Woodworking Equipment For Sale

(3) Baker Wood Wizzes 6x, variable speed 5.5 HP motors, 480 volt with 6X cutter heads available, The Wood Wizz is a machine that is designed to surface and finish slabs, burls, tabletops and even recycled timber with a lower labor input. The machine is ideal for woodworkers who want to add value to their material and produce a perfect finish without any tearing, ridging, or burn marks. The Wood Wizz runs on a X, Y and Z axis. It includes a large 6" cutter, 10 square cutter inserts, speed controller, two inverters, sanding disk with pads & sand paper, dust tower, dust hosing and fittings. Also includes an edging/joining cutter to combine two or more pieces of material flawlessly. 3 machines very lightly used and in perfect shape. 6x wood wizz footprint is 7’7” wide x 19” 6” long, processing area is 6’ wide x 17” 10” long adjustable leveling legs, welded steel frame. $20,500, 21,000 and 21,500 each. Machines all have about the same hours and are approximately 4 to 6 years old. Contact Michael at [email protected] 828 779 7102 Machinery located in Jacksonville Fl.

MAKE: HOMAG TYPE: CENTATEQ T-300 S/N: 0201739344 YEAR: 2024 Vector speed [m/min] (X - Y) 141 - (Z) 19 Compressed air [bar] 7 Compressed air connection [Inches] R 3/4 Suction stubs [mm] 2 x 250 Suction capacity [m3/h] 2 x 4,950 Electrical connection value [kW] 46 MINOR SHIPPING DAMAGE REPAIRED BRAND NEW, NEVER INSTALLED (PACKAGED AND WRAPPED) PURCHASED THROUGH AN INSURANCE COMPANY REPLACEMENT COST: $400,000 OUR PRICE: $195,500.00 SPECIFICATION SHOWN ARE TO BE USED AS A GUIDELINE ONLY. IT IS THE CUSTOMER RESPONSIBILITY TO CHECK FOR SIZE AND FEATURES BEFORE PURCHASING WE WILL NOT BE RESPONSIBLE FOR ERROR OR OMISSIONS.

Progressive multiblade gang saw, 75/60HP, vin #4VF 365TSTFS8001BVF2, we can load. Price Reduced! $21,500 931-205-8475

Selling a complete Planermill Line -Infeed, tilthoist, landing table, pineapple feed and transfer. -Stetson Ross 6-10-A1 Planer/Moulder c/w assortment of changeable 12 knife side heads can dress up to 6” thick, 8 knife top/bottom heads, 12” wide. Moulder heads with plenty of attachments. -Outfeed Belt, Slowdown Belt, accumulation transfer, lug loader, board turner, Canadian Trimmer with an assortment of trim length stops, trim block belts, green chain and stacking carts. Great planermill, ran 120,000fbm per shift when in production. 600V, 3phase, 60Hz system. Call/text for more details

Used Torit 376RF10 Reverse Air Bag House, 4,892 SQ/FT Cloth Media, 39,000 CFM Capacity @ 8:1 Air/Cloth Ratio, 12” Rotary Valve, Structural Support, Good Condition, $65,000

Weinig Profitmat 22N 5 Head. Inlcudes 5 additional 9” planer heads and many extra parts. Machine is in great shape ready to be installed.

Weinig Unimat 318 Moulder 6 head moulder Crating and shipping not included in price 1,172 hours 1,830,725 LF of material processed 2015 Serial 121763 Exhaust manifold included with tools and a few heads not shown. Upgraded to new machine. This machine is an excellent running machine.

15" color "Touch Screen" with Industrial Computer for setup and running CNC control of machine setup in less than one minute All components sized to handle 6x30 dowels Three v-groove heads with minimum 4" center to center Three banks of nine spindles for drawer front drilling One additional nine spindle bank to handle four sided drawers Two nine spindle horizontal banks for dowel drilling Runs up to 22 parts/minute in production Application Ability to v-groove drawer parts from 25" to 96" in length Ability to run parts as short as 10" without v-groove Ability to handle parts from 2-1/2" to 13-3/4" in width Ability to handle material thicknesses of 7/16" & 1/2" Makes box drawers with dowel construction Makes box drawers with 3 miters & 1 butt joint CNC Setup of machine Hopper loading of parts Parts feed through to the rear of the machine Like New Machine has run less than 100 parts. NEW PRICE: $235,000

