Woodworking Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 73
1454 Results Found
Sort By 
Recently Added Items
Stenner ST9
Call For Price
Stenner ST9
Pinheiro 630
Call For Price
Pinheiro 630
2005 D M C TOPSAND K TSK 135MS
$51,750
2005 D M C TOPSAND K TSK 135MS
Timesavers 2321-24-01
$21,890
Timesavers 2321-24-01
PREMIUM LISTINGS
2015 Guangzhou Hessan PUR Automatic Floor Laminating Line  Glue Equipment
$75,000

Guangzhou Hessan Woodworking Machinery Co., Ltd, HY-F-350 PUR Automatic Floor Laminating Line, 480 Volts 60Hz 3-Phase Lamination width: upto 350mm Thickness: 3-25mm Speed: 3-10m/min Dimensions: 6.8' High x 5' Wide x 72' Long Machine can laminate up to 17' long

 Hammond, IN
Brenco LLC
312-543-6505
Call

MZ Project Hopper 013  Bandsaw
$9,800

Cuts lengths up to 2,000 mm, max. size workpiece is 2,000 x 1,200 x 100 mm (78.7" x 47.2" x 4"); height of cut is from 0 - 100 mm (0" - 4") - Call for more details and similar equipment

 Jasper, IN
Machine Solutions, LLC
812-639-3527
Call

1985 Weinig U22A  Moulder
$7,500

1985 Weinig U22A Moulder, All Electrical, Just Taken out of Service, Was Working Daily, Delivery Available! $7,500 obo 585-335-5879/585-329-5875

 Dansville, NY
Dansville Logging & Lumber
585-335-5879
Call

Yates A20  Planer
$5,500

Yates A20 8” x 12” Planer, 6 head, motors needed and TLC needed for rebuild or used as parts machine, $5,500 – 719-843-0280

 Antonido, CO
Quality Timbers & Wood Products
719-843-0280
Call

Yates-American A20  Planer
$10,000

Yates A20 8” x 12” Planer, 5 head w/ top bracket, running condition, $10,000 - 719-843-0280

 Antonido, CO
Quality Timbers & Wood Products
719-843-0280
Call

STANDARD LISTINGS
2019 Cantek FJ-15B  Jointer and Finger Jointer
$73,800

CANTEK FJ-15B Manual Finger Joint System consisting of the following: -- ITEM 1: CANTEK F-C51 Finger Shaper (Left) Specs:Length: 115 - 1,000 mm (4.5” - 39”)Width: 20 - 450 mm (0.78” - 17.7”)Thickness: 20 - 160 mm (0.78” - 6.3”)With 7-1/2 HP motor for Cutting (Rotation 5,000 RPM)With 5 HP motor for Trimming Saw (Rotation 2,800 RPM)With Saw Blade, Without FJ Cutter (request sizes as desired)Dust Port Diameter: 1 x 150 mm (5.9”), 1 x 100 mm (3.9”)Machine weight: 1,452 Lbs (660 kG)Shipping weight: 1,584 Lbs (720 kG)Packing dimensions (LxWxH): 176 x 115 x 145 cm (7' x 4.5' x 5.7') -- ITEM 2: CANTEK F-C52 Finger Shaper (Right)Length: 115 - 1,000mm (4.5” - 39”)Width: 20 - 450mm (0.78” - 17.7”)Thickness: 20 - 160mm (0.78” - 6.3”)With 5Hp (3Ph) for Trimming SawWith 10Hp (3Ph) for Cutting Finger JointWith Saw Blade, Without FJ Cutter (request sizes as desired)Aspiration Bores Diameter - 1 x 150mm (5.9”), 1x100mm (3.9”)Easy Efficient hand Table FeedMachine weight: 1,452 lbs (660 kgs)Shipping weight: 1,584 lbs (720 kgs)Packing dimensions (LxWxH): 176 x 115 x 145 cm (7' x 4.5” x 5.7”) -- ITEM 3: CANTEK F-D05P1 Roll Conveyor TableLength: 1,000 mm (39.3”)Width: 450 mm (17.7”)Machine weight: 396 Lbs (180 kgs)Shipping weight: 506 Lbs (230 kgs)Packing dimensions (LxW): 203 x 97 cm (80" x 38") -- ITEM 4: CANTEK F-G01 Manual Gluing UnitWith 1/8 HP (3 Ph) Mag. StandardPacking with F-C51 -- ITEM 5: CANTEK F-A07-3M Single Step Auto Finger Joint Assembly PressLength (Max): 3,000 mm (118”) (other lengths available upon request)Width: 12 - 160 mm (0.47” - 6.3”)Thickness: 12 - 60 mm (0.47” - 2.3”)With 2 HP (3 Ph) for Feed MotorWith 5 HP (3 Ph) for Sizing SawWith 3 HP (3 Ph) for Oil PumpWith Saw BladeMachine weight: 3,300 Lbs (1,500 kgs)Shipping weight: 4,400 Lbs (2,000 kgs)Packing dimensions (LxWxH): 550 x 100 x 145 cm

