Woodworking Equipment For Sale

JLT CLAMPS 717C-CHBB Double Door Miter ClampAccurately clamp, square and adjust your miter joints with JLT large miter double door clamp. The “CH Big Boy"; Door Clamp has quick changeovers, protects MDF doors, has accurate corner pressure adjustment and with removable center bars. Specifications: -- Dial regulators: “Dial"; pressure A, B, C, D IN or OUT for adjustment of corners. -- Includes (2) vertical and (2) horizontal clamps. -- Maximum capacity: 38"; W x 96"; L. -- Installed center bar: (2) 30";W x 46";L. -- For use on stile and rail doors as well. -- Single lever valve air activation.

JLT Clamps 812B-M1-3.5J-40L-H-R DOOR AND PANEL CLAMP40" Capacity clamp (min 8-1/2") Patented Equalizer Design Provides Equal Clamping from the Front and Rear Jaws, Resulting in a Higher Quality Panel. #302 Style Clamp with Standard 3-1/2" High Jaws for Increased Durability and Less Clamps Per Glue Up.Replaces #302 Style Clamp

JLT 79F-12-PC Multi Level Panel Clamp12' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (6) clamps per level (a total of 30) manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw.Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,500 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,200 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,350 -- Clamp 3 1/2" X 40" opening ... $ 149 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 144" x 78" x 52" high

JLT 79F-16-PC Multi Level Panel Clamp16' Wide, free-standing Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (36) clamps total manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps # 302-40-H-R with 40" opening with a 3-1/2" high x 4" wide jaw. -- (1) Fastener and shim kit for precise clamp alignmentAvailable Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,500 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,200 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,350 -- Clamp 3 1/2" X 40" opening ... $ 149 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbs -- (72) # 80-1706 Rocker adaptor plates for up to 4- 6" thick glue stock $28 each (2 required per clamp)Floor space requirement: 16' x 52"W x 70" high

JLT 79F- 6-PC Multi Level Panel Clamp6' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (8) clamps manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw. (52" clamp available upon request)Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,500 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,200 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,350 -- Clamp 3 1/2" X 40" opening ... $ 149 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 75" x 70" x 48" high

JLT 79F-8-PC Multi Level Panel Clamp8' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (18) clamps manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw.Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,500 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,400 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,650 -- Clamp 3 1/2" X 40" opening ... $ 149 -- 79-1680-Handle $140 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 100" x 70" x 48" high

JLT 79F-12-PC Panel Rack ClampSpecifications: -- 12' Wide, free-standing Clamp Rack unit, 12' wide x 40" deep. -- Equipped with: (5) Levels for mounting clamps; (6) clamps per level (a total of 30) manually adjusted- side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 5" wide jaw.

JLT Panel Pro Clamp Model 78D-5-S 5-Levels with (6) clamps each with panel flatner 110 v Single phase Will do 80”x 40”

JLT CLAMPS 78H-12-42-40 Mini Pod PressSingle section 12" wide x 42" long cap., 40" max. opening, 13" daylight, 30 ton max.,clamping pressure at 120 PSI, Pod Press is powered by a total of (18) 20 square inch diaphragm cylinders, upper platen has a 2" stroke when air is activated.Features: Heavy duty upper and lower steel platens, single lever valve pneumatic operation with dial regulator pressure controls, stack multiple wood components up to 12" wide and ships pre-assembled. Includes: Manual jack for platen adjustment.

This Pneumatic Vertical Clamping System features upper and lower 12" wide and up to 42" long steel platens for face gluing a variety of solid wood components. With its modular design with each section having its own pressure control and 40" opening, 13" daylight. -- 12" Deep x 42" long clamping cap. -- Air operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.

JLT 78H-16W-84L-40H-M4 Pneumatic Pod Press w/adjustable Opening.Specifications: -- Pneumatic Vertical Clamping System features upper and lower 16" wide and up to 84" long steel platens for face gluing a variety of solid wood components. -- Powered by a total of (18) 20 square inch diaphragm cylinders. -- With it's modular design each section has its own pressure control and 40" opening. -- 16" Wide x 84" Long x 40" High with fixed clamping opening with 1-1/2" adjustable increments. -- Air-operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.

JLT 78H-16W-42L Mini Air Pod PressThis Pneumatic Vertical Clamping System features upper and lower 16" wide and up to 42" long steel platens for face gluing a variety of solid wood components. With its modular design with each section having its own pressure control and 40" opening, Specifications: -- 16" Deep x 42" long clamping capacity. -- Air-operated assembly, for face gluing of engineered stiles & rails, kickers, headers, and many other solid wood applications. -- Single lever valve operation with dial regulator pressure controls for quick & accurate clamping pressure. -- Up to 30 Ton max. clamping pressure @ 120 PSI.

Cuts with a 16" carbide tipped saw blade 240V/480V 3 phase 7-10 seconds per cycle

(2)Jones Superior Machine No 54T Band Saws

KAESER KCF 200 Oil/Water Separator Specifications: Cap. for Screw Compressors: 900 SCFM for Mineral/Turbine oil (Additive free), 600 SCFM for Diesters PAO, & 450 SCFM for Polyglycol. Cap. for Piston Compressors: 600 SCFM for Mineral/Turbine oil (Additive free), 450 SCFM for Synthetic oil. Filling volume 19.2 Gallons. Max. operating pressure 232 PSIG. Equipped with: 30.5 Gallon Container. 4.9 Gallon Pre-filter, 5.4 Gallon Main filter. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

KAESER ASD 40 T 40 HP Rotary Screw Air Compressor, with Integrated Dryer & 17,702 Run & 3,775 Load Hrs (as of 2/16/24) Specifications: Rated cap. 191 CFM. Max. pressure 125 PSIG. Equipped with: 40 HP - 3,570 RPM TEFC Direct drive motor, IE3 (Premium Efficiency). "SIGMA PROFILE" Air end. 1:1 Motor-air end coupling. Wye-Delta reduced voltage magnetic starter. Electronic Thermo-Management (ETM) system. 2-Stage 4 micron air intake filter, with Cyclone pre-separation & replaceable element. Safety pressure relief valve. Anti-vibration mounts. Sound enclosure. KAESER "SIGMA CONTROL 2" PC-Based controller, with LCD Display & Touchpad. Complete with: Integrated Refrigerated Dryer. Compressor Operator Manual & Controller User Manual. Dimensions for this Specific Machine: 70" x 36" x 61" H. Weight for this Specific Machine: 750 kG (1,650 Lbs). CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

Year: 1999 Fully automated door lite cutting system for high volume production. Equipped with: Handler automatic door loader draws from two door stacks, – DL-NCA programmable automatic door lite cutter – Dual heads for quick change between steel and fiberglass, – EP-1 automatic edge prep machine bores for latch and mortises faceplate pocket.

KVAL COMMANDER Pre-Hung Door Machine/Door Line. Automated Cylindrical Lock and Hinge Machine for Pre-Hanging Interior & Exterior Doors; for doors Up to 2-1/4" thick x 4' x 9'; Routes, makes a 3° bevel on one side of the door edge. -- Traveling hinge router stops at each collar on the index shaft and tilts into approx. 3-1/2" to 5-1/2" hinge pocket on square or bevel doors. -- Selector switch allows sequencing for (2 - 3 or 4) hinges, 1/4" or 5/8" corner radius, and door/jamb or door only machining. Turret stops determine hinge size. -- Hinge index bar with embedded scale can be interchanged with other pre-set index shafts for rapid hinge center adjustments, or collars can be adjusted along the scale. -- Heavy Duty lock section features 5 HP face bore, 3 HP latch bore and 1.5 HP plate router; adjustable for 2-1/4" - 5" back-sets with self-centering clamp system for faceplate & latch hole; plate router adjusts for square or beveled face plates up to 12" long. -- Jamb clamps front load for easy handling self-adjust; there is no jamb width limitation. -- This machine can produce 250 or more doors per shift, including lock prep and hinge mounting to the door and hinge jamb.

KVAL, INC. - THE COMMANDER: Door Line with KVAL 555: Door Sizer/Beveller. Used package consists of: -- KVAL COMMANDER Prehung Door Machining Center. -- NORFIELD Door Loader (Shared with adjacent NORFIELD 5000.5001/5002) -- KVAL 555 Door Sizer.NOTE: The following information/specifications are provided for reference & needs to be verified by Buyer prior to Purchase.Automatic Cylindrical Lock & Hinge Machine for: Prehanging interior & exterior Doors; for doors up to: 2-1/4" thick x 4' x 9'; routes & predrills for up to: (4) Radius hinges on bevel doors. -- Traveling hinge router stops: At each collar on the index shaft; tilts into dapp: 3-1/2" - 5-1/2" Hinge pocket on square or bevel doors. -- Microprocessor control allows: Selector switch sequencing for (2 - 3 or 4) hinges; 1/4" or 5/8" corner radius; door/jamb or door only machining.Turret stops determine hinge size. -- Hinge index bar with: Embedded scale can be interchanged with other preset index shafts for rapid hinge center adjustments; or collars can be adjusted along the scale. -- Heavy-Duty lock section features: 5 HP Face bore; 3 HP latch bore; 1-1/2 HP plate router; adjustable for 2-1/4" - 5" back-sets with: Self-centering clamp system for: Face plate & latch hole; plate router adjusts for square or beveled face plates up to 12" long. -- Jamb clamps front load for: Easy handling self-adjustment; there is no jamb width limitation. -- KVAL - 555 Door Sizer/Beveller. Single-sided feed through unit: (1) Vertical spindle with: 5 HP Main motor; spindle tiltable from: 0° - 3-1/2° for bevel edging of door; feed system with: Overhead feed rollers; fence line adjustable from: 12" - 48".NOTES -- All equipment as taken from service. -- Does not include: Setup, installation, or freight. - Available at additional cost. -- Photos describe the machinery as it was removed from service & not in reconditioned form. -- This equipment was installed adjacent to a Norfield 5000/5001/5002 sharing a common Norfield Loader. See DM-010596

KVAL FACE CNC Entry Door Router/Drill/Mortiser for Architectural Doors.KVAL CNC and drill for mortise lock function holes, viewers and routed pockets necessary for exit devices and card locks. Features: -- Four PERSKE high frequency routers, (2) mounted above the door and (2) below. All holes larger than 3/8"; are routed either into the door face for half holes, or through both sides for through holes, with the bits almost touching in the middle of the bore. This eliminates any danger of tear-out on the door face. -- ATC for Router tooling. Axes/Drives X, Y, Z, U, V and W. GALIL Motion Controllers. -- Controller accepts many input parameters, for example: Locks Definition/Shape Definition; T-Strike; Cylindrical -Rectangular -Flushbolt. Face Lock Group: Face Hole, Face Rectangle, Face Special; DOORLITE Hole: Rectangle, Doorlite Special, Cylindrical for Architect or Commander . Machine foot print is 10' x 4' (crated dims 82"W x 178"L x 77"H). Ship weight 5,000 Lbs.