Woodworking Equipment For Sale

Wadkin GA 5363 5 Head Moulder

WADKIN "GA-220" 5-Head Feed Through MoulderSpecifications: -- 5-Head, with 8-5/8" x 4-5/8" cutting capacity (220 mm x 120 mm) -- 40 mm Spindle diameter with cutterhead speed of 6,000 RPM. -- Head sequence: Bottom 10 HP, Right 7-1/2 HP, Left 7-1/2 HP, Top 15 HP, Bottom 10 HP motor. -- 2 HP variable feed speed 19 to 72 FPM, chain drive. -- Currently wired for 460 Volt, 3-Phase power.

WADKIN GD 220 6-Head Feed Through MoulderSpecifications: -- Working capacity: 230 mm W x 130mm H (9.06" W x 5.12" H) Timber admitted, 220 mm W x 120 mm H (8.66" W x 4.72" H) Finished timber. -- Head Sequence: Bottom 7-1/2 HP, Right 7-1/2 HP, Left 7-1/2 HP, Top 15 HP, Bottom 10 HP, & Universal 7-1/2 HP. -- Spindle dia. 40 mm (1.57"), Spindle speed 6,000 RPM. -- Variable feed speeds 6 - 22 MPM (20 - 72 FPM).Equipped with: -- Right, Left & Top heads with Mechanical digital readouts. -- 1/2 HP Motorized feed beam, 2.2 kW Feed motor, 3 HP Cardan drive, Reverse feed, 5-1/2" Dia. Hardened & Chromed steel feed rollers up to top head, 2" x 2" Polyurethane feed rollers after top head, All feed & pressure rollers move with rise & fall of feed beam. -- 2 M (78.74") L Infeed straightening table. -- Manual bed lubrication. -- Sound enclosure.

Model GD-220-5 220 volt three phase, 60 hz, 67 amps Max workpiece admitted 230 mm x 130 mm (9" x 5") Max workpiece finished size 220 mm x 120 mm (8.66" x 4.72") 10-1/2" wide x 77" long adjustable height infeed table 1" high adjustable infeed fence 40mm Spindle dia. - 1st head: bottom horizontal spindle 7-1/2 hp, 208-230/460 volt three phase drive motor - 2nd head: right hand vertical spindle 7-1/2 hp, 208-230/460 volt three phase drive motor - 3rd head: left hand vertical spindle 7-1/2 hp, 208-230/460 volt three phase drive motor - 4th head: top horizontal spindle 15 hp, 208-230/460 volt three phase drive motor - 5th head: bottom horizontal spindle 10 hp, 208-230/460 volt three phase drive motor cardan feedworks Mechanical digital readouts on chip breaker and axial adjustments Sound and safety enclosure with lift up hood around all heads Interior cabin work light 3 hp, 208-230/460 volt three phase feedworks drive motor Variable speed feed with 20 to 75 ft/min range Push button motor controls

Manufacturer’s Specs Model GD-220-5 220 volt three phase, 60 hz, 67 amps Max workpiece admitted 230 mm x 130 mm (9" x 5") Max workpiece finished size 220 mm x 120 mm (8.66" x 4.72") 10-1/2" wide x 77" long adjustable height infeed table 1" high adjustable infeed fence 40mm Spindle dia. - 1st head: bottom horizontal spindle 7-1/2 hp, [208-230/460](tel:208-230/460) volt three phase drive motor - 2nd head: right hand vertical spindle 7-1/2 hp, [208-230/460](tel:208-230/460) volt three phase drive motor - 3rd head: left hand vertical spindle 7-1/2 hp, [208-230/460](tel:208-230/460)volt three phase drive motor - 4th head: top horizontal spindle 15 hp, [208-230/460](tel:208-230/460) volt three phase drive motor - 5th head: bottom horizontal spindle 10 hp, [208-230/460](tel:208-230/460) volt three phase drive motor cardan feedworks Mechanical digital readouts on chip breaker and axial adjustments Sound and safety enclosure with lift up hood around all heads Interior cabin work light 3 hp, [208-230/460](tel:208-230/460) volt three phase feedworks drive motor Variable speed feed with 20 to 75 ft/min range Push button motor controls

Great Condition 500 RPM Spindle speed 8 Head with jointers 1-13/16" Spindle Diameter, Belt Driven 2 bottom cutter heads with jointers-15HP/15HP 2 top cutter heads with jointers--20 HP/15HP 2 right hand cutter heads with jointers--10HP/10HP 1 left hand cutter head with jointer--10HP 1 universal cutter head--10HP

Wadkin 5 hd Moulder, 480v, 9in W Capacity

Manufacturer NV300 - With bilateral linear action providing profiling and straight knife grinding up to a max of 310 mm. Will shape and regrind moulder knives in the block and profile grind solid tipped heads. Suitable for HSS, Stellite and TCT. Max length of cutter profile 310 mm. Max dia of cutting circle 300 mm. Includes arbor, grinding wheel, stylus, 220 volt 3-phase

Six Wadkin moulders available. Have not been run in a few years. Selling all as one package. - (4) 4-Head machines - (2) 6-Head machines

Weeke Optimat BHP008/Vantech 480 480 v This machine will be ready to move around November 10, 2022.

WEEKE VENTURE 05S CNC MACHINING CENTER: -- Specifications: Working Field "X" Axis is 2,510 mm (98.8"); "Y" axis is 1,250 mm (49.2"); "Z" axis stroke is 125 mm (4.9"); max. material thickness 85 mm (3.3"). -- Positioning Speed:"X" Axis 262 FPM (80 MPM); "Y" axis 262 FPM (80 MPM); "Z" axis 66 FPM (20 MPM); head travels on THK linear motion guides on all axes. -- Worktable:(6) Adjustable K-Table tubeless support rails with (2) vacuum pods per rail.(6) Pneumatic backstops; (6) pneumatic front stops; (2) pneumatic side stops; (2) working zones. -- Boring Unit:3.6 HP (2.7 kW) Motor; programmable variable speed 1,500 - 7,500 RPM; (8) independent Vertical drill spindles, (4) spindles in "X" axis & (4) in "Y" axis;(6) Horizontal spindles with (2 + 2) in "X" axis & (1 + 1) in "Y" axis; (1) "X" axis grooving saw with a 100 mm dia. saw blade. -- Machining:(1) 8 HP (6 kW) Electro spindle router with ETP 25 "Hydro-Chuck" QC adaptor, powered by a frequency inverter w/programmable 1,250 - 18,000 RPM; RH/LH rotation. -- Operator & Machine Control:WEEKE PC 85T "POWER CONTROL" + Windows "XP" + WoodWOP 5.0 Operating System; BECKHOFF PLC for (3) axes with linear, circular & helical interpolation.15" TFT monitor, industrial keyboard for data entry, CD R/W & floppy drive; 40 GB hard drive; modem, USB slot, RS-232 serial interface for possible simple PC connection; all mounted in separate free-standing Control Panel. -- Complete with:(1) 100 cbm/Hr Vacuum Pump, Scrap Conveyor, Handheld Pendant & Safety Fences. -- Actual Model is WEEKE - VENTURE 05S.

WEEKE VENTURE 106M (BMG 111) CNC MACHINING CENTER (W/ATC/BORING): -- Specifications: Working Capacity: "X" Axis is 123.2" (3,130 mm); "Y" axis is 61.2" (1,554 mm); "Z" axis stroke is 7.2" (185 mm); max. material thickness 4" (100 mm). -- Positioning Speed: "X" & "Y" Axis travel speed of 262 FPM (80 MPM); "Z" axis travel speed of 66 FPM (20 MPM).The machine head travels on THK linear motion guides on all axes. -- Worktable:(6) Movable K-Table support rails w/side mounted raise-and-lower panel feeding rails; (2) vacuum pods per rail.(6) Pneumatic backstops; (2) pneumatic side stops create (2) working zones.Laser Positing System setup assistance for precise rail & vacuum pod positioning. -- Boring Unit:3 HP (2.3 kW) Motor; variable speed from 1,500 - 7,500 RPM; (12) vertical "QUICK-CHANGE" drill spindles: (7) Spindles in "X" axis & (5) in "Y" axis.(6) Horizontal spindles with: (2 + 2) in "X" axis & (1 + 1) in "Y" axis. -- Machining: (1) 10/12 HP (7.5/9 kW) Air-Cooled electro-spindle router with: HSK F63 Adaptor w/programmable 1,250 - 24,000 RPM; constant torque from 9,000 - 24,000 RPM; RH or LH rotation; powered by a frequency inverter.(1) 8-Position ATC magazine located at the RH side of the machine. -- Operator & Machine Control: WEEKE IPC "PC 85 Power Control" + Windows "XP" + WoodWOP 6.1 Operating System; INTEL Core2 Duo Processor; "BECKOFF" PLC for (3) axes with linear, circular, & helical interpolation.17" TFT Monitor with: 2D / 3D "REAL-TIME" graphics, industrial keyboard, & mouse for data entry.1 SATA hard drive, 160 GB; central USB front side bus connection, Ethernet connection 10/100 Mbit. All mounted in separate free-standing Control Panel. -- Complete with:(1) 84 M³/Hr Vacuum Pump, 3-zone safety mats (will stop machine if operator enters the active work area), safety fences, scrap conveyor, handheld pendant controller. -- Actual Model is: WEEKE VENTURE 106M / BMG 111.

Weeke BHC 550 CNC Router S/N 0-250-13-0781 Out and ready to Load.

Weeke Vantech 480 CNC Router 4x8 Table

WEEKE VENTURE 106M (BMG 111) CNC MACHINING CENTER (W/ATC/BORING): -- Specifications: Working Capacity: "X" Axis is 123.2" (3,130 mm); "Y" axis is 61.2" (1,554 mm); "Z" axis stroke is 7.2" (185 mm); max. material thickness 5.9" (150 mm). -- Positioning Speed: "X" & "Y" Axis travel speed of 262 FPM (80 MPM); "Z" axis travel speed of 66 FPM (20 MPM).The machine head travels on THK linear motion guides on all axes. -- Worktable:(6) Movable K-Table support rails w/side mounted raise-and-lower panel feeding rails; (2) vacuum pods per rail.(6) Pneumatic backstops; (2) pneumatic side stops create (2) working zones.Laser Positing System setup assistance for precise rail & vacuum pod positioning. -- Boring Unit:3 HP (2.3 kW) Motor; variable speed from 1,500 - 7,500 RPM; (12) vertical "QUICK-CHANGE" drill spindles: (7) Spindles in "X" axis & (5) in "Y" axis.(6) Horizontal spindles with: (2 + 2) in "X" axis & (1 + 1) in "Y" axis. -- Machining: (1) 12 HP (9 kW) Air-Cooled electro-spindle router with: HSK F63 Adaptor w/programmable 1,250 - 24,000 RPM; constant torque from 9,000 - 24,000 RPM; RH or LH rotation; powered by a frequency inverter.(1) 8-Position ATC magazine located at the RH side of the machine. -- Operator & Machine Control: WEEKE IPC "PC 85 Power Control" + Windows "XP" + WoodWOP 6.1 Operating System; INTEL Core2 Duo Processor; "BECKOFF" PLC for (3) axes with linear, circular, & helical interpolation.17" TFT Monitor with: 2D / 3D "REAL-TIME" graphics, industrial keyboard, & mouse for data entry.1 SATA hard drive, 160 GB; central USB front side bus connection, Ethernet connection 10/100 Mbit. All mounted in separate free-standing Control Panel. -- Complete with:(1) 84 M³/Hr Vacuum Pump, 3-zone safety mats (will stop machine if operator enters the active work area), safety fences, scrap conveyor, handheld pendant controller. -- Actual Model is: WEEKE VENTURE 106M / BMG 111.

WEEKE VENTURE 2.5 CNC MACHINING CENTER (W/ATC/BORING): -- Specifications: Working Field "X" Axis is 3,250 mm (128"); "Y" axis is 1,250 mm (49.2"); "Z" axis stroke is 125 mm (4.9"); max. material thickness 100 mm (3.9"). -- Positioning Speed:"X" & "Y" Axis 328 FPM (100 MPM), "Y" axis 262 FPM (80 MPM), "Z" axis 66 FPM (20 MPM); head travels on THK linear motion guides on all axes. -- Worktable:(6) Adjustable K-Table tubeless support rails with (2) vacuum pods per rail.(6) Pneumatic backstops, (6) pneumatic front stops, (2) pneumatic side stops; (2) working zones. -- Boring Unit:3.6 HP (2.7 kW) motor; programmable variable speed 1,500 - 7,500 RPM; (12) independent "Quick Change" Vertical drill spindles: (8) spindles in "X" axis & (4) in "Y" axis.(6) Horizontal spindles with (2 + 2) in "X" axis & (1 + 1) in "Y" axis.(1) 0° - 90° NC Controlled "C" Axis Grooving Saw for 360° Horizontal Processing; 100 mm max. dia. saw blade. -- Machining:(1) 9 HP (6.7 kW) Electrospindle router with: HSK F-63 Adaptor, powered by a frequency inverter w/programmable 1,250 - 18,000 RPM, RH/LH rotation.(1) 7-Position ATC Tool Plate mounted on the machine head for "on the fly" ATC. -- Operator & Machine Control:WEEKE PC 85T "POWER CONTROL" + Windows "XP" + WoodWOP 5.0 Operating System; BECKHOFF PLC for (3) axes with linear, circular, & helical interpolation.15" TFT monitor, industrial keyboard for data entry, CD R/W & floppy drive, 40 GB hard drive, modem, USB slot, RS-232 serial interface for possible simple PC connection; all mounted in separate freestanding Control Panel. -- Complete with: (1) 100 CBM/Hr Vacuum Pump, scrap conveyor, handheld pendant & safety fences. -- Actual Model is WEEKE VENTURE 2.5

Weeke Vantech 480 CNC Router Infeed Table Push off table 4'x8' Table

2015 Delivered in 2016 Weeke Vantech 510 CNC Router 13 HP HSK 63F Spindle with air blast nozzles 8 Position Rack Style ATC 7 Spindle Boring Block 5x10 Table Part location pins (2) Becker 7 HP vacuum pumps Woodwop Light Barrier safety system

Weeke BHP008 Vantech 512 CNC Router Includes: (4) Vacuum Pumps Approx 200 hours on the machine

Weeke ABD 050