Machinery Scene
 360-864-2800

Machinery Scene is your source for used industrial machinery. We buy and sell quality, previously owned equipment. Every piece of machinery listed on our site is located at our Toledo, Washington facility. When you call us for equipment, you don’t have to worry about working with another company because we own all the equipment!

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 4
71 Results Found
Sort By 
Machinery-Scene
 360-864-2800
 Linden  Step Feeder 4-36-50  Conveyors Decks (Log Lumber)
Call for Price

Used Linden double acting step feeder(s), Linden 4-36-50 log step feeder, serial# 98-1151 and 1152, 4 steps, 36" stroke, 50 degree angle, 25 hp electric motor belt driven to SM Cyclo reducer drive, approximately 4ft elevation gain, each box is 24" wide and is referred to "narrow box version" and has maximum contact on logs, 22 boxes wide, log length capacity 50ft, factory prints/drawings can be view in photos, Step feeder can be used as 2 individual 25ft long feeders and is priced at per 25ft section- 2 total section available - both run independently and has a electric motor and gear reducer for each section, estimated weight of each 25ft section is approximately 50,000 LBS or 100,000LBS for the total 50ft section. All information is from Linden MFG and we have a copy of the original drawings available, Step feeders are stored in our yard and ready for prompt shipment. Price includes loading onto truck, we can also quote you a delivered price to your location. YouTube videos of step feeder before it was dismantled: https://youtu.be/r-4vExQlDQM , https://youtu.be/uQ4pI19p9t8 , https://youtu.be/HziXK2CtgsI , https://youtu.be/pk8iqnsIB78 , https://youtu.be/MidD6aN8Zmw

 Toledo, WA
 360-864-2800

 Call
 Acrowood 52-16-6  Wood Chipper - Stationary
Call for Price

Acrowood 5216 (52") slant disc chipper 125HP with key knife conversion, SERIAL # 5398-99, model 5216-6, includes spare parts (view photos). prior owner discontinued business, more photos available

 Toledo, WA
 360-864-2800

 Call
 Archer Blower Co 36 x 50   Airlock
Call for Price

used 50 inch feeder, 36" x 50" feeder, Archer 36" x 50" feeder airlock, used Archer 36 x 50 feeder airlock, Archer model# 36/50 , 1 inch thick knifes/blades, overall height 44 1/2", can provide video demonstration of gear box motor running, repainted blue, more photos available before and after paint,

 Toledo, WA
 360-864-2800

 Call
 BM and M 7 x 12 double ball deck  Chip Screen
$0

BM&M Screen 7 x 12 , model 7x12 DS, top screen holes are 1 7/8", for the 2 stainless woven wire fines screens with 3/16"+holes , ball decks and fines pans are stainless steel, 3 of the discharge chutes are stainless steel, the current photos show before, during and after paint, more photos to come, support stand and hangers will be attached to screen after paint job is finished.

 Toledo, WA
 360-864-2800

 Call
 BM and M 773-11 36 4  Chip Screen
Call for Price

BM&M support hangers assemblies, Unused BM&M 773-11/36/4 screen support hangers with bolts still in factory box, photos show both sets of 4 each- (8 hangers available) s/n H177B4146A BM & M U-joint hanger modern style, BM &M screen hanger assembly, BM and M support u joint shafts, unused bmm screen hangers, BMM basket support hangers, stored in our warehouse for prompt delivery. We also have a few used hangers 36 inches long (measured yoke face to yoke face) available, 8 unused and 4 used hangers available ( photos of used hangers available upon request). We have them in inventory for prompt delivery.

 Toledo, WA
 360-864-2800

 Call
 Burelbach 4 X 10 FT  Panel Stacker
$9,500

•Burelbach 4 x 10ft stacker •Removed from plywood mill that went out of business, was in use at time of shut down •Currently stored inside

 Toledo, WA
 360-864-2800

 Call
 Bush chip master 66,  8 knife  Wood Chipper - Stationary
Call for Price

66 inch Bush chipper , 8 knife Chip Master chipper, used 66” 8 knife Bush electric chipper, recent rebuilt disc, 66” stationary chipper 8 knife, Bush 66” 8 knife chipper model, recent disc rebuild and other repairs installed December 2014 and was removed 2016 from service. : disk rebuild- $16,000 +, Front and rear bearing assemble $3,000+, chipper hood $4,000+, disc rebuild and repairs done by Lindsay/Lindex located in Vancouver Washington State -view photos to see pictures of invoices, extra parts, ( “J”?) spout/throat, view photos for condition, motors available, more information and photos are available, Call for a delivered price.

