 37 kW (50 HP) motor. Electronic Grit-Set, activated through HYDRA Control. -- 2nd Position: High speed air curtain for part cleaning with dust extraction hood opposite.Sanding heads use 2,620 mm long, and 2,220 wide (103" x 97") abrasive belts. -- Feed system: ● Constant Pass Line. ● Variable feed speeds 3.5 - 23 m/Min (11 - 75 FPM). Driven by 4 kW (5.5 HP) motor. ● Motorized part thickness opening, min/max. part thickness 4 - 200 mm (3/16 - 7-7/8"). ● Automatic part thickness adjustment. ● Vacuum bed assembly with 4 kW (5.5 HP) motor. ● Infeed safety bar for operator protection and over-sized parts. ● Including in & outfeed roller conveyors with driven rollers and synchronized feed speeds. -- Machine management system: ● DMC HYDRA V-PAD on control panel, front mounted. ● Control and supervision of all major machine functions and adjustments like thickness, feed speeds, activating of timed blowers for abrasive belts, trouble-shooting and failure diagnosis. ● Computer control system with 10.4" Touch-Screen with storage capacity for (120) sanding programs. -- Features & Includes: ● Electronic sanding belt tracking. ● Pneumatic sanding belt tensioning. ● Blowers for sanding belt cleaning. ● Automatic shut-off in case of pneumatic pressure loss. ● Motor load meters. ● Emergency stop at in & outfeed. ● Transformer to run on 208/230/460/600V, 60 Cy, 3 Ph. -- Footprint: LxWxH 12,400 x 3,800 x 3,000 mm (40' x 12.5' x 10'). -- CE Compliant.Price is landed USA incl. duties.Actual model is D M C SYSTEM SY B2H 2200 + T2H ... TOP & BOTTOM Wide Belt Sanding Line
Equipment Location:MIDWEST
Joe Retzlaff
800-374-5009 ext:348