You Have Selected

 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
1397 Results Found for Woodworking Viewing 1 - 20 of 1397 results
RECENTLY ADDED
PREMIUM LISTINGS
The HBR-300 features hydraulic wheel tensioning, inverter feed drive, powerful 30hp main motor, oil mist cooling system, and automatic electronic digital blade height setup. This machine is in excellent used condition and mechanically sound. Maximum material size 300 mm X 300 mm (12" x 12") Saw wheel motor: 30 hp Dust hood outlet diameter: 100 mm x 2 (4"x 2") Feeding motor: 1 hp with inverter Distance from blade to conveyor: 2-270 mm (5/64" - 10 5/8") Saw blade width: 50 mm (2") Saw blade length: 4980 mm (196") Saw blade speed: 25.4 M/s Conveyor belt size: 270 mm x 4200 mm (11" x 165") Feed speed (variable): 0-30 M/min (0-100 ft/min) Feed Conveyor Tilt: 30 Degrees Conveyor height from floor: 1016 mm (40") Saw wheel diameter: 700 mm (28") Blade lift servo motor: 0.5 hp
Equipment Location:Sterrett, AL
Smith Companies
205-620-4455 ext:111
Logosol PH260 Planer/Moulder, 4 Sided, Single Phase $6,000 570-262-4744
Equipment Location:Wapwallopen, PA
Carl Balliet Logging & Lumber
570-262-4744
Weinig Powermat 500 Moulder With Chain deck and Roller Conveyor With Automated Pusher -5 Heads -#1: 15 HP Bottom -#2 & #3: 15 HP Side Heads HSK (1 brand new Fence side head) -#4: 20 HP Top -#5: 20 HP Bottom (new spindle) -Extra Tooling -Cutter Heads -Spacers -HSK Tool Holders -Rolls -Planer Heads -Roller Conveyor with Chain Deck & Pusher Conveyor -Dimensions: 12 x 20 roller conveyor w/ pusher -Chain deck: 144” x 142” (6 plastic Chains) All units are in excellent used conditioned. Fully functioning infeed/outfeed moulder line.
Equipment Location:Sterrett, AL
Smith Companies
205-620-4455 ext:111
STANDARD LISTINGS
BUTFERING SKO 213RC2 Wide Belt Sander (2) Heads53" width cap. Drum, PlatenHead Configuration1st. Head: 30 HP Drum with steel contact roll (80-Shore). 8” diameter steel profiled contact roller; Automatic positioning of the contact roller; Grit compensation system2nd Head: Combination head with: 25 HP Electronically controlled air segmented finishing platen. The contact roll height poistion with programable control. The platen consists of 35 mm segments designe to conform to paty size to minimize sand through. 85 shore profiled contact roller; Automatic positioning of the contact roller; Grit compensation system; Electronic segmented sanding pad system; 35 mm wide segments; Variable abrasive belt speed 7 – 60 FPS; Air jet abrasive belt cleaning systemSpecifications: --Brush cleaning unit --54" x 75" abrasive belts, electronic abrasive belt tracking --Both contact rolls with grit compensation. --Variable conveyor belt feed, feed speed of 8 - 43 FPM, automatic conveyor belt tracking --3 HP feed drive; infeed & outfeed spring loaded --Rubberized holddown rolls. --1/8" - 5-1/2" Motorized thickness adjustment with LED readout --Automatic part thickness setup with indexing control.Equipped with & Features: -- Infeed panel "over-thickness" sensor --Electronic motor brakes on both sanding heads --Infeed & outfeed emergency stops, --Safety interlocks on all doors. -- Roller infeed conveyor extension and motor load meters. -- Options Include:Vacuum fan system externally mounted with quick-disconnect plug.
Equipment Location:SOUTHEAST
Joe Retzlaff
800-374-5009 ext:348
C.R. ONSRUD - 144G10, ...CNC Router, 5' x 12' with ATC:Moving gantry CNC Router with a 144" x 60" worktable in a front-to-back configuration; machined Phenolic vacuum plenum with: (3) Zones; cast iron moving gantry bridge & vertical supports. -- Equipped with: (1) 10 HP "ISO-30" Type ATC Spindle with side mounted 8-position carousel and infinitely programmable spindle speeds from 0 - 18,000 RPM. -- Drive system:Closed loop brushless AC Servo motors drive rack & pinion on both sides of the gantry and precision ball screws on the bridge & Z-axis; all axes ride on extra large THK precision contour linear guideways. -- Axis travel:X-axis 61", Y-axis 145" with the Z-axis at 11". --Upgraded Control by Power Automation:Industrial "Centroid" PC Front-End" Machine control system is compatible with virtually all CAD/CAM packages that generate standard M & G codes; built into "Roll Around" Pedestal console. -- Featuring:Simultaneous 3-axis motion, 32-bit RISC processor w/115,000 baud rate download capability; RS-232 port, inch/metric operation, and feed rate & spindle speed override. -- Complete with:25 HP QUINCY Vacuum System, assorted tool holders with collet & cover nut, and documentation.
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445
C.R. ONSRUD - 122C12, ...Twin-Table CNC Router with ATC:Twin 61" x 61" Moving tables can function independently for unload/load on one table while the other is in process or in tandem as a single 122" x 61" table. -- Each Table with:Universal type single-zone vacuum plenum for use with spoil board or pods and includes pop-up pins for panel registration . -- Equipped with:(1) COLOMBO 12 HP 4-Pole HSK spindle, variable speed to 24,000 RPM, and 12-position tool carousel. -- Closed Loop:"Brushless" AC Servo Drive System with precision ground ball screws, 3,400 IPM max. machining speed. All axes ride on extra large THK precision contour linear guideways; cast iron fixed gantry bridge and vertical supports. -- INDUSTRIAL:"AMC" Machine control system is compatible with virtually all CAD/CAM packages that generate standard M & G codes. This machine comes with a "nearly new" spindle; less than (30) working hours on it, as well as an additional ball screw that can be reworked - so that you have a spare!Machine in EX-FACTORY'S Zeeland, MI facility - Cleaned, Checked and Certified by EXF's Senior Tech! ...the "Triple CCC" Seal!X-Axis ball screw rebuilt in late 2017!NOTE: Vacuum Pump not included.
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445
C.R. ONSRUD 122C16C CNC Router with Twin Tables, ATC & C-Axis:Twin 60" x 60" Moving tables can function independently for unload/load on one table while the other is in process, or in tandem as a single 120" x 60" table, each table has a universal type single zone vacuum plenum for use with spoil board or pods. -- Equipped with:(1) 16 HP HSK-63F type ATC spindle with C-Axis 360° rotation, variable speed from 6,000 to 18,000 RPM, ceramic bearings, and 12-position tool carousel. -- Closed loop "brushless" AC Servo drive system with precision ground ball screws, 1,500 IPM max. machining speed, all axes ride on extra large THK precision contour linear guideways; cast iron fixed gantry bridge and vertical supports. -- INDUSTRIAL"AMC 4" Machine control system is compatible with virtually all CAD/CAM packages that generate standard M & G codes; built into "swivel arm" mounted console. -- Featuring: Simultaneous 3-axis motion for "full 3D" capability, 32-bit "RISC" processor w/115,000 baud download capability; RS-232 port, hand held controller, inch/metric operation, and feed rate & spindle speed override while cutting. -- Includes:Assorted tool holder, manuals and documentation. approximate footprint 199”L x 138”W x 96" HNOTE: There is no vacuum pump included.
Equipment Location:MID ATLANTIC
Norm Schust
800-374-5009 ext:445
CADORET MANUAL FINGER JOINT SYSTEM: Shaper Section includes right and left hand Shaper Units, each with AC variable speed drives from 30 to 60 FPM.Features: Shapers with hand-wheels and digital readout scales; on on the horizontal saw adjustment and one each on vertical and horizontal spindle adjustments, -- Retractable guide knives for running flooring; quick change chain lug back up blocks for end matching. -- Extended arm for running up to 16' long material; roller track for material longer than 48". -- APQUIP Glue Applicator on second Shaper. -- 20' Manual Press Section with 5/8" to 3" thickness cap; 3/4" to 8" width cap.; 36" to 240" assembled length capacity. Hydraulically driven rubber rolls and adjustable length stops. -- High efficiency motors used throughout.
Equipment Location:MIDWEST
Jeff Terrill
800-374-5009 ext:349
CALPE TH5-1600 Heavy-Duty High-Production, Fully Automatic CNC Lathe: General Description: -- Multi-Spindle cutting simultaneously, (5) spindles using V-type gouge knives. -- 63" (1,600 mm) Max. distance between centers; 5-1/2" (140 mm) max. swing diameter between spindles. -- CNC Controlled with 3.35" (85 mm) travel for depth of cut. Motors/Speeds: -- (2) Head stock motors, each 12.5 HP - 1,750 RPM; -- CNC controlled electronic variable speed of main head from 100 - 6,000 RPM. 2 HP approx hydraulic drive. -- Fast return travel of up to 590 IPM (15,000 mm/Min). -- CNC controlled feed speed carriage, variable up to 50 FPM (15 MPM). -- Loading device & tail stock powered by hydraulic pump with 2 HP - 1,750 RPM motor; No. 5 Morse taper on main spindle shaft. Features: -- Automatic loading & unloading device; carriage mounted with linear guides providing high precision movement. -- Full CNC controller with on-screen CAD programming for all products.Matching CALPE L6-1600, record number LC-010996 spindle sander is available at additional cost at same facility.
Equipment Location:NORTHEAST
Tony Cornacchione
800-374-5009 ext:432
CALPE L6-1600 Spindle Sander with Hopper Feed. -- (6) Spindles, semi-automatic sanding machine; distance between centers 63", 6-3/16" max sanding diameter, capable of sanding 1800 spindles per hour. -- 4 HP - 1,800 RPM head motor, (5) sandpaper holders, each for different grits, 4000-3200-2200-850 RPM head spindle speeds. Copier unit that follows all contours. -- Oscillating sanding units & stationary pick up of part. -- NOTE: This sander was running with lathe on our record number LC-01811 and owner prefers to sell at the same time.
Equipment Location:NORTHEAST
Tony Cornacchione
800-374-5009 ext:432
CALPE M 1200 H Hydraulic Copy Lathe -- 47-1/4" (1200 mm) Max. between centers, 4 HP main motor, (8) speeds 850-1,700-1,950-2,450-3,000-3,900-4,900-6,000 RPM; 1.5 HP hydraulic pump, variable speed carriage with tool post; 0 - 33 FPM carriage cutting speed, carriage return speed 33 FPM. -- Max. part dia. over carriage 7-3/4" (200 mm), Max. dia over bed (without copier) 13-3/4" (350 mm). -- Turning accomplished with a single gouge on hydraulic copying unit with highly-sensitive tracer working from both wooden samples and profile templates. Includes: -- Push button electric controls , and knobs/handle for hydraulic controls. One holding block for back knife (not complete), spur center on head and tail stock.
Equipment Location:EASTERN CDN
Tony Cornacchione
800-374-5009 ext:432
CAM-WOOD SM-156A Feed Through Moulder;6-Head (B-R-L-T-T-B), working cap. 6" x 4". -- Head sequence: Bottom 7.5 HP, right 5.5 HP, left 5.5 HP, top 10 top, top 7.5 HP and bottom 7.5 HP motor. -- Spindle diameter 40 mm with cutterhead speed of 6,000 RPM; spindles equipped with mechanical readouts for axial and radial adjustments. -- 4 HP Feed Motor variable speed 16- 65 FPM; carden drive system. -- 1.2 M (4'0") Infeed table with lateral side pressure roller mounted at table infeed. Manual table lubrication pump. -- Includes: Short stock attachment, set up tools and manuals. -- Dust collection Min. 3,500 CFM -- Air requirement 90 psi. -- 150 AMPs. at 220 V. -- Machine dimensions , length & width 137” long, x 54” Width x 68” High Note: Brand New with Warranty!
Equipment Location:WEST COAST
Bob Dykstra
800-374-5009 ext:378
CAM-WOOD Model SM-236U Moulder Feed Through -- 6-Head (B-R-L-T-T-U), working cap. 9" x 4-3/4" -- Head sequence: Bottom 10 HP, Right 10 HP, Left 10 HP, Top 15 HP, Top 15 HP and Universal 5.5 HP motor. --SPECIFICATIONS --Max. (Min.) Working Thickness 4-3/4" (5/16") --Min. Working Length 9½" --Feed Motor 7½ HP --Elevation 1½ HP -- Spindle Dia.: 40 MM with cutterhead speed of 6,000. Mechanical digital readouts for all spindle adjustments, as well as chipbreakers and pressure elements. Tool cutting circles: vertical spindles 5" to 6.25" and top spindles 5" to 7". -- Variable Feed: From16 ~ 82 FPM with LED speed readout. Over sized top and bottom rollers run synchronized, ensuring smooth feeding. The three independent section pneumatic pressures for the infeed rollers, in-process rollers and outfeed rollers can be set with individual pressure allowing for consistent feeding. -- Universal spindle with 270° rotation form the left side. -- Includes: Infeed table 2M (6'6") with manual table lubrication ports. Side pressure roller at infeed; Hard chrome-plated table for maximum wear resistance. Full sound and safety enclosure and manuals. Optional: Short Stock Feed Package $900.00
Equipment Location:WEST COAST
Bob Dykstra
800-374-5009 ext:378
CAM-WOOD SM-155A Feed Through Moulder 5-Head Moulder with a 6" width and a 4.75" max. capacity.Equipped with: -- Cast Iron main frame to maximize stability & minimize vibration during operation for years of use. -- Fully enclosed sound hood with lift up door for easy set-up access. -- Adjustable infeed table w/fence for straightening rough sawn material. -- 16 - 66 FPM Variable feed speed system with top driven rollers. -- All spindle adjustments except 1st bottom spindle with mechanical digital readouts. -- Left and top spindles with mechanical digi-set readouts. Chipbreaker and pressure element with mechanical digital readouts for accurate adjustment and precise settings.Complete with: 5' Infeed table length, Chromed table plates, fences and pressure shoes. Manual waxilit pump, Central lubrication of the machine from the front side.SPECIFICATIONS SM-155A Max. (Min.) Working Width 6" (3/4")Max. (Min.) Working Thickness 4-3/4" (5/16")Min. Working Length 9½"1st Spindle Horsepower 7½ HP2nd, 3rd Spindle Horsepower 5½, 5½ HP4th, 5th Spindle Horsepower 7½, 7½ HPFeed Motor 4 HPElevation 1 HPSpindle Diameter 40 MMCutter Speeds (RPM) 6500Variable Feed Speeds (FPM) 17 ~ 66Cutter head Diameter 1st Bottom Head 5"2nd ,3rd Vertical Head 5" ~ 6-1/4"4th, 5th Head 5" ~ 7"Pneumatic Air 90 PSI (CFM) 5Dust Outlet Diameter 5" x 5N.W. (LBS) 5900G.W. (LBS) 6700Includes: -- Operator/spare parts manuals and set up tools.
Equipment Location:WEST COAST
Bob Dykstra
800-374-5009 ext:378
CAM-WOOD XL-600 Top & Bottom Planer;24" Capacity Planer with straight knife heads with HSS knives for accurate and powerful two-sided planing in one pass. Spiral Heads with Carbide Insert Knives available, add ...$3,470.Specifications: -- 24” Max. Planning Width 6-5/8” Max. Planning Thickness -- 1/4”Max. Cutting Depth -- 12” Min. Planning Length -- 10 to 70 FPM Feed Speeds (Variable) -- 4,200 RPM Cutter Head Speed -- 4-Knife Cutterheads -- 30 HP Top Head Motor -- 15 HP Bottom Head Motor -- 3 HP Feed Motor -- 1 HP Elevation Motor -- Table Size (L x W) 93" x 24" -- Net weight 6,930 Lbs and Gross weight 7,700 LbsEquipped with: -- Standard equipment includes Automatic Thickness Controller for quick, accurate thickness adjustments. -- Top and bottom straight knife cutter heads with HSS knives for accurate and powerful two-sided planing in a single pass. -- The Planer’s table surface is precision ground then chrome-plated and polished to a mirror finish; wear resistance, easy to clean and maintain.Feed System: -- Heavy-duty upper feed carpet (conveyor) with spring-loaded steel “fingers” holds stock firmly against the Planer’s table; prevents stock splitting while providing positive feed and smooth finish for rough and finish planing. The conveyor (carpet) is fitted with numerous pressure pins, or fingers, which firmly holds and stabilizes stock during the planing process. Fingers apply moderate pressure to the stock and provides accurate planing while preventing wide cupped boards from splitting and feeding problems while planing narrow material. -- (4) Powered feed rolls are driven via a gearbox linked to heavy-duty chains and sprockets; provides smooth even feeding during rough and finish planing. -- Stepless variable speed control for smooth adjustment of feed speed depending on the material hardness, depth of cut & width; allows for the best finish and feed speed. -- Anti-kickback device provides safety and is designed to work in unison with a conveyor stop. Safeguards mechanical parts in case of overload situations.Features: -- The heavy-duty CAST IRON frame supports the worktable, helps dampen vibration, and ensures years of dependable service. -- Powerful industrial motors for maximum cutting capacity. -- All precision sealed-for-life bearings for long and durable use. -- A built in cutterhead stand is designed for convenient knife changing at the bottom cutterhead. -- Changing knives on the upper cutter head only requires removal of the upper dust chute. -- Setup time is minimized to set cutter head height using the auto material thickness device. -- The top and bottom cutter heads are precision balanced to provide smooth, chatter-free planing regardless of the feed rate or hardness of planed material. -- 1/2 HP Motor provides quick and accurate top head thickness adjustments. Optional: Spiral Insert Cutterheads allow fast, accurate insert changes and minimum down time -
Equipment Location:WEST COAST
Jeff Terrill
800-374-5009 ext:349
CAM-WOOD XL 450 18" Wide Double Surfacer18" Planer with straight knife heads with HSS knives for accurate and powerful two-sided planing in one pass. Spiral Heads with Carbide Insert Knives available, add $3,000.Specifications: -- 17-3/4” Max. Planning Width -- 6-5/8” Max. Planning Thickness -- 1/4” Max. Cutting Depth -- 12” Min. Planning Length -- 10 to 70 FPM Feeding Speed (Variable) -- 4,200 RPM Cutter Head Speed -- (4) Knife Cutterheads -- 15 HP Upper Motor -- 10 HP Bottom Motor -- 3 HP Feed Motor -- 1/2 HP Elevation Motor -- Table Size (L x W) 88" x 16" -- N.W. 5,840 Lbs -- G.W. 6,500 LbsFeatures: -- Standard equipment includes Automatic Thickness Controller for quick, accurate thickness adjustments. -- Top and bottom straight knife cutter heads with HSS knives for accurate and powerful two-sided planing in a single pass. -- The Planer’s table surface is precision ground then chrome-plated and polished to a mirror finish; wear resistance, easy to clean and maintain.Feed System: -- Heavy-duty upper feed carpet (conveyor) with spring-loaded steel “fingers” holds stock firmly against the Planer’s table; prevents stock splitting while providing positive feed and smooth finish for rough and finish planing. The conveyor (carpet) is fitted with numerous pressure pins, or fingers, which firmly holds and stabilizes stock during the planing process. Fingers apply moderate pressure to the stock and provides accurate planing while preventing wide cupped boards from splitting and feeding problems while planing narrow material. -- (4) Powered feed rolls are driven via a gearbox linked to heavy-duty chains and sprockets; provides smooth even feeding during rough and finish planing. -- Stepless variable speed control for smooth adjustment of feed speed depending on the material hardness, depth of cut & width; allows for the best finish and feed speed. -- Anti-kickback device provides safety and is designed to work in unison with a conveyor stop. Safeguards mechanical parts in case of overload situations.Additional Specifications & Features: -- The heavy-duty CAST IRON frame supports the worktable, helps dampen vibration, and ensures years of dependable service. -- Powerful industrial motors for maximum cutting capacity. -- All precision sealed-for-life bearings for long and durable use. -- A built in cutterhead stand is designed for convenient knife changing at the bottom cutterhead. -- Changing knives on the upper cutter head only requires removal of the upper dust chute. -- Setup time is minimized to set cutter head height using the auto material thickness device. -- The top and bottom cutter heads are precision balanced to provide smooth, chatter-free planing regardless of the feed rate or hardness of planed material. -- 1/2 HP Motor provides quick and accurate top head thickness adjustments. Optional Spiral Insert Cutterheads allow fast, accurate insert changes and minimum dow
Equipment Location:WEST COAST
Jeff Terrill
800-374-5009 ext:349
CAM-WOOD XL-600S Top & Bottom Planer:24" Capacity planer with Spiral Carbide Cutter Heads for accurate and powerful two-sided planing in one pass.Features & Design: -- The work table surface was precision ground and then electro chrome plated and polished to smooth mirror finish. -- A heavy duty feed conveyor with metal spikes firmly holds stock securely to the work table. -- A Stepless variable speed control for smooth adjustment of feed. -- The infeed conveyor, fitted with numerous pressure pins, will moderately press the stock, and then accurate planing surface can be performed to prevent jumping. -- The (4) power feed rollers are driven with a geared transmission box linked with heavy-duty drive chain and gears. -- A twist torsion anti-kickback device provides additional safety. It safeguards mechanical parts in case of overload. -- A ½ HP motor is utilized to quickly & conveniently make adjustments in thickness when setting the upper cutter head.Technical Specifications: -- Max. Planing Width: 24" -- Max. planing thickness: 6-5/8" or 8" (specify when ordering) -- Max. cutting depth: 1/4". -- Min.Planing length: 10". -- Feed speed, variable, 10 - 50 FPM. -- Cutterhead speed: 4,200 RPM. -- Upper motor 30 HP & Lower motor 15 HP. -- Feed motor: 5 HP and Elevation motor: 1/2 HP. -- Table size: L 93" x W 24" -- Weight: 6,950 LbsThe heavy duty rigid cast iron frame supports the work table and helps dampen vibration and ensures years of dependable service.Equipped with : " Digital Thickness Set-Up Controller"
Equipment Location:WEST COAST
Jeff Terrill
800-374-5009 ext:349
CAM-WOOD WP-1010H Single Sided Planer40" Solid cast iron construction planer with 20 HP motor.Features & Specifications: -- Precision ground cast iron table with motorized work table raising & lowering manual adjustment by hand wheel via (2) large lead screws. -- Digital thickness display with touch pad positioning control for accurate thickness adjustments. -- Maximum thickness capacity -- 8"Spiral cutterhead with 4-sided carbide inserts provide precise, efficient planing with low noise levels. -- With (4) each 4" diameter dust outlets -- 20 HP Main drive motor. -- 3 HP Variable feed speed 10 to 50 FPM -- Maximum depth of cut 1/4". -- Sectional steel infeed roller & segmented chipbreaker. -- Independently adjustable feed rollers. -- (2) Externally adjustable bed rollers. -- Hinged top for easy access to cutterhead & gear assembly. -- Self-braking motor. -- Magnetic starter & thermal overload switch. -- Emergency stop. -- Operations manual, parts list & tool kit.
Equipment Location:WEST COAST
Ed Webb
800-374-5009 ext:377
CAM-WOOD XL 1000 Double Surfacer, 38" Wide: 38” Max. planning width x 0.30" min. to 7” max. planning thickness with up to 3/8” stock removal; 13” min. stock length. Basic Specifications: -- 40 HP Top and 20 HP Bottom head motor driving the cutterheads at 4,000 RPM. -- 4-Knife cutterheads with high speed steel straight knife cutterheads; includes (1) set of HSS knives. Carbide insert spiral cutterheads available, add ...$6,000. -- Feed speeds from 22 to 52 FPM via a 5 HP variable speed feed motor; includes a 1/2 HP elevation motor. -- Table size is 111” x 38” wide. Machine weighs in excess of 11,000 Lbs! Features: -- Upper & lower straight knife cutterheads with carbide knives for accurate two-sided planing in one pass. -- Top and bottom cutterheads are precision balanced to provide consistently smooth chatter-free planing regardless of the feed rate or hardness of material being surfaced. -- Auto digital thickness control for quickly and accurate setup. -- Table surfaces are precision ground and chrome-plated and polished to a smooth mirror finish. The durable wear resistant surface is easy to clean and maintain. -- Heavy-duty feed conveyor with metal spikes firmly holds stock securely to the worktable and feeds positively giving a smooth finish for rough or final planing. -- Stepless variable speed control for smooth adjustment of feed rate depending on the material hardness, depth of cut & lumber width to provide the best finish surface and fastest feed rate. -- Carpet style upper feed conveyor is fitted with numerous pressure “fingers” which allow feeding pressure to be equalized over the surface of the lumber. Moderate downward pressure results in a positive feed and accurate planed surfaces and at the same time, eliminates damage to narrow or cupped material. -- (4) Powered feed rollers are driven with by geared transmission boxes linked with heavy-duty drive chains and sprockets to provide smooth and even feeding during rough or finish planing. -- Twist torsion anti-kickback device provides additional safety; designed to work in conjunction with the feed conveyor emergency stop and safeguards mechanical parts in case of overload. -- Heavy-duty rigid cast iron frame supports the worktable and helps dampen vibration while ensuring many years of dependable service. -- Heavy duty industrial motors for maximum cutting capacity. -- Precision, sealed, long-life bearings used throughout for durability usage. -- Swivel stand designed for convenient knife changing on the bottom cutterhead, -- Changing knives on the top cutterhead requires only the removal of the upper dust hood to access the knives. -- Optional spiral insert head design allows for fast and accurate insert changes. -- Adjustment to set cutterhead height using the auto material thickness device provides quick and easy stock thickness adjustment. -- 1/2 HP Motor for quick & convenient thickness adjustments for setting
Equipment Location:WEST COAST
Jeff Terrill
800-374-5009 ext:349
CAM-WOOD MODEL WP-4S-500 S4S 4-SIDED 20" PLANER WITH THE FOLLOWING FEATURES AND SPECIFICATIONS:SPECIFICATIONS: -- 2-3/4" - 19-5/8" Width Capacity -- 3/4" - 11-3/4" Thickness Capacity -- 18 - 66 FPM Feed Speeds (Variable) -- 10 HP Bottom Head Motor -- 15 HP Top Head Motor -- 15 HP Left Side Head Motor -- 10 HP Right Side Head Motor (fence side) -- 7-1/2 HP Feed Motor -- 5” dia. Cutterhead Capacity on Top & Bottom Spindles -- 5” to 6” dia. Cutterhead on Side Head Spindles -- (4) 6” dia. Dust Hoods -- Machine Size:110" x 86" x 94" -- Machine weight: 15,200 LBSFEATURES: -- Compact construction, huge moulding or planing capacity, extremely flexible and high erformance design -- Digital controller; sets thickness & width adjustment automatically. -- Rigidly mounted alloy steel spindles provide smooth, vibration-free power transfer and minimal runout. -- Side head spindle height adjustment by precision rack & pinion gears. -- Heavy motor power at each spindle. -- TEFC motors with sealed-for-life ball bearings, provides accurate, vibration-free spindle vibration. -- Magnetic overload starters. -- High speed, 7,000 RPM spindle speeds. -- Compact construction. -- Variable feed speed. -- Heavy-duty welded steel frame.OPTIONS:For 12" thickness capacity, add $1,750
Equipment Location:WEST COAST
Jeff Terrill
800-374-5009 ext:349