Weinig Knife Grinder For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 1
9 Results Found
Sort By 
STANDARD LISTINGS
2004 Weinig R 960  Knife Grinder
$26,500

WEINIG RONDAMAT R960 Powerlock Profile Tool Grinder -- Working dimensions 9-3/8" max. cutterhead length, tool dia. 3-15/16" to 11-13/16". --Specifications -- Motor: Inverter controled grinding wheel speed of 1,500 - 3,000 RPM with 1.5 HP motor. -- Productivity package: Machine light, back clearance angle motorized; grinding wheel advance motorized; setting of side clearance angle pneumatically. -- Tool carriage movement with precision linear table bearings, setting gauges for axial constant. tilting head assembly with radial (back) clearance angle 10° - 30° --Axial (side) clearance angle 0° - 20°. --Onboard diamond wheel dressing, 8-7/8" max. 6" min. grinding wheel diameter. 13-gal. coolant tank with 1.2 HP pump. --Equipped with & Features Includes: --All manuals and setup tools; (1) HSK arbor for conventional heads. --Grinder has the Locking bracket & Jack springs for transport --Reconditioned: The carriage bearings have been replaced, The spindles bearing has not been replaced, not necessary as per the Weinig Tech

Juergen Schumacher
800-374-5009 ext:307
Call

1979 Weinig R 930 L  Knife Grinder
$1,850

WEINIG R930 L 1-13/16" 1-13/16" cutter head arbor diameter 12" Width cap - for up to 12" cutter heads -- Uses 225mm dia grinding wheels, 60mm center bore 20° max. side relief angle, 10° - 30° back clearance. -- 1.5 HP V-Belt drive, step pulley with (4) spindle speeds of 1,720 - 2,000 - 2,500 & 2,820 spindle RPM; on-board diamond wheel dresser, 26-gal. reservoir, pump, and hoses for coolant.

Juergen Schumacher
800-374-5009 ext:307
Call

2001 Weinig R 960  Knife Grinder
$23,700

WEINIG RONDAMAT 960 Profile And Straight Knife Grinder with Automatic Mode for profile knives, Variable Frequency Controlled Drive spindle speed- 1000-3000 RPM (increments of 100) Drive Motor: 1.5 HP --Template Carrier: Utilizes a template- stylus-copy system, whereby the tool head table copying-grinding is effortless (precision linear floating table movement feels smooth as if there is zero gravity). Resistance template cross support with setting gauges for axial constant system; axial side clearance angle 1-20 degrees. Holder for fixed and revolving tracing pins; for easy follow of template to grinding aggregate. Motorized positioning of grinding wheel angles. --Technical Details: Pneumatic Connection: uses approx.. 10 liters per hour, Coolant tank: approx. 50 l (13 gallons), Pump motor power at 50 Hz / 60 Hz- 0.18 kW / 0.25 kW, -- Grinding diameter: min. / max. 150 mm / 225 mm (5.9 in/ 8.9 in) Planning Heads 150 mm (5.9 in), Width: 5 mm (.2" ), Ceramic, for profile cutterheads: 2 mm; 4 mm (.8 in; .157 in), Ceramics, for planing heads: 10 mm (.394 in), Grinding Wheel Bore: 60 mm (2.362 in), Power Drive motor: 1.1 kW (1.5 HP), Clearance angle: Back clearance angle for profile knives min/max: 10 ° / 30 °, Heads planers: 10 ° - 30 °, Side clearance angle for profile cutter heads manually: 0 ° - 20 ° ÷Semi: 0 ° - 10 °, Heads planers: 60 ° -- Note: 2 9 1/2" spindles that go with this machine, one 1 13/16th spindle and 2 1/8th spindle

Juergen Schumacher
800-374-5009 ext:307
Call

1998 Weinig R 934  Knife Grinder
$10,450

WEINIG R 934 Profile Knife GrinderSpecifications: -- 9-3/8" Maximum arbor length, 4" - 9" Tool diameter. -- 6" - 8-7/8" Grinding wheel diameter, Grinding wheel speed inverter controlled with Grinding wheel speeds 1,500 to 3,000 RPM, 1.1 kW (1-1/2 HP) Motor.Equipped with: -- Hydro-clamping of grinding wheel to arbor. -- Tool carriage movement with Precision linear table bearings, Setting gauges for axial constant, Axial (side) clearance angle 0° - 20°. -- Onboard diamond wheel dressing, 13 Gallon Coolant tank with 1.2 HP Pump.Dimensions: 50" x 43" x 60" HWeight: 1,500 Lbs.

