Woodworking Equipment For Sale

TIMESAVER - TB-440-4, ...2-Head Wide Belt Sander40" Width cap.; Drum and Combination Head.Head Configuration:1st Head - 50 HP; 12" rubber covered contact head.2nd Head - 40 HP; combination platen head.Specifications: -- Sander completely rebuilt (15) years ago. -- Rubber covered abrasive rolls were recovered, grooved and balanced, along with ALL pinch rolls recovered at FLETCHER MACHINE CO., Lexington, NC. -- Electric eyes upgraded to BANNER's send and receive type; includes battery backup system for controls (no crashes when machine has power outage). -- Feed speed gear box driven by AC Drive controlled 10 HP motor. -- Rebuild included: Table removed and platens ground flat; all bearings replaced, including pinch rolls and tracking cylinders; tension cylinders plasma sprayed, reground & new factory seal kits. -- Entire machine was disassembled, sand blasted and DUPONT "Zolatone" primed and painted. -- RAINBOW brand feed conveyor belt replaced in 2014. -- Many more upgrades, too many to list: Please contact for additional information. -- Machine is in good condition, running daily, and has had regular recommended service intervals; includes all factory manuals, blueprint drawings, parts list with numbers supplied, and when machine was new. -- Machine used in solid wood wide belt sanding. -- Includes Cloth aluminum Oxide Belts: 7 - 50 grit; 1 - 60 grit; 8 - 80 grit; 2- 120 grit; 8 -1 80 grit..

TIMESAVER 237-3 IC Wide Belt Sander: 3-Head, 36" cap. - Drum, Drum, Finishing Platen. -- 1st Head: Rubber covered contact roll, 11-1/2" dia., 50 HP motor; -- 2nd Head: Finishing platen 2-1/2" 30 HP motor. -- 3rd Head: Finishing platen 2-1/2" wide, 30 HP motor. Specifications: -- 37" x 75" Abrasive belts. -- "POSI-TRAK" electronic sanding belt tracking. -- Motorized part thickness adjustment. -- 0" - 6" Opening, automatic part thickness adjustment. -- Infeed & outfeed spring loaded holddown shoes. -- Variable feed speed from 15 - 45 FPM, 5 HP feed motor.Additional Features: -- Motor load meters. -- Infeed emergency stop bar. -- Controls mounted on belt loading side. , -- Disc brakes on sanding head motors. -- 30" Infeed load area.Actual model: TIMESAVERS "237-3IC"

TIMESAVER - 337-2, ...2-Head Wide Belt Sander36" Width cap., Drum & Combination HeadHead Configurations:1st Head: 11-1/2" Dia. spiral grooved rubber contact roll 40 HP motor.2nd Head: Combination Head, Rubber contact Roll & Platen 30 HOSpecifications: -- 37" x 75" Abrasive belts with pneumatic tracking. -- 2 HP Feed drive; Variable feed speed from 20 - 60 FPM. -- Infeed & outfeed spring loaded holddown rolls on both heads. -- Motorized thickness adjustment with indicator, 0" - 6" opening. -- Infeed safety stop bar. - Also has adjustable shoes before and after each head. Equipped with & Features: -- Controls mounted on belt loading side. -- Sanding head motors with air caliper disc brakes --Motor load meters.

TIMESAVERS 252-4-IC, ... Wide Belt Sander, 4-Head.4-Head, 51" cap. - Great sander for solid wood and veneer panels equipped with (2) Contact rolls and (2) Air platens. Head Configuration1st Head: Rubber covered contact roll, 9-1/2" dia. 60 - 70 Durometer, 40 HP motor.2nd Head: Rubber covered contact roll, 9-1/2" dia. 50-60 Durometer, 30 HP Motor.3rd and 4th Head: Finishing platens, 2-1/2" wide "Veneer Saver" inflateable platens with adjustable timers for leading and trailing edges, 20 HP motor each head.Specifications: -- 38" Constant pass line height of Vacuum conveyor with suction fan and motor bed assembly for veneer and solid wood sanding. -- Adjustable air floating infeed and outfeed hold down shoes. -- 52" x 103" abrasive belts with "POSI-TRAK" electronic tracking.Equipped with & Features: -- Motorized part thickness adjustment with mechanical digital readout. -- Auto part thickness set-up, 0" - 6" opening. -- Hydraulic feed belt operation of 15 - 45 FPM via 7-1/2 HP hydraulic pack. -- 4-Motor load meters, controls mounted on belt loading side. -- Disc brakes on sanding head motors. -- 30" Infeed load area.

Single Head Top and Bottom Sander

TIMESAVER 337-2 Wide Belt Sander, (2) Heads36" Width cap., Drum, Combination HeadHead Configurations:1st Head: 11-1/2" Dia. spiral grooved rubber contact roll 40 HP motor.2nd Head: Combination Head, Drum with Platen 30 HP motor. Specifications -- 37" x 75" Abrasive belts with pneumatic tracking. -- 2 HP feed drive; Variable feed speed from 20 - 60 FPM.Equipped with & Features -- Infeed & outfeed spring loaded holddown rolls on both heads. -- Motorized thickness adjustment with indicator, -- 0" - 6" opening. -- Infeed safety stop -- Adjustable shoes before and after each head. -- Controls mounted on belt loading side, --Sanding head motors with air caliper disc brakes, and motor load meters.

Timesavers Model 2331-04-334 3-Head Orbital Sander 43" Machine

TIMESAVER 1321-14-01 43" Wide Belt Sander (2) Heads:43" width cap., drum, combination head.Head Configuration:1st Head: Rubber covered contact roll, 8" dia. with dial indicator heigth adjustment, 20 HP motor.2nd Head: Combination head with a rubber covered contact roll 3-3/8" dia. and 2-1/2" wide finishing platen, 15 HP motor.Specifications: -- Abrasive belt size: 43" x 60" -- Main motors: 20HP & 15HP -- Maximum width stock: 42" -- Minimum part length: 13" -- Maximum thickness opening: 5" -- Feed speed: 15-45 FPM -- Passline height: 33-38" -- Dust extraction: 2000 CFM (5" static pressure) -- Compressed air usage: 4 CFM @ 90 psiEquipped with & Features -- Four Jack Bed Construction -- Dual Infeed and Dual Outfeed Holddown Rolls --Air Operated Disc Brakes -- Centralized Control PanelInfeed Stop Bar -- Hour Meter -- Main Motor Percentage Load Meters -- Electronic Go-To Device -- Motorized Thickness Adjustment -- Through-Beam Abrasive Belt Tracking -- Quick Release Outboard Support -- Variable Speed Conveyor Drive

TIMESAVERS 7537 WIDE BELT SANDER1-Head, 36" cap., 0 - 5" opening. Combination head with 4" Contact Drum & 2" adjustable Finishing Platen. Equipped with: 37" x 75" Abrasive belt cap., oscillation controlled by through-beam electronic abrasives belt tracking system. 20 HP Main drive motor, disc brakes on main motor. Power raising and lowering of the conveyor bedMechanical digital thickness indicator, motorized conveyor bed lift, and Double infeed & outfeed holddown rollers.15 - 45 FPM Variable conveyor feed speed, (4) bed jacks.Complete with:Quick release outboard support, infeed stop bar.Centralized control panel, hour meter, main motor percentage of motor load indicator.

Timesaver Mdl 337-6 36" Belt Sander S/N 18395

TimeSaver Mdl 325-2 36" Wide Belt Sander S/N 7887

Only 697 hours, taken from service (2) top heads - one orbit, one brush (1) 3HP main orbit motor (1) 3HP feed motor (1) 1HP brush motor (1) 1HP oscillation motor 460V Max. stock width 36" Max. thickness 6" 32-38" variable passline height 2,000 CFM @ 5,000 FPM exhaust air requirements

TIMESAVERS 4331-45-001 Wide belt sander (3) heads 51" width cap. 1st Head 9-1/2" Dia. rubber covered (60-65 Duro) 40HP motor 2nd Head 9-1/2"Dia. rubber covered (60-65 Duro) 30HP motor 3rd Head Combination head with 6" dia rubber covered contact roll and a 2-1/2" finishing platen. 30HP motor. 52" x 103" abrasive belts with dual "posi-trac" electronic-solid state tracking Controls mounted on belt loading side Conveyor feed belt replaced (2) years ago.

Timesavers Model 2321-24-01 Sander 43"x75" Belts 2-Head IceClean System on each head

TIMESAVERS - 352 HDA, ...Abrasive Planer/Sander2-Head, 51" width cap. Heavy Duty Sander. -- 1st Head: Smooth steel contact roll, 11-1/2" dia., 75 HP motor. -- 2nd Head: Spiral Grooved hard rubber contact roll (11-1/2" dia.) , 75 HP motor; 52" x 103" abrasive belts (6,300 & 4,300 SFPM) with POSI-TRAK electronic tracking. Equipped with: -- Heavy-Duty solid rubber (no vacuum holddown) feed belt for Heavy-Duty operation. -- Motorized part thickness adjustment, 0" - 6" opening. -- 38" - 32" Conveyor height passline with MITUTOYO LED readout, conveyor belt feed. -- 5 HP Variable feed speed from 20 - 60 FPM, smooth rubber conveyor belt. -- Infeed & outfeed spring loaded holddown shoes, infeed emergency stop bar, anti-kickback fingers on infeed. -- Disc brakes on sanding head motors, 18" infeed load area, and motor load meters on sanding heads.

2-Head, 42" width capacity Sanding / Denibbing system. -- (2) 5" Wide platens featuring a "dual" action head with a high speed orbital movement and combined back & forth oscillation to remove abrasive belt crossgrain scratches; platens designed with a quick change system for abrasive material. -- (1) Nylon abrasive impregnated (150 grit) Cleaning / De-Nibbing brush, 10" dia., drive unit for brush rotation, brush wear adjustment via jack screws. -- Vacuum holddown conveyor system with variable feed speed 5 - 15 FPM. -- Double infeed and outfeed holddown pinch rollers. -- Power raisng and lowering of the conveyor bed with AUTO-SET feature, 0" to 6" part thickness capacity. (4) DUFF-NORTON acme screw jacks under conveyor bed, 36" infeed conveyor area.

Timesaver 2331-45-006 (3) Head Wide Belt Sander;52" Width cap , Drum, Drum, Combination HeadHead configuration 1st Head: 30 HP motor, 8" dia. rubber covered serrated drum with 65 / 70 duro.2nd Head: 25 HP motor, 8"dia rubber covered serrated drum with 65 / 70 duro.3rd Head: 25 HP motor, segmented combination, drum/platen 5-1/2" dia. drum also with 65 / 70 duro drum and a 2-1/2" platen;Specification -- 3rd head has abrasive belt air jet blow off. -- Variable feed 15 / 45 FPM; -- Double in-feed and out-feed rubber covered hold-down rolls.Equipped with & Features -- Star Delta starters on all heads; disc brakes on main motors. -- In-feed stop bar, motorized bed table lift -- PLC controller with HMI interface, electronic abrasive belt tracking.Note from Seller: 1800 Hours! We are the 2nd owner of the unit. Well maintained by original owner and purchased by us in 2022. At that time the machine was inspected an by original owner and purchased by us in 2022. At that time the setup and all adjustments done by TS tech

---In Auction---Good Condition---Heavy-Duty--- TIMESAVERS 343-1 43" W Single-Head Abrasive Planer Specifications: - Thickness cap. 0 - 6". - Feed speeds 20 to 60 FPM. Equipped with: - 11-1/2" Dia. Smooth steel contact roll, with 100 HP Motor with Brake. - Double 2-3/4" infeed & outfeed hold-down rolls. - 43" x 75" Abrasive belt, with Electronic tracking, Automatic self-centering system, & Pneumatic belt tensioning. - Hydraulic feed, with 5 HP Hydraulic unit. - Motor load meter. - Safety bar stop. Complete with: - Owners Manual. Details, Photos, Bidding: https://exfactoryauctions.com/Detail/AP-232006/event/A051324$1

--at Auction, Seller Loading, (2) 75HP Motors, Built to Last!-- TIMESAVERS 352 HDA 51" 2-Head Abrasive Planer/Sander 2-Head, 51" width cap. Heavy Duty Sander. - 1st Head: Smooth steel contact roll, 11-1/2" dia., 75 HP motor. - 2nd Head: Spiral Grooved hard rubber contact roll (11-1/2" dia.) , 75 HP motor; 52" x 103" abrasive belts (6,300 & 4,300 SFPM) with POSI-TRAK electronic tracking. Equipped with: - Heavy-Duty solid rubber (no vacuum holddown) feed belt for Heavy-Duty operation. - Motorized part thickness adjustment, 0" - 6" opening. - 38" - 32" Conveyor height passline with MITUTOYO LED readout, conveyor belt feed. - 5 HP Variable feed speed from 20 - 60 FPM, smooth rubber conveyor belt. - Infeed & outfeed spring loaded holddown shoes, infeed emergency stop bar, anti-kickback fingers on infeed. - Disc brakes on sanding head motors, 18" infeed load area, and motor load meters on sanding heads.

TIMESAVERS 2321-23-21 Planer Sander 2 Heads2-Head, 36" width cap.Specifications: -- 1st Head: 6" Dia. Helical head with (6) spirals of 4-sided carbide inserts, 25 HP motor. -- 2nd Head: Combination head with 5-1/2" dia. contact roll and 2-1/2" wide finishing platen, 20 HP motor, sanding head with 37" x 75" Abrasive belt with "POSI-TRAK" electronic tracking. -- Dial indicators for height adjustments, -- Conveyor belt feed with variable feed speed 20 - 45 FPM, automatic conveyor belt tracking. -- Anti-kick back fingers on infeed; planer head with sectional infeed shoe and double holddown rolls on outfeed, double infeed and outfeed rubber covered holddown rolls on sanding head. -- Motorized part thickness adjustment 0" - 5" with mechanical digital readout; -- Minimum part length 15"; Pass line height 33"-38". Complete with: -- Controls mounted on belt loading side, air activated caliper disc brakes on all heads, load meters for each head and 14" infeed loading area. -- Dust extraction 3,500 CFM, Compressed air usage: 3 CFM @ 90 PSI, -- Total load amps at 230 Volts - 145 Amps.