Machinery Scene
Machinery Scene
 360-864-2800

Machinery Scene is your source for used industrial machinery. We buy and sell quality, previously owned equipment. Every piece of machinery listed on our site is located at our Toledo, Washington facility. When you call us for equipment, you don’t have to worry about working with another company because we own all the equipment!

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 1
18 Results Found
Sort By 
Machinery-Scene
 360-864-2800
Precision Husky 66 inch  Wood Chipper - Stationary
Call for Price

Used Precision horizontal stationary chipper, 66”, 6 knife. Precision Husky stationary electric chipper Horizontal infeed Bottom discharge 6 knife Knife size: 21 ½” x 6” Choice of electric motors available Can provide a video of shaft/disk rotating with dial indicator on shaft. Chipper was cleaned & repainted, we do have photos before we painted it Additional photos, vidoes and information available. Contact us for a delivered price.

 Toledo, WA
 360-864-2800

 Call
Archer Blower Co 36 x 50  Airlock
Call for Price

used 50 inch feeder, 36" x 50" feeder, Archer 36" x 50" feeder airlock, used Archer 36 x 50 feeder airlock, Archer model# 36/50 , 1 inch thick knifes/blades, overall height 44 1/2", can provide video demonstration of gear box motor running, repainted blue, more photos available before and after paint,

 Toledo, WA
 360-864-2800

 Call
BM & M 773-11 36 4  Chip Screen
Call for Price

BM&M support hangers assemblies, Unused BM&M 773-11/36/4 screen support hangers with bolts still in factory box, photos show both sets of 4 each- (8 hangers available) s/n H177B4146A BM & M U-joint hanger modern style, BM &M screen hanger assembly, BM and M support u joint shafts, unused bmm screen hangers, BMM basket support hangers, stored in our warehouse for prompt delivery. We also have a few used hangers 36 inches long (measured yoke face to yoke face) available, 8 unused and 4 used hangers available ( photos of used hangers available upon request). We have them in inventory for prompt delivery.

 Toledo, WA
 360-864-2800

 Call
Cutler-Hammer 300 HP soft start  Electrical
Call for Price

•Culter Hammer Solid State Reduced voltage starters •Two available

 Toledo, WA
 360-864-2800

 Call
Dings 3 stage magnet  Magnetic Separator
Call for Price

Dings cross belt magnet, 3 stage magnet, Dings self-cleaning severe-duty overhead cross belt 36” electromagnet, Dings overhead crossbelt self-cleaning electromagnet Dings suspension magnet belt width 36” - with belt armor clad 24”wide, Rexnard speed reducer: size 203D model 85 ratio 15:1, this magnet consist of 3 separate magnets with the right magnet adjustable left or right with a powered mechanical screw type mechanism, Rectifier available, approximate outside dimensions: length 14 ft 6 inches, width 6 ft 2 inches, approximate weight 12,000 lbs., suspension stand and turnbuckles available, Call for a delivered price Left Magnet Info: watts 5150, product # 33OH, part #101573, serial# 12512-01, volts 115 DC Center Magnet Info: watts 5035, product # 2 SPLOH, part #101278, serial# 12512-01, volts 115 DC Right Magnet Info: watts 4061, product # 22 OH, part #101075, serial# 12512-01, volts 115 DC

 Toledo, WA
 360-864-2800

 Call
Dodge Industrial 100 RPM  Electrical
Call for Price

Reliance / Dodge gear reducer, 100 RPM output, 5HP Reliance motor: 230/460V, RPM 1700, SF:1.00, INS. CL:F, Reliance ID# B77Y9718P, Hz:60, Dodge# size:5-147P-DG4A-2-17.1-A1, Four are available, Video of them running available. several other types and sizes available

 Toledo, WA
 360-864-2800

 Call
Eriez SE- 580  Magnetic Separator
Call for Price

Eriez suspended magnet, Eriez SE- 580, rectifier, 9600lbs Magnet O.D. dimensions: 42” w X 70” long X 44” tall Rectifier 460 AC volts 115 DC volts output, Amps 64 Serial # A53753 Style: 711 Weight of magnet: 9,600 lbs. magnet came from a complete plant liquidation, more information available, Pallet/create will be built for shipping at NO cost call for a delivered price

 Toledo, WA
 360-864-2800

 Call
Eriez 54X60X30 se 580  Magnetic Separator
Call for Price

Eriez suspended magnet, Eriez SE- 580 & rectifier Magnet OD. dimensions: 54” w X 70” long X 44” tall Rectifier 460 AC volts 115 DC volts output, Amps 74 Serial # A53753 Weight of magnet: 11,600 lbs. magnet came from a complete plant liquidation, more information available, Pallet/create will be built for shipping at NO cost call for a delivered price

 Toledo, WA
 360-864-2800

 Call
Hoover 60 ft  Conveyor
Call for Price

24" x 60' Hoover Radial Stacking Conveyor with scales, catwalk & hand railing, 15hp motor running @ 400FPM, 100TPH, @60PCF Material. Scale Includes ThermoFisher Series 10-17-4 Belt Scale + 9101 Integrator. Only 260k tons lifetime use Used inside building since new. price includes loading freight rates available upon request

 Toledo, WA
 360-864-2800

 Call

Call for Price

Hoover  Conveyor
Call for Price

Feeder hopper with 85ft Superior belt conveyor, Mclanahan cross belt sampler 24" x 85' Transfer Superior Conveyor with 15hp Motor running at approx. 400FPM, 100TPH, @60PCF Material. Comes with McLanahan 24" cross Belt Sampler: LHD 18" Wide Enclosure 2-7/16" Dia Shaft, 6" Wide Cutter. 260k tons lifetime use and hopper conveyor. Sampler available separately.

