Sanders For Sale

Hemple 10 Spindke Sander lots of sand paper rolls mincluded

HOLYTEK MHB 242 Top/Bottom Wide Belt SanderHeavy-duty and powerful double surface sander providing significant time saving and improved productivity.Smooth and quiet oscillation. Belts oscillation controlled electronically by an infrared system which resists dust.Pneumatic sanding belts tensioning ensuring fast and easy belt replacement.Independent motor for each sanding belt.Pneumatic disc brake system automatically activated if power supply is interrupted, thus preserving the sanding belts from being damaged. Top and bottom 24" wide belt sanderFeatures: -- Spiral grooved 8" (D) rollers (R) and 3-1/2" (D) rollers (K) keep the sanding belts cool. -- Sanding belts: 75" Long. -- Elevation of table with digital readout and activated by independent motor. -- Control panel with: Ammeters indicating main motors current. Specifications: -- Upper Drum motor: 15 HP; 600 V; 60 Hz - 3-Ph. -- Upper Combination head motor: 10 HP; 600 V; 60 Hz - 3-Ph. -- Lower Drum motor: 15 HP; 600 V; 60 Hz - 3-Ph. -- Lower Combination head motor: 10 HP, 600 V, 60 Hz - 3-Ph. -- Feeding motors: 2 HP (x2). -- Table elevation motor: 0.5 HP. -- Electrical intensity: 53 A. -- Drums: 8" (D) - 75 DUROS. -- Max. working width: 24". -- Min. working length: 13-3/4". -- Working thickness: 3/16" ~ 5" -- Sanding belts dimensions: 25" x 75". -- Variable feeding speed: 8 - 16 MPM. -- Dust hoods Top: 4 x 4"(D); Bottom: 3 x 4"(D). -- OAL 127" x 70" x 75" high. -- Weight: 9,460 Lbs.

Holytek 37DA Wide Belt Sander (2) Heads37" Width cap Drum, Combination Head1st Head: 7" Dia. spiral grooved rubber covered contact roller, 20 HP motor;2nd Head: Combination sanding head with 5" dia. spiral grooved rubber covered contact roll & 2" wide polishing platen, 15 HP motor.Specifications -- Abrasive belt size of 37" x 60" -- Pneumatic belt tensioning and electronic abrasive belt tracking -- 12" min. working length. -- 2 HP Conveyor belt motor, -- Variable feed speed from 13 - 52 FPM,Equipped with & Features -- Infeed & outfeed rubber covered holddown rolls; -- 0" - 4" motorized thickness adjustment by 0.5 HP motor. -- Safety stop bar, emergency rail stop across the front of conveyor -- Motor load meters.

Homag SWT 100 series includes the following features: Height Adjustment System – 100 Series Conveyor bed is adjusted by four (4) large diameter dual supported threaded spindles • Calibration sanding • Veneer sanding • Fine sanding of solid wood • One machine for multiple sanding jobs • Easy to use and quick setup times • Automatic Star Delta starting • Maintenance-free electrical main motor braking • Electronic abrasive belt oscillation with photo eyes • Pneumatic tensioning of abrasive belt • Safety switch-off of machine during faulty operation • Rubberized pressure rollers • Workpiece thickness: 3 mm to 160 mm (1/8" to 6") • Working width: 1100 mm (43") • Abrasive belt width: 1120 mm (44") • Abrasive belt length: 1900 mm (75") • Abrasive belt changing side: left Conveyor Drive System Variable frequency-controlled feed speeds of 2.5 – 13 m/min. (18 – 42 ft/min.) with automatic conveyor belt tracking and rubber drive roller Touch Screen Display and Control ECO Mode Automatic machine stop with advance warning function for energy saving during idle time of the machine. Head 1: R Head - Steel Profiled Contact Roller Sanding Unit This sanding head features a 140mm (5.5”) diameter profiled steel contact roller with automatic positioning of the contact roller upon selection with integrated grit compensation. The steel contact roller is ideal for calibration, providing optimal calibration sanding results: Features & Details: HOMAG SANDTEQ W-124 RC (continued) • 15.6" graphically supported color touch screen • LCD-TFT color screen with 800 x 600 resolution • Metric or decimal inch input (3 decimal places) • 125 program memory • Automatic machine control • One-button start (Star Delta) • Sequential motor starting • Plain text error messaging at the operator terminal • Program backup via USB stick possible • Controls air or segmented pad options (only on models such feature) • Manual head locking for fast abrasive belt changing • Automatic Star Delta starting • Maintenance-free electrical motor braking (no wearable parts) • Grit compensation and automatic positioning for calibration • Poly-V drive belt for maximum power and minimal vibration • Non-contact photo eyes for abrasive belt oscillation • Contact Roller (Steel): 140 mm (5.5”) • Drive motor: 17.4 kW (23 hp) • Belt speed: 18 mps (59 fps) • Dust outlet size: 160 mm (6.5") Head 2: C-Head – Combination Head Sanding Unit This sanding head features a combination sanding head with an automatic positioning contact roller with grit compensation as well as a segmented sanding pad for finish sanding. The profiled rubber roller is ideal for light calibration or finish sanding while the segmented pad provides performance versatility depending on the application: EPS Electro-Pneumatic Segmented Pad System (Head 2) This head is equipped with an electro-pneumatic controlled segmented pad. This feature is designed for precision sanding, with 35 mm pad resolu

HOMAG SWT 225 RL Wide Belt Sander, (2) Heads53" Width cap. Drum, Combination Head; This Sander is Designed to Sand Solid Wood or Veneered WorkpiecesHead Configuration:1st Head: First Head Steel Profiled Roller Sanding Unit 6" Dia.; 25 HP Motor2nd Head: . Combination head with a grooved rubber-covered drum & air bladder platen. 20HP motorSpecifications: -- Working Width 53"; -- Working Thickness 1/8" to 8". -- Belt Speed 65 FPS 1st head and 6.5 - 59 FPS 2nd head. -- Air Jet Belt Blower on Head 2. -- Cleaning Brush for Cleaning Parts on Exit of Machine, Motor 1.2 HP; Horsehair Type Brush 5" in Diameter. -- 8″ Touchscreen -- Abrasive Belt Width 54" and Belt Length 85". -- Feed motor 1.5 -- Feed Speed: Variable (inverter driven) -- (1,329 Hours)Features: -- Automatic Thickness Setting Device --Constant Pass Line 36". -- Variable Frequency Controlled Feed Speeds 10-49 Ft./min.(1,329 Hours)

HOUFEK 1100-RC Wide Belt Sander, (2) Head, 43" capacity: 2-Head 43" width capacity Wide Belt Sander with Drum & Combination Head.Head Configuration: -- 1st Head: 6" Dia. rubber covered contact roll with 25 HP Motor. -- 2nd Head: Combination Head, rubber covered contact roll 6" dia. with 20 HP Motor. The HOUFEK Twin Head Wide Belt Sander is intended for users who require high quality value and maximum performance. Ideal for calibration and sanding of solid wood, calibration of boards (MDF, hardboards, joint boards) and also sanding of veneered surfaces.Standard Features: Motorised rise and fall of table, complete with Automatic start switch. -- Oscillation of abrasive sanding belt controlled by infra-red eye. -- Digital display indicator for table opening position.Additional Features: -- Automatic measuring of material height. -- Dual-speed feeding of material. -- Sound proof protection. -- CE electrical and safety standards.Specifications: -- Max. operating width 1.100 mm (43") -- Operating height max./min. 160 mm - 3 mm (0.12" - 6.3") -- Sanding belt dimensions 1,120 mm x 1,900 mm (44" X 75") -- Sanding belt speed 18 m/Sec (3,550 FPM) -- Feed speed 4,5 or 9 m/Min (15 or 30 FPM) -- Main motor power (2 x 11 kW) -- Feed motor power 5.5 kW.

