Woodworking Equipment For Sale

MA Hot Melt Glue Edgebander, Designed to allow operation by feeding parts past the glue head using the table and ball rollers, or the part can be vacuum mounted to the table (Vac Pump and Vac Pods included) with the head guided manually around the part with the weight of the applicator head counter-balanced from the boom. Specifications: Board Thickness 16mm to 45mm(0.630" - 1.77"), Strip Height 20mm-50mm (0.78"-1.97"), Strip Thickness 0.4mm to 3mm (0.016" - 0.118"), Glue Tank 0.8Liter (48 Cubic Inches, or 0.8 quart ), Processing Temperature 140 to 220 C Degrees ( 284F-428F). Current running 8 Amps, Glue Pot 1400 Watts, Max Overall Watts 2600. Weight of Movable head 20kg ( Note: this 45 lbs head weight is counter-balanced with spring.) Working height 960mm (37 3/4")

Specifications comming

IMA BIMA-610, 4' x 16’ CNC MACHINING CENTER , (1998), (460/60/3 electrics), S-4535 General Specifications: - 10 HP, 230/460/60/3 tool-changer type router spindle - (12) station traveling rotary tool changer - (1) 7-spindle & (1) 5-spindle point-to-point vertical drill blocks - X & Z axis ball-screw & Y-axis rack & pinion - Adjustable pod and rail system, (10-rails with pods) - Can include a 4’ x 8’ “universal” flow vacuum table for nested base processing - Integrated scrap conveyor under/through the working area - IMAWOP, (Windows workshop-oriented PC programming system) - Hand held start/stop spindle speed control - 3 HP Becker vacuum pump for the pod & rail side - Includes computer, an aggregate horizontal boring unit, and additional tooling - Note: the retrofitted nested base table is not included - 25' long x 9'8" wide x 8' tall

IMA Bima 810 V

Industrial Woodworking JFS25 Finger Joint Line Ultimizer Saw Ap-Quip glue system Ace-Co Hydro heads and setup stand.

INDUSTRIAL IWS 10 Finger Jointer:Shaper unit will handle material 2" to 8" wide, 5/8" to 2" thick and 5" minimum length and 30" maximum length.Equipped with: -- ( 2) Trim saws with 5 HP motors, (2) Scoring saws with 3 HP motors and (2) Shaper spindles with 15 HP motors - 1-13/16" dia.. -- Feed speeds from 0 to 150 FPM. Average speed of (100) lugs per minute; feed chain is equipped with lugs on 9" spacing. -- Glue applicator with improved glue spreading and simplified pump. -- Model 3502 90° brush transfer to the assembly and Flying Cut Off Saw. -- MOD - Assembly Press, 16' long, with (1) retrim saw, air over hydraulic clamp & squeezing including Complete with: -- Wertern/Nielson 800 FJ cutterhead grinder -- Set up stand -- (15) cutterhead -- Some spare parts

INDUSTRIAL - 3870 & 3550: Finger Jointer Medium Production2" x 8" Finger Jointer and 3550 Press with (3) Saws. -- "3870" Right & left Shaper Section, left-hand discharge. -- Shaper cap.: 1/2" - 2" Thickness; 1-1/2" - 8" width (8" with lugs on 12" centers); 5-1/2" - 48" max. material length. Equipped with: -- NO Scoring saws; (3) 7-1/2 HP trim saws w/built-in adjustable length trim. -- (2) 20 HP Shaper motors. -- INDUSTRIAL Short blockchain with Lugs on 9" centers. -- Electronic variable feed drive: 10 - 60 FPM, 10 HP Feed drive. -- Automatic chain lubrication system; overhead airbag hold down. -- APQUIP Glue Applicator with: Gluepot; 90° lateral transfer system into the Assembly Press. -- Model "3550" Assembly Press: 16' Max. cutoff cap.; automatic cycling; PLC controlled feed speed varies automatically depending on part and cutoff lengths; 50 to 200 FPM.Powered infeed flat top Chain with: New side alignment rolls to the retard section. -- Pieces advance through the Cutoff Saw to a movable limit switch and are cut-to-length; bottom mounted 5 HP Flying Cutoff Saw for continuous nonstop assembly. The cut-to-length piece drops into a final squeeze chamber while the next piece is cut-to-length. The next piece pushes out finished lengths onto material outfeed arms

Specifications: Table Size 60" x 110 "X,Y,Z Working Area 48" x 96" x 12" X,Y,Z, Traveling Position Accuracy+/-.002 Frame StructureWelded Steel X,Y Drive Primary Gear With Micro Precision R & P Z Drive Precision Ball ScrewRapid Speed0-900 IPM SpindleHigh Frequency Liquid Cooled Motor Working ModeVariable to 24000rpm Working Voltage AC220V CommandG CodeInterface PCXY Working Tolerance< 0.002 Packing Size 118" x 64" x 44" Net Weight1980 lbs

Industrial Pop Up Saw. 10hp Baldor Motor. 24" Blade. Located in Alabama #C983

Ingersoll Rand Air Compressor 3 phase 10 hp Work ready

INGERSOLL RAND D144IN 85 CFM Non-Cycling Refrigerated Compressed Air Dryer Specifications: Cap. 85 CFM. Max. working pressure 203 PSI. Max. inlet temperature 60° C (140° F). Refrigerant type R-134A. Equipped with: Aluminum braze plate heat exchanger. Variable speed fan. Microprocessor control, with Graphic display, LED Dew point indicator, Energy saving mode, & History of last (10) alarms. Remote alarm signal terminal. High pressure switch. Fully-adjustable programmable electronic drain valve. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

INGERSOLL-RAND UP6-15C-125 15 HP Single-Stage Horizontal Tank-Mounted Rotary Screw Air Compressor, with 2,313 Hrs. (as of 2/16/24) Specifications: Cap. 55 CFM, Max. pressure 125 PSI. Pump speed 6,250 RPM. Sound level 69 dBA. Equipped with: High efficiency close coupled air end. Motor shaft-mounted centrifugal blower. Electronic stepper motor inlet air control. 2-Stage Air-cooled aftercooler. Total positive lubrication system, with Spin-on filter. Compartmentalized sound enclosure. Complete with: 80 Gallon Cap. 24” Dia. x 33” L Horizontal Air Receiving Tank. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

INTERWOOD C-4010 CASE CLAMP: -- Specifications:Single-Bay pneumatic Clamp with: 108" Long x 60" high x 27" deep clamping cap. -- Equipped with:Movable; vertically positioned clamping beam with (2) adjustable horizontal clamps; (3) adjustable vertical clamps.Horizontal & vertical clamps with: (2) Pneumatic cylinders ea. for a total of (10) pressure cylinders with 2-3/4" stroke. -- Complete with:Built-in Horizontal/Vertical controls with pressure gauges.700 Lbs/Cylinder pressure at 100 PSI compressed air.

Interwood B3223 Boring Machine 23-Spindles Manufacturer Specs (to be confirmed): (2) 1.5kw, 220/380v, 3ph motors (2) banks of (23) drills 32mm drill spacing (8) spring hold downs (2) pneumatic locators 50-1/2 inch x 30 inch table Pneumatic operation / foot pedal

INTOREX TX-1300 Hydraulic Copy Lathe Hopper Feed. Overall Specs: -- Full automatic, equipped with (2) hydraulic copiers, (2) tool holder units, (2) back knives, Hopper Feed, Automatic Loading System. and electronic PLC control. Carriage runs on ball screw and tempered/ground guides. -- 1,600 mm (63") Max. between centers; hopper loading capacity of 140 x 140 mm (5.5" sq.) in automatic cycle and 210 mm (8.3") diameter in semi-automatice cycle. -- 10 HP Main motor with a variable speed of 730 - 5100 RPM; 3 HP hydraulic power pack. _ Fitted with PLC programmed logic to assist in setup; All working units (advance carriage, tailstock, tool holder units, etc) are hydraulically powered with independently adjustable speeds. -- Copying system with (2) hydraulic copier knives and traveling steady rest; includes a pre-rounding knife in front of steady; hydraulically powered back knives for doweling or plugging with form tools. -- Includes: Tooling, front safety guard; front mounted electrical panel with easy access to all pushbuttons and controls, and LED RPM display.

Ironwood BR23 Boring Machine 230V/3PH

IRONWOOD DSP-2500 25" Double Sided Planer25" X 8" Double sided planer Specifications: -- Max Working Width 25" -- Max Working Thickness 8" -- Min Working Thickness 6 /16" -- Min Length of Cut 12&frac12;" -- Upper Cutterhead Motor 25 hp -- Lower Cutterhead Motor 20 hp -- Feeding Cutterhead Motor 5 hp -- Table Rise/Fall Motor 1/2 hp -- Variable Feed Speed 26-78 fpm (8-24 m/min) -- Cutterhead Speed 5,000 rpm Cutterhead Diameter 5" -- Cutter Knives per Head 96 -- Max Stock Removal &frac12;" total / &frac14;" per head Table adjustment -- Digital Electrical 460v (3 phase) 88 amps @ 460V -- Dust Port Diameter 2 ports, 6" each ; Dust Extraction Requirements 1,600 cfm @ 4,500 feet/min -- Machine Dimensions (W x L x H) 105" x 45" x 68" -- Gross Weight 7000 Lbs

14” blade 5 HP 1” Arbor 23” x 25” table

IRONWOOD SLR 305 Straight Line Rip Saw Specifications: -- Width capacity of 18" and glue line tolerance up to 8'. -- Variable auto-lubrication system providing consistent lubrication to the chain track and automatically adjusting to the chain feed speed -- Minimum Material Length÷ 203 mm (8";). -- Material Thickness, Minimum- Maximum: 6.35 mm (0.25";) to 85 mm (3.35") -- Distance between Blade and Column 457 mm (18"). -- (8) Hold-down Rollers. -- Work Table Height 800 mm (31.5";). -- Saw Arbor Motor 15 HP. -- Saw Arbor Speed 4,500 RPM. -- Saw Blade Diameter 200-300 mm (8&ldquo; - 12&ldquo;). -- Saw Arbor Diameter 25.4 mm (1";). -- Feed Speed 56 - 131 FPM. -- Feed Motor 2 HP.Equipped with & Features: -- Laser device to ensure straight line ripping entire length of the material. -- Maximum safety protection available with multiple rows of extended anti-kickback fingers and a side protection guard. Equipped with & Features -- (8) Accurately aligned pressure rollers extend from the cast iron machining head to provide absolute butting tolerances, low maintenance, and superior safety -- Solid steel cylindrical positioning rod and quick cam, cast iron fence provide accurate set-up, fast movement, and dust-free operations. -- Table Area (W x L) 950 mm (37";) x 1,450 mm (57";). -- Net Weight 2090 Lbs. -- Dust channel outlet (saw guard) 102 mm.

Ironwood Chop Saw