 Toledo, WA
 360-864-2800

 Call
Kansas City Bag Co super sack  Mulch Bagger
$4

unused-new, bulk bags, super sacks, bulk totes, FIBC- flexible intermediate bulk container, New-unused-still packaged on original packaging pallets ( bags were manufactured in October 2011 - were stored in warehouse and still stored inside), 35"x 35"x 25" S/S, weight capacity: 2,200 LBS. SWL (1000KGS) safety factor 5:1, single trip FIBC, factory bag drawing is available in photos or upon request, we have approximately 31,000 bulk bags available, bags are packaged 130 bags per pallet- (MINIMUM ORDER IS ONE PALLET: 130 bags at $3.46 each = $449.80 per pallet and will be sold in pallet quantities) , the bag information tags are labeled with the original sellers name: K.C.B. Kansas City Bag Company, document pouch, top filling spout 14” diameter and 19” long, bottom discharge chute 14” diameter and 19” long- with tabbed gusseted liner , liner, reduced price for purchasing large quantities, bags are stored inside on their original pallets with the original covers strapped to the pallets, ocean container loading available - 5200+ bags fit in a 40 ft container, bags are at our location close to ports, Call for pricing and a freight quote or with any questions. Free samples are available upon request - shipped via UPS ground, used semi-automatic bag filling machines with weight check are available- can be used to fill these bags, nationwide deliver is available, call David @360.864.2800 with any questions or for additional photos or delivered prices to your location nationwide or overseas. Estimated freight cost to northern California is 25 cents per bag in truck load quantities, estimated freight cost to southern California is 35 cents per bag in truck load quantities,

 Toledo, WA
 360-864-2800

 Call
Krause Cleated belt  Conveyor
Call for Price

50ft+ long x 45" inside width "Z" belt conveyor, 10hp contact us for additional photos and pricing & freight rate, loading included, videos of belt operating are available.

 Toledo, WA
 360-864-2800

 Call
Lincoln 300HP open drip electric motor  Electrical
$3,200

used 300HP electric motor, tested ran at independent motor shop, have paper work and video, looks to be rewound from the wire leads

 Toledo, WA
 360-864-2800

 Call
Montgomery Industries ER 18S315FHDL  Hogs and Wood Grinders
Call for Price

Montgomery Blo-Hog, drop feed Steel Flywheel for surge loads Top infeed opening: 18 ¼ X 13 1/4” Bottom discharge Will be repainted Model: ER 18S315FHDL Serial # 1032 75 hp motor. 230/460V, frame: 405T, Support stand Extra parts Contact us for a delivered price

 Toledo, WA
 360-864-2800

 Call
Superior 33 inch paddle wheel  Blower and Fan
Call for Price

Superior Systems 75HP paddle wheel fan, material handling fan Fan wheel size: diameter 33”, width 9”, thickness 3/8”+, Inlet 19” diameter, Outlet 18” x 16”, Reliance motor: 75HP, 1780 RPM, 460 volt, frame 365T, encl.: TEFC, Fan has been repainted blue Test run of fan with demonstration available

 Toledo, WA
 360-864-2800

 Call
Unknown hollow shaftless screw auger  Conveyor-Auger
Call for Price

twin-screw 36" hollow screw auger conveyor, 6ft wide screw conveyor, dual 36 inch screw conveyor, double 36" x 27ft hollow screw conveyor, REPAINTED LIGHT ORANGE, Dual 36” shaftless hollow screw auger conveyor, conveyor is soon to be completely repainted - more photos to come, inside length 27 feet 6 inches, inside width 6 feet 2 inches, overall outside length of conveyor 30ft 10 inches, conveyor trough is 50 inches deep, overall outside with of conveyor trough 6ft 9 inches – overall outside width can be reduced to 8ft wide by unbolting both motors and chain guards during shipping, lube oil can be added inside chain guards so sprockets and chain can be lubed by the oil bath – site glass and plugs are attached to both chain guards, flighting spacing 24 inches, flighting thickness 1 inch, flighting width 7 inches, 2 Falk gearboxes with 25HP motors – both 25 HP motors & gearboxes have been removed from conveyor and have had the bearings replace in motors, and the Falk gearboxes have been serviced/oil changed by a independent motor repair shop and test ran with video footage by independent electric motor shop, currently both gearboxes and motor are stored inside our temperature-controlled warehouse, weight 25,000 lbs, overall outside width of conveyor with motors attached is 13ft 6inches, call for more details and a delivered price to your location, price includes loading

 Toledo, WA
 360-864-2800

 Call
Unknown ribbon screw feeder auger conveyor  Conveyor-Auger
Call for Price

Ross ribbon hollow screw feeder conveyor, 16”+ wide trough, 11ft 4 inches inside length, flighting spacing 5”, thickness 5/16”, flighting height 5 ¾”+-, see thru lid included, bottom discharge gates ( view photos for details) Ross model # 43C-14, serial # OR101115, motor specs. 7 1/2HP, 230/460 volt, Sew Eurodrive gear reducer output RPM 30, Can provide video of feeder running., stored inside our warehouse, Call for a delivered price.

 Toledo, WA
 360-864-2800

 Call
Unknown  Blower and Fan
$3,150

•Stainless steel fan (wheel and fan body) •Clean air type fan wheel (might be a backward curved?) •Inlet 25 1/2?, Outlet width 19? X 23 1/4? •wheel diameter 33? and width of wheel is 8? •no motor (used motor available) •Fan performance is only a guess- 5,000 to 26,000 CFM, 0 to 9 inches of static pressure •No tag is on the fan •Stored inside

 Toledo, WA
 360-864-2800

 Call
Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved