Panel Saws For Sale

SELCO WNT 7/730 REAR LOAD, AUTOMATIC PANEL SAW -- Specifications: 177" (4,500 mm) Overall cutting length, 5" (127 mm) max. saw blade projection, 29 HP (22 KW) main & 3.5 HP (2.6 KW) scoring motor. -- Saw Carriage:Variable saw carriage speed from 0 - 606 FPM (0 - 185 MPM), return speed 600 FPM (185 MPM); Rack & pinion drive, driven by AC brushless Servo motors. -- Pusher Fence:Electronically controlled overhead program fence with (8) pneumatic gripper clamps (open up to 5" / 128 mm).Forward speed of 295 FPM (90 MPM) & return speed of 295 FPM (90 MPM); rack & pinion drive, driven by AC brushless Servo motors. -- Operator & Machine Control:PC front end with Selco "OSI" + WINDOWS "7" operating system with easy programming of very complex cutting patterns.15" Flat screen monitor displays REAL-TIME graphics of cutting dimensions & patterns, program cutting list, manual cuts, diagnostic & on-line help.Data input by industrial keyboard & mouse, floppy disk or CD; direct downloading from office PC is possible.OSI (Open Selco Interface) guarantees fully automatic management of cutting patterns by optimizing all machine movements (pressure beam, saw carriage and side aligner pusher positioning, etc.).The numerical control adjusts the optimum saw blade projection for the stack of panels being cut and sets the most appropriate cutting speed, in relation to the stack itself and, when necessary, to the width of trim cut too. -- Rear Load Lift Table:Automatic lift table 173" x 87" (4,400 x 2,200 mm), 12,000 Lbs (5,455 KG) lift capacity.4 HP (2.3 kW) Motor for raise-and-lower, encoder-controlled guide rods for automatic book height adjustment; 28.7" (730 mm) max book height w/o a pit or risers. -- Rear of machine:(3) Lateral aligners to accurately position book of panels on rear table prior to cutting.Rear modular roller support rails with 80 mm dia rollers; rear of machine enclosed for safety. -- Front of machine:Automatic side/crosscut aligning device located inside the pressure beam aligns the panels against the right angle fence prior to cross-cutting, 2.4" - 87" (60 - 2,200 mm) stroke.90" (2,300 mm) Long crosscut fence (front-to-back); (4) Front mounted air flotation tables with rounded fronts 26" x 81" (650 x 2,050 mm). -- Complete with: "Quick Change" saw blade system; "DIGISET" electronic scoring adjustment; Selco "Quick-Opti" optimizing software; CP link. -- Options Include:173" x 87" (4,400 x 2,200 mm), LH facing, rear in-feed/out-feed conveyors with fork cut-outs that allow for staging/loading/unloading from the Rear LH side of the machine. Thin material loading capability. -- Actual Model is SELCO WNT 7/730/4500.

Model SF-45A 600 V / 3 Ph / 60 Hz 10ft table 8.5 HP main motor provides(2) cutting speeds 3,800 & 5,200 RPM

The seller has confirmed that this is in fair working/running condition and it is ready to load! - Cross cut panel saw

STRIEBIG STANDARD II TRK Vertical Panel SawSpecifications: -- 5' x 16' cap., 2-3/8" cutting depth, 7.5 HP motor with automatic STAR-DELTA starter & electric brake (stops within 4 Sec); 250 mm dia. (9-7/8") blade with 30 mm bore - 5,400 RPM rotation. -- Equipped with: -- Auto-deflecting aluminum lath grid, auxiliary support channel for tall & narrow parts, repeat rip gauge with 5-11/12' cap., unique lower roller panel support system (1,200 Lbs cap.). -- Complete with: -- 4" Dust extraction connection (requires auxiliary collection); patented "TRK" dust extraction system; (2) each adjustable base & rear supports for free-standing installation.

STRIEBIG - COMPACT: Vertical Panel Saw (15' Cut Cap.)Specifications -- 4 HP Motor with: Automatic STAR-DELTA starter electric brake (stops within 4 Sec). -- 181" Rip cap.; 64" crosscut; 2-3/8" (60 mm) cutting depth; 250 mm Dia. (9-7/8") blade with: 30 mm Bore - 5,400 RPM rotation. Equipped with: -- Full length center measuring rail with mid-level flip-out small parts support shelf; special long-wing crosscut measuring stop; crosscut lock-in stations in 40" increments. -- Automatic mechanically shifting support grid with: Replaceable lath tips for rip-cuts. -- Specially designed measuring flip stop for use with small parts; (6) template bar stops for setting common rip cuts; split center shelf useful for staging material; auto-engaging splitting wedge (riving knife)Complete with: -- Heavy-Duty panel support roller system (1,200 Lbs cap.) with: Integral panel stop brake. -- Dust extraction system to rear of frame (requires a bag or dust collector); 4" dust extraction connection. Includes: -- (3) Adjustable base & rear supports for free-standing installation of the one-piece fully welded frame. -- Dismantling and loading onto flatbed truck.Actual model: STRIEBIG Compact 5207.

Raimann Flexirip 6200 Saw System is still under power until the end of January 2025

Panel Rip Saw available in 60" and 72" width capacity - Main Motor: 40 HP (460 V) - Infeed Motor: 3 HP - Main Spindle: 74 mm - Main Spindle Speed: 2500 RPM - Blade Diameter: 205 mm - Moveable blades with locking collars - Maximum Width: 60" or 70" - (12) Rubber Hold Down Rollers - Quick Change Blade Holders - Thickness Capacity: 0-30 mm - Variable Feed Speed: 0-15 meters/minute - Anti-Kickback Safeguard Options: - Semi Automatic Hydraulic Infeed & Outfeed Tables (3000 kg) - Automatic Infeed System (including lift table)