Jointers and Finger Jointers For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 2
25 Results Found
Sort By 
STANDARD LISTINGS
2021 Cam-Wood 620-UB  Jointer and Finger Jointer
$249,700

CAM-WOOD 620-UB "LONG BOARD" Medium Production Horizontal Finger Jointer: A typical application is for post and beam or laminated beam operations where long lengths are required. Up to 12' infeed capacity, unlimited outfeed lengths, and with the following equipment and specifications:CAM-WOOD HSTC-62AX2 Infeed Conveyor (A on Schematic) -- Infeed Table size: 24.4’ wide x 12’-4” long -- Working dimensions: 24.4” wide x 12’-1” long -- Feed speed: 115 FPM -- Powered by (2) 2 HP inverter type motors CAM-WOOD FSR-62I Inverter Type Section (B on Schematic) -- Working dimensions: 24.4” wide x 6” to 12’ long x 0.06” to 4” thick -- Shaper spindle with 20 HP motor -- Size of cutter head: 50 mm Bore x 160 mm OD (1-cutterhead included) -- Shaper spindle runs at 5,800 RPM -- 7-1/2 HP Cut-off saw, runs at 4,800 RPM -- Cut-off saw blade dimensions: 10” dia. x 100 tooth (1-blade included) -- 2 HP scoring saw, runs at 2,850 RPM -- Scoring saw blade dimensions: 7” Diameter x 60 tooth (1-blade included) -- Conveyer belt powered by a 2 HP motor -- Table movement powered by a 2 HP motor -- Table movement power, 2 HP motor -- Table cycle speed, 1 to 4 cycles per minute CAM-WOOD HSTC-62AX2 Outfeed Conveyor (C on Schematic) -- Table size: 24.4’ wide x 12’-4” long -- Working dimensions: 24.4” wide x 12’-1” long -- Feed speed: 115 FPM -- Powered by (2) 2 HP inverter type motorsCAM-WOOD HSTC-62AX2 Infeed Conveyor (N on Schematic) -- Table size: 24.4’ wide x 9’-8” long -- Working dimensions: 24.4” wide x 12’-1” long -- Feed speed: 115 FPM -- Powered by (2) 2 HP inverter type motorsCAM-WOOD FSL-62I Inverter Type Finger Joint Shaper (D on Schematic) -- Working dimensions: 24.4” wide x 6” to 12’ long x 0.06” to 4” thick -- Shaper spindle with 20 HP motor -- Size of cutter head: 50 mm Bore x 160 mm OD (1-cutterhead included) -- Shaper spindle runs at 5,800 RPM -- 7-1/2 HP Cut-off saw, runs at 4,800 RPM -- Cut-off saw blade dimensions: 10” diameter x 100 tooth (1-blade included) -- 2 HP scoring saw, runs at 2,850 RPM -- Scoring saw blade dimensions: 7” diameter x 60 tooth (1-blade included) -- Conveyer belt powered by a 2 HP -- Table movement powered by a 2 HP motor -- Table movement power, 2 HP motor -- Table cycle speed, 1 to 4 cycles per minuteNOTE: Glue application system provided by others such as APQUIP. Buyer to provide glue system of their choice and ship to CAM-WOOD's factory where it is mounted, aligned, and tested prior to shipment. This work is included in the price.CAM-WOOD HSTC-62BX2 Outfeed Converyor With Glue Cleaner (E on Schematic) -- Table size: 24.4” wide x 12.4” long -- Working dimension: 24.4” wide x 12.1” long -- Feed speed: 180 FPM -- Feed belt motor with 2 HP motor -- Glue cleaning device with 1/2 HP mot

Jeff Terrill
800-374-5009 ext:349
Call

2021 Cam-Wood HSTC-62A  Jointer and Finger Jointer
$341,700

CAM-WOOD HSTC-62 HIGH SPEED LONG BOARD VERTICAL FINGER JOINTER with the following Specifications: HSTC-62A Infeed Belt Conveyor: -- Working dimension: 24” wide x 16’ long -- Speed at 110 FPM -- One 3 HP Inverter Drive Motor SHAPER #1: DFSR-62I - Left Side Heavy Duty Finger Joint Shaper -- Working dimension: 24” wide x 1” to 10” high x 8” to 16' long -- Scoring Saw: 2 HP motor -- Scoring Saw Blade: 7” diameter x 50 tooth -- Scoring Saw speed: 2,850 RPM -- Trim Saw Spindle: 15 HP motor -- Trim Saw Blade: 12” diameter x 80 tooth -- Trim Saw Speed: 2,800 RPM -- (2) Finger Joint Spindles, (1) for rough cut and (1) for finish cut, each with a 30 HP motor -- Spindle diameter: 50 mm -- Diameter of cutterhead possible without knives: 8-1/4” -- Shaper Spindle speed: 3,800 RPM -- Conveyor belt with 3 HP Inverter Drive -- Table cycle by 3 HP Drive Motor -- Table cycle speed from (1) to (4) cycles per minute (depends on work)HSTC-62A HEAVY SINGLE TABLE OUTFEED TRANSFER CONVEYOR -- Working dimension: 24” wide X 16’ long -- Speed at 110 FPM -- One 3 HP Inverter DriveHSTC-62A SINGLE TABLE INFEED TRANSFER CONVEYOR -- Working dimension: 24” wide X 16' long -- Speed at 110 FPM -- One 3 HP Inverter DriveSHAPER #2: DFSR-62I - RIGHT SIDE HEAVY DUTY FINGER JOINT SHAPER WITH GLUE APPLICATOR -- Working dimension: 24” wide x 1” to 10” high x 8” to 16' long -- Scoring Saw: 2 HP motor -- Scoring Saw Blade: 7” diameter x 50 tooth -- Scoring Saw speed: 2,850 RPM -- Trim Saw Spindle: 15 HP motor -- Trim Saw Blade: 12” diameter x 80 tooth -- Trim Saw Speed: 2,800 RPM -- (2) Finger Joint Spindles, (1) for rough cut and (1) for finish cut, each with a 30 HP motor -- Spindle diameter: 50 mm -- Diameter of cutterhead possible without knives: 8-1/4” -- Shaper Spindle speed: 3,800 RPM -- Conveyor belt with 3 HP Inverter Drive -- Table cycle by 3 HP Drive Motor -- Injection type adhesive spreader with standard glue height of 10” -- Glue system included is for PVAC. -- Optional APQUIP Glue System available at extra cost -- Optional Glue Equipment available for Loctite HB X Glue at extra price -- Deduct ...$5,200 if provided without a Glue SystemHSTC-62B OUTFEED CONVEYOR WITH BELT CLEANER -- Working dimension 24” long X 16’ wide -- Speed at 115 FPM -- (1) 3 HP Inverter Drive -- (1) 1/2 HP motor for conveyor cleaning device HSCB-62 TIPPING CONVEYOR W/NARROW CONVEYOR -- Flips boards from vertical to horizontal for automatic feed to the Press -- Working dimensions: -- (1) Conveyor at 24” wide x 16’ long -- (1) Conveyor at 8” wide x 16’ long -- Speed 110 FPM -- 3 HP Inverter Drive UFJ-600 FINGER JOINT CONTINOUS ASSEMBLY MACHINE FOR INFINITE LENGTHS -- Working dimension 1-3/8” to 10’ wide X 1” to 4” thick by unlimited lengths -- In-feed speed from 100 to 165 FPM -- Cut-Off Saw: 7-1/2 HP -- Cut-Off Saw

Jeff Terrill
800-374-5009 ext:349
Call

2021 Cam-Wood IAT 620  Jointer and Finger Jointer
$145,000

CAM-WOOD TYPE IAT, MODEL 620 Vertical & Horizontal Finger Jointer - consisting of the following segments:DTC-62 Twin Infeed Conveyor: -- Operator fills the width of the 1st conveyor with blocks placed on edge. 1st Conveyor is controlled by the operator, feeding the 2nd buffer conveyor. Combined, the (2) conveyors facilitate keeping the system full and productive -- Each Conveyor is 24" wide x 40" long -- Powered with (2) 1/2 HP motors. -- Controlled by the system. -- Feeding at a constant rate of 180 FPM FSR-62I Right Hand Inverter Type Finger Joint Shaper: -- Feed table is 24" wide and accepts blocks from 6" to 40" long x 1/2" to 6" wide -- Shaper spindle is driven by a 20 HP motor -- Spindle diameter is 50 mm and runs at 6,600 RPM -- 6.3" Maximum shaper cutterhead diameter - without knives -- 10 HP - 4,800 RPM Cutoff and trim saw; accepts 10" dia. x 100 tooth x 5 mm blades -- 2 HP - 2,850 RPM Scoring saw, accepts 7" dia. x 50 tooth x 5 mm blades -- Conveyer powered by 1/2 HP motor -- Table movement is Inverter driven; powered by a 3 HP inverter motor with cycle speeds from 1 to 4 cycles per minute. Motor senses load and varies travel as neededSTC-62A Single Table Transfer Conveyor: -- 24" Wide x 40" long -- Powered with (2) 1/2 HP motors. -- Controlled by the system -- Feeding at a constant rate of 180 FPM FSL-62I Left Hand Inverter Type Finger Joint Shaper with Glue Extruder: -- Feed table is 24" wide and accepts blocks from 6" to 40" long x 1/2" to 6" wide -- Shaper spindle is driven by a 20 HP motor -- Spindle diameter is 50mm and runs at 6,600 RPM -- 6.3" Maximum shaper cutterhead diameter - without knives -- 10 HP - 4,800 RPM Cutoff and trim saw; accepts 10" dia. x 100 tooth x 5 mm blades -- 2 HP - 2,850 RPM Scoring saw, accepts 7" dia. x 50 tooth x 5 mm blades -- Conveyer powered by 1/2 HP motor -- Table movement is Inverter driven; powered by a 3 HP + 3HP inverter motor with cycle speeds from 1 to 4 cycles/Min. Motor senses load and varies travel as needed.Includes Injection type Glue Applicator: -- Extrudes adhesive into the fingers without messy runoff. -- 6" Comb height is standard -- Finger pitch 4 mm -- 10 - 12 mm finger length is standard equipment (special sizes made as options) STC-62A Single Table Conveyor: -- 24" Wide x 40" long -- Powered with (2) 1/2 HP motors -- Controlled by the system -- Feeding at a constant rate of 180 FPM FJ-500A (5) Meter (197") Assembly Press with Cut-Off Saw: -- Capacity is from 1" to 6" wide x 1/2" to 3" high x up to 16-1/2' long -- 2 HP motor powers the upper and lower pre-assembly rolls -- 5 HP infeed inverter drive -- In-feed speed from 30 to 230 FPM -- Speed is controlled by the system -- 5 HP - 2,850 RPM Cutoff saw accepts 14" dia. x 120 tooth x 4 mm kerf blades -- 5 HP Hydraulic power pack for final squeeze -- Capacity from 1 - 4 table lo

Jeff Terrill
800-374-5009 ext:349
Call

2021 Cam-Wood IAT 620  Jointer and Finger Jointer
$124,700

CAM-WOOD MODEL "IAT 620" INVERTER DRIVEN FINGER JOINT SYSTEM: Consisting of the following equipment: --DTC-62 Infeed with (1) Lay-Up and (3) Compartment Block-Staging Infeed Conveyors Feeding the 1st (Right Hand) Shaper --Operator fills the width of the first of (4) conveyors with blocks placed flat (horizontal joint) or on edge (vertical joint). First lay-up conveyor feeds (3) block staging conveyors. Block delivery is controlled by the operator and machine to feed the buffer conveyors and first Shaper. Combined, the conveyors facilitate keeping the system full and productive.? -- SEE END OF PROPOSAL FOR OPTIONAL 98" INFEED, (changes all inbound length specs to 98")(1) Block Feed and (3) Block Compartment Conveyors: -- 24" wide x 31.5" long. -- Each Conveyor Powered with 1/2 HP motors. -- Conveyors are controlled by the operator and system. -- Feeding at a constant rate of 180 FPM. FSR-62I Right Hand Inverter Type Finger Joint Shaper: -- Feed table is 24" wide and accepts blocks from 6" to 31.5" long x 5/8" to 6" wide. -- Shaper spindle is driven by a 20 HP motor. -- Spindle diameter is 50 mm and runs at 6,600 RPM. -- 6.3" Maximum shaper cutterhead diameter - without knives. -- 10 HP - 4,800 RPM Cutoff and trim saw; accepts 10" dia. x 100 tooth x 5 mm blades. -- (1) 2 HP - 2,850 RPM Scoring saw, accepts 7" dia. x 50 tooth x 5 mm blades. STC-62A Single Table Transfer Conveyor to the 2nd (Left Hand) Shaper: -- 24" Wide x 31.5" long. -- Powered with (1) 1/2 HP motor. -- Controlled by the system. -- Feeds at a constant rate of 180 FPM. FSL-62I Left Hand Inverter Type Finger Joint Shaper With Glue Extruder: -- Feed table is 24" wide and accepts blocks from 6" to 31.5" long x 5/8" to 6" wide. -- Shaper spindle is driven by a 20 HP motor. -- Spindle diameter is 50 mm and runs at 6,600 RPM. -- 6.3" Maximum shaper cutterhead diameter - without knives. -- 10 HP - 4,800 RPM Cutoff and trim saw; accepts 10" dia. x 100 tooth x 5 mm blades. -- (1) 2 HP motor powers a top and a 2nd 2 HP motor powers a bottom scoring saw, both running at 2,850 RPM; accepts 7" dia. x 50 tooth x 5 mm blades -- Conveyer powered by 1/2 HP motor. -- Table movement is Inverter driven; powered by a 3 HP + 3 HP inverter motor with cycle speeds from 1 to 4 cycles/Min. Motor senses load and varies travel as needed. Injection Type Glue Applicator: -- Extrudes adhesive into the fingers without messy runoff. -- 6" Comb height is standard. -- Finger pitch 4 mm. -- 10 - 12 mm finger length is standard equipment (special sizes made as optional equipment. STC-62A Single Table Conveyor Belt To The Assembly Section: -- 24" Wide x 31.5" long. -- Powered with (1) 1/2 HP motor. -- Controlled by the system. -- Feeding at a constant rate of 180 FPM. FJ-500A (198") Assembly Press With Cut-Off Saw: -- Capacity from 1" to 6” wide x 1/2" to 3" high x up to 16-1/2' long. -- A 2 HP motor powers the upper and a 2nd 2 HP motor powers lower pre-assembly rolls. -- 5 HP infeed inverter drive. -- In-f

Jeff Terrill
800-374-5009 ext:349
Call

2021 Cam-Wood MODEL FAH TYPE F1  Jointer and Finger Jointer
$407,700

CAM-WOOD TYPE F1, MODEL FAH 6” X 20’ HORIZONTAL FULLY AUTOMATIC FINGER JOINT SYSTEM - SINGLE CHAIN TYPEMECHANICAL SPECIFICATIONS FOR THE FEED SYSTEM: --Operating speed: 120 to 150 lugs per minute --Intermittent feed motor: 2HP + 1:25 --Feed chain motor: 30 HP (20kw) Servo Drive (C2) MECHANICAL SPECIFICATIONS: RIGHT-SIDE SHAPER: --Cutterhead Motor: 25 HP --Spindle size: 2-3/4” (70mm) --Maximum cutterhead body diameter: 10” --Cutterhead speed: 5,500 RPM at 60Hz --Trim Saw Motor: 15 HP --Trim Saw blade size: 12” (305mm) x 80 Tooth x 5mm kerf --Cut-off saw Speed: 4,300 RPM --Scoring saw motor: 3HP --Scoring saw blade: 7” (180mm) x 50 Tooth x 5mm --Scoring saw spindle speed: 4,200 RPM --Holddown rise and lower motor: 1/2 HP (C3) MECHANICAL SPECIFICATIONS: LEFT-SIDE SHAPER: --Cutterhead Motor: 25 HP --Spindle size: 2-3/4” (70mm) --Maximum cutterhead body diameter: 10” --Cutterhead speed: 5,500 RPM at 60Hz --Trim Saw Motor: 15 HP --Trim Saw blade size: 12” (305mm) x 80 Tooth x 5mm kerf --Cut-off saw Speed: 4,300 RPM --Scoring saw motor: 3HP --Scoring saw blade: 7” (180mm) x 50 Tooth x 5mm --Scoring saw spindle speed: 4,200 RPM --Holddown rise and lower motor: 1/2 HP --Glue Application by GLUE COMB --Standard glue height: 6” high, 3.8mm pitch 3.8mm. Finger lengths from 10 to 12mm (Other lengths available) (K) MECHANICAL SPECIFICATIONS: SHAPER OUT-FEED: --Speed: 230 FPM --Feed Motor: (1) 3 HP --Vacuum device blower with 3” Vacuum port: 5HP (G) MECHANICAL SPECIFICATIONS: PRE-JOINT ASSEMBLY: --Feed chain drive: (2) 3HP motors --In-feed Inverter: (1) 7-1/2 HP --Chain type: Flat top double chain --Feeding speeds from 30 to 300 FPM (H) MECHANICAL SPECIFICATIONS: 20’ (6.2M) ASSEMBLY PRESS: --Working dimension: 3/4” to 6” wide x 0.60” to 3” high x up to 20’ long --Upper & lower roll power: (2) 2HP motors --In-feed Inverter: 7-1/2 HP --In-feed speed: 30 to 300 FPM --PROGRAMMABLE Cut-off saw power: 5HP --Cut-off Blade dimensions: 14” dia. x 120 Tooth x 1” bore --Cut-off saw speed: 2,850 RPM --Hydraulic power: 5HP (With high speed oil tank) --Cycle Speed: 1 to 8 cycles per minutePRODUCTION CAPACITY - PARAMETERS: --Based on a 480-minute shift --Finger length to customer’s specifications --Average infeed length at the shaper section is 20” --Average block cross section is 2” x 4” --Chain speed at the Shaper sections is 150 lugs per minute --Press capacity is (8) 20’ loads per minute (maximum) CAPACITY OF THE SHAPERS WHEN FINGER JOINTING 2” X 4” x 20" BLOCKS --(120) Blocks per minute --x 20” Average infeed length --x 480 Minutes per shift --x 0.8 Rate of utilization = 76,800 lineal feet per shift CAPACITY OF THE PRESS ASSEMBLING 20’ LENGTHS: --(8) Assembled lengths per minute --X 20’ Per minute --X 480 Minutes per shift --X 0.8 Rate of utilization = 66,440 lineal

