Sanders For Sale

OLIVER - Model "M-5360.002 25″: Double-head Wide Belt SanderHead Configuration1st Head. Drum.2nd Head. Combination head.Specifications -- 25" Width capacity. -- Belt length: 75″.Equipped with & Features -- Operators Manual. -- Misc. supplies and several extra belts.

POWERMATIC - WB-37: Wide Belt SanderSpecifications -- 1-Head; 37" width cap.; combination sanding head with: 4" Dia. rubberized contact roll; 2" wide polishing platen; 20 HP motor.Power raise-and lower with: 1/2" HP motor. -- Abrasive belt size: 37" x 60"; Air tensioning; electronic abrasive belt tracking; 2 HP conveyor with: Variable speed feed; 18 - 72 FPM; 0" - 5" opening with: (4) Screw jacks; double infeed & outfeed rubber-covered holddown rolls.Digital read out displays thickness.Minimum board length: 10-1/2". -- Complete with: Infeed conveyor extension; safety stop bar; 6" dust port; load meter.Includes: Owner's manual; tool kit; parts list.

POWERMATIC - RB-37, ...Single Head Wide Belt Sander1-Head, 36" width cap., combination sanding head. -- Includes: 4" Dia. contact roll & 2" wide polishing platen, micro-adjust platen; 15 HP main motor. -- Abrasive belt size: 37" x 60"; with air tensioning, air jet abrasive belt tracking. -- 1 HP Feed drive; variable feed speed of 15 - 30 FPM conveyor speed. -- 0" - 5-1/4" Opening with: (4) Screw jacks; double infeed & outfeed rubber-covered hold-down rolls. -- Complete with: Magnetic starter; overload protection; load meter; emergency brake.

Make an offer - Machine is in an Ex-Factory Liquidation. 4-Station Profile Shaper Specifications: 6" Chain drive with non-marking rubber top pads traveling on a hardened and ground precision dia. 5/8" round rods, Top pressure beam driven, Heavy duty fabricated transporter frame, Forward and reverse mode and block mode for creating sanding tools Precision X & Y axis mounting stands, 60° rotating tilt on mounting stands with positive lock, Independent activation control at each station, Adjustable infeed fence system, All dust hoods and guards, 2 HP AC variable speed gear drive 5 to 60' per min. Workstation 1: 3.5 HP TEFC Saw Arbor Motor, 1" Dia. Spindle, Dust Hoods with 4" outlet, Mounted on precision X & Y slides Workstation 2 & 3 - Belt Sanding Unit: 2 HP AC motor drive, Air belt tension system, Independent belt tracking system, Air activated sanding pad with touch control, 2" sanding belt width, Guards and Dust hoods with 4" outlet Workstation 4 - Wheel Sanding Unit: 3" HP variable speed (0-3,400 RPM) AC TEFC drive motor, 1" or 1.25" arbor 3.5" long, Dust Hood with 4" dia. outlet, Mounted on precision X & Y slides SPECIAL NOTE: Needs New PLC or wire for traditional controls NOTE: Above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

PROGRESS PMC 312-6 STROKE SANDER10' x 30" Sliding table (on ball bearing steel rollers), manually operated stroker pad travels on ball bearings; motorized raise/lower of table for up to 24" vertical opening, 7.5 HP - 1,750 RPM TEFC main motor, 10" dia. pulley x 6-1/4" face, drive pulley rubber covered, 6" wide x 312" long abrasive belt, abrasive belt speed 4,300 SFPM. -- Complete with: Magnetic starter, dust hoods on both ends.

QUICKWOOD CD2-300 Moulding & Profile Sander or Denibber;4-Head Brush Loading Sander, 12" width and 4" height cap., for 3-sided sanding & denibbing. Head Configuration: -- (2) "BH300" Overhead rotating abrasive/brush heads, both arbors equipped with a combination of abrasive and brush loadings, 12" long arbors, 12" max. dia. sanding discs. -- 0.75 HP Motor drives each arbor with inverter for 200 - 1,200 RPM arbor rotation speed. -- Right & Left ("BH-140" & "BH-100" respectively) side mounted rotating abrasive/brush heads. -- Tilting heads and adjustable in-and-out, 6" long arbor, 8" dia. sanding discs, 0.5 HP motor each head. -- 0" - 4" Max. manual part height adjustment via hand wheel; 57-1/2" long roller conveyor with PVC covered rollers, variable feed speed 10 - 60 FPM. -- Infeed & outfeed overhead holddown rolls and (1) between the top heads. Includes centralized control panel, hubs, abrasive, & brush. -- Can also be ordered with just (2) top heads or (3) heads, ie. Left or Right. Call for separate prices.

