Woodworking Equipment For Sale

Northtech 12" Resaw Model NT-HBR12V Self contained hydraulic pack

Multiple Rip Saw with One Fixed and One Moveable Blade Two 10 HP Saw Motors, One for Each Blade Width of Fence Movement from Fixed Blade: 0" - 9.45" Moveable Saw Blade Traverse (From Fixed Blade): .78" - 8.35" Minimum Working Length: 12" Maximum Cutting Thickness: 2.56" Maximum Width of Cut from Fence: 17.71" Saw Blade Diameter: 12" Arbor Diameter: 1" Arbor Speed: 4,500 RPM Aluminum Chain w/ Rubber Slat Inserts Width of Feed Chain: 11-3/4" Feed Motor: 2 HP Variable Speed Feed from 39 - 98 FPM Three Rows of Upper Anti-Kickback Fingers Width Setting Drive Motor: 2 HP

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i5z NORTHTECH NT-EV-920RC DUAL HEAD WIDE BELT SANDER 2-Head wide belt sanding machine with 37" capacity. - Heads: 1st head: 8-1/4" Dia. grooved rubber contact roll, with 20 HP motor. 2nd head: Combination finishing platen with grooved rubber roller and polishing pad, with 15 HP motor. Two (2) infeed and outfeed spring loaded hold-down rollers; 2 HP variable speed feed drive. Sanding belt size: 37" X 85" and with electronic belt tracking. Motorized opening between the conveyor and sanding bed. Ammeters for measuring motor loads.

Northtech NT SLR-16SC Precision 16″ Straight Line Rip Saw FEED SYSTEM --Saw motor: 15HP, 3PH 230/460V -- Feed: 1.5HP variable from 40′ – 120′ FPMPRODUCT DIMENSIONS -- Min. thickness: 3/16″ -- Max depth of cut: 4-1/16″ with 16"; Blade -- Max depth of cut: 3-1/16"; with 14"; BladeSpecifications: -- Direct Drive = Direct Drive -- Feed Hp. = 1.5 Hp. -- Feed System = 4"; Split Chain with True Trac -- Feed Speed = 40-120 FPM -- Assisted Start = Wye Delt"; -- Throat Capacity = 18-1/4"; -- Min. Length = 12"; 2nd Roller to Kickback -- Min. Thickness = 3/16″ -- Max. Thickness = 4-1/16"; W/ 16"; BladeGlue Line Rip = Guaranteed 12′ 4/4 stock @ 50 FPMEquipped with & Features -- Blade Size = 14"; Tungsten Carbide Tipped -- Dust Collection = 1417 Total CFM -- Dust Port Out = 4"; Top 6"; Bottom -- Arbor Diameter = 2″ Arbor -- Idle Rollers = (8) Idle Rollers -- Hold Down Style = 8 Spring Loaded Hold Downs -- Kickback Finger = (59) Lower (32) Top -- Automatic Mechanical Oiler -- Low Oil Warning = Low Oil Shut-off -- Laser = 100mw Laser Light & Mount Bracket

2007 Northtech NT-CS14R-53 3 phase 460 volts 5 horsepower SN 07113 Operates good

NORTHTECH NT-EV-920RC Dual Head Wide Belt Sander2-Head Wide Belt Sanding Machine with 37" capacity. Specifications: -- First head 8-1/4" Dia. grooved rubber contact roll, with 20 HP motor. -- Second head: Combination finishing platen with grooved rubber roller and polishing pad, with 15 HP motor. -- Two (2) infeed and outfeed spring loaded holddown rollers; 2 HP variable speed feed drive. -- Sanding belt size: 37" X 85" and with electronic belt tracking. -- Motorized opening between conveyor bed and sanding heads. -- Ammeters for measuring motor loads. -- Includes spare abrasive belts.

NORTHTECH NT-KL-43-RC Wide Belt Sander (2) Heads;43" width cap. Drum, Combination Head.Head Configuration:1st Head: Rubber-covered contact drum with 25 HP motor2nd Head: Combination head with a rubber-covered contact drum and 2-1/4" wide finishing platen, 20 HP motor.Specifications: -- Thickness opening with PLC control, (DP-525 controller) keypad entry automatically adjusts to any thickness with LED readout. -- 37" x 75" Abrasive belts, TRU-TRAK solid state abrasive belt tracking. -- Variable feed drive 13 - 49 FPM, 2 HP motor. -- Endless belt conveyor, infeed and outfeed rubber covered pinch rolls. -- Complete with: 0" - 6" Automatic part thickness set up.Equipped with & Features: -- Infeed and outfeed rubber covered spring loaded holddown rolls. -- Feed emergency stops at infeed. -- Disc brakes on sanding heads, electrical interlocks on main access doors, and motor load meters. -- Note: Year of manufacturing has to be verified.

NORTHTECH - NT-920C-200: 2-Head Planer Sander Specifications -- 2-Head. 37" width cap.; 1-knife planer head followed by a wide belt sander head. -- 0" - 6" Motorized opening with: PLC control; keypad entry; LED readout for part thickness. -- 1st Head. 6" Dia. helical planer head with: (6) Rows of staggered carbide inserts; each insert has (4) usable sides; 30 HP motor. -- 2nd Head. Combination sanding head with: 4-5/8" Dia. rubber covered contact roll; 2-1/2" wide finishing platen; 20 HP motor. -- 37" x 75" Abrasive sanding belt; solid-state belt tracking. -- 3 HP Variable feed drive from 15 - 50 FPM; endless belt conveyor with automatic tracking.Complete with: -- Infeed over thickness bar. -- Emergency stops at infeed & outfeed. -- Air-operated disc brakes on sanding heads. -- Electrical interlocks on main access doors. -- Electrical controls with overload protection. -- Motor load meters. -- Panel cleaning brush.

Manufacturer’s Specification - 15HP Motor + 1HP feed motor (with Wye Delta soft start) - Mechanical variable speed (45' – 100' FPM) provides a speed range for all material types and thickness ranges of 3/16”- 3-1/2”. - Bottom & top kickback fingers - Rack and pinion fence for precise and quick positioning. - Digital electronic oiler provides maximum chain and race life. - 15-1/2? distance from column to blade. - 8' glue line tolerance.

NORTHTECH NT 25 RS-HA Finger JointerFinger jointer with (2) shaper and press capacity of 6" wide X 20' long pressSpecifications: -- Northtech Finger Jointer System w/ Model NT-25LS-HA Left Shaper, NT-25 RS-HA Right Shaper, Glue System, and NT-20AH-HA Pressing Station -- Left Hand Shaper Unit includes 20 HP Shaper, 7.5 HP Saw Motor, 1 HP Bottom Scoring Motor, and a Pusher Cylinder to Send Parts Away -- Right Hand Shaper Includes 20 HP Shaper, 7.5 HP Saw Motor, and Top & Bottom Scoring Motors and Glue Application Head -- Shapers have 29" x 28" Tables -- 50mm Diameter Shaper Spindles -- Maximum Length X Height of Workpiece 40" x 6" -- Minimum Length X Height of Workpiece 6" X 0.8" -- Model NT-20-AH-HA Finger Joint Press -- Pressing Length: 20' -- Cut-Off Saw to Cut Pieces to Length. Saw Motor: 3 HP -- Hydraulic Press Feed with 7.5HP Motor -- Pneumatic Top & End Pressure -- All Units Include Push-Button ControlsNote: Purchase used in 2022 after been cleaned and checked, now replace with larger system

NORTHTECH NT-610 HC TOP AND BOTTOM PLANER: --24" x 8" cap., min. material length 12". Table size is 111" x 24". -- 50 HP top and 40 HP bottom belt driven motors; --Minimum working length is 12" and minimum working thickness is 1/4". -- Variable feed speed 55 - 155 FPM powered by a 5 HP feed motor; 1 HP motor for table raise & lower and (4) ball screws. -- Both cutter heads are helical carbide insert knife heads, 6,000 RPM. MACHINE FEATURES: -- Rugged cast iron and plate steel fabrication. -- Overhead feed cnveyor with 1,100 individual spring loaded "feed fingers" to provide excellent feed characteristics. -- Computerized top cutterhead positioner is accurate to +/-0.001" -- Cutterhead tooling technology gurantees low noise, reduced power requirements, minimal operations cost and repetitive finish on the most difficutl hardwoods. -- Patented lifting column system (synchronized transmission) gurantees repetitive setup and long-term dependability. -- DP-525 Thickness Setting Unit --Patented universal drive transmission for feed groups and infeed carpet allows a maintenance free design verses chain drives. -- Cutterheads are solid steel construction, dynamically balanced and mated with precision pulleys. -- Cutterheads are supported by "NSK" class 7 precision ball bearings and prcision housings. -- Chromed beds, Guards and skirts for operator safety. -- Additional Specs: Machine dimensions: L2830 x W185 x H1700 MM; Weight: 9,000 lbs; Dust Collection: 3600 CFM