Jeff Terrill
800-374-5009 ext:349
Call

2019 Cantek FJ-17  Jointer and Finger Jointer
$118,800

CANTEK MODEL FJ-17 SEMI-AUTO FINGER JOINT SYSTEM INCLUDING THE FOLLOWING: -- Semi-Automatic Finger Joint Shapers; Right Side with Glue Applicator -- Incoming block capacities: -- 4.9” to 39.3” long -- 17.7” max. width -- 0.47” to 6.3” thick -- Powered by: -- 15 HP Shaper Spindles -- 5 HP Trim Saws -- Roller type glue applicator included on Right Side Shaper -- NOTE: Includes sawblades but without finger joint heads. Many head / knife configurations available on request -- Model F-D05 Transfer Roller Table Set (includes three units) Tables are 39.4” long x 17.7” wide -- Model F-A07-3 Assembly Press with Single Stage Automatic Infeed -- SPECIFICATIONS: -- Press capacities are: -- 10’ max. length capacity -- 0.78 to 6.6” wide -- 0.78” to 2.36 thick -- 2 HP Feed Motor -- 5 HP Cutoff Saw -- 3 HP Hydraulic Pump Motor -- Call Jeff Terrill for tooling options and delivery possibilities

Jeff Terrill
800-374-5009 ext:349
Call

2015 Cantek FL-08  Jointer and Finger Jointer
$58,800

CANTEK FL-08 Automatic Vertical Finger Joint LineWith the Following: MODEL "F-I29-T2" Automatic Infeed Table; -- Table Size is 35” long x 23” wide and equipped with 1/2 HP motors. "F-C07" Auto Finger Joint Shaper, Left and Right Sides:Incoming Block Capacity: -- Block Lengths from 5.9” to 35.4” -- Block Widths with Vertical Jointing from 0.78” to 2.36”. -- Block Width with Horizontal Joint up to 6” (wider possible – optional). -- Thickness, Vertical Jointing from 0.78” to 6.3”. -- Thickness Horizontal Jointing from 0.78” to 2.36”.Specifications: -- 20 HP Motor for Shaper Spindle. -- 5 HP Motor for Trim Saw. -- 2 HP Motor for Bottom Scoring Saw. -- 1/2 HP for Feed Conveyor with Variable Speed Frequency Drive. -- Cycle Speed of max. 3~4 Cycles/Min. -- Note: Right side Shaper equipped with roller type glue applicator. "F-D16" Transfer Roller (From RH Shaper to Assembly Machine) -- Table Size: 23.6" wide x 35.4” long."F-A05-6" Two-Staqe Auto Finger Assembler -- Output Length: Up To 236” - 19.68’. -- Width from 0.78” to 6.3”. -- Thickness from 0.78” to 2.36”. -- 2 HP Drive for Feed Table. -- 5 HP Motor for Cut Off Saw. -- 5 HP Motor Hydraulic Pump. -- Speed of approx. (4) to (5) Finished boards/Min. All Electrics are to UL/CSA Standards with Wye Delta – Includes Soft Starter.Includes: Extra belts, blocks, cutter heads and some knives. Note: This system performs best when incoming blocks are run thru a 4-Sided Planer or Moulder.Production Example running 2" x 6" Blocks: -- 1-1/2" x 5-1/2" Blocks, 23.6" table = (15) blocks per cycle. -- (3) Table cycles per minute x 15 Blocks = (45) blocks per minute. -- (4) Table cycles per minute x 15 Blocks = (60) blocks per minute. Average Block Length of 24" = 90 to 120 LINEAL FPMNOTE: SYSTEM NEEDS A GOOD "TUNE-UP" INCLUDING A FEW ELECTRICAL AND PNEUMATIC PARTSEXPECT TO SPEND $10,000 TO $15,000 BEFORE YOU'RE DONETHIS POINT IS REFLECTED IN OUR WILLINGNESS TO TAKE AN OFFER

Jeff Terrill
800-374-5009 ext:349
Call

2019 Cantek FL-09  Jointer and Finger Jointer
$143,800

CANTEK FL-09 Auto Finger Joint Line includes the following: -- Model F-I23-L2 AUTO INFEED TABLE. Table Size: 2000mm (78.7”) long x 650mm (25.6”) wide; 1 HP Infeed Table -- Model F-C05 L1.5 AUTO FINGER SHAPER – LEFT HAND: Table Size: 650mm (25.6”) accepts 150~1500mm (5.9” ~ 59.05”) board length; 20~60mm (0.78” ~ 2.36”) Vertical finger joint width; 20-200mm Thickness for Vertical Joint (allows up to200mm height of material on Shaper Table -- Shaper Specifications: 20HP for Main Cutterhead Spindle; 10HP for Trimming Saw; 2HP for Bottom Scoring Saw; 1/2HP for Feeding Conveyor; with Saw Blade, without Shaper Cutter; Shaping Speed – Max. 3~4 Cycle/Min. -- Model F-C06 RP-L1 AUTO FINGER SHAPER WITH GLUE APPLICATOR – RIGHT HAND: Table Size: 650mm (25.6”) accepts 150~1500mm (5.9” ~ 59.05”) board length; 20~60mm (0.78” ~ 2.36”) Vertical finger joint width; 20-200mm Thickness for Vertical Joint (allows up to200mm height of material on Shaper Table -- Shaper Specifications: 20HP (3Ph) for Main Spindle; 5HP (3Ph) for Trimming Saw; Top and Bottom Scoring Saw, 2HP (3Ph) x 2; 1/2HP (3Ph) for Feeding Conveyor; Gluing System – Roller Type System; with Saw Blade, Without Cutter; Includes Glue Applicator; Shaping Speed – Max. 3~4 Cycle/Min. -- Model F-D08-L2.0 Transfer Roller System; Table Size: 2000mm (78.7”) long x 650mm (25.6”) wide -- Model F-A05-4.5 TWO-STAGE AUTO FINGER ASSEMBLER WITH AUTOMATIC CUTOFF SAW: Table Size: 7200mm (284”-23.6.ft.) long x 20~200mm (0.78” ~ 7.88”) width x 20~60mm (0.78” ~ 2.36”) thick. -- Specifications: 2HP (3Ph) for Feeding Table; 5HP (3Ph) for Sizing Saw; 5HP (3Ph) for Oil Pump. Includes Saw Blade; Speed – Max. 4~5 Piece/Min. -- NOTE: For best performance, incoming bocks should run through a 4-side Moulder before using this finger jointing line.

Jeff Terrill
800-374-5009 ext:349
Call

1984 Capital 969 MD  Veneer Equipment
$16,430

88" Cap., straight knife cut for end-grain clipping, double rod mechanical clutch dual-arm cam driven by 5 HP motor, foot pedal actuation of cycle. -- Max. (90) cycles/Min, motor mounted inside frame and V-belted to flywheel.

Tony Cornacchione
800-374-5009 ext:432
Call

1969 Capital 125"  Veneer Equipment
$138,500

CAPITAL Half-Round Slicer with a 125 inch length capacity and the following additional features: -- 50 HP Drive. -- Removed from service and Checked. -- Includes loading onto Buyer's truck.

Bill Christoffersen
800-374-5009 ext:365
Call

1972 Capital 150"  Veneer Equipment
$193,500

CAPITAL Half-Round Slicer with a 150 inch length capacity and the following additional features: -- 50 HP Drive. -- Includes CAPITAL Knife Grinder at no additional charge. -- Fully Reconditioned to "like new"! -- This machine was reconditioned at the factory yielding a slicer value of around $300,000. Somebody went out of business and you get a real bargain price!

Bill Christoffersen
800-374-5009 ext:365
Call

Capital 165"  Veneer Equipment
$149,500

CAPITAL Slicer with a 165 inch length capacity and the following additional features: -- 50 HP Main Drive. -- Still in-place connected to power for test operation but cannot be seen running a log. -- Includes loading onto Buyer's truck.

Bill Christoffersen
800-374-5009 ext:365
Call

Capital 213"  Veneer Equipment
$149,500

CAPITAL Slicer with a 213 inch length capacity and the following additional features: -- 50 HP Main Drive. -- Still in-place connected to power for test operation but cannot be seen running a log. -- Includes loading onto Buyer's truck.

Bill Christoffersen
800-374-5009 ext:365
Call

Capital VDB-100  Veneer Equipment
Call for Price

CAPITAL 125" Veneer Clipper. --125" Cap., straight knife cut for end grain clipping; 3 HP motor. -- Two-hand safety controls; Max. (90) cycles/Min. -- Complete with safety guards. -- Completely reconditioned; with new knife and shear plate.

Tony Cornacchione
800-374-5009 ext:432
Call

Capital VBD-36  Veneer Equipment
Call for Price

CAPITAL 36" Veneer Clipper. --36" Length of cut capacity, double-rod mechanical clutch driven by 3 HP motor, foot pedal actuation of cycle. -- Speed: About 90 cycles per minute max., shear cut angle with scissor-like angle mounted knife, motor mounted inside frame & V-belted to flywheel. --Includes: Re-sharpened knife, standard integral infeed support table and double rod guards.

Tony Cornacchione
800-374-5009 ext:432
Call

1967 Cargate D-860  Veneer Equipment
Call for Price

CARGATE D-860 Rotary Veneer Lathe, Heavy Duty: -- Built specifically to handle large diameter logs as well as small logs. It has a log length capacity of an easy 8'-6" and a diameter capacity of up to 5', peeling down to perfect 4" cores for optimal log utilization. -- This moneymaker looks like a big brother to a Premier Lathe. It comes complete with beefy Bull Gears and boasts plenty of output capacity along with the following main features and components:Specifications: -- BRUNETTE MACHINE WORKS Hydraulic Retractable Spindles - 4" inner, 8" and 11" outer. These are the same spindles as are utilized on a Premier Lathe. -- The spindles are driven by angle-cut 72" diameter Oil-Bath Bull Gears. (This is actually identical to an upgrade to Premier lathes still running.) -- Factory Hydraulic Backup Roll. (This backup roll rides on adjustable rollers riding down on top of the carriage. This prevents backup roll from pushing excessively hard against the core. It produces perfect 4" cores).Equipped with: -- DURAND Charger and Pumps (self centering). -- Factory Log Deck - Complete with S-drive and Gearbox. -- Factory Air Trash Gate, Infeed Conveyor (infeed to chipper). Infeed to PRENTICE Air Bag Clipper, Timing Wheel and Holddowns. -- Factory 5' Wheel, 6-knife, Veneer Chipper with Hold-down Drum Roller, and S-drive complete. -- 6' FERANO Chip Screen and Conveyor. -- 10' COE Knife Grinder. -- Steel Framework and 450 FPM plus uniwind speed!Highlights & Background: -- This lathe is capable of peeling very high production. In 1967 it was actually regularly peeling 225,000 sq. ft. 3/8 basis, or 400 - 500 cubic meters per 8-hour shift. The lathe is in wonderful overall condition and portions can be turned on today although it has not seen service since 2005. When you think "CARGATE" think "big PREMIER" and you will have the right idea.Price shown is in US Dollars. - Experienced Owner is flexible to assist in removal and perhaps installation.

Bill Christoffersen
800-374-5009 ext:365
Call

1995 Casadei F 114  Shaper
$3,350

CASADEI F-114 Shaper with 5 HP Spindle motor. -- 1-1/4" dia. spindle, 7" spindle length, 8-1/2" vertical travel, manual raise/lower of spindle, numerical readout display for spindle setting. -- (4) speeds at 2,900 - 4,400 - 6,000 & 8,000 RPM, electro-magnetic spindle brake. -- 43" x 28" table size, adjustable fence (360ø rotatable) with (3) micro-metric fine adjustments. -- Complete with: Overload protection and electric spindle lock.

Torry Hiddema
800-374-5009 ext:371
Call

1994 Casadei F 114  Shaper
$3,950

CASADEI F-114 Shaper with 5 HP Spindle motor and Power Feeder. -- 1-1/4" dia. spindle, 7" spindle length, 8-1/2" vertical travel, manual raise/lower of spindle, numerical readout display for spindle setting. -- (4) speeds at 2,900 - 4,400 - 6,000 & 8,000 RPM, electro-magnetic spindle brake. -- 43" x 28" table size, adjustable fence (360ø rotatable) with (3) micro-metric fine adjustments. -- Complete with: Overload protection, electric spindle lock, and Power Feeder

Torry Hiddema
800-374-5009 ext:371
Call

Casadei F 114  Shaper
$4,950

CASADEI F-114 Shaper with 8 HP Spindle motor and MAGGI Power Feeder. -- 1-1/4" dia. spindle, 7" spindle length, 8-1/2" vertical travel, manual raise/lower of spindle. -- (4) speeds at 2,900 - 4,400 - 6,000 & 8,000 RPM, electro-magnetic spindle brake. -- 43" x 28" table size, adjustable fence with micro-metric fine adjustments. -- Complete with: Overload protection, electric spindle lock, and MAGGI 4-Roll Power Feeder.

Torry Hiddema
800-374-5009 ext:371
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved