Woodworking Equipment For Sale

GANNOMAT - INDEX 130 LOGIC: CNC Bore, Glue & Dowel Inserter -- SpecificationsGANNOMAT "INDEX LOGIC": CNC Controlled Point-to-Point Drilling/Gluing/Dowel Insertion Machine for variable programming of boring patterns. -- "X", "Y" & "Z" Axes set by manual digital indicators. -- Working Width1,300 mm (51") x 3/4" - 7-3/4" Width x 1/2" - 3-1/8" material thickness with: (4) Independent working zones & LH/RH (mirror image).Table size: 4-1/2" x 52-3/4" x 35" H with 9" x 52" extension. -- (8) Vertical hold-down cylinders & zero center stop for horizontal part processing. -- Dowel Driving & Horizontal Boring: Integrated into (1) station; dowel driving unit is located alongside the boring station; both units are mounted on (1) support. -- Horizontal Boring Station. Head can be setup for: 6 - 8 or 10 mm, Dowel length from 25 - 50 mm (currently setup for 8 mm dia. x 50 mm long dowels). -- Doweling Station: Vibrating hopper; insertion head & dowel driving with air impulse; glue valves are controlled individually at the control cabinet; central adjustment for the amount of glue by means of a digital timer. -- Operator Interface: MS-XP & GANNOMAT Production software; 15" color touchscreen monitor interface; USB drive; bar code capable. -- Controller & Drive: BECKHOFF "C3620 TWINCAT V2.10". -- Complete with: (1) Glue tank; (1) water tank; auto lubrication system; all original manufacturer's machine documentation. -- Actual Model: GANNOMAT INDEX 130 LOGIC

Gau Jing GS-623 Moulder 6 Head 460V 3ph 60hz Good Running Condition Recently Removed From Service

GENERAL - 350 10", ...Tilting Arbor Table Saw with: 5 HP Motor & Rip FenceSpecifications: -- Table size: 20" LR x 28" FB x 34-1/2" H. -- Arbor dia. 5/8"; tilt 0° - 45° to right; blade speed: 4,000 RPM. -- Max. depth of cut: 3-1/8" at 90°; 2-1/8" at 45°; max. width of dado cut 13/16". -- Max. rip cap.: 52" Right.Equipped with: -- 8" Left & right table extensions. -- 5 HP Motor.Complete with: -- DELTA "Unifence Saw Guide"; 43" L x 3-1/2" H Rip Fence System. -- Blade Guard. -- Miter Gage.

GIARDINA DUALTECH 605 Automatic Reciprocating Sprayer:System includes: -- In-feed roller conveyor with panel reading/detection 60-cell photodiode bar to monitor and regulate spray application, further maximizing application transfer efficiency. -- (2) Reciprocating trolleys with spray gun supports, and adjustable speed, providing a consistent speed and pattern across entire conveyor width. - Each trolley to carry (4) adjustable guns on each head (8 guns total). -- Two (2) coating circuits, suitable for solvent and water-based coatings. -- Motorized height adjustments of spray gun supports. -- Spray guns are independently adjustable in inclination; and manual adjustment. -- Through Feed Conveyor: Max. working width of 1,300 mm (51"), variable speed adjustable by means of an inverter. -- Synthetic Belt Conveyor: Ring-closed by means of an "overlapped" joint and with solvent-resistant surface treatment.Features: -- Total recovery of the lacquer deposited on the belt and cleaning of the belt with the possibility of reusing it in the spraying circuit. - Rapid repositioning of the conveyor belt system thanks to the special design of the frame. -- Air exhaust system and separation of the solid content from the air by means of two (2) suction boxes located on the two sides of the conveyor, equipped with high-efficiency twin Dry-Filters. The filtered air is exhausted to the outside by means of a centrifugal fan. -- The Enclosure Booth is made with structural irons and coated sheet steel panels. -- Control and set-up of the work parameters by means of a PLC located on a pivoting arm mounted to the machine.NOTE: Is being "Cleaned, checked and Serviced" by on of the most experienced Finishing Equipment Technician!

Giben K305 Edgebander Manufacturer specs (to be confirmed): Standard Configuration Panel Thickness: 10~60mm Edge Thickness: 0.4~3mm Motor Power: 2.35Kw Maximum Curve Radius: 20mm Cutter Maximum Range: 50mm Working Pressure: 0.6 MPa Outline Dimension: 960 x 950 x 1000mm Gross Weight: 280Kg Voltage: 220-480V

GIBEN - KG-320, ...Edgebander (Compact)0.4 - 3 mm Edge thickness capacity min. panel width 80 mm; panel thickness 10 - 60 mm; variable feed speeds: 12 - 20 MP; electronic adjustment of the upper pressure beam.Equipped with: 2 KG Glue pot & adjustable pressure roll section with: (1) Driven roller and (3) idler rollers.Workstations -- 2-Motor end Trimming Unit. -- Top & Bottom radius Fine Trim Station. -- Top & Bottom Buffing Station.Complete with & Features: -- Programmable PLC Control. -- Sound cabin for all workstations. -- Adjustable outboard panel support.

Giben Panel Saw

GIBEN - SMART 75 SP: Front-Load, Automatic Panel Saw: -- Specifications149" (3,800 mm) Overall cutting length; 131.8" (3,350 mm) pull back 2.95" (75 mm) max. blade projection.15 HP (11 kW) Main & 1.5 HP (1.1 kW) scoring motor; 3,800 RPM main saw blade; 6,000 RPM scoring blade with external adjustment. -- Saw CarriageVariable saw carriage forward speed: 16 - 164 FPM (5 - 50 MPM); return speed: 197 FPM (60 MPM).Rack & pinion drive; driven by AC brushless Servo motors. -- Pusher FenceElectronically controlled overhead program fence with: (7) Pneumatic gripper clamps; max. clamp opening: 2.56" (65 mm).Variable forward pusher speed: 2-1/2 - 82 FPM (0.8 - 25 MPM); return speed: 131 FPM (40 MPM).Pusher driven on round bar-ways by AC brushless Servo motors. -- Operator & Machine ControlPC Front-End with: Windows "XP" + "Pentium" processor Operating System with: Multitasking & easy programming of very complex cutting patterns.15" CRT Monitor displays: REAL TIME Graphics of cutting dimensions & patterns; program cutting list; manual cuts; diagnostic & online help.Data input by adjustable keypad pendant; standard industrial: Keyboard, mouse & CD-ROM drive; direct downloading from office PC is possible."MOELLER" PLC Guarantees full management of all machine movements (pressure beam; saw carriage; side aligner pusher positioning, etc.).The numerical control: Adjusts the optimum saw blade projection for the stack of panels being cut; sets the most appropriate cutting speed in relation to the stack itself (when necessary to the width of trim cut, too.) -- Rear of Machine(9) Rear support rails with: 80 mm Dia. roller modules; rear of machine enclosed for safety. -- Front of MachineAutomatic side/crosscut aligning device with: 2.4" - 48" (60 - 1,220 mm) stroke; 90" (2,300 mm) long crosscut fence (front-to-back).(1) Front-mounted air floatation table: 20" x 78" (510 x 2,377 mm) & (3) front-mounted air floatation tables: 20" x 60" (510 x 1,524 mm). -- Complete with:G-Lock "Quick Change" saw blade system. -- Actual Model: GIBEN SMART 75 SP.

GIBEN PRISMATIC 2 H 100 SPT REAR LOAD, AUTOMATIC PANEL SAW: -- Specifications:177" (4,500 mm) Overall cutting length; 3.9" (100 mm) max. saw blade projection; 17.70 HP (13.2 kW) main saw motor, 15.75" (400 mm) dia., (3,960 RPM) main blade; 3-1/2 HP (2.6 kW) Scoring saw motor, 8.4" (215 mm) dia., (6,095 RPM) scoring blade. -- Saw Carriage:Travel speed 3 - 328 FPM (1 - 100 MPM), 328 FPM (100 MPM) constant return, powered by Inverter drive. -- Pusher Fence:Programmable pusher fence with (8) material gripper clamps (open to 4.6" / 117 mm);Pusher speed 3 - 197 FPM (1 - 60 MPM), return 197 FPM (60 MPM); powered by AC Servo motor on Rack & Pinion system. -- Operator & Machine Control:PC Front end with color monitor & DATAMAX-O'NEIL "E-Class Mark II" Compact thermal barcode label printer. -- Rear Lift Table:4-Column rear load lift table with loading from the rear of the machine; max. panel size 177" x 63" (4,500 x 1600 mm);Lift table stroke 32.7" (830 mm); max. stack height without pit or risers 27" (680 mm).4.8 HP (3.6 kW) motor for Raise & lower; raise & lower speed 2.3 FPM (7.5 MPM); (2) material front aligners located behind the cut line.0.31" (8 mm) minimum thickness for automatic loading from the rear lift table -- Complete with:Modular rear machine table with non-marking rollers on (28) rails; Pneumatic side alignment w/automatic pre-positioningParametrically controlled saw carriage automatically adjusts the cutting height & speed according to the cutting patternSafety photocell barrier for direct loading from the rear to avoid the possibility of a collision between lift truck and pusher (5) Air floatation tables 79" x 20" (2,000 x 510 mm); Front safety flaps on the pressure beam; safety fencing rear & side of machine; 10" Risers. -- Actual model is PRISMATIC 2 H 100 SPT.

GIBEN G2 GENESIS 48 CNC ROUTER (ATC & BORING): 4' x 8' Fixed table; moving gantry machine with: Single zone vacuum table. -- Equipped with:(1) 12 HP, ANDI HSK-63F ATC spindle; air-cooled; ceramic bearings; variable spindle speed from: 6,000 - 24,000 RPM. -- 6-Station Automatic Tool Changer & 2 HP 9-spindle vertical drill bank (5 in X- & 4 in Y-Axis). -- Axis Stroke1,300 mm (51") In Y-Axis; 2,500 mm (98.4") in X-Axis; 200 mm (7.8") in Z-axis. -- Max. Feed Rate60 MPM (2,362 IPM) In X- & Y-axis; 30 MPM (1,180 IPM) in Z-axis. -- FeaturesTool Length Measuring System (Tool Touch Off device). -- ControlANDI/SYNTECH Controller with: Network compatible WINDOWS PC based front-end; color monitor; keyboard; mouse.Full function handheld pendant absolute & incremental programming; cutter & tool length compensation; feed rate & spindle speed override; inch/metric operation; linear/circular & helical interpolation. -- Complete with:10 HP BECKER Vacuum Pump; Tool Holder’s collets; Light safety fences. -- Maintenance supplies: Grease, grease guns; full manuals; product literature.

GIBEN - G4 EVO 510: CNC Router ATC & Boring: + Infeed, Rake & Offloading -- Specifications 5' x 10' "Matrix" grid Phenolic surface for "Nested Base Manufacturing". -- Working CapacityX-Axis 126" (3,200 mm); Y-axis 62.9" (1,600 mm); Z-axis stroke is 9.8" (250 mm); max. material thickness 4.7" (119 mm). -- Positioning Speed• X- & Y-Axis 262 FPM (80 MPM); Z-axis 98 FPM (30 MPM).• X- & Y-Axis use: Precision Rack & Pinion system; Z-axis uses precision ball screws.• All axes movement is on precision linear guides & ways and controlled by digital, brushless AC Servo motors.• All motion components are maintained by an automatic Lubrication System. -- Work Area• Flat table design with: "Matrix" grid phenolic surface for "Nested Base Manufacturing".• (2) Side clamps + (4) external pneumatic pop-up stops for piece positioning at (4) corners of workstations; automatic NC controlled 8-zone vacuum table.• Prepared for (optional) "quick fit" vacuum outlets for optional clamping of small or awkward shaped parts; with: "Quick Connect" vacuum outlet for custom vacuum pods & fixtures. -- Boring Unit• (1) 2-1/2 HP (1.7 kW) Motor; variable speed: Up to 6,000 RPM; "HSD" Boring unit.• (16) Independent vertical spindles with: (9) In X-axis & (7) in Y-axis. -- Machining• (1) 15 HP Air-Cooled "ANDERSON" Electrospindle with: HSK F63 Adaptor; RH & LH rotation; variable speed from 1,000 - 24,000 RPM.• (1) 8-Position ride-along ATC tool changer for "on the fly" ATC. • NC Controlled "touch off probe" tool presetting for the measurement of the tool length. -- Operator & Machine Control• PC Front-End with: ANDI/GIBEN "SYNTEC" + "WINDOWS" Operating System.• 19" LCD Flat screen monitor; server; full keyboard; mouse: All mounted on a mobile cart.• Intel(R) Core i CPU; 8 GB RAM memory; 500 GB (SSHD) hard disk; dedicated graphic card; DVD reader; USB ports; Ethernet card for network connection capabilities. • Automatic program update according to the tool length (touch off probe). -- Equipped with: • (2) 250 m³/Hr (9 HP) "BECKER" vacuum pumps • Automatic Lubrication system for: Linear guides, pads, & recirculating ball screw • Teleservice capabilities • Perimeter safety light bars & perimeter fencing • Manuals & Documents on CD. -- Options Include:• (1) NC Controlled infeed Scissor Lift table • (1) Vacuum loading device • (1) Rake system • (1) NC controlled & powered belt outfeed table with vacuum sweeping system. -- Actual Model is: GIBEN - G4 EVO 510

GIBEN - WIBJ-5: CNC Machining Center -- SpecificationsAutomatic CNC through-feed Point-to-Point Boring Machine that combines flexibility & high productivity.Perfectly suited solution for small to mid-size companies & artisans in need of: Automatic solution for precision drilling with a low-cost investment.Parts can be discharged at the opposite end of the machine for automated material handling or returned to the Operator for manual unloading. -- Working FieldMax. panel size: "X" Axis: 98.4" (2,500 mm); "Y" axis: 33.4" (850 mm); "Z" axis: 2.3" (60 mm).Min. panel size "X" axis: 7.9" (200 mm); "Y" axis: 2.8" (70 mm); "Z" axis: 0.39" (10 mm). -- Positioning Speed"U-Axis" Panel feeding speed: 197 FPM (60 MPM); "X" & "Y" axis: 197 FPM (60 MPM); "Z" axis: 49 FPM (16 MPM).Axes positioning by: AC Drives & brushless motors; the "Panel" moves in "X" axis & the "Machining Units" move in "Y & Z" axis. -- Work AreaNC Controlled "Optical Material Sensor" creates: “0“ Panel reference point by reading the panel's ends; ensures: RH & LH (mirror image) panels will always be symmetrical.Fixed RH ("U" Axis) panel clamping device with: Automatic panel adjustment according to the programed information.LH Side pressure clamp with: Automatic adjustment & pneumatic locking according to the panel width.Scratch resistant idle rollers for: Panel positioning from the bottom & sides. -- Boring Unit2 HP (1.5 kW) - 4,800 RPM Motor; (12) independent vertical spindles with: (6) In "X" axis; (6) in "Y" axis.(6) Horizontal spindles with: (2 + 2) in "X" axis; (1 + 1) in "Y" axis; (1) 4,200 RPM "X" axis grooving saw with: Max. 120 mm di. blade.Max. dia. of horizontal drill bits: 12 mm; Max. dia. of vertical drill bits: 35 mm; max. drilling depth: 43 mm -- Machining(1) 5 HP (3.7 kW) electrospindle Router with: ER 25 Collet adaptor; variable speed from: 1,000 - 18,000 RPM; 16 mm max. tool dia. -- Operator & Machine Control: User friendly; icon driven; fully parametric control housed on: Control console mounted to the machine base.17" LCD Display; keyboard & mouse with: Network card & USB; displays: Programming graphics; functions; machine data; subroutines.Capable of running production while programming & editing. -- Complete with:User's & maintenance manuals. -- Actual Model: GIBEN WIBJ-5.

GoFast Bandsaw $1,500

GOMAD - DFFA-5: Tilting Arbor Shaper Specifications -- 40" x 39" Table size. -- Spindle tilts from: 10° Rear/past vertical to +45° front. -- 7-1/2 HP Main motor. -- 1-1/4" Tilting spindle. -- 4,000 /6,000/ 8,000 / 10,000 RPM; holddown springs; reversing switch. -- Adjustable shaper fence. -- Foot motor brake.

GOMAD WW 23 23-Spindle Construction & Line Boring MachineSpecifications: -- Bores vertically from bottom & horizontally from rear. -- Spindle centers 32 mm (1.26").Equipped with: -- (3) Pneumatic hold-down clamps. -- Foot pedal control.

Approximately 27" width capacity 1/2" - 3.9" diameter capacity 10 HP spindle motor 1800-3200 spindle speed 3 HP hydraulic feed PLC sequence controller

3" - 41" length capacity 1" - 3" square or round diameter capacity 15 HP spindle motor Spindle speeds 2250, 3200, 3525, 4625 rpm hopper feed

GOODSPEED HF 412 AO Vertical Oscillating Chair Back Sander Specifications: Table size 30” x 30” x 34-1/4” H. Equipped with: 12" W x 25" L Horizontal abrasive belt, with 12” H x 4” Dia. Aluminum & Spiral rubber drums, 12” H x 3-1/2” Dia. Spiral rubber feed drum, with 2 HP Motor & Variable feed speed control. 60 W Feed & Oscillation motors.

12' Arm 250 Lbs Capacity 4 HP Pump Per owner: head only turns horizonally

GRASS - ECOPRESS P: Boring Machine (Hinge) -- SpecificationsPneumatic tabletop unit mounted on welded frame base; hinge boring w/GRASS inserter block.(1) 3-Spindle boring head for hinges; 1 HP motor. -- Drill unit & insertion head and (2) spring loaded holddown cylinders operate pneumatically. Boring depth automatically sets to the material thickness being processed. -- Complete with: 450 x 730 mm Extruded aluminum framework table. LH & RH material side stops. -- Actual Model: GRASS ECOPRESS P