MACHINERY INSTALLATION CO., INC. (M.I.C.I.)
 336-269-2284

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 4
77 Results Found
Sort By 
MACHINERY-INSTALLATION-CO-INC-(MICI)
 336-269-2284
 Jocar 1250/180  Resaw-Band
$65,000

JOCAR 48" horizontal resaw with runaround system to include: 13' roller conveyor infeed with cant turners; 100 HP resaw to handle 18" x 18" cant complete with linear cylinder to move saw up and down, and with double wide, flat type, chain bed with hold down system; 20 HP hydraulic unit; 4' x 4' operator's cab with controls; 65' outfeed roll case with pusher fence separation system; 5' x 4 strand transfer for return cant; 40' return roller conveyor for cants; 12' infeed cant deck to infeed roller conveyor; electrical panel with AB controls (jog setworks); and legs with sub-steel.

 Burlington, NC
 336-269-2284

 Call
 Alco Machine 30  Debarker
$180,000

ALCO 30" ring debarker. 5 arm. Hydraulic feed system. Operator cab and controls. Never installed after factory reconditioning (have a list of all repairs). New-never installed 23' belt type infeed; 40' belt type outfeed. No belts included. Price $180,000. Exceptionally nice system.

 Burlington, NC
 336-269-2284

 Call
 Allen-Bradley 300  Electrical
$2,500

2 unused 300 HP auto-transformer coils 460 volt open style-no enclosure 2 coil design. Price is $2500 each.

 Burlington, NC
 336-269-2284

 Call
2005 Brewco B-1600  Resaw-Band
$105,000

Complete BREWCO B-1600 Resaw with run around system. Can be seen operating until November 2019. Will saw lengths 6' to 16' and up to 16" x 16" cant size. System has run everyday and is in good working condition.

 Burlington, NC
 336-269-2284

 Call
 Bruning-Federle 40 x 14  Blowers and Fans
$1,500

Bruning & Federle 40" material handling fan with common base for electric motor (motor not included). Base is approximately 64" x 60" x 22" tall. Fan has 6 blades mounted on 2 7/16" shaft and face is 12". Nice belt guard is included. Fan is in good condition with no holes. Inlet is 16" round and outlet is 16" x 14".

 Burlington, NC
 336-269-2284

 Call
 Cambio 30 INCH RING TYPE  Debarker
$165,000

Price includes: 30" debarker with two year old ring replacement, rebuilt hydraulic system-one year ago, operator's cab and controls, self-centering infeed, 20' outfeed. All in excellent condition. PRICE IS REMOVED AND LOADED ON YOUR TRUCK.

 Burlington, NC
 336-269-2284

 Call
 Carolina Blower   Blowers and Fans
$700

40"Carolina Fan. No electric motor. Inlet and outlet position shown in pictures. 15" round inlet with 4' bolted pipe and 16" outlet with transition. Fan blade is 1 1/2" wide by 28" long.

 Burlington, NC
 336-269-2284

 Call
 Cleereman Industries LP 42  Carriage (Sawmill)
$75,000

CLEEREMAN 42" linear positioning hydraulic carriage. 42" opening, 4 headblock, 8" tubular frame, 14" wheels, 20 HP hydraulic power unit, complete with track and SILVATECH setworks. $ 75,000 OBO. FOB MILL SITE.

 Burlington, NC
 336-269-2284

 Call
 CME 41A  Knife Grinder
$1,800

CM&E Knife Grinder for CM&E chipping head-rig using bent knives. Many knives are available with grinder.

 Burlington, NC
 336-269-2284

 Call
2018 Cooper Machine   Trimmer
Call for Price

Unused. Cooper drop saw trimmer to trim 6' to 12' lengths.

 Burlington, NC
 336-269-2284

 Call
2018 Cooper Machine   Conveyor
Call for Price

New-unused. 17' long; vulcanized 24" belt width; 5 HP drive; 7" deep sides; 42" to top of belt from ground; 26" inside width; lagged head pulley. Extremely nice.

 Burlington, NC
 336-269-2284

 Call
2018 Cooper Machine   Conveyor
Call for Price

NEW COOPER wide roller conveyor with jump chain transfer. 40' overall length (18'6" length and 21'6" length). 7.5 HP electric drive; Rolls have 60" wide face and mounted on 1 15/16" shafts and bearings; 18 total rolls. 18'6" end section includes: air operated stop gate; a 4 strand transfer with 81X chain and a 2HP electric drive and transfer measures 8'6" overall length.

 Burlington, NC
 336-269-2284

 Call
 Corley   Edgers-Gang
$190,000

Complete Mill to include: MELLOT debarker; HMC carriage, AC40, 3 headblock; 60 HP DC carriage feed; CORLEY 8" x 60" split combination gang edger; MORBARK 58" chip pack with 150 HP motor; trimmer and unscrambler; live roller conveyor with transfer; sorting and collecting chains; air compressor; log decks; waste system for sawdust; knife grinder; all electric motors and starters. Installed and must be removed. $190,000.

 Burlington, NC
 336-269-2284

 Call
 Corley   Trimmer
$15,000

CORLEY drop saw trimmer. Right Hand. Will trim from 6' to 20'. 10 HP motors on each saw. Includes block belt and guards. $15,000.

 Burlington, NC
 336-269-2284

 Call
 Corley 8 X 48  Edgers-Gang
Call for Price

CORLEY 8" X 48" Gang only. Weather worn but in very good condition. 200 HP main motor and 3 HP feed drive. Coleman teeth are in excellent condition. Rolls are NOT split. Ran very little. NO infeed or outfeed.

 Burlington, NC
 336-269-2284

 Call
 Crosby   Trimmer
$9,000

Two (2) saw timber trimmer. NO setworks.  As is where is $9,000.00.

 Burlington, NC
 336-269-2284

 Call
 Custom   Log Merchandising System
Call for Price

Includes operator's cab with controls, cutoff saw, 75' main log conveyor, 18' log conveyor with kicker system, 10' log conveyor with clamp which shifts, catwalk and ladders, C132 chain, and sub-steel.

 Burlington, NC
 336-269-2284

 Call
2002 Custom LOG CUT UP SYSTEM  Log Merchandising System
Call for Price

LOG CUT UP SYSTEM WITH SORTING: Includes infeed, 7 strand log deck; log conveyor to 72" cut off saw; log stops; 12 bays of sorting pockets by HUOT of Canada.

 Burlington, NC
 336-269-2284

 Call
 Cutler-Hammer   Electrical
$9,600

Electrical panel with 2000 amp Cutler-Hammer main breaker with ground-fault. Panel also includes (1) 1200 amp and (3) 400 amp fused disconnects. Panel is approximately 9' wide x 8' height x 24" depth. Offered electrical OK. $9600 OBO

 Burlington, NC
 336-269-2284

 Call
1996 Edmiston   Carriage (Sawmill)
$48,000

4 head block EDMISTON carriage. Complete system operated less than a year. Includes: 4 strand X 25' long log deck; stop and loader; husk with off bearing belt; saw arbor with driven sheave and 125 HP motor; hydraulic, chain type log turner; 50 HP hydraulic power unit with tank; operator's cab with controls; track frame is in 3 pieces and includes end bumpers. In excellent condition $48,000 OBO.

 Burlington, NC
 336-269-2284

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved