Mereen-Johnson Gang Rip Saw For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 1
7 Results Found
Sort By 
STANDARD LISTINGS
2004 Mereen-Johnson 441DC  Gang Rip Saw
Call for Price

Seller will listen to offers on this one! 2004 Cameron Auto Opti-Rip Infeed Model: 34F-M1 Serial: OR164 100% Servo (only Servo is this Cameron) Full amp load 81 44" W bed Up to 20 saws can be run on the arbor No moving blades BUT there are moving lasers Although this one has been pulled from service, they have an identical one still running and available for inspection.... The seller has confirmed that this Mereen Johnson 441 Rip saw is in great working/running cnodition and it is ready to load!

Carolina Machinery Sales, Inc
704-288-1904
Call

Mereen-Johnson 424-D.C.  Gang Rip Saw
Call for Price

Mereen-Johnson Gang Rip Mdl 424- D.C. S/N MJ-2067 60HP Motor

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

1993 Mereen-Johnson 424-DC  Gang Rip Saw
$41,500

MEREEN-JOHNSON MODEL 424 Dip Chain Gang Ripsaw24" Arbor width cap., 14" max. dia. tooling, 3-1/2" max. motorized thickness adjustment. -- Capacity: 29" MIn. length for glue joint accuracy and 22" min. for busting only, 6" throat. -- Equipped with: 75 HP - 3,600 RPM TEFC direct drive motor, arbor with disc brake & load meter, arbor lockout on access door. -- Feed & chain: 5 HP Variable feed speed 30 - 170 FPM with adjustable jam protection, M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, "Quad Life" hardened dip cams, extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, automatic chain oiler with low level shutoff. -- Complete with: (4) 3" Dia. air loaded overhead pressure rolls; full width spring loaded overhead bed plate, pressure rolls & bed plate unit with powered adjustment; with scale & pointer for thickness reference; anti-kickback finger system with (1) lower & (2) upper on infeed, (1) upper assembly on outfeed. -- Includes (1) Saw Sleeve and spacer set.

Jeff Terrill
800-374-5009 ext:349
Call

1970 Mereen-Johnson 424-DC  Gang Rip Saw
$16,800

MEREEN JOHNSON 424 DC Multiple Blade Rip Saw:24" Arbor cap., 14" max. dia. tooling, 3-1/2" max., 22" min. length, 6" throat.Equipped with: -- 75 HP - 3,600 RPM TEFC Direct drive motor, arbor with disc brake. -- Feed & chain: 3 HP Variable feed speed from 50 to 150 FPM, M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, "Quad Life" hardened dip cams, extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, automatic chain oiler with low level shutoff.Complete with: • (4) 3" Dia. air loaded overhead pressure rolls; full width spring loaded overhead bed plate, height adjustment with scale & pointer reference; anti-kickback finger system with (1) lower & (2) upper on infeed.• (2) Upper dust hoods, (1) 10" & (1) 5" dia. & (1) lower 4" dia. hood, requires 3,820 CFM

Jeff Terrill
800-374-5009 ext:349
Call

2006 Mereen-Johnson 424-DC/BD  Gang Rip Saw
$54,700

MEREEN JOHNSON 424-DC Gang Rip Saw (Dip Chain):24" Arbor cap., 14" max. dia. tooling, 3-1/2" max. motorized thickness adjustment, 29" min. length for glue joint accuracy and 22" min. for busting only; 6" throat. -- Equipped with: 75 HP - 3,600 RPM TEFC belt drive motor, arbor with disc brake & load meter, arbor lockout on access door. -- Feed & chain: 10 HP Variable feed drive, feed speed from 30 to 220 FPM with adjustable jam protection, M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, "Quad Life" hardened dip cams, extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips; automatic chain oiler with low level shutoff. -- Complete with: (4) 3" Dia. air loaded overhead pressure rolls; full width spring loaded overhead bed & pointer thickness reference; anti-kickback finger system with (1) lower & (2) upper on infeed, (1) upper assembly on outfeed. -- With: (2) Upper dust hoods (1) 10" & (1) 5" dia. hood, requires 3,820 CFM; 24" saw sleeve, 3-1/8" bore; spacers and numerous blades. -- Includes: Laser rack with (10) laser lights; saw stand; (1) spacer set; (2) saw sleeves; saw cart and misc. sawblades. NOTES: -- Arbor replaced by Mereen-Johnson in 2014 and the Saw has not run much since. -- Tiger Infeed seen in photos is NOT included

Jeff Terrill
800-374-5009 ext:349
Call

2008 Mereen-Johnson 3300-DC/SR-1  Gang Rip Saw
$56,300

MEREEN JOHNSON 3300-DC/SR Short Block Dip Chain Ripsaw With (1) Moving Blade;12" (300 mm) Arbor cap., 1-3/4" thickness using 10" dia. tooling; 12" min. length for individual piece; 6" min. length with stock butted. Equipped with: -- 50 HP - 3,600 RPM TEFC Direct drive motor, arbor with disc brake & load meter, and arbor lockout on access door. -- (1) Moving blade Feed & Chain: -- 3 HP Variable feed speed 30 - 150 FPM with adjustable jam protection, M-J "Posi-Feed" dip bed carried on 3-1/4" pitch double-V chain,"Quad Life" hardened dip cams, extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, automatic chain oiler with low level shutoff. Complete with: -- (4) 3" Dia. air loaded overhead idle press rolls; full width segmented maple spring loaded overhead bed plate & spare segments, pressure rolls & bed plate unit with manual hand wheel vertical adjustment with scale & pointer thickness reference; anti-kickback fingers. -- (2) Upper dust hoods (one 8" and one 5") and (1) lower 4" dia. hood (requires 2,870 CFM).Includes: -- (2) Laser light stand (1) for moving blade and (1) for regular blade. -- Spacers, arbor sleeve, wrench, arbor setup stand, and spareparts, manuals.NOTES: -- Owner reports the machine will cut a 10' glue joint and has a total run time of 7,000 to 8,000 hours, or about 1/4 of its life when properly maintained! -- Machine is priced in Canadian Dollars.Price in USD is approx. $43,000 making this an excellent buy!

Jeff Terrill
800-374-5009 ext:349
Call

1999 Mereen-Johnson 424-DC  Gang Rip Saw

MEREEN JOHNSON 424 DC S Multiple Blade Rip Saw with Short Stock Option24" Arbor cap., 14" max. dia. tooling, 3-1/2" max., 22" min. length, 6" throat.Equipped with: -- 75 HP - 3,600 RPM TEFC Direct drive motor, arbor with disc brake. -- Feed & chain: 3 HP Variable feed speed from 50 to 150 FPM, M-J "Posi-Feed" dip bed carried on 5" pitch hardened double-V chain, "Quad Life" hardened dip cams, extruded structural aluminum feed bed slats with replaceable steel backed rubber insert strips, automatic chain oiler with low level shutoff. Complete with: -- (4) 3" Dia. air loaded overhead pressure rolls; full width spring loaded overhead bed plate, height adjustment with scale & pointer reference; anti-kickback finger system with (1) lower & (2) upper on infeed.READ THIS! This saw HAS 4,000 HOURS ON THE CLOCK !

Jeff Terrill
800-374-5009 ext:349
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved