Woodworking Equipment For Sale

TAYLOR: 20-Section Clamp Carrier • 16-1/2' Width cap.; (12) clamps per section (240 approx. clamps total).• 32" Max. clamp opening; clamps with: 2-1/2" Jaw height.Complete with: -- Pneumatic torque wrench clamp tightening; pneumatic panel flattener; air drive carrier rotation.• Buyer will be responsible for: "Tear down" & "Loading!"

TAYLOR 40-SECTION Pneumatic Clamp Carrier;8.5' Width cap., (280 approx) clamps total with (6 to 7) clamps on every section, 32" max. clamp opening with 2-1/2" high jaws.Complete with: -- Pneumatic Clamp Tightener -- Pneumatic Flattener -- Air Rotation.Note: Tear down and loading not included

TECHNO CNC SYSTEMS - HD 60120 - 5' X 10' CNC Router with ATC: -- 60" x 120" CNC Router: Front to back configuration; 4-zone T-slot phenolic vacuum table. -- Axis travel: X-Axis 62"; Y-Axis travel: 120;" Z-Axis travel: 9" with 7-1/2" clearance. -- Drive System. Rack & Pinion on X-, Y- with: Ball screw; Z-axis; anti-backlash ball nuts. Drive System. Stepper motor controlled with: Up to 800 IPM travel; repeatability: +/-.003 inches. -- Spindle. (1) 12 HP "ATC" Type spindle with: Rear mount 8-position tool rack; fully programmable speeds from: 6,000 - 18,000 RPM. Includes: Vacuum Hood; collet wrenches; ER25 collets; cover nut. -- Control System. Micro stepper controller with: Brushless motors; easy to use handheld control pendant; compatible for G & M code Drive System. -- Includes: (1) 8.9 HP - BECKER VTLF 2.250 Vacuum Pump; assorted tool holders; manuals & documentation.

TEGLE & SONNER - Shaper: Single Spindle -- This machine is a tank of a shaper with: 5 HP Motor. -- Features: Foot brake for the main spindle. -- Spindle size: 1"; 5-1/2" under the nut.

TERCO NORTHSTAR 10-8 Spindle Carver.8-Spindle Carver with 10" center-to-center chuck spacing. -- (2) 0.5 HP - 3,450 RPM spindle motor direct "belt drives" spindles for 11,000 RPM rotation. -- 36" Long carving cap, with optional length extensions up to 72". -- Manual rotation for round parts. -- Operator manually traces the pattern details of the master with copying stylus. -- Capable of doing both base relief (flat backed) and 360° full round carving. -- Includes: (1) Set roughing bits, (2) sets finishing bits, tools, and manual.

MLS Number 11772789 2015 Thermwood FB53-510 CNC Router Very good working condition Moving gantry, fixed table, roller hold down CNC router Designed to machine low profile sheet materials(MDF, plywood, particleboard) Uses Microsoft Windows 10 Professional operating system

Thermwood C42 CNC Router (2) 5'x5' Tables It has 2 large routers, 4 smaller routers, and 2 aggregate heads in the turret Travainni Vacuum Pump Note from Seller: Includes two shaper heads that are not mounted into the turret and one pneumatic drill head that is not mounted into the turret. I also have one seat of Microvellum cabinetry program that I will transfer to you along with the purchase.

MLS Number 11772789 2015 Thermwood FB53-510 CNC Router Very good working condition Low hours. Used for only 1 year. Excellent condition Moving gantry, fixed table, roller hold down CNC router Designed to machine low profile sheet materials(MDF, plywood, particleboard) Uses Microsoft Windows 10 Professional operating system

5X10 table typewriter style tool changer at the head. 5 tools bar style tool change 4 tools c - axis at the head also for aggregate tools. 480V/60HZ

Thermwood C40 CNC Router 460V/3Ph 5'x5' Moving Table

THERMWOOD C67S 5-Axis CNC Router, ... Gantry TypeSpecifications & Features: -- Table: 10' wide x 5' deep moving table design with 5-axis with an aluminum table with 1" thick tool and jig plate. -- Head Travel & Rotation: X-Axis (table travel) is 124", Y-axis (gantry travel) is 62", Z-axis is 36", rotational axis = 360°, tilt axis = 270°. -- Spindle PERSKE: Equipped with (1) 7.5 HP, "Quick Change" Electrospindle with ISO 30 adaptor (no tool changer), (3,000 - 18,000 RPM) with solid-state inverter, -- Lead Screw: With compensation for correcting pitch tolerance, zero-backlash ball nuts, high performance AC Servo drive system with feed speed up to 900 IPM; automatic lubrication system.Controls: -- THERMWOOD "91000 Super Control" version 5.05 software controller, programmable spindle speed option, compatible with major CAD/CAM and offline CNC programming systems; Automatic tool length sensor; Stand-alone, air-conditioned control cabinet.

THERMWOOD CS45-510 5' x 10' CNC Router with ATC:The CS45-510 machine is a complete nested based CNC Routing System for machining cabinet boxes, custom furniture and support products. -- Equipped with: (1) 12 HP “HSD"; 3,000 to 24,000 RPM programmable variable speed router mounted to a servo-controlled Z-axis. -- (7) Positions wine rack tool changer rack. -- Machine: The "CS45-510" is a moving gantry, fixed table, CNC router. All axes are equipped with high efficiency ball screw drives providing feed rates up to 1,200 IPM. -- All linear axes ride on precision ground and hardened trackways with precision bearings. The machine base and bridge structures are heavy duty weldments designed to provide long term performance and reliability. The machine base is configured with steel mounting pads and leveling bolts. -- Control System: The "Thermwood QCore SuperControl" features a 19" wide full color LCD touch screen monitor, QWERTY keyboard, 1 TB SATA hard drive. It also includes a serial port for handheld programmer interface, variable 0 to 120% feed rate override and operator controls for start, stop, axis jog +, axis jog -, block step +, block stop - and feed hold. The control provides PCI bus expansion slots and is compatible with most Local Area Networks (LANs) as well as a variety of peripheral computer devices. -- The control uses a Microsoft® Windows® 7 Professional operating system. -- High-performance closed loop SIEMENS AC Servo drives on all axes. A network connection to the machine control with access to a high-speed Internet connection is required to use Virtual Service. -- Complete with: (1) BUSCH R5 vacuum pump. Portable handheld programming unit, auto lubrication, tool touch off, and manuals.

Equipment located in Raleigh, NC. 2023 TigerStop TigerSaw Miter XL Digital Push-Feed Upcut Miter Saw System, Infeed & Outfeed Tables w/ Back Fence, S/N: 2332986 All equipment is sold “As Is, Where Is”. Reasonable offers will be considered. Can be inspected by appointment only. Please reference RTR# 6083693-01 All offers, including offers at the asking price are subject to review and acceptance by our client. Prices are subject to change without notice. There is a eight percent transaction fee on every invoice. For a complete description of our Terms of Sale, please contact an RTR Sales Representative. Stock# RTR# 6083693-01 Contact Info: RTR Services Inc. 1-800-238-3294

Timesavers 2300 3-Head Wide Belt Sander Seller’s Specifications: Three Head Wide Belt Sander - 43? Wide - Model #: [2331-24-001](tel:2331-24-001) - Year of Manufacture: 2008 - Abrasive Belt Size: 43? x 75? - Main Motors: 25,20,15HP - Max Width Stock: 42? - Max Part Length: 15? - Max Thickness Opening: 5? - Infeed Loading Area: 14? - Feed Speed: 15-45 FPM - Voltage/Phase/Frequency: 460/3/60 - Full Load Amps at 460V: 93 - Motor Type: TEFC - Passline Height: 33? – 38? - Dust Extraction: 4,500 CFM (5? static pressure) - Compressed Air Usage: 6 CFM @ 90 psi - Auto Panel Thickness Adjustment

Timesavers Single Head Sander Combination Head Model 2311-45-6 Includes transformer

Timesavers Model 2321-24-01 Sander 43"x75" Belts 2-Head IceClean System on each head

TimeSaver Mdl 325-2 36" Wide Belt Sander S/N 7887

Timesaver Mdl 337-6 36" Belt Sander S/N 18395

Only 697 hours, taken from service (2) top heads - one orbit, one brush (1) 3HP main orbit motor (1) 3HP feed motor (1) 1HP brush motor (1) 1HP oscillation motor 460V Max. stock width 36" Max. thickness 6" 32-38" variable passline height 2,000 CFM @ 5,000 FPM exhaust air requirements

TIMESAVERS - 2321-23-21: Planer Sander (2) Heads2-Head; 36" width cap.Specifications -- 1st Head. 6" Dia. Helical head with: (6) Spirals of 4-sided carbide inserts; 25 HP motor. -- 2nd Head. Combination head with: 5-1/2" Dia. contact roll and 2-1/2" wide finishing platen; 20 HP motor; sanding head with 37" x 75" Abrasive belt with "POSI-TRAK" electronic tracking. -- Dial indicators for height adjustments. -- Conveyor belt feed with Variable feed speed 20 - 45 FPM; automatic conveyor belt tracking. -- Anti-kickback fingers on infeed; planer head with sectional infeed shoe and double hold-down rolls on outfeed; double infeed and outfeed rubber-covered hold-down rolls on the sanding head. -- Motorized part thickness adjustment: 0" - 5" With mechanical digital readout. -- Minimum part length: 15"; Pass line height: 33" - 38". Complete with: -- Controls mounted on belt loading side; air activated caliper disc brakes on all heads; load meters for each head; 14" infeed loading area. -- Dust extraction: 3,500 CFM; compressed air usage: 3 CFM @ 90 PSI. -- Total load amps at 230 Volts: 145 Amps.