 Toledo, WA
 360-864-2800

 Call
 Can-Am WD480XHD box chain  Conveyor
Call for Price

3 strand Can-Am box chain WD 480 XHD box chain, used 480 drag chain, used heavy duty drag chain 480 XHD chain for sale, 1000 feet of Can-Am 480 xhd box chain for sale, Can-Am sprockets and Heavy duty drag chain 480, harden pin, Can-Am drag chain sprockets, Chain number: WD-480XHD, Ultimate strength:122,000 lbs., Allowable working load: 24,400 lbs., Links per foot: 1.5, Average weight per foot 21 lbs., Approximate overall width 15 1/4 inches, Length of bearing 13 inches, Rivet diameter 1 inch, side bar thickness: 5/8 inch, Side bar height: 2 inches, Approximate tooth face at pitch line: 11 inches,. 1000 feet of used Can Am heavy duty 480 drag chain, Can-Am drive sprockets, tail sprockets/spools and shafts ( 6") and Dodge bearings SAF-XT 534 are available, Can-Am 3 strand drag chain sprockets, tail spools and shafts, additional photos and information available, We have the drive and tail sections triple strand 480 XHD box chain conveyors, Can am drag chain sprockets 3 strand 480 XHD box drag chain conveyors lined with plastic or UHMW, We have dismantled both of the 3 strand conveyors ( 70ft long+), and they are ready for prompt shipment. We are selling conveyor parts separately or together: chain, sprockets, shaft and bearings. Prior use was conveying wood chips, Call for more photos, questions or a delivered price.

 Toledo, WA
 360-864-2800

 Call
 Can-Am twin box chain   Conveyor
Call for Price

Twin box chain live bottom hopper, 2 strand box chain hopper conveyor, 32 ft hopper conveyor Surge bin inside hopper conveyor width 3 ft, 32ft long OD, 9ft 4 inch height OD, overall width 8ft 6inches, hydraulic drive-but we have electric gear boxes available

 Toledo, WA
 360-864-2800

 Call
 Caterpillar D8 winch  Attachment
Call for Price

Caterpillar D8 cat winch, Caterpillar D 8 winch, caterpillar cat winch Used Caterpillar D8 winch, More information to come, contact us for additional photos and information, currently stored inside our warehouse, we can quote you a delivered price,

 Toledo, WA
 360-864-2800

 Call
 Caterpillar 966G  Wheel Loader
Call for Price

Used log forks for Caterpillar 966G, Weldco Beales log forks, WBM log grapple forks, cat 966 G log forks, Used Log forks fit 966G Caterpillar wheel loader, log forks with grapple, Weldco Beales log forks center grapple, Weldco Beales Manufacturing log forks: assemble #: 148-401-124, Model#: GRPL: LOG, M26F, EWK, STD,. Serial# 1-60562-1, Machine: Caterpillar 966 G JCAT, approximate width 9 ft, Manufacturer drawing available, more photos and delivery available, grapple hydraulic cylinders test available,

 Toledo, WA
 360-864-2800

 Call
 Custom Built  70 ft log transfer H132 chain log    Conveyor
Call for Price

Log haul conveyor, h132 chain with flites, log trough conveyor, 70 ft long, bottom ID of trough is 13" wide and the to[ ID is 42" wide+-, most of the trough is lined with nylon/plastic view photos to verify, this conveyor is removed in one 70ft piece and ready to load from our facility, we can cut the conveyor into two pieces to reduce the shipping cost.(an additional 30ft of the same log conveyor is available). Price includes loading on to truck,

 Toledo, WA
 360-864-2800

 Call
 Custom Built 37 foot twin box chain  Conveyor
Call for Price

Dual strand box chain conveyor 37 ft long, incline dual box chain conveyor dual box chain conveyor 37 ft long, X 36 inches wide inside trough X 7 inches deep, incline twin box chain conveyor, the box chain has flites attached, S drive, the conveyor is lined with (nylon/plastic uhmw ?) on the bottom of conveyor and in the return pan with the bolt heads countered sunk, the return chain trough is lined with (nylon/plastic uhmw ?), prior used was conveying wood chips inside of a building, several gear motor options- currently conveyor has a 7 1/2HP SM Cyclo 59RPM gear motor, will be shipped in one piece it with chains still in place- overall length will be approximately 39ft long - shipping in one piece will reduce the cost of installation, we can cut it to length if buyer requests it, call for a delivered price to your location,

 Toledo, WA
 360-864-2800

 Call
 Dings  3 stage magnet  Magnetic Seperator
Call for Price

Dings cross belt 3 stage magnet, Dings self cleaning severe duty overhead cross belt 36” electromagnet, Dings overhead crossbelt self-cleaning electromagnet Dings suspension magnet belt width 36” - with belt armor clad 24”wide, Rexnard speed reducer: size 203D model 85 ratio 15:1, this magnet consist of 3 separate magnets with the right magnet adjustable left or right with a powered mechanical screw type mechanism, Rectifier available, approximate outside dimensions: length 14 ft 6 inches, width 6 ft 2 inches, approximate weight 12,000 lbs., suspension stand and turnbuckles available, Call for a delivered price Left Magnet Info: watts 5150, product # 33OH, part #101573, serial# 12512-01, volts 115 DC Center Magnet Info: watts 5035, product # 2 SPLOH, part #101278, serial# 12512-01, volts 115 DC Right Magnet Info: watts 4061, product # 22 OH, part #101075, serial# 12512-01, volts 115 DC