HOUFEK BULDOG 1100-RC Wide Belt Sander, (2) Head 2-Head, 43" width capacity Wide Belt Sander with Drum & Combination Head.Head Configuration:1st Head: 6" Dia. rubber-covered contact roll with 20 HP Motor.2nd Head: Combination Head, rubber covered contact roll 6" dia. with 15 HP Motor. The HOUFEK Twin Head Wide Belt Sander is intended for users who require high-quality value and maximum performance. Ideal for calibration and sanding of solid wood, calibration of boards (MDF, hardboards, joint boards) and also sanding of veneered surfaces.Specifications: -- Max. operating width 1.100 mm (43") -- Operating height max./min. 160 mm - 3 mm (0.12" - 6.3") -- Sanding belt dimensions 1,120 mm x 1,900 mm (44" X 75") -- Sanding belt speed 18 m/Sec (3,550 FPM) -- Feed speed 4,5 or 9 m/Min (15 or 30 FPM) -- Main motor power (2 x 11 kW) -- Feed motor power 5.5 kWEquipped with & Features: -- Motorised rise and fall of table, complete with Automatic start switch. -- Oscillation of abrasive sanding belt controlled by infra-red eye. -- Digital display indicator for table opening position. -- Automatic measuring of material height. -- Dual-speed feeding of material. -- Soundproof protection. -- CE electrical and safety standards.Note from the seller: Only selling to make room for a 3-head 53" machine. In operation using daily. Available last week of July, first week of August.

53” capacity (1) drum head (1) combo head 230 volt 3 phase at lease (10) spare belts Available late July/early August 2023

INDIANA Model 12 Edge SanderDouble Sided, Non-oscillating Edge Sander with 48" x10" platens. -- 3 HP 220/440 Volt, 3 Phase Motor -- 56" X 10-3/4" Tilting Side Tables, 27" X 18"end Table, and Hand Wheel adjustment for table height. -- 9" belt capacity.This Heavy-Duty Sander has been Cleaned and Checked, and is available for immediate delivery!

Ironwood S135 MRK Wide Belt Sander Manufacturer specs: 52” Triple head wide belt sander. Head # 1 is a steel contact roller - 250 mm diameter profiled steel contact roller - Height adjustable contact roller with dial indicator for grit compensation - Thirty (30) horse power motor - Poly-v belt drive - Cutting speed of 20 mps (65 fps) - Cutting direction against feed Head #2 is a rubber contact roller - 250 mm diameter 85 shore profiled rubber contact roller - Height adjustable contact roller with dial indicator for grit compensation - Twenty (20) horse power motor - Poly-v belt drive - Cutting speed of 20 mps (65 fps) - Cutting direction against feed Head #3 is a combination head - 140 mm diameter 65 shore profiled rubber contact roller - Height adjustable contact roller with dial indicator for grit compensation - Height adjustable sanding pad - Twenty (20) horse power motor - Poly-v belt drive - Air jet belt cleaning - Cutting speed of 12 mps (40 fps) - Cutting direction against feed

Oscillating Edge Sander: 1 1/2 HP, 6" x 89" Belt Size (In.), 4,000 SFPM Belt SFPM, CordedFor edge, face, bevel, and contour applications. Oscillating feature reduces heat build-up. Quick-release lever and control dial help track and replace belts. Cast-iron table moves up or down.Specifications: 1-1/2 HP, Hz60, Amps AC18/9, Belt Size 6" x 89", Belt SFPM 4,000, Table Work Surface 32" x 7", Dust Collection Port Size 4" Features: -- 4 in Dust Port Hooks Up to Your Dust Collection System for Efficient Dust Removal, adjustable outer drum, support table enables contour sanding. -- Cast Iron table moves up or down to provide exact work piece positioning, Graphite covered Platen runs cooler increasing machine and belt life. -- Oscillating feature reduces heat build up on sanding belt, Quick Release Lever and Tracking Control Dial are conveniently located for replacing and tracking belts, Tilting Sanding Head for sanding bevels.

JET EHVS-80 6” x 89" Non-Oscillating Horizontal/Vertical Edge SanderSpecifications: -- Table size 12-1/2” x 37” x 3/4” Thick, Table tilt 0° - 90°. -- Platen size 7" x 34". -- Belt speed 3,900 SFPM.Equipped with: -- 6" x 89" Abrasive belt. -- 1-1/2 HP 3,600 RPM Direct drive motor.Palletized Dimensions: 50" x 31" x 44" H.