15" color "Touch Screen" with Industrial Computer for setup and running CNC control of machine setup in less than one minute All components sized to handle 6x30 dowels Three v-groove heads with minimum 4" center to center Three banks of nine spindles for drawer front drilling One additional nine spindle bank to handle four sided drawers Two nine spindle horizontal banks for dowel drilling Runs up to 22 parts/minute in production Application Ability to v-groove drawer parts from 25" to 96" in length Ability to run parts as short as 10" without v-groove Ability to handle parts from 2-1/2" to 13-3/4" in width Ability to handle material thicknesses of 7/16" & 1/2" Makes box drawers with dowel construction Makes box drawers with 3 miters & 1 butt joint CNC Setup of machine Hopper loading of parts Parts feed through to the rear of the machine Like New Machine has run less than 100 parts. NEW PRICE: $235,000

ACCU-SYSTEMS H49 CNC BORE, GLUE & DOWEL INSERTER: -- Specifications: (2) Working zones and an overall 49" max. width capacity. --(1) CNC Controlled head assembly with rapid (side-to-side) traverse, assembly with boring, gluing & insertion unit, 1 HP - 18,000 RPM drill motor. -- (4) Vertical pneumatic hold-down clamps, function selector control for boring only or doweling, adjustable drilling speed. -- 1-9/16" (40 mm) Max. dowel length, setup for 8 mm dowel dia.; height adjustment up to 1-1/8" material thickness with digital readout. -- Operator Interface: CNC "Color Touch-Screen" Controller for function & part programming and program storage. -- Complete with:(1) 12" Dia. vibratory feed hopper. Totally sealed electronically metered glue system with 1-button flushing. -- 100 PSI high power glue pump, 2-1/2-gal. glue tank. Anti-slip table surface. 49" "X" axis cap. -- Rack & pinion drive, and centralized dust collection manifold.

Accu-Systems MMTJ Door Machine

AEM 36" Sander

AEM 401-43 WIDE BELT SANDER1-Head, 43" width cap., combination sanding head with a 6" dia. rubber covered contact roll and 1-1/2" wide finishing platen.Specifications: -- 20 HP Main drive motor; 1.5 HP variable feed speed motor for 5 - 50 FPM. -- Abrasive belt size 43" x 60", with air tensioning and POSI-TRACK electronic abrasive belt tracking. -- Double infeed & double outfeed rubber covered holddown rolls, -- 0" - 8" Manual part thickness opening with mechanical digital readout, (4) screw jacks for conveyor bed opening.Complete with: -- Infeed conveyor extension with safety stop bar and motor load meter. -- Heavy Duty endless conveyor belt. -- Quick release outboard support. -- Air operated disc brakes on main motor of positive stopping of sanding head in (4 - 7) Seconds. -- Emergency stop functions at pinch points. --Centralized control panel. -- Comes with: Extra Sanding Drum that can be recovered Replaced with new drum and bearings about 5 years ago. Comes with a quite a few sanding belts.

AEM 8 Narrow Belt Sander

AES SIRIUS 950M ATC CNC MACHINING CENTER (FEED THRU): -- Specifications:Automatic CNC feed through Point to Point Boring Machine that combines flexibility and high productivity.A perfectly suited solution for small to midsize companies & artisans in need of an automatic solution for precision drilling with a low cost investment.Parts can be discharged at the opposite end of the machine for automated material handling or returned to the Operator for manual unloading. -- Working Capacity:Max. panel size on X-Axis is unlimited; Y-axis is 37.4" (950 mm); Z-axis is 2-3/4" (70 mm).Min. panel on size X-axis is 9.84" (250 mm); Y-axis is 3.14" (80 mm); Z-axis is 0.31" (8 mm). -- Positioning Speed: Panel feeding speed of 229 FPM (70 MPM); Y-axis at 229 FPM (70 MPM); Z-axis at 65 FPM (20 MPM).Axes positioning by AC drives & brushless Servo motors; the Panel moves in X-axis & the boring head moves in Y & Z-axes. -- Work Area:NC Controlled "Optical Material Sensor" creates a zero-panel reference point by reading the panel ends; this ensures that RH & LH (mirror image) panels will always be symmetrical.High precision clamping automatically positions the workpiece. Automatic presser moves independently and adjusts to workpiece thickness. Pneumatic side pusher make locating workpiece accurate and efficient. LH Side pressure clamp with automatic adjustment & pneumatic locking according to the panel width.Scratch resistant air floatation tables make for ease of loading and unloading from either side of the machine. -- Boring Unit:HSD Drilling head; 3 HP (2.2 kW), variable speed from 4,500 - 8,000 RPM motor. (10) Independent vertical spindles on 32 mm centers; (5) spindles in X-axis & (5) spindles in Y-axis.(6) Horizontal spindles with (2 + 2) in X-axis & (1 + 1) in Y-axis.(1) X-Axis grooving saw for max. 120 mm dia. blade; variable speed from 5,500 - 10,000 RPM. -- Machining:HSD 7 HP (5.5 kW) spindle; variable speed from 1,000 - 18,000 RPM with manual tool change system.(1) 6-Position ATC Automatic Tool Change system with ATC rotary magazine. -- Operator & Machine Control: PC Based user-friendly, icon-driven control housed on the main machine base; displays programming graphics, functions, and machine data. -- Complete with: Users & Maintenance Manuals; ALPHACAM "Essential" is provided with machine for ease of programming at the Controller. -- Software Disclaimer:EX-FACTORY INC. offers NO warranty or support, written or implied concerning any/all "optional" or "additional" manufacturer or 3rd party software supplied with this machine. All software related issues including re-licensing fees/requirements/functionality & training is ultimately the sole responsibility of the "Buyer".Actual Model is: AES SIRIUS 950M - ATC

ALDO BERRONE AIRONE 2 Single End Tenoner3-Station Tenoner with Trim; top & bottom tenons and cope head with manual sliding table. -- 1st Station: Trim saw, 10" max. dia. saw blade. -- 2nd Station: Top & bottom tenon heads, 25 mm dia. x 3-15/16" long spindles, 3/16" - 2-1/16" max. tenon thickness, 3 HP motor belt driven to saw & tenon heads. -- 3rd Station: Cope head, 35 mm dia. x 3-15/16" long spindle, 9-7/8" - 11-7/8" max. cutting circle, 2 HP motor. Equipped with: --² 15" Long x 12" wide sliding table (approx. 50" travel), tilts 0ø - 30ø down, -- Overhead pneumatic holddown and tilting fence line;

Alpha Brush KS-LS Sander

1999 F 92 CE Altendorf 3200 Slid Table Saw S/N 99-11-802 220 Volt

ALTENDORF F-45 Sliding Table Saw Specifications: -- 10-1/2' (3,200 mm) Carriage travel, 14" blade cap. with scoring, max. 16" main blade without scoring, 4-1/8" depth of cut with 14" blade, 45° tilting arbor, 15 mm (9/16") dado cap.; 7.5 HP main motor, 1 HP scoring motor with 9,000 RPM blade speed. Features: -- Manual raise-and-lower via foot pedal; manual tilt of saw group via hand-wheel; 49" rip cut cap. Complete with: -- Overhead blade guard w/dust collector outlet; sliding table lock mechanism. -- 800 x 700 mm main table extension, 2,100 mm long extendible crosscut fence with (2) flip-stops.

ALTENDORF F-45 Sliding Table Saw Specifications: -- 10-1/2' (3,200 mm) Carriage travel, 14" blade cap. with scoring, max. 16" main blade without scoring, 4-1/8" depth of cut with 14" blade, 45° tilting arbor, 15 mm (9/16") dado cap.; 7.5 HP main motor, 1 HP scoring motor with 9,000 RPM blade speed. -- Features: -- Manual raise-and-lower via foot pedal; manual tilt of saw group via hand-wheel; 49" rip cut cap. Complete with: -- Overhead blade guard w/dust collector outlet; sliding table lock mechanism; -- 800 x 700 mm main table extension, 2,100 mm long extendible crosscut fence with (2) flip-stops.