8 or more brushes arranged at 360 ° with respect to the work pieces Adjustable inclination for the profile step QRC module for the super finishing of the flat parts in view

Quickwood Pro 1100 Sander

Quickwood RO 1300 Sander

Width Capacity: 1,100mm (43.3") Thickness Capacity: 100mm (3.93") Eight Variable Speed Brushing Heads on a Rotating Carousel Variable Rotation of Brush Heads: 300 - 1150 RPM Four 2 HP Brush Head Motors, Each Driving Two Heads Variable Rotation of Carousel: 3 - 16 RPM Carousel Drive Motor: 2 HP Thickness Adjustment Motor: 0.6 HP Variable Speed Feed from 6-36 FPM Feed Motor: 2 HP Touch-Screen User-Interface Internal Blower for Vacuum Bed, 5.3 HP Includes Two New Complete Loadings of Sandpaper One 100 Grit and One 120 Grit Voltage 220v, 3ph

Ramco Mdl 25 18 Wide Belt Sander S/N 1940

Ramco Mdl 1800B/84 Wide Belt Sander S/N 25S1

Ramco Wide Belt Sander Model 37T/84 480V

RODGERS - 40-A: Edge Sander (Non-Oscillating) -- SpecificationsNon-Oscillating; 5 HP - 1,725 RPM motor with: Tracking & tensions adjustments & magnetic switch; 10"-wheel drive. -- 6" Wide x 168" long belt; 6" x 74" steel platen. -- 11-1/4" x 50" Front table with: 10" Vertical adjustment.

SAC - PRIMA K 630, ...Single Head Sander24" Width cap single head. -- Combination sanding head with: 4-3/4" Dia. grooved rubber contact roll & 2" wide polishing platen. -- 7.5 HP Motor; abrasive belt size 25" x 75" with air tensioning & electronic abrasive belt tracking. -- Dual feed speed 15 or 31 FPM; infeed & outfeed rubber-covered holddown rolls. -- 6-1/4" Motorized thickness adjustment by 0.5 HP motor with: LED Readout, and automatic part thickness adjustment; micro switch; 7" dust hood opening. -- Complete with: --: Emergency stop button, motor load meter, and selection of belts.

SAC - CLS/D 1100: Dual Head Wide Belt SanderHigh quality.Designed for precision finishing of: Wood panels; cabinet components; solid stock. -- Italian-built industrial machine in fully functional working condition.

SAFETY SPEED 3760 WIDE BELT SANDERHeavy welded construction minimizes vibration and ensures consistency in sanding.Specifications: -- Single-head 37" wide Combination Sanding Head. -- Rubberized 4-1/4" dia. contact drum with a 2-1/2" finishing platen. -- Hand wheel to manually change the thickness setting form 0" - 7-1/4". -- 15 HP 3-Phase motor main drive motor. -- 37" x 60" Abrasive Sanding belts. -- Pneumatic belt tensioning and infrared electric eye tracking. -- 1-1/2" Dia. infeed & outfeed rubber covered holddown rollers. -- Infeed safety stop bar, emergency stop button and 6" dia. dust outlet. -- Available Options: Hour meter and 15 HP, 3-Phase motor, and digital readout for conveyor bed opening. -- Dimensions: 50-1/2" L x 47" W x 63" H (Crated Dimensions - 55-1/2" L x 52" W x 68MODEL 3760 Single Phase: $ 15,499.00

SAFETY SPEED MODEL 4375 WIDE BELT SANDERHeavy welded construction to minimize vibration and ensure consistent sanding. -- Single 43" Wide combination sanding head. -- Rubberized 5-1/4" contact drum with a 2-1/2" wide finishing platen. -- Hand wheel to manually change the thickness setting form 0" - 7-1/4". -- DC Conveyor drive with variable feed rate of 0 - 18 FPM. -- 43" x 75" Abrasive belts. -- Pneumatic belt tensioning and infrared electric eye tracking. -- 1-1/2" Dia. infeed & outfeed rubber covered holddown rollers. -- Infeed safety stop bar, emergency stop button and 6" dia. dust outlet. -- Avaialble Options: Motorized conveyor setting; Hour meter; Digital height setting; and 20 or 30 HP 3-Phase motor. -- 53" L x 56" W x 70" H (Crated Dimensions - 58" L x 61" W x 75" H).MODEL 4375 Single Phase: $ 21,499.00

SAND-RITE DB-612 DLX Sander with Heavy Duty Cast Iron StandCustom ordered to fit your requirements with quick 3 week lead-time!Specifications: -- (1) 6" Diameter x 7" Wide pneumatic drum head , which allows the operator to regulate how firm the sanding head needs to be to conform the head to what they are sanding. -- Motor: 3/4 HP -- (1) B-12 Brush Head, which allows the sanding irregular surfaces with out loss of shape. -- And matching Heavy Duty Cast Iron Stand.

SAND-RITE DUO-DLX Spindle Sander; Horizontal spindle sander with 3/4 HP BALDOR motor. -- Optional brush heads sand irregular surfaces with out loss of shape, and the optional pneumatic drum heads (available in 2" to 8" diameters) allow the operator to regulate how firm the sanding head needs to be to conform the head to what they are sanding. -- Price does not include the stand - Add $500.00 Cast iron stand."Drums, brush heads, and sleeves are additional".Brush Head: ADD $ 252.00 2" X 8" pneumatic drum: ADD $ 200.008" X 9" pneumatic drum: ADD $ 370.00 Special note: 220 grit is the finest grit supplied for Brush Head