JET EHVS-80 EDGE SANDER (NON-OSCILLATING)(Single-Phase) ---Price Negotiable---Make an Offer!--- - 6” x 89" Non-Oscillating Horizontal/Vertical Edge Sander - Table size 12-1/2” x 37” x 3/4” Thick, Table tilt 0° - 90° - Platen size 7" x 34" - Belt speed 3,900 SFPM - 6" x 89" Abrasive belt - 1-1/2 HP 3,600 RPM Direct drive motor - Palletized Dimensions: 50" x 31" x 44" H

This Kimwood Panel Master Sander is in good working/running condition and it is ready to load! - 48" Feed - Feed speeds up to 200 lineal feet per minute - (2) opposing heads - 250HP - (2) operator control panels - Many spare parts including sanding belts

KIMWOOD Smithway 6-head top and bottom Sander5 Ft. wide sander with 62-inch maximum panel width capacity. -- 1st top and bottom heads opposed contact drums with 13.5" diameter steel drums driven by 150 HP direct drives. -- 2nd top and bottom heads are offset opposed contact drums with 13.5" diameter steel drums driven by 125 HP direct drives. -- 3rd top and bottom heads are offset opposed combination contact roll and smoothing platen heads driven by 100 HP direct drives and "billy roll" backup. -- Final cleaning brushes top and bottom with 1 HP belt drive. -- Panel flow is left to right, with constant pass line height of 50 inches. -- Exhaust: 60,000 CFM at 8" static pressure. --Weight with motors: 78,000 lbs. Length: 288 inches.

KRAMER K2024-1U -- K20 Series system is a heavy-duty barrel tumbler with standard capacity of 4.80 cubic feet. -- K20 system is a deburring machine solution that features a timer, variable speed, a heavy chain drive, and removable, interchangeable barrels. -- This deburring turn-key machine can configured to handle (1) to multiple barrels at a time. The barrels are mounted in a cradle and can be interchanged to divide up the load. -- Includes (1) Unlined barrel -- Variable speed control 25 - 50 RPM; 24-Hour timer; Start-stop switch. -- Complete unit dimensions are 58" W x 32" D x 50" H.

The K14 Series system is a small, heavy-duty, bench-top, barrel tumbler with standard capacities ranging from 0.75 - 1.5 cubic feet. -- The K14 system is a deburring machine solution that features a timer, variable speed, a heavy chain drive, and removable, interchangeable barrels. -- The barrels are mounted high enought to allow a screen and pan underneath so the barrel can be emptied without lifting and dumping. -- This deburring turn-key machine can handle loads of up to 200 Lbs. The barrels are mounted in a cradle and can be interchanged to divide up the load. -- (1) Steel barrel lined with a durable Polyurethane lining; 14" diameter across corners by 22-1/2" wide; Quick action lock on covers, solid, watertight doors. -- Variable speed control 25 - 50 RPM; 24-Hour timer; Start-stop switch. -- Complete bench-top unit dimensions are 44-1/2" W x 25" D x 24" H.

Single belt oscillating "Tiltable Bed" 0° - 90° sander, 3 HP main motor, 3,400 RPM, belt size 6" x 89", 30.5" long platen. -- Max sanding length 30.5", 4" vertical adjustment of front table, 36" table height, oscillating rate of 121 times/min. -- Includes: (4) interchangable spindles, sizes are 1.25" - 1.5" - 2" & 2.5" dia.

Oscillating Edge Sander with end sanding kit. -- 6" Wide x 89" long abrasive belt. -- Tilting 6" x 24" platen. -- 3 HP, single or 3-Phase motor w/emergency switch. -- 6" Diameter drive pulley. -- 8" x 24" Front table with a 4" vertical adjustment and miter gauge. -- End table for radius work. -- Heavy tables, fabricated steel base and dust hood. -- 3-Phase unit model # is SK-3000SDN3.

LAGUNA PRO 37 WIDE BELT SANDER1-Head, 36" width cap. - Combination sanding head with 4" dia. rubberized contact roll & 3" wide "dual action" polishing platen.Equipped with: -- Abrasive belt size 37" x 75" -- Pneumatic abrasive belt tensioning. -- Electronic abrasive belt tracking. -- 20 HP main drive motor. -- 1HP Variable feed speed motor for 12 - 60 FPM. -- 1/4 HP Conveyor bed elevation motor, with digital programmable thickness set up and AUTO-SIZE thickness system as well. -- Infeed & outfeed rubber covered holddown rolls. -- 0" - 5-1/2" thickness capacity.Complete with: -- Air-operated disc brakes on sanding head, emergency stop button