You Have Selected

 
 
  • Used
  • New
 
  •  
 
  •  
 
  •  
 

 
1394 Results Found for Woodworking Viewing 1 - 20 of 1394 results
RECENTLY ADDED
PREMIUM LISTINGS
S O L D
The HBR-300 features hydraulic wheel tensioning, inverter feed drive, powerful 30hp main motor, oil mist cooling system, and automatic electronic digital blade height setup. This machine is in excellent used condition and mechanically sound. Maximum material size 300 mm X 300 mm (12" x 12") Saw wheel motor: 30 hp Dust hood outlet diameter: 100 mm x 2 (4"x 2") Feeding motor: 1 hp with inverter Distance from blade to conveyor: 2-270 mm (5/64" - 10 5/8") Saw blade width: 50 mm (2") Saw blade length: 4980 mm (196") Saw blade speed: 25.4 M/s Conveyor belt size: 270 mm x 4200 mm (11" x 165") Feed speed (variable): 0-30 M/min (0-100 ft/min) Feed Conveyor Tilt: 30 Degrees Conveyor height from floor: 1016 mm (40") Saw wheel diameter: 700 mm (28") Blade lift servo motor: 0.5 hp
Equipment Location:Sterrett, AL
Smith Companies
205-620-4455 ext:111
Logosol PH260 Planer/Moulder, 4 Sided, Single Phase $6,000 570-262-4744
Equipment Location:Wapwallopen, PA
Carl Balliet Logging & Lumber
570-262-4744
S O L D
Weinig Powermat 500 Moulder With Chain deck and Roller Conveyor With Automated Pusher -5 Heads -#1: 15 HP Bottom -#2 & #3: 15 HP Side Heads HSK (1 brand new Fence side head) -#4: 20 HP Top -#5: 20 HP Bottom (new spindle) -Extra Tooling -Cutter Heads -Spacers -HSK Tool Holders -Rolls -Planer Heads -Roller Conveyor with Chain Deck & Pusher Conveyor -Dimensions: 12 x 20 roller conveyor w/ pusher -Chain deck: 144” x 142” (6 plastic Chains) All units are in excellent used conditioned. Fully functioning infeed/outfeed moulder line.
Equipment Location:Sterrett, AL
Smith Companies
205-620-4455 ext:111
STANDARD LISTINGS
ADOLF JOHN & COMPANY Model "FS IV" Automatic Guillotine with 126" Max. length cap., 3-7/8" cutting height. -- 0.5 HP motorized parallel fence, adjustable from 1" - 64", push button controlled travel with digital readout, micro-adjustment by hand wheel. -- 7" Wide hydraulic pressure beam with rack & pinion travel; 5.5 HP gear pump motor for pressure beam and knife cutting operation, approx. (2) Sec cycle time/cut; -- Complete with: (2) Palm buttons for safety. -- All Hydraulics were reconditioned in 2013, and used very little since.
Equipment Location:PACIFIC NORTHWEST, AL
EX-FACTORY INC.
704-841-2001
AEM Model 75-430 Wide Belt Sander;Specifications: 2-Head, 43" wide x up to 8" thick capacity. -- 1st Head: Quiet cut style drum - 25 HP. -- 2nd Head: 5" wide finishing platen - 20 HP. -- Pneumatic belt tracking, Abrasive belt size xx" x xx". -- Variable speed feed drive motor; powered open/close. -- Motor load meters. -- Front and rear lighting. -- Includes: Belt cart with (4) unused 150 grit belts and (2) unused 120 grit belts, extra parts and manual.
Equipment Location:ATLANTIC CDN
Joe Retzlaff
800-374-5009 ext:348
AEM 503-43 Wide Belt Sander (3) Heads -- 42" Width cap. Drum, Drum, Platen --Head Configuration: --1st Head: Rubber covered contact roll, 6" dia. (65 - 70 Duro), 25 HP motor. --2nd Head: Rubber covered contact roll, 6" dia. (60 - 65 Duro), 20 HP motor --3rd Head: 2-1/2" Wide finishing platen, 15 HP motor --Specifications -- 37" x 75" abrasive belts -- POSI-TRAK electronic tracking --Pneumatic belt tensioning --Double infeed & outfeed spring loaded holddown rolls -- 3 HP variable feed drive, 15 to 45 FPM, --Equipped with & Features -- 0" - 8" part thickness adjustment with PROSCALE digital readout -- (4) precision screw jacks. --Motor load meters and 21" infeed conveyor.
Equipment Location:SOUTHWEST
Joe Retzlaff
800-374-5009 ext:348

AEM 370 Sander

CDN$9,800
AEM 370 Wide belt Sander -- 1-Head, 37" width cap., combination sanding head with 4" dia. rubberized contact roll & 2" wide polishing platen; 20 HP motor. -- Abrasive belt size 37" x 60", with air tensioning, electronic abrasive belt tracking; -- 1 HP single speed conveyor, 0" - 8" opening with (4) screw jacks, double infeed & outfeed rubber covered holddown rolls. Complete with: -- Infeed conveyor extension, safety stop bar, load meter.
Equipment Location:EASTERN CDN
Ed Webb
800-374-5009 ext:377

AEM 501-37 Sander

Call for Price
Single 37" Head Combination Head with Drum and Platen Belt Size: 37" x 75" This machine is no longer needed at the current facility. Seller says everything is in working condition.
Equipment Location:NC
Carolina Machinery Sales, Inc
704-288-1904
ANDI SELEXX Series "BDT" with ATC and Boring; only 285 hours!4' x 8' Fixed table, moving gantry machine with a single-zone vacuum table. -- Equipped with:(1) 7.5 HP ISO-30 Type ATC spindle, air cooled, ceramic bearings, variable spindle speed from 1,000 - 18,000 RPM; 6-station automatic tool changer and 2 HP 6-spindle vertical drill bank (6 in Y-axis). -- Axis stroke:1,800 mm in X, 2,880 mm in Y, and 200 mm in Z-axis. -- Max. feed rate:50 MPM (1,950 IPM) in X & Y, 10 MPM (328 IPM) in Z-axIs. Equipped with & Features: -- Tool Length Measuring System (Tool Touch-off device). -- SYNTECH controller with network compatible WINDOWS PC based front-end, color monitor, keyboard, mouse. -- Full function hand held pendant, absolute & incremental programming, cutter & tool length compensation, feed rate & spindle speed override, inch/metric operation, and linear/circular & helical interpolation. Complete with: -- 10 HP BECKER Vacuum Pump. Tool holders collets and Light safety fences. -- Maintenance supplies (grease, grease guns), and full manuals & product literature.
Equipment Location:SOUTHEAST
Norm Schust
800-374-5009 ext:445
Comes with lots of extra parts, also comes with extra refurbished head which cost $8,000 to refurbish, or call and make an offer.
