Northfield For Sale

COMIL CF-2000 CASE CLAMP (AUTO FEED THRU):Automatically self-adjusting Feed-Through Clamp with: Pneumatic clamping pressure & electronic self-setting of clamping units according to cabinet size; cycle of machine can be timed to interlink with Production line.Working Capacity: -- Carcass length: 11.8" - 98.4" (300 - 2,500 mm); carcass height: 11.8" - 48" (300 - 1,220 mm); carcass depth (width) 11.8" - 39.8" (300 - 1,000 mm). -- Infeed/ through-feed conveyor belt at 19.7" (500 mm) floor height & variable feed speed from 24 - 123 FPM (7 - 37 MPM).Equipped with: -- (3) Horizontal clamping units. -- (1) Top vertical clamping beam operated by (3) pneumatic (double-acting) cylinders.Operator & Machine Control: -- Built-in operating control console with controller; LED readouts for programming of cycle time & pressure control.

COMIL - XPRESS: Case Clamp (Automatic Feed Through)Specifications -- Working width: 180 - 760 mm (7.09" - 29.92"). -- Working length: 250 - 2,500 mm (9.84" - 98.43"). -- Working height: 250 - 1,300 mm (9.84" - 51.18"). -- Working table height: 500 mm (19.69"). -- Conveyor speed: 35 MPM (114 FPM). -- Beam speed: 18 MPM (59 FPM); horizontal: 20 MPM (65 FPM); Vertical (Combined). -- Beam pressure: 1,800 kG Horizontal (3,968 Lbs); 2,000 kG vertical (4,409 Lbs).Equipped with: -- Motorized belt conveyor: 31"; W x 17’ L x 26-1/2"; H. -- (2) Vertical beams with: Ball screw drive; each with: (3) Pressure bars; 0.37 kW (1/2 HP) - 2,750 RPM motor; rack & pinion drive. -- Top beam with: 2.9 kW (4 HP) - 1,500 RPM AC Servo motor and rack & pinion drive. -- Length & height Sensors. -- BIESSE "NC 400" CNC Control with: 6" Color LCD display.Complete with: -- 3' x 12' Pressure-Sensitive Safety Mat.NOTE-1: Infeed & Outfeed Conveyors NOT included.NOTE-2: Machine is currently being fed by 600 V, and Seller states there is a built-in Multi-Tap Transformer converting to 400 V.

--high output machine-- COMIL XPRESS Case Clamp (Automatic Feed Through) Specifications: Working width 180 - 760 mm (7.09" - 29.92"). Working length 250 - 2,500 mm (9.84" - 98.43"). Working height 250 - 1,300 mm (9.84" - 51.18"). Working table height 500 mm (19.69"). Conveyor speed 35 MPM (114 FPM). Beam speed: 18 MPM (59 FPM) Horizontal, 20 MPM (65 FPM) Vertical (Combined). Beam pressure: 1,800 kg Horizontal (3,968 Lbs.), 2,000 kg Vertical (4,409 Lbs.). Equipped with: 31” W x 17’ L x 26-1/2” H Motorized belt conveyor. (2) Vertical beams, with Ball screw drive, Each with (3) Pressure bars, 0.37 kW (1/2 HP) - 2,750 RPM Motor, Rack & pinion drive. Top beam, with 2.9 kW (4 HP) - 1,500 RPM AC Servo motor and Rack & pinion drive. Length & Height Sensors. BIESSE "NC 400" CNC Control, with 6" Color LCD display. Complete with: 3' x 12' Pressure-Sensitive Safety Mat. NOTE 1: Infeed & Outfeed Conveyors Not included. NOTE 2: Machine is currently being fed by 600 V, and Seller states there is a built-in Multi-Tap Transformer converting to 400 V. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

CONCEPTION CRP-180 Short Block Feeder Infeed ConveyorSpecifications: -- About 4 m long X 1.2 m wide, 2-ply rubber belt, friction back with Photocell for automatic operation -- Short Block Feeder; Blocks to be 25mm longer than width -- 14' rotating carousel with adjustable speed via VFD with Motorized wheel to avoid blockage -- Exit opening adjustable to the block width -- 200 mm x 7m long belt conveyor to carry the blocks to index rolls; Servo indexer controlling the flow powered by an electric motor; Speed-up belt powered by an electric motor -- Wane System: Scanner to detect wane integrated in conveyor -- Display screen to show wane detected; Kicker to kick blocks that are not in good orientation -- Conveyor to return it into the spreader belt conveyor -- Automatic Operations

CONQUEST 1-23H Horizontal 32 mm Boring Machine;Specifications: (1) 23-Spindle horizontal boring head, 2 HP "BALDOR" motor, helical gear driven spindles spaced on 32 mm centers, 3,450 RPM; cast table. -- Equipped with: Pneumatic head activation, side fences. -- Complete with: (2) Pneumatically activated holddowns and foot pedal. NOTE: This unit has 2 sets of arms. All the screws have been replaced for the drill bits. Ready to go to work!

CONQUEST - 2-46: Double Row Line Borer -- (2) Rows of (23) spindles; drilling depth up to: 2-3/8"; drills from bottom-up. -- Specifications: (2) 2 HP BALDOR Motors; 3,450 RPM spindle speed.Adjustable opening between heads from: 5-1/2" - 27" w/mechanical digital readouts. -- Equipped with: (2) Pneumatic holddowns; 120" back fence with: (3) Large flip stops; (2) air index pins for sequence boring long side panels; table height 37-1/2". -- Complete with: 10 mm Collets; position indicator; air/electrical controls; foot pedal for clamping & boring cycle. -- Includes: Full set of 5 mm bits.

In stock and ready to ship! Coral EuroDry Paint Booth - 3500-11771 CFM - 5'-16' Wide

Cornell Single Arbor CLB Splitter.

Cornell CLB Rip Saw S/N 17-12-93 W/Infeed

Cornell CLB Saw S/N CLBR-136

Cosmic Fox 13 and Fox 16 CNC Router New machines

This Cosmec Conquest 250 CNC router with a 4x8 vacuum table is being listed for parts or as a restoration project. The CNC did run prior to being shipped to our shop a couple of years ago, but it has not been wired to power since then, and the working status is unknown. If you have a Cosmec CNC that needs parts replaced then this would be a great machine for you. Included in the listing are two Becker vacuum pumps (see photos for details) that could be can be hooked to this machine or plumbed to another.

COSMEC NR32-16CUK 510 CNC Router with ATC and Boring:63" x 122" Fixed table: Moving gantry design in a front-to-back configuration; 2-zone Phenolic vacuum table with pop-up pins for part location. -- Equipped with:(1) 10 HP "HSD" ISO 30 Type ATC spindle, 8-position side-mount tool carousel, variable spindle speed from 800 - 18,000 RPM, 11" Z-axis stroke. -- Boring unit:(1) 17-Spindle boring block (11) vertical and (6) horizontal and X-Axis - 5,000 RPM. -- Axis travel: X-Axis travel 3,190 mm (125.6"), Y-Axis travel 2,010 mm (79.1"), Z-Axis travel 280 mm (11.0"); Z-Axis clearance under rail 250 mm (9.84") - Rapid traverse on X- & Y-axis 38 m/Min (1,496 IPM). -- Control:OSAI series 10 numerical control with screen and including, 3-axis linear & circular interpolation, and RS 232 connection with a user-friendly operator interface. -- All axes Incorporate brushless, closed-loop Servo motors driving precision ball screws and ride on STAR linear guideways with an automatic lubrication system servicing the way and ball screw bearings. -- Complete with:Vacuum pump, assorted tool holders, and manuals.

COSTA - KK CC-CCC 1350, ...5-Head Top & Bottom Wide Belt Sander.53" Width capacity; (2) Bottom drums, (3) Top drums.Bottom Machine: -- Constant pass line height: 1,000 mm (39"). -- Motorized infeed conveyor. -- Motorized infeed pressure rollers. -- Sectioned infeed pressure beam.1st Head: -- Rubber covered cylinder ,16" dia., 35 kW motor. -- Intermediate pressure shoe with lips and rubber covered rollers.2nd & 3rd Heads: -- Rubber covered cylinder, 16" dia. (2nd head), 52 kW motor (3rd head), 88 kW. -- Outfeed pressure shoe with lip and rubber covered rollers. -- Vacuum Feed Table: 10 HP (7.5 kW) motor. -- Vacuum set pneumatic for (2) levels of vacuum pull control.Top Machine: -- Infeed roller. -- Motorized infeed pressure rollers. -- Sectioned infeed pressure beam.1st Head: -- Rubber covered cylinder, 16" dia., 35 kW motor. -- Intermediate pressure shoe with lips and rubber covered rollers.2nd & 3rd Heads: -- Rubber covered cylinder, 16" dia. (2nd head), 52 kW motor (3rd head), 88 kW -- Outfeed pressure shoe with lip and rubber covered rollers. -- Vacuum Feed Table - 10 HP (7.5 kW). -- Vacuum set pneumatic for (2) levels of vacuum pull control..Equipped with and Features: -- All drives are equipped with disc brakes. -- Each Sander with vacuum feed belt with fans..

COSTA - KBH CCCT 1350 & KH2 CCCT 1350, ...Top & Bottom Sander Line.Head Configuration:Machine #1 - "KBH CCCT" 4-Head Bottom Sander. Bottom Head #1: ~10" Dia. grooved Steel Drum, 47 HP motor. Bottom Head #2: ~10" Dia. grooved rubber covered contact drum, 47 HP motor. Bottom Head #3: ~10" Dia. grooved rubber covered contact drum, 32 HP motor. Bottom Head #4: Finishing platen, 23 HP motor.Machine #2 - "KH2 CCCT 1350" 4r-Head Top Wide Belt Sander. Top Head #1: ~10" Diameter Grooved Steel Drum, 47 HP - 460 V motor. Top Head #2: ~10" Grooved rubber covered contact drum, 47 HP motor. Top Head #3: ~10" Grooved rubber covered contact drum, 32 HP motor. Top Head #4: Finishing platen, 23 HP motor.Specifications: -- PC User interface for each machine. -- Sanding belt size: 53" x 103". -- 96" Belt conveyor in between machines. -- 20 HP Vacuum Blower for each machine's vacuum bed.

COSTA KH2 CCCT 1350 Wide Belt Sander, (4) Heads52" Width cap. Drum, Drum, Drum, PlatenHead Configuration:1st Head: Steel contact roll, 9-7/8" dia, 45 HP motor;2nd Head: Rubber covered contact roll, 9-7/8" dia, 45 HP motor.3rd Head: Rubber covered contact roll, 9-7/8" dia. 60 shore, 30 HP motor.4th Head: Finishing Platen, 23 HPSpecifications: -- 53" x 103" Abrasive belts, air blast abrasive belt cleaning, pneumatic belt tensioning with electronic tracking. -- Controls with PLC processor, -- Pneumatic grit compensation with 4-position stops. -- Variable feed speed conveyor with inverter control 16 - 82 FPM.Equipped with & Features -- a Vacuum conveyor bed assembly with a 5.5 HP suction fan and motor. -- Infeed & outfeed spring loaded hold down shoes on all heads. -- Powered raise & lower conveyor bed with LED readout and motor load meters.

2 head brush sander 1350mm wide Vacuum bed panel cleaning

Costa 53" Sander Model 80 CT 1350 Wide Belt Sander (2) Machines available!

Costa Model 81 C 1350 Wide Belt Sander

A. Costa Spamatic 220 Molder