 Toledo, WA
 360-864-2800

 Call
 Durand 5 X 10FT  Panel Stacker
$14,500

•Durand plywood stacker •Will stack panels up to 5ft wide x 10ft long panels •Serial # 1286 •Was in use on skinner/trimmer line when the plywood mill went out of business •Currently stored inside, and ready to load on a truck •No charge for loading

 Toledo, WA
 360-864-2800

 Call
 Eriez MC-2 SE 7583 suspended electromagnet  Magnetic Seperator
Call for Price

Eriez suspended magnet, suspended electromagnet and controller, Eriez magnet info: MC-2 SE 7583, style 200809053, serial# 314389, Overhead separator magnets, Suspended overhead electromagnet, Permanent suspended conveyor magnet, Electromagnetic separator, belt magnet, this Eriez magnet is stored in our warehouse for same day shipping for prompt delivery, magnet dimensions 6ft W X 6ft L X 3ft +- thick, Eriez electrical control panel details: model N4-20K42, Style 201104804, Serial # 314389, 3 Phase, Volts in 480 VAC , Amperes in 50, - Volts Out 230 VDC, Amperes out 87, HZ 50/60, Can provide video of powering up Eriez electrical panel at independent electrical shop during testing, , currently stored inside our warehouse for prompt shipping, Call for a delivered price, approximate magnet weight 16,500 lbs. controller weight 2,000 lbs., magnet shipping dimensions (no pallet) : 72” wide x 91” Long X 50” tall, control shipping dimensions: 75” tall x 37” wide x 26” deep – , we also have an smaller Eriez magnet available.

 Toledo, WA
 360-864-2800

 Call
 Gruendler 24-3 WOOD HOG  Hogs and Wood Grinders
$9,500

Gruendler Wood Hog •Model 24-3 •Horizontal feed •Serial# 21444, •GE 75HP 220/440 volt 1775 RPM main motor, •Direct drive, 3/4HP infeed motor for feed wheel, •Bottom discharge is 10 inch diameter . •Hammers are 1 1/2 in width. •Rotor width is approx. 24 inches. • Infeed opening is 3 inches tall, infeed opening width 17 1/2 inches. •We can quote you a delivered price to your location. stored inside. motor test available

 Toledo, WA
 360-864-2800

 Call
 Hyster D6  winch  Attachment
Call for Price

Cat D6 winch, Hyster winch arch, Caterpillar D 6 winch, Young arch Hyster winch, D6 Hyster winch with 4 roll arch, Caterpillar D6 Hyster winch, Caterpillar D6 Young arch 4 rolls, Young 4 roll arch, winch # B82L1743, D6 Young arch Hyster winch, More information to come, contact us for additional photos and information, currently stored inside our warehouse, we can quote you a delivered price

 Toledo, WA
 360-864-2800

 Call
 Jacobson  42315XLT   Hogs and Wood Grinders
$21,500

•Jacobson / Carter Day XLT Full Circle Hammermill, •125HP •Reliance XE Energy Efficient Extra Tough direct drive motor •460 volts •1785 RPM •Model # 42315 XLT •Serial# 39960 •1/4 inch thick hammers •Inside width approx. 14 inches •Top Gravity feed • Left side and or right side discharge •Large side access rolling panels for easy rotor and hammer access •Motor starter •Prior use was grinding straw • Stored inside •Motor test available Have a starter that came with Hammermill, but don't know if if works or is the correct size. •Can quote you a delivered price to your location

 Toledo, WA
 360-864-2800

 Call

Call for Price

 Jenkins   Panel Saw
Call for Price

Jenkins 191SB slatbed 10ft saw, Kohler General Jenkins 6 head slat bed 10ft saw, 6 movable saw heads are attached to air cylinders to raise and lower each individual saw head independently also adjust left and right, 40HP common arbor, can cut up to 10ft + long panels, spare parts included, removed from service June 2017-stored inside our warehouse, Jenkins model# 191 SB, serial # 1159, variable speed infeed, dust collection hoses/manifold included (in photo), saw was removed from the original location in one piece for easy installation - and will ship in one piece (over sized-width load - we have photos of the saw loaded on the semi truck), approximate overall saw footprint: 12foot 9inches wide X 17foot long +-, call or email for a delivered price to your location, stored inside our warehouse, we can test run saw motor and provide video to buy, more details and photos available- please contact us with questions or more photos.

 Toledo, WA
 360-864-2800

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved