Woodworking Equipment For Sale

WESTERN PNEUMATICS - FJW2VS24: Heavy-Duty Production Finger Jointer Right & Left Shaper section: Cap.: 5/8" - 2" max. thickness; 1-1/2" - 8" max. width; 5" min. - 36" max. length.Equipped for right & left side -- (2) Scoring saws: 7-1/2 HP - 3,600 RPM motors. -- (2) Trim saws; 7-1/2 HP - 3,600 RPM motors. -- (2) Shaper motors: 20 HP - Direct drive 3,600 RPM motors. -- 6" Wide WESTERN feed chain; angle transfer conveyor; 15 HP variable speed drive with speeds up to (120) lugs per minute. -- Air Bag Pressure Head with: Quick-change feature; brush holddowns. -- APQUIP extrusion type glue applicator with: Meter mixing system. -- Transfer to the Assembly Press: Via powered manual Corner Transfer. -- 17' Extra length Assembly Infeed Conveyor with: Electronic ramp up/down infeed package; powered side alignment rolls; top & bottom preassembly rolls. -- Assembly Press: 16' Finished board length; hydraulic squeeze board press & board ejection with: Rapid stop-and-chop 7-1/2 HP Heavy-Duty cutoff saw; with automatic cycling. -- Feed speed varies automatically depending on block and cutoff lengths: 50 - 200 FPM.Pieces advance through the Cutoff Saw to a movable limit switch and cut to length; arranged for continuous assembly; the cut to length piece drops down into a final squeeze chamber, while the next piece is cut to length; finished lengths are pushed out hydraulically by the next piece onto material outfeed arms.Includes: -- Set of cutterheads and knives.NOTES: -- Machine for factory rebuilt in 2009. -- Machine easily runs (120) lugs per minute and 200 FPM at the Press. -- Equipment maintained to factory standards since new. -- Parts replacement (feed chain, sprocket, fences and more) in 2018 for a total of ...$ 28,500. -- Taken out of service: January 2025.Riggers: Required for loading.Some technical information needs to be confirmed by Seller.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i61 WHIRLWIND 1000 L Upcut Saw Specifications: 2-3/16" x 8-1/4" Cap., 14" blade cap., 3,450 RPM, left-hand unit feeding from right-to-left, 5 HP BALDOR motor. Complete with: (5 - 90) Cycles/Min; magnetic starter with low voltage controls, air filter, regulator, coalescing filter, and 4" dust chute. NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

Whirlwind Undercut Saw with Tiger Stop Fence

Specifications: -- 30" x 8" Cap., 20 HP - 3,600 RPM, 30/40/50/60 FPM, belted feed drive, Helical Carbide cutter-head, 14" min. stock length. Complete with: Sectional chip-breaker, corrugated infeed roll.

Williams 125 CJS1 Hammermill

Williams 125 HP Hammermill 230/460 3-phase

William & Hussey "W-7S" Moulding Shaper -- Specifications: 17-1/4"x 14" Table size, 2 HP main motor, 2-knife cutter head, 3,450 RPM spindle speed, 7" max. cutting height, 1/4" min. thickness 3/4" deep max cut.. Max moulding cap. 7" wide, max. planning cap. 7" wide. -- Complete with: Dust hood outlet, electrical disconnect, and mounted on fabricated steel stand w/casters, Multi-pass

Williams and Hussey 2007 W7-S model 206 planer/molder good condition Ser# 00452 Weight 250 ish Max thick 7”, Max width 7” Multi pass Baldor motor Powered infeed and out feed New std knives available at W/H for app 100/set Custom knives available from W/H

Manufacturer’s Soecification Feed Type:0-19 fpm, variable feed Motor:2 HP (3450 rpm) Voltage:240V Maximum Profile Depth ¾ inMinimum Stock Length 9 inMaximum Profile Width 6 ¾ inMinimum Stock Thickness ¼ in Maximum Height Above Final Cut 3/16 in Maximum Stock Thickness 8 in Planes 7 in WideOverall Machine Dimensions:28 inL x 22 inW x 50 inHWorking Height:35 in

Model 206 For smooth moulding and planing; (1) 2 HP Baldor motor, 7,000 RPM spindle speed, variable feed rate of 1 - 19 FPM includes "Deluxe" variable feed control with magnetic drop out switch and cords. Built in Multi-Pass system and Guide sytem -- Capacity: Max. material width 7", material thickness from 3/4" to 8" max., min. 9" stock length. Max. profile depth 3/4" and max. profile width 6-3/4", planes 7" wide and can do a 7" radius with optional jig; working height 31", overall height 45", overall width 20". -- Includes: Table guides, dust hood, belt, pulley, planing knives, welded steel stand, custom moulding catalog, oil, and operator's manual. -- With OPTIONAL accessories like the elliptical jig you can make arches and elliptical mouldings, please add...$ 700. Also available in 115/1/60 and 230/460V/3/60. Weight: Approx. 242 Lbs.

100 HP 230/460 volt 20” x 19” inlet 9” x 28” outlet no hopper

WILTON 4421-2 DISC SANDER ---Price Negotiable---Make an Offer!--- Heavy Duty for Wood, Metal, Fiberglass, or Plastic! - Pedestal-Type Disc Sander - Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces - 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch - Positive lock rack & gear table tilt

WILTON 4421-2 20" Pedestal-Type Disc SanderSpecifications: -- Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces.Equipped with: -- 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch. -- Positive lock rack & gear table tilt.

Wintersteiger DSG Sonic Frame Saw

MLS Number 10684323 Wisconsin Automated Machine C-450 Tennoner Single end tennoner Automatic double head coping tennoner Model C-450 Serial: C-450-6901-00 230 volts, 3 phase, 60 Hz. Allen-Bradley and Motortronics electrical Motors are 230 volts 48 full load amps. 15.2 amps on largest motor

WISE 5200 Twin Stair Trencher; 2" x 12" Max. stringer size, Semi-Automatic operation.Specifications: -- 5 HP Belted motor to "top & bottom" 10,000 RPM spindles, T & B heads are arranged to jump in & out to facilitate open plan stairs; -- Automatic pneumatic clamping of stringers, spring loaded side pressure to keep stringers against the fence. Features: -- Mirror-image routing on (1) pair of stringers at one time, graduated template automatically sets up to stated tread & rise, cuts standard wedge taper for both treads and risers.Includes: -- Heavy Duty TYLER Spindles, built-in jump dado function, clamp, and feed system.

WISE Model 1525 Hinge Jamb Machine; Designed for quick and accurate hinge patterns.Specifications: -- Jamb length up to 8', hinge size unlimited, radius 1/4" or 5/8", jamb width unlimited. -- Equipped with: durable accurate linear glide base, quick change out for variable parts. -- No templates are required, and additional stop bars are available.

32" Vertical grinder with 25 HP motor Dentom 624 9500 BTU Furnace automated measured feed controlled by furnace temperature Holding tank for feed from the grinder which is automatically fed to the furnace...that feed is temperature controlled.

Woods 502M hardwood flooring machine

Woods End Matchers with Hasko Beds. Call for pricing.