• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
8 Results Found for Moulder Viewing 1 - 8 of 8 results
RECENTLY ADDED
STANDARD LISTINGS
SCM SUPERSET 23 XL Feed Through Moulder and TOOLSET 16 Profile Grinder; 5-Head (B-R-L-T-B), working cap. 9-1/16" x 4-3/4". -- Head sequence: Bottom 12 HP, right 9 HP, left 9 HP, top 18 HP and bottom 12 HP motor. Includes spindle brakes. -- Spindle: Dia. 1-13/16" with cutterhead speed at 6,000 RPM. SCMI RAPID "Set Up" setting system for left and top vertical heads to accommodate width and height tool measurements. All spindles with mechanical digital readouts for height and width adjustments. Digital readout for chipbreaker and pressure element top spindle. -- Feed: Variable feed drive 4 HP with feed speed from 16 - 87 FPM. -- Tables: Infeed 2 M (6'6") with manual table lubrication pump. Central lubrication. Side pressure roller mounted to infeed table. Lighted safety enclosure. -- Includes: TOOLSET 16 Profile Grinder and (1) set of used heads.
Equipment Location:GREAT PLAINS
Bob Dykstra
800-374-5009 ext:378
SCMI SUPERSET 23 Moulder Feed Through -- 5-Head (B-R-L-T-B), working dimensions 9-1/16" x 4-3/4". -- Head sequence: Bottom 12 HP, right & left spindles 12 HP, top 12 HP and bottom 12 HP motor. -- Spindles dia. 1-13/16" with cutterhead speed of 6,000 RPM. SCMI Rapid setting system for left and top spindles. Mechanical digital readouts on all other spindle adjustments with the exception of the 1st bottom head. -- Feed motor 4.8 HP, variable feed speed from 13 - 79 FPM. Infeed table 2M (6'6") Infeed straightening table. -- Includes: heads. .
Equipment Location:NORTHWEST
Bob Dykstra
800-374-5009 ext:378
SCM COMPACT 23KS Through Feed Molulder (5) HeadsHead Sequence B-R-L-T-BWidth cap. 9-1/16" x 4-15/16"Specifications: -- Bottom 9 HP, right & left share 12 HP motor, top 12 HP, bottom 9 HP -- 40 mm dia. spindles at 6,000 RPM. --Variable feed speed from 13 - 72 FPM: -- (5) serrated & (3) rubber feed rollers, powered roller on outfeed table --Simultaneous adjustment of feeding system & top horizontal spindle --Pneumatic holddown on feed groupsEquipped with & Features --Patented "Set Up" system to make change-over faster & simpler. --Forward-and-reverse jog push button --Numerical readout on all critical spindle adjustments
Equipment Location:WESTERN CDN
Bob Dykstra
800-374-5009 ext:378
SCM SUPERSET XL Feed Through Moulder; 5-Head (B-R-L-T-B), working cap. 9-1/16" x 4-3/4". -- Head sequence: Bottom 18 HP, right 12 HP, left 12 HP, top 24 HP and bottom 12 HP motor. -- Spindle diameter 1-13/16" with cutterhead speed at 8,000 RPM. All spindles with mechanical digital readouts for height and width adjustments. Digital readout for chipbreaker and pressure element top spindle. -- Electrical adjustment of feeding rollers with mechanical digital readout. -- Variable feed drive 6.6 HP with feed speed from 16 - 100 FPM. -- Infeed table 2 M (6'6") with with manual table lubrication pump.
Equipment Location:WEST COAST
Bob Dykstra
800-374-5009 ext:378
Profile grinder with new cutting edges and 2 boxes of grinding wheels, or call and make an offer.
Equipment Location:Woonsocket, SD
605-350-4272
SCM TOPSET MASTER 30 XL ... Feed Through Moulder; 6-Head (B-R-L-T-T-B), working cap. 300 x 200 mm (11-13/16" x 7-7/8"). -- Head sequence: Bottom 15 kW (20 HP), right 15 kW (20 HP), left 15 kW (20 HP), top 18 kW (25 HP ), top 15 kW (20 HP), and bottom 11 kW (15 HP) motors. -- Spindles: diameter 40 mm (1-9/16") with cutterhead speed at 6,000 RPM. All spindles with mechanical digital readouts for height and width adjustments. Digital readout for chipbreaker and pressure element top spindle. -- Feed System: ● Electrical adjustment of feeding rollers with mechanical digital readout. ● Variable feed drive 7.5kW (10 HP) with feed speeds from 6 - 36 m/min (20 - 118 FPM). ● Cardan drive. ● Infeed table 800 mm (31-1/2") with manual table lubrication pump. ● (4) Mechanical side pressure rollers at infeed / 1st bottom planing spindle. ● Equipped with SCM PHT system: Feed device to SCM Topset Master moulder. Special feed rollers in the machine infeed area, resilient, above and below (mounted within the machine table). -- Machine control system: SCM SetUp system. Quick-set-up-system on SCM moulders. Simultaneously to the setting of the tool diameter, the working height and width, the feed rollers and the pressure elements are adjusted. (see schematic drawing in the photo section of this listing).Actual model is SCM TOPSET MASTER 30 XL ... Feed Through MoulderPrice mentioned is landed US Port.
Equipment Location:MIDWEST
Bob Dykstra
800-374-5009 ext:378
SCM TOPSET MASTER 30 XL ... Feed Through Moulder; 6-Head (B-R-L-T-T-B), working cap. 305 x 200 mm (12" x 7-7/8"). -- Head sequence: Bottom 7.5 kW (10 HP), right 15 kW (20 HP), left 15 kW (20 HP), top 18 kW (25 HP ), top 18 kW (25 HP), and bottom 18 kW (25 HP) motors. -- Spindles: diameter 40 mm (1-9/16") with cutterhead speed at 6,000 RPM. All spindles with mechanical digital readouts for height and width adjustments. Digital readout for chipbreaker and pressure element top spindle. Counter bearings for horizontal spindles. -- Feed System: ● Electrical adjustment of feeding rollers with mechanical digital readout. ● Variable feed drive 5.5kW (7.5 HP) with feed speeds from 6 - 36 m/min (20 - 118 FPM). ● Cardan drive. ● Infeed table 850 mm (33-7/16") with automatic table lubrication pump. ● Mechanical side pressure roller at infeed / 1st bottom planing spindle. ● Equipped with SCM PHT system: Feed device to SCM Topset Master moulder. Special feed rollers in the machine infeed area, resilient, above and below (mounted within the machine table). ● (2) driven feed rollers in machine table. -- Machine control system: SCM CONTROL 20 PLUS - Automatic radial and axial spindle positioning system for SCM moulders. Storage of up to 200 different programs. SCM SetUp system - Quick-set-up-system on SCM moulders. Simultaneously to the setting of the tool diameter, the working height and width, the feed rollers and the pressure elements are adjusted. (see schematic drawing in the photo section of this listing). -- CE CompliantActual model is SCM TOPSET MASTER 30 XL ... Feed Through MoulderPrice mentioned is landed US Port.
Equipment Location:MIDWEST
Bob Dykstra
800-374-5009 ext:378
SCM COMPACT XL ... Feed Through Moulder; 5-Head (B-R-L-T-B), working cap. 230 x 120 mm (9-1/16" x 4-3/4"). -- Head sequence: Bottom 5.5 kW (7.5 HP), right & left shared 7.5 kW (10 HP), top 7.5 kW (10 HP ), and bottom 5.5 kW (7.5 HP) motors. -- Spindles: diameter 40 mm (1-9/16") with cutterhead speed at 6,000 RPM. All spindles with mechanical digital readouts for height and width adjustments. Digital readout for chipbreaker and pressure element top spindle. -- Feed System: ● Electrical adjustment of feeding rollers with mechanical digital readout. ● Feed rollers with pneumatic pressure. ● Variable feed drive 1.1 kW (1.5 HP) with feed speeds up to 12 m/min (39 FPM). ● Chain drive. ● Infeed table 500 mm (19-11/16") with manual table lubrication pump. ● Automatic infeed device by LINEARTECH. -- Machine control system: SCM SPV 232 system. Electronic control of the working height and width, the feed rollers and the pressure elements.Actual model is SCM COMPACT XL ... Feed Through MoulderPrice stated is landed US Port, Duty paid!
Equipment Location:MIDWEST
Bob Dykstra
800-374-5009 ext:378