Jeff Terrill
800-374-5009 ext:349
Call

2021 Cam-Wood SFJ-15G  Jointer and Finger Jointer
$4,170

CAM-WOOD MODEL SFJ-15G AUTOMATIC FINGER JOINT GLUE APPLICATOR -- Pneumatic operation; The glue "comb" moves up and down pneumatically to bring adhesive from the glue pot to the joint while ensuring an even glue spread for fast, efficient application.

Jeff Terrill
800-374-5009 ext:349
Call

2021 Cam-Wood SFJ-3800-205-FM-FAH  Jointer and Finger Jointer
$599,700

CAM-WOOD MODEL SFJ-3800-205-FM-FAH HIGH SPEED, LONG BOARD, HORIZONTAL JOINT, FINGER JOINTER: -- Double Chain & Slat Type Shaper Section designed for long incoming boards -- Manual infeed; Slat Bed Feed Chain runs at up to 75 FPM; lugs on 30" centers. Slat Bed powered with a 15 HP gear motor with 1:40 gear ratio. -- Table Transfer Roll Motors, even ends boards to the Right and Left Shaper Fences: powered by (2) 7-1/2 HP motors -- Power raising and lowering of the holddown assemblies on both Shaper Sections; Powered with (2) 2 HP motors -- (1) Pair Scoring Saws with 2 HP motors, 50mm arbor, 2,850 RPM, scoring blade size of 7” x 50 tooth, (4) Blades included -- (1) Pair Trim Saws with 10 HP motors, 50mm arbor, 4,275 RPM, trim saw blade size of 10” x 100 tooth. (2) Blades included -- (1) Pair Vertical Hogging Shaper Spindles with 10 HP motors, 50mm arbor, 4,375 RPM, hogging blade size of 9.4” x 50 tooth. (2) Blades included -- (1) Pair Vertical Finish Shaper Spindles with 20 HP motors, 50mm diameter spindles, 5,300 RPM. For -- 50mm bore x 160mm dia. cutterheads; finger length of 1.122”; cutterheads and knife profile to buyer’s specification -- Extrusion Type Glue Application System for PVAC Glues; mounted on Right Side Shaper Section. Includes glue pump, valves, and glue injection thru the applicator comb machined to buyer's specifications. -- Optional APQUIP Glue System available at extra cost -- Optional Glue Equipment available for Loctite HB X Glue at extra price -- Deduct $5,200 if provided without a Glue SystemSCC-20 TRANSFER CONEYOR -- Conveyor between Shaper Section to the Press Section -- Working dimension: from 1” to 8” wide x 12” to 12’-6” long -- Speed 230 FPM -- Powered by (1) 3HP HSC-65 HIGH-SPEED PRE-PRESS ASSEMBLY SECTION -- Working dimensions: 1” to 8” wide x 3/4” to 2-1/4” high x up to 21’ long -- (2) 5 HP motors drive the double flat top chains -- Feed speeds from 32 to 295 FPM -- Includes (1) 15 HP Frequency Converter to power the feed chain motors at speeds determined by incoming boards lengths NFJ-1500 50’ HEAVY DUTY AUTOMATIC ASSEMBLY PRESS -- Working dimension: 1” to 8” wide x 3/4” to 2-1/4” high x up to 50’ long -- Power of upper rollers: (2) 3HP motors with a 1:10 gear ratio -- Power of lower roller: (1) 5HP motor with a 1:10 gear ratio -- In-feed Inverter: (1) 15HP motor -- In-feed speed: From 32 to 295 FPM -- Cut-off saw: With 7.5HP motor driving the arbor at 2,850 RPM -- Sawblade: 14” diameter x 120 tooth -- Hydraulic power to the Pressing Cylinders: (2) 20HP with high speed oil tank -- Hydraulic pressure output: 1,700 PSI at the joint -- Capacity (1) to (4) 50’ assembled boards per minute -- Machine comes arranged with equipment to assemble (3) sizes of material cross sections according to buyer’s specifications for width within +/-3/16” width toleranceSYSTEM REQUIREM

Jeff Terrill
800-374-5009 ext:349
Call

2021 Cam-Wood SFJ-4500A  Jointer and Finger Jointer
$27,700

CAM-WOOD SFJ-4500A AUTOMATIC FINGER JOINT ASSEMBLY & CUTOFF SAW SYSTEM Description: -- The SFJ-4500A is an automatic Assembly System, Cutoff Saw, and Press. The system performs three functions; pre-assembles finger jointed blocks with glue previously applied in the SFJ-15G Glue Applicator, cuts the assembled boards to length, and performs the final assembly when pressed by a powerful hydraulic system. When pressing is complete, boards are fed out of the Press. -- Power feed for feeding boards, stops automatically at the desired board length using the included cut-off saw as standard equipment for cutting boards to length. -- The maximum assembled board length is 16'. Other sizes are available on request.Specifications: -- Max. length capacity, 181"; max. width, 6"; max. thickness, 3". -- Feed speeds from 0 - 26 FPM; -- Cutoff Saw runs at 3,500 RPM and is powered by a 2 HP motor; Blade diameter is 12" with a 1" arbor; -- With 1/4 HP feed motor and 5 HP hydraulic pump motor. -- Footprint is 277" long x 48" wide x 60" high and weighs 3,529 lbs.

Jeff Terrill
800-374-5009 ext:349
Call

2021 Cam-Wood SFJ-530  Jointer and Finger Jointer
$24,700

CAM-WOOD SFJ-530 Finger Joint ShaperSingle Fingerjoint Shaper with 8" min. and unlimited max. block length; 6" max. block thickness; 12" max. block width (horizontal joint only); 16" table working width.Equipped with: -- Shaper spindle powered by 15 HP belt drive motor with 50 mm dia. spindle turning at 9,000 RPM; swings 6" max. dia. cutter. -- Trimsaw powered by 3 HP direct drive motor at 3,500 RPM and a 1" dia. saw spindle; swings 10" max. blade dia. -- Table cycles 2-1/2 times per Min via hydraulic system with 2 HP hydraulic power unit. Includes 5" dia. dust outlet.Features: -- Manual Fingerjointer performs end trimming and shaping functions on right and left end of blocks. -- Air-operated clamp holding blocks firmly in place. After work piece is clamped, table feeds past the saw and shaper spindles to perform trimming and fingerjoint operations; trim saw cuts blocks exact 90 degree ends. -- Shaper spindle is precision-constructed for cutting fingers accurately; swings up to 6" dia. tooling. -- Spindle height adjustment displayed on dial readout for easy adjustment. -- Table travels on a precision linear guide for stability; table traverse driven by hydraulic power system smooth and accurate block feeding. -- Variable feed speed permits proper feed for hard or soft wood. -- Cast iron frame and table for durability.Also available at extra cost: -- Fingerjoint glue applicator, add $3,790 -- Fingerjoint assembly press, add $26,990

Jeff Terrill
800-374-5009 ext:349
Call

2021 Cam-Wood SFJ-530  Jointer and Finger Jointer
$56,700

CAM-WOOD SFJ-530 Single Shaper Finger Joint System (Complete);System complete with (1) Shaper, Glue Applicator and 16' Assembly Press with Cut-Off Saw. CAM-WOOD SFJ-530 Finger Joint Shaper: -- Finger Joint Shaper with 8" min. and 39" max. block length; 6" max. block height for vertical joints; 16" max. block width for horizontal joints; 16" table width available for horizontal or vertical joints.Equipped with: -- 2" (50 mm) dia. shaper spindle is belt driven and powered by 15 HP motor; spindle turns at 9,000 RPM and swings 6" max. dia. cutter. -- Trimsaw powered by 3 HP direct drive motor at 3,500 RPM; with a 1" dia. spindle; swings 10" max. blade dia. -- Table cycles up to 2-1/2 times/Min via hydraulic system with 2 HP hydraulic power unit. Includes 5" dia. dust outlet.Features: -- Finger Jointer performs end trimming and shaping functions on right and left end of blocks. -- Air-operated vertical and horizontal clamps hold blocks firmly in place. After work piece is clamped, table feeds past the saw and shaper spindles to perform trimming and finger joint operations; trim saw cuts blocks to exact 90 degree ends. -- Shaper spindle is precision-constructed for cutting fingers accurately; swings up to 6" dia. tooling. -- Spindle height adjustment displayed on dial readout for easy adjustment. -- Table travels on a precision linear guides for extreme stability; table traverse driven by hydraulic power system for smooth and accurate block feeding. -- Variable feed speed permits proper feed for hard or soft wood. -- Cast iron frame and table for rigidity and durability.CAM-WOOD SFJ-15G Automatic Finger Joint Glue Applicator. --Pneumatic operation; glue "comb" moves up and down pneumatically to bring adhesive from glue pot to the joint while ensuring an even glue spread for fast, efficient application.CAM-WOOD SFJ-4500A Automatic Finger Joint Assembly System. --The "SFJ-4500A" is an Automatic Assembly System, Cutoff Saw, and Press. --The system performs three functions --1. Pre-Press assembles finger jointed blocks with glue previously applied by the included SFJ-15G Glue Applicator --2. Cuts the assembled boards to length --3. Performs the final assembly when pressed by a powerful hydraulic system. When pressing is complete, boards are fed out of the Press --Power feed for feeding "cut-to-length" parts; stops automatically at the desired board length, using the Presses cut-off saw for cutting boards to fixed length. --The maximum assembled board length is 16'. Other sizes are available on request.Specifications: --Max. capacities: 195"; max. width, 6"; max. width, 3" max. height. Feed speeds from 0 - 26 FPM --Cutoff Saw runs at 3,500 RPM and is powered by a 2 HP motor; Blade dia. is 12" with a 1" arbor; --Includes 1/4 HP power-feed for cutting ribbons to predetermined lengths. 5 HP hydraulic power-pack for pressing. --Footprint is 24' long x 4' wide x 5' high (3,529 Lbs.)

Jeff Terrill
800-374-5009 ext:349
Call

2021 Cam-Wood SFJ-IA-620/C  Jointer and Finger Jointer
$109,700

CAM-WOOD MODEL SFJ-IA-620/C INVERTER DRIVE AUTOMATIC FINGER JOINT MACHINECuts vertical or horizontal joints depending on how blocks are loaded.Complete With: -- Right & Left Shapers -- Extrusion Type Glue Applicator -- Automatic Cutoff Saw -- Inverter Driven Assembly Press -- Makes vertical or horizontal joints, depending on block loading -- Fully automatic finger joint production line, produces finger jointed boards from short blocksShaper Features: -- Right Hand Shaper end trims incoming blocks and shapes fingers on the right end of blocks. -- Left Hand Shaper end trims, machines fingers on opposite ends AND applies adhesive to the fingers. -- Each Shaper is equipped with (1) saw blade for squaring of blocks and (1) sawblade for scoring blocks to ensure a clean joint and (1) shaper spindle for machining fingers. -- Air-operated holddown clamp holds blocks firmly in place. After blocks are clamped, the Shaper table feeds past trimming, scoring, and shaper tooling. -- Left end Shaper applies PVC adhesive with the use of extrusion equipment -- Precision Shaper spindles constructed to cut accurate finger profiles; spindles accommodate up to 6” dia. cutter heads capable of vertical finger jointing up to 6” high. -- Spindle height adjustment is displayed on a digital readout for easy adjustment. -- Shaper tables travel on precision linear guides. -- Table traverse feed is by inverter feed system which ensures a constant and smooth flow the blocks, resulting in accurate and precise cuts. -- When the Right Hand Shaper completes its cutting process, the conveyor table automatically transfers blocks to Left Hand Shaper via and intermediate belt conveyor, then returns to the starting position to accept new blocks. -- When the Left Hand Shaper is finished, blocks with adhesive on one end are automatically transferred to the Assembly Press.Press Features: -- The Press is automatic and performs (3) functions: preliminary assembly of finger jointed blocks, cutting the pre-assembled blocks to a predetermined length, and final assembly or “squeeze", which is powered by a heavy duty hydraulic system. -- When pressing is complete, assembled boards are feed out of the Press onto outfeed arms. -- Includes inverter driven infeed chains for fast feeding of blocks to positionable stops set according to the finished board length. -- Cut off saw automatically cuts to length as the stop is contacted. -- The maximum length of assembled boards is 17'. Longer or shorter Presses are available. -- System employs an advanced programmable logic controller for ease of operation and maintenance.The machine's motion sequences are displayed by signal lights for easy troubleshooting in the event of a malfunction.Shaper Specifications: -- Shaper Capacity: 3/4” to 6” thick x 8” to 31” long. -- Intermediate block conveyors between Shapers are 24" wide x 30" long and powered by 1/2 HP motors. Max. height accepted by table: 6”. -- Extru

Jeff Terrill
800-374-5009 ext:349
Call

2021 Cantek FL-08  Jointer and Finger Jointer
Call for Price

CANTEK MODEL FL-08 AUTO FINGER JOINT LINE with the following: -- AUTO INFEED TABLE -- Table Size: Length 35.4", Width 23.6" with (2) 1/2 HP motors -- AUTO FINGER SHAPER - LEFT -- Table Size: 23.6" wide; Block Lengths from 6" to 35"; Block Widths for Vertical Joints, 3/4" to 2.36"; Width for Horizontal Joints, 6" (wider possible – optional); Thickness for Vertical Joints, 3/4" to 6.3"; Thickness for Horizontal Joints, 3/4" to 2.36" -- With 20 HP Finger Joint Spindles, 5 HP Trim Saws, 2 HP Bottom Scoring Saws, 1/2 HP Feeding Conveyor with Variable Speed Frequency Drive. Includes Saw Blade. Without FJ Cutter. Table speed, 3 to 4 Cycle/Min. -- AUTO FINGER SHAPER - RIGHT -- Table Size: 23.6" wide; Block Lengths from 6" to 35"; Block Widths for Vertical Joints, Widths 3/4" to 2.36" for Horizontal Joints, 6" (wider possible – optional); Thickness for Vertical Joints, 3/4" to 6.3"; Thickness for Horizontal Joints, 3/4" to 2.36" -- With 20 HP Finger Joint Spindles, 5 HP Trim Saws, 2 HP Bottom Scoring Saws, 1/2 HP Feeding Conveyor with Variable Speed Frequency Drive. Includes Roller Type Glue System. Includes Saw Blade, Without FJ Cutterheads. Table speed, 3 to 4 Cycle/Min. -- TRANSFER ROLLER TABLE -- 35.4" long X 23.6" wide -- TWO-STAGE AUTO FINGER ASSEMBLER -- 16' max. Output Length, Shorter or Longer on request, width 3/4" to " 6.3", thickness 3/4" to 2.36". With 2 HP for Feed Table, 5 HP for Sizing Saw, 5 HP Hydraulic Pump. Includes Cutoff Saw Blade. Cycle Speeds to Max. 3 to 4 Piece/Min. -- Electricals as desired: 230V, 460V or 575V 3-phase 60-cycle, to UL/CSA Standards. Includes Wye Delta Soft-Start Starters -- NOTE: For best performance, blocks should be surfaced 4-sides thru a Moulder prior to feeding Finger Jointer

Jeff Terrill
800-374-5009 ext:349
Call

2016 CKM FJ-17  Jointer and Finger Jointer
$43,700

CKM FJ-1 Semi-Automatic Finger Jointer w/Assembly PressINCLUDES (2) FINGER JOINT SHAPERS: -- (1) Semi-Automatic Left Hand Finger Joint Shaper -- Working dimension: 40” long x 17-3/4” wide x 6” high -- Shaper spindle powered by 15 HP motor -- Trimming & chipping saws powered by 5 HP motor -- Trim Saw blades are 10” dia. x 100 tooth -- Hogging Saw dimension are10” x 12 tooth -- (1) Semi-Automatic Right Hand Finger Joint Shaper with Glue Applicator -- Working dimension: 40” long x 17-3/4” wide x 6” high -- Shaper spindle powered by 15 HP motor -- Trimming & chipping saws powered by 5 HP motor -- Trim Saw blades are 10” dia. x 100 tooth -- Hogging Saw dimension are10” x 12 tooth -- With adhesive applicator (3) GRAVITY ROLLER TABLES: -- Each Table is 18” wide x 36” long -- (1) Table at the Infeed -- (1) Table between Shapers -- (1) Table at the Press --(See drawing for exact Table position) (1) FINGER JOINT ASSEMBLY MACHINE -- Working dimensions are 17’ long x 5-1/2” wide x 3” high -- 5 HP Cut-off Saw, accepts 14” diameter x 120 tooth sawblade -- Infeed rolls powered by a 2 HP inverter motor -- Infeed table rolls powered by 2 HP inverter motor -- 5 HP Hydraulic Pump for squeeze pressure -- Capacity: Up to (4) Press loads per minute, depending on inbound block lengthsNOTE: Equipment available end of February, 2021

Jeff Terrill
800-374-5009 ext:349
Call

2010 Furnimate MADONNA MINI-AT  Jointer and Finger Jointer
$25,000

FURNIMATE MODEL MADONNA FINGER JOINT SYSTEM --CAPACITIES: --Incoming block capacity when Vertical Jointing, 0 .6" to 4" wide --Incoming block capacity when Horizontal Jointing, up to 6" wide --Block thickness: up to 4" thick --Block length: from 6" to 24" long --Output length to 79" to 142" --Shaper output, 6-cycles (tables) per min. --Assembly Press output capacity, up to 4-assembled and pressed lengths per min. (Dependent on shaper input lengths and assembled output lengths.)MECHANICAL SPECIFICATIONS: --Infeed conveyor: 18" wide x 35" long Belt Conveyor powered by 1/2 HP motor with constant feed speed of 65 FPM. --Left Hand Shaper: 18" wide table and 6" to 24" length cap.; 0.6" to 4" working height; table stroke powered by 1/2 HP feed motor and 1:10 gearbox. 5 HP trim saw swings a 10" dia. blade; shaper spindle powered by 10 HP motor, with 50mm dia, x 6" long spindle and swings a 160mm dia. cutterhead. Table cycles 2-6 times per minute; requires 85 PSI air and a 8" dia. dust outlet. --Transfer Conveyor: 18" wide x 35" long Belt Conveyor powered by 1/2 HP motor with constant feed speed of 65 FPM. --Right Hand Shaper: 18" wide table and 6" to 24" length cap.; 0.6" to 4" working height; table stroke powered by 1/2 HP feed motor with 1:10 gearbox. With 5 HP trim saw swings a 10" dia. blade; shaper spindle powered by 10 HP motor, 50mm dia, x 6" long spindle swings a 160mm dia. cutterhead. Table cycles 2-3 times per minute; requires 85 PSI air and a 8" dia. dust outlet. Includes glue injection system powered by 1/2 HP VFD motor. --Assembly Press with Cutoff Saw: Capacity: 0.6" to 6" wide x 0.6" to 3-1/2" thick x 79" to 144" length cap.; with 1 HP motor and 1:15 gearbox for raise; 1 HP motor and 1:15 gearbox for down feed; 5 HP inverter motor drive to the crowder rolls with adjustable pressure system; cut-off saw with 5 HP motor, swings 14" dia. blade, 4" dia. dust outlet; final pressing by hydraulic system with 33,500 and up to 89,000 PSI possible, hydraulic power pack with 80 liter tank, 5 HP pump motor and 1/4 HP cooling fan. Press cycles 2 to 4 lengths per minute. Press requires 80 PSI air.OPERATIONAL PROCESS: --Operator loads the Infeed Belt with pieces on edge for Vertical Joint or flat for horizontal joint. --Pieces automatically feed to the 1st Trim Saw, then into the 1st Finger Joint Cutterhead at the left Shaper. --When complete, the pieces automatically cross convey onto another auto feed belt to the 2nd Trim Saw and 2nd Finger Joint Head and pass through the Glue application station at the right Shaper --Pieces outfeed onto a roller conveyor for inspection for joint quality and glue spread and feeding into the press section. --Operator feeds the pieces one after the other into the press until the desired length is reached; the continuous ribbon of finger jointed blocks is cut to length at the auto cutoff saw. --Finished boards automatically feed sideways into the Hydraulic Press. --Once pressing is complete the finished board is pushed out

 ATLANTIC CDN, AL
EX-FACTORY INC.
704-841-2001
Call

Galt Canadian FJ-80  Jointer and Finger Jointer
$10,900

GALT CANADIAN FJ-728 Low Production Finger JointerComplete with self-feeding table with holddown clamps, hydraulically stroked past trim saw and cutterhead.Specifications: -- Trimsaw powered by 3 HP direct drive, 3,600 RPM arbor motor; uses 8" dia. blade. -- Shaper with 7-1/2 HP spindle motor, 1-1/4" spindle, 7" vertical spindle travel, 6-3/4" cap. under nut. - (4) spindle speed settings of 3,500 - 6,500 - 8,000 & 10,000 RPM, reverse rotation switch, 45" x 35" table, 12-1/2" max. tooling dia.; 36" table height. -- Includes cutter guard, dust outlets, self-braking motor, spindle lock, emergency stop and motor control center for all motor and electrical functions. -- Finger Joint Assembly Machine complete with material clamps and squeeze press. Assembles a pair of joints per cycle; operator "steps" the assembled length past the automatic cutoff saw.When a length stop is contacted by the assembled length, the cutoff saw fires, cutting up from under the table, and the finger jointed board is cut to its specified lengths. Long lengths can be assembled by relocating the length stop. -- Tooling: (1) Milled to pattern cutterhead and (1) each carbide tipped Retrim and Cutoff Sawblades.

Jeff Terrill
800-374-5009 ext:349
Call

1995 Grecon RESTOMAT 2  Jointer and Finger Jointer
$17,700

GRECON MODEL RESTOMAT 2 Vertical and Horizontal Finger Jointer -- Machines a wide array of vertical and horizontal finger joint patterns depending on tooling -- Specifications: Infeed block lengths from 6" - 40" max.; thickness 3/4" to 2" max.; timber width 1-1/2" to 8" max. vertical, wider with horizontal joints. -- Board outfeed press length of 10'. -- Finger Joint Shaper: Single-shaper design, including transport belt in the clamping station. -- Equipped with: Fixed limit stop, adjustable to align the package; trim saw with 5 HP motor and shaper spindle with 15 HP belt drive, shaping.. -- The guiding device of the shaper table consists of stable guide rollers; blocks are clamped by means of pressure controlled horizontal and vertical clamping device. -- With Roller Type Glue Application s]System including (1) 2" and (1) 8" tall applicator roll -- Finger Joint Press: With board ejection to the side; designed to press finger jointed lumber to a fixed final length up to 10' long; the feeding & pressing process is carried out at (1) working level; the infeed blocks are pre-pressed by means of the press control. Hydraulic power pack; 8 ton max. thrust force; 3 HP saw motor and 15" dia. sawblade for cut to length finger jointed boards. With (1) 10" dust outlet at the Shaper Section and (1) 4" dust outlet at the Press cut off saw. Requires (1) 1/2" compressed air connection. -- Above specifications are thought to be accurate. As always, verify for yourself. -- Function/Process: Infeed operator loads blocks onto table and presses start button. Table travels past the trim saw and shaper spindle to cut fingers on 1st end of blocks. Table automatically returns to infeed operator. Cutter head offsets automatically for second pass. Infeed operator spins table and table automatically starts second pass. After fingers have been machined on the 2nd end, glue is applied to the fingers as the table travels to the press operator. Press operator hits release button and blocks are delivered to press operator and the table automatically returns to infeed operator. Press operator assembles cut stock until a full 10’ length of blocks is achieved. Press operator uses both hands to press buttons that start the chop, press, eject cycle. -- NOTES: -- Machine is currently operating daily in Northern California and will be available for removal the second week of April, 2021. -- Includes many spare parts including a "Spare Parts Machine" -- Owner is expanding operations and making room for new machinery.

 WEST COAST, AL
EX-FACTORY INC.
704-841-2001
Call

Hackett 12 Jointer  Jointer and Finger Jointer
Call for Price

This Hackett jointer may be old but the seller has confirmed that this thing still works great! The only reason he has decided to upgrade is because he needs a machine with a helical head. This is ready to load! - 12" - 3 phase

Carolina Machinery Sales, Inc
704-288-1904
Call

Industrial 3870 & FJA-100  Jointer and Finger Jointer
$149,800

INDUSTRIAL FINGER JOINTER: MODEL 3870 SHAPER & FJA-100 ASSEMBLY MACHINE: -- Model 3870 Dual Finger Jointer Shapers with feed chain speeds of 45 FPM via 5 HP fixed speed electric drive. Shaper is furnished with (2) 1-13/16” dia. 10 HP cutterhead spindles and (2) 5 HP trim saw motors and an automatic roll type glue spreader with pressurized glue tank. -- Production rates are: 60 lugs per minute with lugs on 9" centers and blocks up to 6” wide or 45 lugs per minute with lugs on 12" centers and blocks up to 8” wide. -- Shaper will accommodate blocks from 5-1/2” minimum to 48” maximum length x 1-1/2” minimum to 8” maximum width x 5/8” minimum to 2” maximum thickness. -- FJA-100 Finger Joint Assembly Machine with automatic operation and pneumatic pressure; assembles blocks up to 16’ long. The machine stops during the cut-off and press cycle. Variable feed speeds up to 100’ per minute. -- Offer includes a reconditioned Shaper Section, Assembly Machine, Glue Applicator, and Electrical System. -- This System requires (3) people to operate; (1) to feed the Shaper, (1) to inspect and transfer blocks to the Assembly Machine, and (1) to off-bear the Assembly Machine. -- All equipment will be checked out completely including, but not limited to, all motors being megged and tested, all bearings reviewed and replaced where necessary, the chains, rails and hold downs reviewed and replaced as needed. -- The buyer is encouraged to inspect the machine and test run the their parts when the reconditioning has been completed. Requires buyer's material prior to the run off. -- Cutterheads and tooling are not included but can be supplied at additional cost -- NOTE: APQUIP Gluing System can be adapted to this System. Cost is unknown at this time. -- Delivery is approximately 8 weeks after receipt of deposit. -- Payment Terms: 50% deposit with order, 40% upon completion of successful run off, balance upon completion of run-off.

Jeff Terrill
800-374-5009 ext:349
Call

Industrial FJS25  Jointer and Finger Jointer
Call for Price

Industrial Woodworking JFS25 Finger Joint Line

Carolina Machinery Sales, Inc
704-288-1904
Call

1984 Industrial VSS/ASC  Jointer and Finger Jointer
$15,700

INDUSTRIAL MACHINE'S MODELS VSS, ASC & M-100 FINGER JOINT LINEFor up to 4" high x 12" width max. material, vertical stroke finger joint head, 10 HP belt driven, center fence allowing material to be jointed on edge, (2) pieces (1) each side. -- "M-100" L-shaped transfer table to the assembly press, includes MGA manual glue applicator with 3" wide applicator roll. -- "ASC" Assembly Squeeze Clamp, 4" high x 12" wide max. cap. -- "A-100" Semi-Automatic Cutoff Saw, 3 HP saw motor, up-cut type saw; 12' roller conveyor and limit switch for cutoff. - Production rate approx. (6-10) joints per minute, depends on block lengths. -- NOTE: The old girl may need a little "fiddling" with, but it ran fine when parked a few months ago.

Jeff Terrill
800-374-5009 ext:349
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved