Woodworking Equipment For Sale

QUINCY "QSV-40" 40 HP vacuum pump:550 ACFM, 29.9"HgV, Direct drive rotary screw vacuum, positive lubrication fluid pump. -- Equipped with:Modulating inlet valve, temperature regulating valve, and high discharge temperature shutdown system with manual reset. -- Complete with:Complete unit enclosure, gauges, exhaust separation system, spin-on fluid filter, and magnetic motor starter -- Additional:All service records from date of purchase. -- Quincy the OEM did 1 partial and 1 full tune up every year since purchase.

Hydraulic post pointer BIFACE 350 Maximum post diameter 13.77 Inc Blade starting Automatic with the post Maximum output 200 up to 500 posts per hour

Raimann Unirip 310 Gang Rip

RAIMANN Model ASA 1650, Veneer Patcher.Specifications: -- 61" Throat cap., 3 HP gear motor with new/rebuilt drive unit, strip type mechanical plug-feeder mechanism - cap. of up to (40) plugs/Min.; -- Thickness of veneer patchable 1/32" - 1/5" (0.08 mm - 0.2 mm) (softwoods), 1/20" - 3/16" (hardwoods). P-34 dies. -- Tool sequence: Veneer patch is cut by the table die and scrap is ejected into discharge chutes, veneer patch blank is then positioned against the underside of the table die, plug punch cuts replacement veneer patch from underside and patch is inserted into the proper position. -- Reconditioned by experts. -- Overall size: 10' 8" (3,250 mm) Length x 67" (1,700 mm) height; approx. weight 12,000 Lbs (5,450 kG). -- Optional Glue applicator add ...$9,975. -- Optional strip feeder add ...$6,750.Actual model is RAIMANN Model ASA 1650

Raimann KM310M Rip Saw ValuRip Infeed System One moving Blade

Raimann UniRip 310 Rip Saw Misc spacers and blades Bought new in 2020

Raimann KM310 Rip Saw Per seller: The saw runs material. The variable infeed is stuck on one speed.

Ramco Mdl 25 18 Wide Belt Sander S/N 1940

Ramco Mdl 1800B/84 Wide Belt Sander S/N 25S1

RAMCO 37T/60 Single Head Wide Belt Sander; (1) Head, 37" width capacity, combination head with contact roll and basic dual purpose finishing platen. -- 20 HP main motor; 37" x 60" abrasive belt with electronic tracking and pneumatic belt tensioning. -- 1 HP Feed drive, variable feed speed 20 - 80 FPM, infeed & outfeed holddown rollers. -- 0" TO 6" Thickness capacity. -- Complete with: Load meter and safety bumper.

Single head, 36" width cap. - 7" Dia. rubber covered contact snadeing roll followed by an adjustable 2-1/2" Wide finishing platen, 20 HP motor. -- 37" x 75" Abrasive belts, electronic abrasive belt tracking. -- Equipped with: Infeed & outfeed spring loaded holddown rolls, 0" - 6" max. motorized part thickness opening and Programmable thickness adjustment; 15 - 45 FPM variable feed speed driven by a 2 HP. motor. -- Complete with: Air operated disc brakes, motor load meters.

RAMCO DW-25A SINGLE HEAD WIDE BELT SANDERSingle Head 36" Wide Belt Sander with combination head. -- 4" Dia. rubberized contact drum and 2-1/2" finishing platen. -- 10 HP Sanding belt motor and 1 HP feed motor. -- 37" x 60" Belt capacity. -- Motorized thickness setting of 0" - 5-1/2" capacity. -- (2) Jackscrews to move the table-up-and down. -- Variable conveyor speeds of 15 - 45 FPM. -- Infeed & outfeed spring loaded holddown rollers. -- Load meter and safety shutoff. -- Options: 12" Infeed extension table and 25" x 75" belt capacity.

RAMCO DW-37W SINGLE HEAD WIDE BELT SANDERSingle Head 36" Wide Belt Sander with combination head. -- 4" Dia. rubberized contact drum and finish platen. -- 15 HP Sanding belt motor and 2 HP feed motor. -- 37" x 60" Belt capacity. -- Motorized thickness setting of 0" - 6" capacity. -- (4) Jackscrews to move the table-up-and down. -- Variable conveyor speeds of 15 - 45 FPM. -- Infeed & outfeed spring loaded holddown rolls. -- Load meter and safety shutoff. -- Options: Infeed extension table and 37" x 75" belt capacity.

Razorgauge Optimal Optimizing System

Reckmann Moulder/Sander ready to be loaded!

These machines are in good working condition and can be inspected under power. Designed to produce a wide range of spiralled wood roping in a continuous length. Square stock is fed into the machine to produce twisting rope. Manufacturer specs (to be confirmed): - Type L.C.B. 600 - .75 kW feed motor - 1.5 kW drawing unit - 1.5 kW right cutter motor - 1.5 kW left cutter motor - Workpiece diameter: min 8 mm, max 60 mm - Workpiece length: infinite - Feed speed: 15-80 RPM - Spindle diameter: 18 mm - Includes (1) cutter on drawing unit used for rope moulding - 3-4" dust ports - Splitter machine to cut dowels in two - (4) different diameter cutters and dies

Renzo Borgonova Rope Moulder and Splitter

RENZO BORGONO 800/I Hot Embosser. Machine is designed to "hot engrave" decorations onto picture frames, furniture accessories and mouldings. Heats the pattern wheel and presses it into wood transferring the design onto the product. -- Max. 450 mm(7.7") Engraving width cap.; 700 mm (27.5") material width cap., MIn: 100 mmm (3.94") width; 80 mm (3-1") dia. arbor; 140 mm (5.5") min. and 440 mm (17.3") max. embossing roller dia.; 3 mm (1/8") max. embossing depth with base-relief rollers and 7 mm (0.27)") max. depth with cutting edge rollers. -- 1.5 HP (1.1KW) Top drive gearmotor, feed speed 5.5 - 26 FPM output. -- Approx 8 KW heating by electric lamps, with thermal probe/thermostat. -- Water cooled shaft to avoid flexing and hear propagation. Coolant circulation pump 0.12 HP. -- Overall Dimensions: 1200 mm x 1400 mm x 17 mm height (48" x 55.5 x 71" H), Net weight: 950 Kg/2100 Lbs..

RENZO BORGONPVP, BL 94-2, ...Vertical Moulding Stacker.This 2-ARM AUTO STACKER has been specially designed to facilitate the loading of mouldings, picture frame strips, and other processed lineal parts onto drying racks. It eliminates the manual handling of workpieces which can mar the finish. It also increases productivity and efficiency compared to manual stacking. The machine can work with moulding of the same length or of varying lengths at the same time. -- Workpiece Length: 3,000 mm (118") Max. & 1,800 mm (72") min. workpiece width; 20 mm min. and 150 mm (6") max. material width cap. -- Stacking Capacity: (20 - 30) Pieces per minute. -- Overall Height: 2,200 mm (87"). - Overall width: 2,300 mm (91"). - Overall Length: 3,400 (134"). - Work Height: At Infeed 860 mm(34"). - Racks has (11) arms that extend out approx. 39" with 4" in between arms. -- Automatically loads "just painted" mouldings onto air drying rack. -- Process: As moulding exits coater, it is moved by belt conveyor to (2) arms which lift the piece up-and-over the top of the Stacker Station; coming down the other side, it places the moulding onto (2) arms, and a belt conveyor transfers the piece onto the 11-tier Drying Cart. -- Lifting can be triggered by electric photoeye to determine position of off-feed arms (arms move down as each tier of the rack is filled) and place moulding on the rack (indexing back-to-front). -- One rack included; additional racks, each ...$ 900.Machine overall dimensions: 3,400 x 2,300 x 2,200' weight: 1,200 kG.

RENZO BORGONOVO - BL 94-3, ... Vertical Moulding Stacker. This 3-ARM AUTO STACKER has been specially designed to facilitate the loading of mouldings, picture frame strips, and other processed linear parts onto drying racks.It eliminates manual handling of workpieces, which can mar the finish. It also increases productivity and efficiency compared to manual stacking. The machine can work with moulding of the same length or of varying lengths at the same time.Specifications: -- Workpiece Lengths are 4,900 mm (192") Max. & 1,500 mm (58") min. workpiece length, 20 mm min. and 150 mm (6") max. material width cap. -- Stacking Capacity - (20 - 30) pieces/Min. -- Overall Height of 2,200 mm (87"); Overall Width 2,300 mm (91"); Overall Length of 4,000 (157"). -- Work Height at Infeed 860 mm ( 34"); Racks have (11) arms that extend out approx. 39" with 4" in between arms.Operation: -- Automatically loads just-painted mouldings onto air drying rack. -- Process: As moulding exits Coater, it is moved by belt conveyor to (3) arms, which lift the piece up and over the top of the Stacker Station; coming down the other side, it places the moulding onto (3) arms. A belt conveyor transfers the piece onto the 11-tier drying cart. -- Lifting can be triggered by electric photo-eye to determine the position of off-feed arms (arms move down as each tier of the rack is filled) and place moulding on the rack (indexing back-to-front).This Stacker comes with (1) rack; additional racks are available, priced at ...$ 1,950 each