Woodworking Equipment For Sale
1686 Results Found
$ 169,900
WEINIG UNIMAT 818 S Feed Through Moulder 6-Head (B-R-L-T-T-B), working dimension 12-3/16" x 6- 5/16".Capacity: -- Working width 3/4" - 12-3/16" -- Working thickness 5/16" - 6-5/16" -- feed speed-variable with 10 HP inverter 20 - 200 FPM Head sequence: -- Bottom 25 HP, right 15 HP, left 15 HP, top 30 HP, top 30 HP, and bottom 30 HP motor; all motors with electronic spindle brakes. -- Spindle dia. 1-13/16" with cutter head speed of 6,000 RPM; -- outboard bearings on spindles #1, #4, #5 & #6. Electronic LED digital readouts for all spindlesJointer: -- Head # 1 Bottom straight jointer manual, remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 12 -1/16"; With outboard bearing 4 3/4"; For tool circle 6 1/16"- 7-1/16" -- Head # 2 Right spindle Profile jointer automatic; For working height 4-3/4"; Remotely controllable with closed safety hood; Automatic stone adjustment -- Head # 3 Left spindle Profile jointer automatic; For working height 4-3/4"; Remotely controllable with closed safety hood; Automatic stone adjustment -- Head # 4 Top spindle straight jointer manual; remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 12 1/16"; With outboard bearing 4-3/4"; For tool circle 6-1/16"- 7-1/16"Profile Jointer automatic; Remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 9-1/16" without outboard bearing 4-3/4" -- Head # 5 Bottom spindle straight jointer manual; remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 12-1/16"; With outboard bearing 4-3/4"; For tool circle 6 1/16"- 7-1/16"Profile Jointer automatic; Remotely controllable with closed safety hood; Automatic stone adjustment; Maximum jointing width 9-1/16" without outboard bearing 4-3/4" -- (4) Jointer cassettes for profile jointer, length 6" -- (2) Jointer cassettes for profile jointer, length 9" -- (1) Set of jointing stoneReadouts: -- Digiset (double mechanical readouts) for left and top radial adjustments. One readout is for the tool size and the other for the finished wood dimension (with Imperial inch adjustment -- Mechanical readouts on all other axes. Side pressure roller: -- (10) Driven feed roller shaft from above -- (5) Driven steel rollers in the machine table -- Axial setting range of the feed rollers opposite left spindle, 1-3/8" -- Extension of the feed shaft opposite the left spindle to 8 -1/4 in. -- Axial setting range of vertical spindle 3-1/8 in. Axial setting range of horizontal spindle 1 -3/4 in. (1st bottom 3/8 in.) -- All spindles diameter 1 -13/16" -- (6) Additional set of spacing collars, clamping length 6-11/16", diameter 1-13/16" -- Pressure shoe in front of 1st left spindle receding from tool, incl. lateral roller pressure, pneumatic -- Receding chip breaker in front of 1st top spindle, pneumatic. -- Pressure shoe in front of and guide after top spindle with mechanical digital displays
$ 11,800
WEINIG PROFIMAT 23 Feed Through Moulder;(6)-Heads (B-R-L-T-T-B), working cap. 9-1/16" x 4-11/16".Specifications: -- Spindles 1-1/2" dia. with cutterhead speed of 6,000 RPM. -- Feed System & Features: variable feed speed from 20 - 78 FPM, powered by a 5.5 HP motor. -- Receding chip breaker at top spindles. Side pressure opposite right spindle; spring-loaded with (2) rollers; driven outfeed roller in bed. -- In-feed straightening table 2 M (78"), side pressure roller mounted to in-feed table. Note: Bare Machine: No dust manifold or tooling.
Call for Price
Weinig Powermat 1000 Moulder - 8,000 rpm machine out of production 2/2024. Converted from 12,000 RPM. - Working cap.: 9-1/16” x 4-3/4” - Motors: B-15 HP, R-15 HP, L-15 HP, T-30 HP, T- 40 HP and B-30 HP. - Spindles/Tool Holders: Spindle 1-13/16" at 8,000 RPM; HSK tool holders 2-6 8,000 RPM. Motorized tool positioning for tools 2-6 Radial and Axial. - CNC: WEINIG Power Com "Touch Screen” PLUS software with tool data storage 300 profiles, profile data and tool monitoring. Led readouts to all spindles/tool holders; including chipbreaker’s and holddown’s. Modem for external diagnostics. - Feed: Variable inverter drive speed with 7.5 HP motor with speeds from 18-118 FPM. - Infeed/Tables: 2M (6'-6”) infeed table with side pressure roller, AUTO table lubrication and chromed tables and fences.
Call for Price
Call for Price
2002 Weinig U23E 5-Head Moulder 2021 Doucet MFE-150-12 Infeed System This system is still in production and ready to be loaded out.
Call for Price
Manufacturers Specifications tool diameter: 100 - 300 mm tool width: max. approx. 230 mm motor / grinding disc drive: approx. 1,1 kW free angle, adjustable 15 - 35° drive for coolant pump: approx. 0,065 kW tank capacity: approx. 90 l
Call for Price
Call for Price
Weinig Powermat 400 Moulder HSK heads Radial and axial head controls Still under power and available for inspection.
WEINIG Unimat 500 Classic Feed Through Moulder5-Heads, working capacity 230 x 120 mm (9-1/16" x 4-3/4"). -- Head Sequence: Bottom 4 kW (5.5HP), right & left 4 kW (5.5 HP), top 5.5 kW (7.5 HP), top 5.5 kW (7.5 HP), and bottom 4 kW (5.5 HP) motor. -- Spindles: Dia. 40 mm (1-9/16")with cutter head speed of 6,000 RPM;digital readouts on spindle adjustments in combination with the WEINIG MEMORY SYSTEM. Motorized height & width adjustment of spindles. Tool diameter 1st spindle min/max 125-145 mm (4-15/16" - 5-11/16"), other heads 112-200 mm (4-7/16" - 7-7/8"). -- WEINIG Powerlocktool holding system on top heads. -- Motorized feed beam adjustment with independent adjustment of top heads, receding chip breakers on left and top heads. --Variable feed speed 5 to 30 m/Min (16-98 FPM), driven by 5 kW (7.5 HP) motor. Overhead feed wheels with pneumatic pressure. Cardan drive. -- MachineTables: Made of hardened steel. Infeed straightening table is 2,000mm (6.5') with adjustable fence & adjustable outfeed table; (1) side pressure roller mounted to infeed table. -- Complete with: WEINIG MEMORY SYSTEM-reduces set-up time by storing spindle positions and tool radii, Full sound/safety enclosure with illumination inside, Central lubrication with manual lubrication pump, Automatic star delta starters, CE Compliance, and (2) Emergency stop buttons.
Call for Price
Weinig Powermat 1000 Year: 2006 Condition: very good, taken out of service in April 2024, operating at full production at that time. Several wear parts have been replaced in the last year and service by Weinig technicians. Sale includes $29,000 of new parts not yet installed. Machine information: 6-Head with HSK spindles (B,R,L,T,T,B) 12,000 RPM Capacity: 9-1/16" x 4.75" Weinig PowerCom touch screen control Feed: 62 FPM
$ 16,250
WEINIG/MARK DUNIGAN DESIGN COMPANY ELCF-12 2-1/2' x 12' Lateral Chain Moulder FeederSpecifications: -- Deck width 12'.Equipped with: -- (8) 2-1/2"; W x 2-1/2' L x 33-3/4"; H Stainless steel feed chains, with 3 HP - 1,760 RPM TEFC Motor. -- (2) Top coated feed rolls, with Variable feed speeds. -- (5) Manually-adjustable hold-down plates. -- Control, with LCD Feed rate display, & TELEMECANIQUE "SR B201FU" Sequence controller with LCD Display.
$ 50,000
Hyd. hi-speed horizontal ripping, planing or moulding w/feed speed up to 330 FPM, 5 heads installed (originally 7-head), Standard 9" width. Auto Waxilit bed oiler. Includes feed rolls. tooling, spare parts, & hydraulics & dust collection manifold, Well- maintained, still used daily ! Come check it out prior to 8/26. More equipment coming up for grabs soon. Available by Sept. 2024 570 758 2597
$ 42,500
WEINIG POWERMAT 1000 6-Head Feed Through MoulderSpecifications: -- B-R-L-T-T-B. -- Working cap. 230 x 160 mm (9.05" x 6.30"). -- Variable feed speeds 5 - 30 MPM (16 - 98 FPM).Equipped with: -- Head Sequence: Bottom 25 HP, Right 20 HP, Left 20 HP, Top 50 HP, Top 50 HP, & Bottom 50 HP Motors, with Electronic "SMART" Brakes. -- Heads #1 - #6, with "PowerLock" Toolholders, Spindle speed 8,000 RPM, High precision bearings, & LCD readouts for all toolholder settings, including chipbreakers & pressure elements. -- Heads #2 & #3, with Axial adjustment 2-3/16" & Adjustable table plates to cutting circles. -- Heads #2 - #6, with Radial & Axial Motorized tool positioning. -- Heads #4 & #5, with Radial adjustment & Split pressure shoes, Independant chipbreaker adjustment & Pressure element. -- Head #3 Chipbreaker with Pressure shoe from above & laterally. -- Head #5, with Motorized feed beam adjustment with independent adjustment. -- Overhead feed wheels, with Pneumatic pressure. -- Cardan drive, with 15 HP Motor & Inverter. -- Hardened infeed bed plates before & after Head #1. -- Extension of pendulum shaft opposite Head #3, extended to 150 mm (5.91"). -- (2) Powered rollers in table, (1) between Heads #4 & #5 & (1) after Head #6. -- 1.5 M (59.06") Infeed straightening table, with fence. -- Central lubrication. -- Automatic bed lubrication pump. -- Full sound/safety enclosure. -- WEINIG "PowerCom" Touchscreen controls, with: Profile drawing storage, Profile dimensions, Tool changes, & Production optimization.Complete with: -- Accessories & Tooling (As pictured).
Call for Price
Weinig Powermat 700 Moulder Measuring stand, tooling and spare parts as pictured Never connected to power...ready to load!
Call for Price
Call for Price
Weinig Unimat Gold - 6-Head Machine Weinig Rondamat R960 Grinder Includes: Tooling and approx (200) profiles from tool room
Call for Price
This entire listing is being sold as one lot. 1997 Weinig U23EL 6-Head Moulder with infeed and outfeed decks 2000 Weinig R960 profile Grinder with Weinig 970080 Opticontrol Stand TF-900 Resaw Precision 281 chop saw Precision 281 RH chop saw Shanklin F2 wrapper Damark STR 16ADD heat tunnel Ogam 280 Rip Saw
$ 23,995
Call for Price
$ 31,900
WENIG PROFIMAT 23E Feed Through Moulder5-Head (B-R-L-T-B), working cap. 9-1/16" x 4-11/16".Specifications: -- Spindle Sequence: Bottom 10 HP, Right & Left by 15 HP, Top 15 HP and Bottom 10 HP motor. -- Spindles: 1-1/2" diameter. with cutterhead speed of 6000 RPM. -- Digital Readouts: "DigiSet" digital readouts for chipbreaker and pressure element at top spindle -- FPM: Variable feed speed from 17 - 78 FPM, powered by a 4 HP motor -- Safety: Full enclosure sound proof booth -- Receding chipbreaker & pressure element at top spindle -- Rollers: Side pressure opposite right spindle, spring loaded with 2 rollers and driven outfeed roller in bed. -- Infeed straightening table 2 meter (6'6") -- Features central lubrication system via manual table lubrication pump. -- Machine is wired for 460 Voltage / 3 Phase Power using 79 Full Load Amps. -- Includes - All heads, rollers, setup tools shown are included, Owner's Manual, and 4-hose Dust manifold.This machine runs perfectly, is in Good Condition- with some dents to the outer sound enclosure. Overall Dimensions: 132"; x 64"; x 64";Approx. 8,000LBSRemoval is responsibility of buyer. Seller can build a crate, and put it on a truck for an additional $1,000.00