Equipment Location:Woonsocket, SD
605-350-4272
AES - EXTREME LINE 1325, ...Nested Base CNC Router with Loading and Unloading System:Description:4' x 8' Single-zone Stationary Aluminum Grid "MATRIX" table with Traveling "Bridge Gantry", Boring Head, ATC, and Auto Loading & Unloading SystemSpecifications: -- Working Field: X-Axis is 98.4" (2,500 mm); Y-axis is 51" (1,300 mm); Z-axis stroke is 7.8" (200 mm); max. material thickness of 5.1" (130 mm).Square grid pattern allows use of vacuum pods or closed cell rope gasketing material and use of spoil boards for "nested base machining". -- Positioning Speed: X- & Y-Axis 2,365 IPM (60 MPM), Z-axis at 780 IPM (20 MPM).YASKAWA Brushless, high torque AC Servo motor drives control on all axes.High precision "Rack & Pinion" system in X- & Y-axis & ground ball screw Z-axis.All components ride on THK precision profile linear guideways. -- Boring Unit: HSD" Drilling Head, 3 HP (2.2 kW), variable speed from 4,500 - 8,000 RPM motor. (10) Independent vertical spindles on 32 mm centers, (6) spindles in X-axis & (4) spindles in Y-axis.(6) Horizontal spindles with (2 + 2) in X-axis & (1 + 1) in Y-axis.(1) X-Axis grooving saw for max. 120 mm dia blade, variable speed from 5,500 - 10,000 RPM. -- Machining: 12 HP (9 kW) HSD Air cooled electro spindle with HSK F63 adaptor; variable spindle speeds from 1,500 - 24,000 RPM.(1) 12-Position ATC rotary tool magazine located at the back of the gantry and traveling with the X-Axis. -- Operator & Machine Control: OSAI Industrial PC Front-End with: Windows "7" operating system; 17" high resolution LCD flat-screen; ergonomic keypad; compatible with most CAD/CAM software in the market.Program & Data transfer via USB ports or downloading by wire is possible via serial port connections for RS-232, RS-242 & Ethernet adaptor. OSAI Control offers incredible list of functions from (a) auto-diagnostic to (z) zooming; controlled acceleration & deceleration, encoder feedback, dynamic tool correction via PLC due to active tool wear using space-and-time criteria. -- CAD/CAM Software: ALPHACAM "Essential" 2D CAD/CAM package, the most efficient and widely used CAD/CAM software in the woodworking industry, is included with machine. This package includes 3D Engraving and is Upgradable to full 5-Axis so it can grow with your business.ALPHACAM - As easy as you need it to be and as powerful as you want it to be. --System Includes: ● (1) Lifting Table with Automatic Indexing: Panel stack specifications: Max. panel stack height is 700 mm (27.55"), Max. panel stack weight is 4,000 kG (8,800 Lbs),Max. panel stack misalignment for X-Axis is 30 mm (1.18") & Y-Axis is 5 mm (0.19").The panel stack automatically indexes to the machine worktable height, allowing the loading unit suction cups to grip the top panel. ● (1) Workpiece Loading Unit with Suction Cups:Vacuum device with row of suction cups mounted on backside of gantry bridge grip the upper panel of the stack and move it up to the machine table support stops.Max. weight o
Equipment Location:MIDWEST, AL
EX-FACTORY INC.
704-841-2001
AES - Nova 1325, ...4' x 8' Nested Base CNC Router with ATC & Boring:Description:4' x 8' Single-Zone Stationary Phenolic Grid "Matrix" Table with Dual Driven Traveling "Bridge Gantry".Specifications: -- Working Field: X-Axis is 98" (2,500 mm); Y-Axis is 51" (1,300 mm); Z-Axis stroke is 8" (300 mm) Square grid pattern allows use of vacuum pods or closed cell rope gasketing material and use of spoil boards for "nested base machining". --Positioning Speed: X-Axis at 60 MPM (197 FPM), Y-Axis at 60 MPM (197 FPM), Z-Axis Speed 20 MPM (65 FPM), Z-Axis Stroke 200 mm (8").Yaskawa Brushless, high torque AC Servo motor drive control on all axes.High Precision "Rack & Pinion" system on X- & Y-axis with a ground ball screw on Z-Axis.All components ride on THK precision linear guide ways. -- HSD Boring Unit: 2.2 HP (1.7 kW) Drilling Head; Tool connections 10 mm collet, (9) Independent Vertical Spindles on 32mm centers, (5) X-Axis, and (5) on Y-Axis, maximum drill spindle speed 6,000 RPM. -- Spindle & ATC: 12 HP 9 kW HSD Air cooled electro spindle with HSK F63 adapter, variable spindles speeds from 1,500 to 24,000 RPM(1) 8-position Automatic Linear Tool Changer Rack. -- Operator & Machine Control: OSAI Open Industrial PC control with: Windows "8" operating system, 15.6” TFT colored LCD screen; ergonomic keypad; compatible with all CAD/CAM software on the market Program & Data transfer via USB ports or downloading by wire is made possible via serial port connections for RS-232, RS-242 & Ethernet adaptor.OSAI Control offers an incredible list of functions from (a) auto- diagnostics to (z) zooming; controlled acceleration & deceleration, encoder feedback, dynamic tool correction via PLC due to due to active tool wear using space-and-time criteria. -- CAD/CAM Software: ALPHACAM "Essential" 2D CAD/CAM package, the most efficient and widely used CAD/CAM software in the woodworking industry, is included with machine. This package includes 3D Engraving and is Upgradable to full 5-Axis so it can grow with your business. ALPHACAM - As easy as you need it to be and as powerful as you want it to be. -- Features: ● (1) BECKER 250 cbm/Hr Vacuum Pump ● Hand-Held Remote Control Pendant ● Automatic Tool Offset Unit ● Manual Lubrication Unit to 19 Central Lubrication Points ● Pneumatic Part Location Referencing Pop-up Pins -- Safety System: Safety enclosure around the spindle carriage; photocell safety sensors & perimeter fencing. -- Supplied with: Comprehensive technical documentation & manuals and covered by a 1 - year Parts and 6 - month Labor factory warrantyNOTE: EX-FACTORY has this AES machine under power & available for inspection at their Zeeland, MI Showroom!
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445
ANDI STRATOS SUP 5 X 10 CNC Router with ATC & Boring with only 473 hours:61" x 120" Vacuum table w/Phenolic resin top; axis stroke: X-axis is 120", Y-axis is 61" and Z-axis is 8"; fixed table - moving gantry. -- Equipped with:(1) 10 HP Router with oil mist lubrication, infinitely variable 1,000 - 18,000 RPM spindle speed, controlled by 13 KVA inverter; 8-position carousel type automatic tool changer with "ISO-30" tool holders. -- Boring unit:(1) (11) spindle boaring block with (9) vertical and (2) horizontal. -- All axes:Move on profile way bearing systems and are driven by precision ball screws with anti-backlash ball nuts for rapid feed-rates up to 945 IPM on the X- & Y-axis, 236 IPM on Z-axis. -- Control:FANUC "21i-mb" CNC Controller with: 9" CRT Screen display, RS-232 interface in separate free-standing control console. -- Controller features:Linear, circular & helical interpolation; automatic acceleration & deceleration, absolute & incremental programming, feed rate override. -- Complete with:Assorted tool holders and original documentation. Note: There is no vacuum pump included.
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445
AES - EXTREME LINE 1640, ...Nested Base CNC Router with Loading & Unloading System.Description:5' x 12' Single-zone Stationary Aluminum Grid "MATRIX" table with Traveling "Bridge Gantry", Boring Head, ATC, and Auto Loading & Unloading SystemSpecifications: -- Working Field: X-Axis is 157.48" (4,000mm); Y-axis is 63" (1,600 mm); Z-axis stroke is 7.87" (200 mm); max. material thickness 5.1" (130 mm).Square grid pattern allows use of vacuum pods or closed cell rope gasketing material and use of spoil boards for "nested base machining". -- Positioning Speed: X- & Y-Axis 2,365 IPM (60 MPM), Z-axis at 780 IPM (20 MPM).YASKAWA Brushless, high torque AC Servo motor drives control on all axes.High precision "Rack & Pinion" system in X- & Y-axis & ground ball screw Z-axis.All components ride on THK precision profile linear guideways. -- Boring unit: HSD Drilling Head, 3 HP (2.2 kW), variable speed 4,500 - 8,000 RPM motor. (10) Independent vertical spindles on 32 mm centers, (6) spindles in X-axis & (4) spindles in Y-axis.(6) Horizontal spindles with (2 + 2) in X-axis & (1 + 1) in Y-axis.(1) X-Axis grooving saw for max. 120 mm dia blade, variable speed from 5,500 - 10,000 RPM. -- Spindle and ATC: 12 HP (9 kW) HSD Air cooled electro spindle with HSK F63 adaptor; variable spindle speeds from 1,500 - 24,000 RPM.(1) 12-Position ATC rotary tool magazine located at the back of the gantry and traveling with the X-Axis. -- Operator & Machine Control: OSAI Industrial PC Front-End with Windows "7" operating system; 17" high resolution LCD flat-screen; ergonomic keypad; compatible with most CAD/CAM software in the market.Program & Data transfer via USB ports or downloading by wire is possible via serial port connections for RS-232, RS-242 & Ethernet adaptor. OSAI Control offers incredible list of functions from (a) auto-diagnostic to (z) zooming; controlled acceleration & deceleration, encoder feedback, dynamic tool correction via PLC due to active tool wear using space-and-time criteria. -- CAD/CAM Software: ALPHACAM "Essential" 2D CAD/CAM package, the most efficient and widely used CAD/CAM software in the woodworking industry, is included with machine. This package includes 3D Engraving and is Upgradable to full 5-Axis so it can grow with your business.ALPHACAM - As easy as you need it to be and as powerful as you want it to be. --System Includes: ● (1) Automatically Indexing Lifting Table - Panel Stack Specifications: Max. panel stack height is 700 mm (27.55"), max. panel stack weight is 4,000 kG (8,800 Lbs), max. panel stack misalignment for X-axis is 30 mm (1.18") & Y-axis is 5 mm (0.19").The panel stack indexes up to the machine worktable height, allowing the suction cups to grip the top panel. ● (1) Workpiece Loading Unit with Suction Cups - Vacuum device with row of suction cups mounted on backside of gantry bridge grip the upper panel of the stack and move it up to the machine table support stops.Max. weight of single workpiece to be loaded
Equipment Location:MIDWEST, AL
EX-FACTORY INC.
704-841-2001
AES - NOVA 1632, ...5' x 10' Nested Base CNC Router with ATC & Boring. Description:5’ x 10' Single-Zone Stationary Phenolic Grid "Matrix" Table with Dual Driven Traveling "Bridge Gantry".Specifications: -- Working Field: X-Axis is 126" (3,200 mm), Y-Axis is 63" (1,600 mm), and Z-Axis Stroke is 12" (300 mm).Square grid pattern allows use of vacuum pods or closed cell rope gasketing material and use of spoil boards for "nested base machining". --Positioning Speed: X-Axis at 60 MPM (197 FPM), Y-Axis at 60 MPM (197 FPM), Z-Axis Speed 20 MPM (65 FPM), Z-Axis Stroke 200 mm (8").Yaskawa Brushless, high torque AC Servo motor drive control on all axes.High Precision "Rack & Pinion" system on X- & Y-axis with a ground ball screw on Z-Axis.All components ride on THK precision linear guide ways. -- HSD Boring Unit: 2.2 HP (1.7 kW) Drilling Head; Tool connections 10 mm collet; (9) Independent Vertical Spindles on 32mm centers, (5) X-Axis, and (5) on Y-Axis; maximum vertical spindle speed 6,000 RPM. -- Spindle & ATC: 12 HP (9 kW) HSD Air cooled electro spindle with HSK F63 adapter, variable spindles speeds from 1,500 to 24,000 RPM(1) 8-position Automatic Linear Tool Changer Rack. -- Operator & Machine Control: OSAI Open Industrial PC control with: Windows "8" operating system, 15.6” TFT colored LCD screen; ergonomic keypad; compatible with all CAD/CAM software on the market Program & Data transfer via USB ports or downloading by wire is made possible via serial port connections for RS-232, RS-242 & Ethernet adaptor.OSAI Control offers an incredible list of functions from (a) auto- diagnostics to (z) zooming; controlled acceleration & deceleration, encoder feedback, dynamic tool correction via PLC due to due to active tool wear using space-and-time criteria. -- CAD/CAM Software: ALPHACAM "Essential" 2D CAD/CAM package, the most efficient and widely used CAD/CAM software in the woodworking industry, is included with machine. This package includes 3D Engraving and is Upgradable to full 5-Axis so it can grow with your business.ALPHACAM - As easy as you need it to be and as powerful as you want it to be. -- Features: ● (1) BECKER 250 cbm/Hr Vacuum Pump ● Hand-Held Remote Control Pendant ● Automatic Tool Offset Unit ● Manual Lubrication Unit to 19 Central Lubrication Points ● Pneumatic Part Location Referencing Pop-up Pins -- Safety System: Safety enclosure around the spindle carriage; photocell safety sensors & perimeter fencing. -- Supplied with: Comprehensive technical documentation & manuals and covered by a 1 - year Parts and 6 - month Labor factory warrantyNOTE: EX-FACTORY has this AES machine under power & available for inspection at their Zeeland, MI Showroom!
