Northfield For Sale

Model 206 For smooth moulding and planing; (1) 2 HP Baldor motor, 7,000 RPM spindle speed, variable feed rate of 1 - 19 FPM includes "Deluxe" variable feed control with magnetic drop out switch and cords. Built in Multi-Pass system and Guide sytem -- Capacity: Max. material width 7", material thickness from 3/4" to 8" max., min. 9" stock length. Max. profile depth 3/4" and max. profile width 6-3/4", planes 7" wide and can do a 7" radius with optional jig; working height 31", overall height 45", overall width 20". -- Includes: Table guides, dust hood, belt, pulley, planing knives, welded steel stand, custom moulding catalog, oil, and operator's manual. -- With OPTIONAL accessories like the elliptical jig you can make arches and elliptical mouldings, please add...$ 700. Also available in 115/1/60 and 230/460V/3/60. Weight: Approx. 242 Lbs.

Manufacturer’s Soecification Feed Type:0-19 fpm, variable feed Motor:2 HP (3450 rpm) Voltage:240V Maximum Profile Depth ¾ inMinimum Stock Length 9 inMaximum Profile Width 6 ¾ inMinimum Stock Thickness ¼ in Maximum Height Above Final Cut 3/16 in Maximum Stock Thickness 8 in Planes 7 in WideOverall Machine Dimensions:28 inL x 22 inW x 50 inHWorking Height:35 in

100 HP 230/460 volt 20” x 19” inlet 9” x 28” outlet no hopper

WILTON 4421-2 20" Pedestal-Type Disc SanderSpecifications: -- Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces.Equipped with: -- 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch. -- Positive lock rack & gear table tilt.

WILTON 4421-2 DISC SANDER ---Price Negotiable---Make an Offer!--- Heavy Duty for Wood, Metal, Fiberglass, or Plastic! - Pedestal-Type Disc Sander - Table size 10-1/2" x 27-1/2", Table tilt 45° Out/30° In, Table can be lowered below disc to accommodate large workpieces - 3 HP 1,720 RPM Direct drive motor, Low voltage protection switch - Positive lock rack & gear table tilt

Wintersteiger DSG Sonic Frame Saw

MLS Number 10684323 Wisconsin Automated Machine C-450 Tennoner Single end tennoner Automatic double head coping tennoner Model C-450 Serial: C-450-6901-00 230 volts, 3 phase, 60 Hz. Allen-Bradley and Motortronics electrical Motors are 230 volts 48 full load amps. 15.2 amps on largest motor

WISE 5200 Twin Stair Trencher; 2" x 12" Max. stringer size, Semi-Automatic operation.Specifications: -- 5 HP Belted motor to "top & bottom" 10,000 RPM spindles, T & B heads are arranged to jump in & out to facilitate open plan stairs; -- Automatic pneumatic clamping of stringers, spring loaded side pressure to keep stringers against the fence. Features: -- Mirror-image routing on (1) pair of stringers at one time, graduated template automatically sets up to stated tread & rise, cuts standard wedge taper for both treads and risers.Includes: -- Heavy Duty TYLER Spindles, built-in jump dado function, clamp, and feed system.

WISE Model 1525 Hinge Jamb Machine; Designed for quick and accurate hinge patterns.Specifications: -- Jamb length up to 8', hinge size unlimited, radius 1/4" or 5/8", jamb width unlimited. -- Equipped with: durable accurate linear glide base, quick change out for variable parts. -- No templates are required, and additional stop bars are available.

32" Vertical grinder with 25 HP motor Dentom 624 9500 BTU Furnace automated measured feed controlled by furnace temperature Holding tank for feed from the grinder which is automatically fed to the furnace...that feed is temperature controlled.

Woodmaster W725 Helical Head Planer 24” capacity 7.5 HP motor

Woods 502M hardwood flooring machine

Woodtech Wide Belt Sanders Fixed Passline Bed 1st Sanding Head Steel Drum- 30 HP 2nd Sanding Head Rubber Drum- 30 HP 3rd Sanding Head 320mm Rubber Drum- 20 HP 4th Sanding Head Electronic Magnetic Segmented Platen with Chevron Belt ABB electronics 480V 3phase Heavy duty heat treated frame Optional Heads- CrossBelt, Orbital, Polishing

Woodtech Planer Sander Touchscreen Operation Pneumatic Exclusion on the Planer head. Heavy Duty Planing head with anti kickback and pressure shoes - 30 HP 2 Sanding heads 1st sanding head Steel Drum - 30HP 2nd sanding head - Combi -head -rubber roll with Platen- 20 HP Dust Brush on the outfeed ABB electronics 480V 3phase Heavy duty heat treated frame

Woodtech Wide Belt Sanders Fixed Passline Bed 1st Sanding Head Steel Drum- 30 HP 2nd Sanding Head Rubber Drum- 30 HP 3rd Sanding Head 320mm Rubber Drum- 20 HP 4th Sanding Head Electronic Magnetic Segmented Platen with Chevron Belt ABB electronics 480V 3phase Heavy duty heat treated frame Optional Heads- CrossBelt, Orbital, Polishing

Woodtech Heavy Duty Moulder Models: WTM-330 – 12” wide – available in 4, 5 or 6 head configurations.WTM-260- 10” wide – available in 4, 5 or 6 head configurations. WTM-230 – 9” wide – available in 4, 5 or 6 head configurations.WTM-200 – 7” wide – available in 4, 5 or 6 head configurations. Electrical Requirements: Operating voltage: 460 Volt/60Hz/3 Phase Features Available: Outboard bearings on WTM-330 Pneumatic hold-downs, and side pressurePLC controlled – LCD readout Heavy duty drive motorsBelt driven spindlesAuto Lubrication Optional: Automatic Infeed Table 7000 RPM 1st Spindle - 15 HP 2nd Spindle - 15HP 3rd Spindle - 15HP 4thSpindle - 255HP 5th Spindle - 25HP 6th Spindle - 15HP 480V 3Phase Schneider Electronics

Woodtech 43" Sander Single Combination Head - Rubber roller with Platen ABB electronics 480V 3phase Heavy duty heat treated frame

Woodtech Heavy Duty Moulder Models: WTM-330 – 12” wide 6 head configurations. Electrical Requirements: Operating voltage: 460 Volt/60Hz/3 Phase Features Available: Outboard bearings Pneumatic hold-downs Side pressure PLC controlled LCD readout Heavy duty drive motorsBelt driven spindlesAuto Lubrication Optional: Automatic Infeed Table 7000 RPM 1st Spindle - 15 HP 2nd Spindle - 15HP 3rd Spindle - 15HP 4thSpindle - 255HP 5th Spindle - 25HP 6th Spindle - 15HP 480V 3Phase Schneider Electronics

1994 Woodtech Bandsaw Model 816420

Woodtech HD Horizontal Band SawMax. workpiece size: 300mmThickness of production board: 5–160mmWidth of conveyor belt: 375mmDiameter of saw wheel: 711mmFeeding speed: 0-15m/minHydraulic pressure: 50-60kg/cmSize of saw blade: 185” Length, 2” wide, 1.6mm thick Electrical Requirements: Voltage: 460V/60 HZ/3 phaseFull electrical load: 18.5 KWOverall dimension: 2800L x 2200W x 2000H