NORTHTECH NT-610HC TOP AND BOTTOM PLANER: --24" x 8" cap., min. material length 12". Table size is 111" x 24". -- 50 HP top and 40 HP bottom belt driven motors; --Minimum working length is 12" and minimum working thickness is 1/4". -- Variable feed speed 55 - 155 FPM powered by a 5 HP feed motor; 1 HP motor for table raise & lower and (4) ball screws. -- Both cutter heads are helical carbide insert knife heads, 6,000 RPM. MACHINE FEATURES: -- Rugged cast iron and plate steel fabrication. -- Overhead feed conveyor with 1,100 individual spring loaded "feed fingers" to provide excellent feed characteristics. -- Computerized top cutterhead positioner is accurate to +/-0.001" -- Cutterhead tooling technology gurantees low noise, reduced power requirements, minimal operations cost and repetitive finish on the most difficult hardwoods. -- Patented lifting column system (synchronized transmission) gurantees repetitive setup and long-term dependability. -- DP-525 Thickness Setting Unit --Patented universal drive transmission for feed groups and infeed carpet allows a maintenance free design verses chain drives. -- Cutterheads are solid steel construction, dynamically balanced and mated with precision pulleys. -- Cutterheads are supported by "NSK" class 7 precision ball bearings and precision housings. -- Chromed beds, Guards and skirts for operator safety. -- Additional Specs: Machine dimensions: L2830 x W185 x H1700 MM; Weight: 9,000 lbs; Dust Collection: 3600 CFM

NORTHTECH - SRS-12 ...Straight Line RipsawSpecifications: --15 HP Motor, 1" dia. saw arbor, speed of 4,500 RPM, 8". -- Max. blade cap.: 12". -- Max. depth of cut: 3-5/16". -- Part length: 8" Min. -- Distance between saw & column: 18"; 60" W x 33" table. -- Feed & Chain: 2 HP Feed drive motor; variable feed speeds of: 59 - 72 - 91 - 111 & 137 FPM. --7" Wide double chain, with automatic chain lubrication.Equipped with & Feature: -- Top pressure system with (6) spring loaded holddown rollers. -- Double row antikickback fingers. -- Adjustable infeed fence. -- Safety side guard. -- 4" Dia. dust hood outlet. -- Push button controls. -- Magnetic starters. - Overhead post for laser mounting.

NORTHTECH Four (4) Head Lineal Brush SanderSpecifications: • Sanding Head configuration: 2 Top + 1 Opposing Right + 1 Opposing Left• Working width up to 12"• Working thickness range: 1/4" - 6"• Minimum working length: 30"• (2) Top 1.5 HP Sanding heads RPM are inverter controlled• (2) 1 HP Opposing side sanding heads RPM are inverter-controlled• 150/180 Grit setup included; other grits available upon request• (2) 1/4 HP feed motors with 25 - 105 feed speed range• (2) 5" top dust ports requiring 681 CFM @ point of extraction• (2) 4" Side dust ports requiring 436 CFM @ point of extraction• 230V or 460V 3PH 60HZ• Net / Gross weight: Approx. 1,056 Lbs / Approx. 1,300 Lbs• Approximate Machine dimensions (LxWxH): 59" x 52" x 67"• Tool box and Operation/Parts Manual included• Warranty is one-year parts

NOVY 1872V Multi Spindle Vertical Boring Machine 12 Spindles Vertical boring machineSpecifications: -- Table Hardwood 18" X 72' -- Table stroke 0"- 6" -- (12) Spindles in line at 5" center to center, spindle nose with 0" to 1/2" chuck -- (2) drive motor 2 HP with magnetic starter -- (4) Spring loaded hold down -- Savety guard -- Foot swtich

Oakley Edge Sander

OAKLEY H-5 Double Sided Edge Sander. -- General Specs: With 7.5 HP -1,800 RPM TEFC motor; (2) 8-1/2" x 57-1/2" Cast Iron platens; 8" x 164" abrasive belt, 4,680 FPM belt speed. -- Equipped with: One 11" x 62" Cast iron side table on one side and (1) 19" x 64" cast table on the other side, (1) cast iron radius tilting end table, end table tilts 0 ° - 45°; 6" vertical table travel w/hand wheel adjustment. -- Features: Rubber covered direct drive pulley and idler pulley,Complete with: Magnetic starter with overload protection, (8) dead head radius ends with graphite covering, and (1) steel covered spare head roll.

OGAM PO/M Straight Line Rip Saw;Specifications: -- 20 HP Main motor. -- 24"; throat capacity. -- Max. cutting height: with 12" blade 3", with 16" blade 4". -- Min. diameter of circular saw blades: 8". -- Max. dia. of circular saw blades: 16". -- Min. length of working pieces: 10". -- Variable feed speed from 50 -154 Ft./minute. -- Feeding belt width: 11". -- Spindle Speed: 4,500 RPM. -- 36"; x 60"; table.Equipped with & Features: -- Fence and rail system with one stop. -- Infeed table row of anti-kick back fingers. -- Steel smooth top hold down roller. -- Top row of anti-kick back fingers. -- Steel smooth top hold down roller. -- Split hold down steel smooth roller around blade. -- Split hold down steel smooth roller around blade. -- Steel smooth top hold down roller. -- Chain is in excellent condition!

Ogden SL3660 RFS

Ogden PUR Laminating Line - Hopper Feeder - Glue Applicator - Drum Melter - Substrate Transfer - Roll Press - CRP14 - Manual Cut Off Saw