Equipment Location:MIDWEST, AL
EX-FACTORY INC.
704-841-2001
BACCI T4MO 4-Spindle Copy Lathe/Shaper w/Sanding. Capacity: (4) Spindle duplicating/carving/copy heads with (4) copy belt sanders for asymmetrical parts. Max. working height: 6.5" (165 mm), max length capacity 39.4" (1000 mm). -- Speeds: (3) carriage speeds: 3 IPM (75 mm/min)_up to 7.87 IPM (200 mm/min). Spindle speeds: 25 minimum to 42 maximum RPM. -- Features: Carriage feed motor 1 HP. Cutter drive motor 7.5 HP. Bell cutters 1.38" (35 mm), Minimum working radius 0.71" (18 mm). -- NOTE: Larger diameters are possible by using every second carriage position, ie. (2) heads instead of four heads.
Equipment Location:EASTERN CDN
Tony Cornacchione
800-374-5009 ext:432
Grutter Dato Blade Windstop Machine with (2) 10HP Motors & 3/4HP Gearbox
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Grutter Birdsmouth Rafter Saw
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
AES - EXTREME LINE 1632, ... Nested Base CNC Router with Loading & Unloading System:Description: 5' X 10' Single-zone Stationary Aluminum Grid "MATRIX" table with Traveling "Bridge Gantry", Boring Head, ATC, and Auto Loading & Unloading SystemSpecifications: -- Working Field: X-Axis is 125.98" (3,000 mm); Y-axis is 62.99" (1,300 mm); Z-axis stroke is 7.8" (200 mm); max. material thickness 5.1" (130 mm).Square grid pattern allows use of vacuum pods or closed cell rope gasketing material and use of spoil boards for "nested base machining". -- Positioning Speed: X- & Y-Axis 2,365 IPM (60 MPM), Z-axis at 780 IPM (20 MPM).YASKAWA Brushless, high torque AC Servo motor drives control on all axes.High precision "Rack & Pinion" system in X- & Y-axis & ground ball screw Z-axis.All components ride on THK precision profile linear guideways. -- Boring unit: HSD Drilling Head, 3 HP (2.2 kW), variable speed from 4,500 - 8,000 RPM motor.(10) Independent vertical spindles on 32 mm centers, (7) spindles in X-axis & (3) spindles in Y-axis. -- Spindle and ATC: 12 HP (9 kW) HSD Air cooled electro spindle with HSK F63 adaptor; variable spindle speeds from 1,500 - 24,000 RPM.(1) 12-Position ATC rotary tool magazine located at the back of the gantry and traveling with the X-Axis. -- Operator & Machine Control: OSAI Industrial PC Front-End with: Windows "7" operating system; 17" high resolution LCD flat-screen; ergonomic keypad; compatible with most CAD/CAM software in the market.Program & Data transfer via USB ports or downloading by wire is possible via serial port connections for RS-232, RS-242 & Ethernet adaptor; OSAI Control offers incredible list of functions from (a) auto-diagnostic to (z) zooming; controlled acceleration & deceleration, encoder feedback, dynamic tool correction via PLC due to active tool wear using space-and-time criteria. -- CAD/CAM Software: ALPHACAM "Essential" 2D CAD/CAM package, the most efficient and widely used CAD/CAM software in the woodworking industry, is included with machine. This package includes 3D Engraving and is Upgradable to full 5-Axis so it can grow with your business.ALPHACAM - As easy as you need it to be and as powerful as you want it to be. --System Includes: ● (1) Automatically Indexing Lifting Table - Panel stack specifications: Max. panel stack height is 700 mm (27.55"), max. panel stack weight is 4,000 kG (8,800 Lbs), max. panel stack misalignment for X-axis is 30 mm (1.18") & Y-axis is 5 mm (0.19").The panel stack indexes up to the machine worktable height, allowing the suction cups to grip the top panel. ● (1) Workpiece Loading Unit with Suction Cups - Vacuum device with row of suction cups mounted on backside of gantry bridge grip the upper panel of the stack and move it up to the machine table support stops.Max. weight of single workpiece to be loaded is 200 kG (440 Lbs), max. panel thickness is 30 mm (1.18"), min. panel thickness is 10 mm (0.39"), min. workpiece to be loaded 900 x 1,600 mm (35" x
Equipment Location:MIDWEST, AL
EX-FACTORY INC.
704-841-2001
AES - NOVA 1640, ...5' x 12' Nested Base CNC Router with Boring & ATC.Description:5' x 12' Single-Zone Stationary Phenolic Grid "Matrix" Table with Dual Driven Traveling "Bridge Gantry".Specifications: -- Working Field: X-Axis is 157.48" (4,000 mm) Y-Axis is 62.99" (1,600 mm) Z-Axis Stroke is 7.87" (200 mm).Square grid pattern allows use of vacuum pods or closed cell rope gasketing material and use of spoil boards for "nested base machining". -- Positioning Speed: X-Axis at 60 MPM (197 FPM), Y-Axis at 60 MPM (197 FPM), Z-Axis Speed 20 MPM (65 FPM), Z-Axis Stroke 200 mm (8").Yaskawa Brushless, high torque AC Servo motor drive control on all axes.High Precision "Rack & Pinion" system on X- & Y-axis with a ground ball screw on Z-Axis.All components ride on THK precision linear guide ways. -- HSD Boring Unit: 2.2 HP (1.7 kW) Drilling Head; Tool connections 10 mm collet, (9) Independent Vertical Spindles on 32mm centers, (5) X-Axis, and (5) on Y-Axis; maximum drill spindle speed 6,000 RPM. - . -- Spindle & ATC: 12 HP (9 kW) HSD Air cooled electro spindle with HSK F63 adapter, variable spindles speeds from 1,500 to 24,000 RPM(1) 8-position Automatic Linear Tool Changer Rack. -- Operator & Machine Control: OSAI Open Industrial PC control with: Windows "8" operating system, 15.6” TFT colored LCD screen; ergonomic keypad; compatible with all CAD/CAM software on the market Program & Data transfer via USB ports or downloading by wire is made possible via serial port connections for RS-232, RS-242 & Ethernet adaptor.OSAI Control offers an incredible list of functions from (a) auto- diagnostics to (z) zooming; controlled acceleration & deceleration, encoder feedback, dynamic tool correction via PLC due to due to active tool wear using space-and-time criteria. -- CAD/CAM Software: ALPHACAM "Essential" 2D CAD/CAM package, the most efficient and widely used CAD/CAM software in the woodworking industry, is included with machine. This package includes 3D Engraving and is Upgradable to full 5-Axis so it can grow with your business.ALPHACAM - As easy as you need it to be and as powerful as you want it to be. -- Features:● (1) BECKER 250 cbm/Hr Vacuum Pump● Hand-Held Remote Control Pendant● Automatic Tool Offset Unit● Manual Lubrication Unit to 19 Central Lubrication Points● Pneumatic Part Location Referencing Pop-up Pins -- Safety System: Safety enclosure around the spindle carriage; photocell safety sensors & perimeter fencing. -- Supplied with: Comprehensive technical documentation & manuals and covered by a 1 - year Parts and 6 - month Labor factory warrantyNOTE: EX-FACTORY has a similar AES machine under power & available for inspection at their Zeeland, MI Showroom!
Equipment Location:MIDWEST
Norm Schust
800-374-5009 ext:445