Juergen Schumacher
800-374-5009 ext:307
Call

Weinig R 925  Knife Grinder
$4,250

WEINIG RONDAMAT 925 GrinderSpecifications: -- 9 -1/2" Arbor length, 4" - 9" max. tool dia., 6" - 8-7/8" max. wheel dia., 1.5 HP motor; -- (4) Grinding wheel speeds of 1,700 - 2,000 - 2,250 & 2,800 RPM. -- Clearance angle for back relief from 15° - 35°, axial from 0° - 10°; axial constant system. -- Complete with water bath table, 24-gallon coolant tank system with 0.09 HP pump, and 1-1/2" grinding arbor.abor, nut missing m 12 1-75 -- Electric system approx. 1.5 kW

Juergen Schumacher
800-374-5009 ext:307
Call

2006 Weinig R 960 PWLK  Knife Grinder
$22,500

WEINIG RONDAMAT R960 Powerlock (HSK) Profile Tool Grinder Working dimensions 9-3/8" max. cutterhead length, tool dia. 3-15/16" to 11-13/16". Specifications: -- Inverter controled grinding wheel speed of 1,500 - 3,000 RPM with 1.5 HP motor. -- Productivity package: Machine light, back clearance angle motorized; grinding wheel advance motorized; setting of side clearance angle pneumatically. -- Tool carriage movement with precision linear table bearings, setting gauges for axial constant. tilting head assembly with radial (back) clearance angle 10° - 30°. -- Axial (side) clearance angle 0° - 20°. -- Onboard diamond wheel dressing, 8-7/8" max. 6" min. grinding wheel diameter; 13-gal. coolant tank with 1.2 HP pump.Equipped with & Features: -- All manuals and setup tools; (1) HSK arbor for conventional heads. -- Grinder has the Locking bracket & Jack springs for transport. -- Reconditioned: The carriage bearings have been replaced, however the spindle bearing has not been replaced, not necessary as per the Weinig Tech.

Juergen Schumacher
800-374-5009 ext:307
Call

1980 Weinig R 930  Knife Grinder
$1,300

WEINIG RONDAMAT 930 L Profile GrinderSpecifications: -- 8-55/64" Maximum arbor length, 11-27/64" Maximum tool diameter. -- 13/64" Grinding wheel width, 2-23/64" Grinding wheel bore. -- 10 - 30° Radial clearance angle on back, 0 - 20° Axial clearance angle to both sides, Spindle speeds 1,720, 2,000, 2,500 & 2,820 RPM.Equipped with: -- Onboard wheel dresser with 1-1/2 HP Motor, 20 Gallon Coolant tank with 1/3 HP Pump.Dimensions: 54" L x 54" W x 66" H.Weight: 1,760 Lbs.

Juergen Schumacher
800-374-5009 ext:307
Call

2000 Weinig R 950  Knife Grinder
$9,900

WEINIG RONDAMAT R 950 Profile Grinder; Working dimensions 9-1/2" Max. arbor length, tool cutting circle 4" min., 9" maximum.Specifications: -- Tool carriage movement with linear table bearings, setting gauges for axial-constant. -- Radial (back) clearance angle 15° - 35°, axial (side) clearance angle 0° - 10°. -- Drive motor 1.5 HP, Grinding wheel diameter: 5-7/8" to 8-7/8", -- Grinding spindle; speeds via ribbed belt adjustment: 1,500, 1,700, 2,400 and 3,000 RPM.,manual clamping of grinding wheel to spindle. -- Coolant tank capacity: 10 gallons. -- Includes: 1-1/2" arbor , (1) grinding wheel flange,

Juergen Schumacher
800-374-5009 ext:307
Call

1994 Weinig R 912  Knife Grinder
$8,500

WEINIG R 912 Automatic Profile & Straight Knife GrinderFor Straight knives, Mill-to-pattern & Finger joint heads, ground in cutterhead.Specifications: -- Grinding wheel size 5" x 20 mm (.79"), Spindle speed 4,600 RPM. -- Clearance angle at radial knife back 15 - 35°. -- Cutting circle 4" to 12" with 10-1/4" Working length.Equipped with: -- 2 HP Spindle motor. -- Solid spindle carrier with precise guides for concentricity below 0.0002". -- 1.2 HP Coolant pump with 14 Gallon Tank. -- Indexing plates for 1 - 36 Knives.Complete with: -- 50 mm (1.97") & 40 mm (1.57") Arbors for Finger joint knives.

Juergen Schumacher
800-374-5009 ext:307
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved