Holz Her Edgebanders For Sale

HOLZ-HER 1329 SPRINT EDGEBANDER (W/PRE-MILL & CORNER ROUNDING) + Holz-Her Glu-Jet EVA/PUR Hybrid Technology Gluing Systems: -- Specifications:Features the HOLZ-HER Patented Dual "GLU-JET" EVA & PÜR Zero Joint Technology System.Edge thickness min./max. 0.4 - 12 mm (0.016 - 0.472"); coiled material 0.4 - 3 mm (0.016 - 0.157").Panel thickness 8 - 60 mm (0.236 - 2.362"); workpiece width min. of 60 mm (2.36"); workpiece length min. 160 mm (6.29"). Programmable Logic Control (PLC) for Pre milling, edge feed, glue application, end trimming, flush trimming, radius trimming, scraping, corner rounding, and buffing. -- Pre milling Station (1802):(2) 2.0 kW (2.68 HP) - 12,000 RPM motors; equipped with: "ProLock" quick change flange including height adjustment for optimum utilization of cutters. -- Edge Magazine (1901):Small 3° feed angle thanks to nozzle design with easy feeding of coils, strips & up to 3 mm and solid wood edging up to 15 mm (0.059").Exclusive "Tractor-Belt Feed System", edge guide equipped with automatic guillotine lock-out for safety. -- Pressure Section (1913 Mot):Servo-controlled pressure section with (1) large driven roller and (2) cantered idle rollers. Straight and tapered pressure rollers for perfect glued joints. -- Gluing System (GJ301 Auto):"GLU JE" Hybrid Technology "thin film technology processes EVA or PÜR Glue in cartridge or granulate form.Motorized, programmable glue nozzle (upper glue line) height positioning. Automatic reload of the glue cartridges or granulated. Workstations: -- End Trimming Unit (1918-P):Front & Rear - (2) 0.35 kW (0.5 HP) - 9,000 RPM motor each; unipoint swivel axis for no re-indexing when changing from flush to bevel end trim (0° - 10° bevel)."PCS" programmable pneumatic changeover from flush to bevel. -- Multi-Function Trimming Unit (1827MOT4): (2) 0.65 kW (0.87 HP) - 12,000 RPM each motor, Servo motors: (1) for horizontal copy wheel & (1) for tool spindle position; programmable top & bottom unit. Unipoint design with no second adjustment with pneumatic, programmable tilt action for changing the degree of bevel.Digital counters for vertical copy wheel position and pneumatic air cylinder for in/out pre-positioning of trimming motor. -- Corner Rounding Unit (1833 MOT4):(2) motors with 0.22 kW (0.30 HP) - 9,000 RPM, for linear edge trimming or vertical corner rounding with (4) Servo programmable positioning motors; Up to 3 mm edge thickness and workpiece thickness min./max.8 - 60 mm (0.31 - 2.36"); max. feed speed 18 MPM (59 FMP) up to 25 mm panel thickness; 26 - 38 mm panel thickness,16 MPM (52 FPM); 39 - 60 mm panel thickness, 2 MPM (6 FPM). -- Profile Scraping Unit (1929-MOT2): Top/Bottom Servo motor controlled, programmable knife position for PVC edges, reversible insert carbide knives.Equipped with air jet blowers and chip collector box. -- Glue Scraping Unit (1964):Flat, Top/Bottom, ball bearing guided and pneumatic controlled. -- Buffing Station (1940):Top & Bottom buffing mo

HOLZ-HER - CONTRIGA 1368, ...NC Controlled EdgebanderPC Controller has the ability to program all functions including: Panel thickness, edge feed, glue application, end trimming, radius/fine trimming, corner rounding, scraping and buffing. - Virtually eliminates set-up time by selecting & loading program that automatically activates these functions simultaneously.Coil edgebanding up to 3 mm PVC cap.; 2-3/8" max. panel thickness and 7" min. panel length; powered pressure beam opening adjustments. Equipped with: -- "1961" Premilling Station: PC Vontrolled with up to 45 mm (1-3/4") milling height; (2) motors @ 2 kW (2.6 HP) - 9,000 RPM each. -- Features: Granulate glue system with: Hopper System with "floating" applicator nozzle & "quick melt" feature. -- Automatic magazine for coil, strip & solid edgebanding model "1901" with: TRACTOR-BELT Feed system, Heavy-Duty guillotine for 3 mm PVC. -- "1914" Pressure Section for 12 mm thick edgebanding with: (3) Rollers, each w/individual pressure control, powered 1st roller with electronic speed control synchronized with chain feed speed; Servo motor adjustment for edgebanding thickness from PLC. Workstations: -- "1819-1" Double motor (1 HP - 6,000 RPM motor ea.) end trim units with: "Uni-Point" Swivel system; "quick change" from flush to 0° - 15° bevel from operator panel. -- "1962" Top & Bottom flush trim unit: 2.6 HP - 200 Cy HF motors; 12,000 RPM cutter speed; NC Servo control, non-tilt. -- "1966" Top & Bottom fine trim unit with: Motorized 5-axis positioning; 1.5 HP - 200 Cy HF motors;, 12,000 RPM cutterhead speed; bevels 0° - 45°, Servo control; all adjustments programmable through the PLC. -- "1933 & 1934" 4-Motor corner rounding unit for top & bottom of leading & trailing corner when edgebanding all (4) sides; 0.7 HP - 200 Cy ea.; both motors with Servo positioning from control panel; Servo adjustment of entire unit (base). -- "1927" Scraper Unit: Finishing up to 5 mm thick PVC banding for radius range from 2 - 5 mm; vertical & horizontal tracing wheels, Servo positioning enabled through "PC"; Servo controlled in/out of base. -- "1964" Top & Bottom Glue scraper. -- "1851" Oscillating buffing unit: Cleaning & polishing of panel; (2) 0.25 HP - 1,440 RPM motors; tilts 0° - 45° vertically and 0° - 20° swivel on horizontal plane.Other Specifications & Features: -- Variable feed speed up to 25 MPM (81 FPM); panel overhang beyond chain 35 mm (1.38"); features automatic track pad lubrication. -- Includes: PPC-231 Controller for line control, glue temperature & flow, feed speed setting, and motorized holddown pressure beam adjustment. -- Frequency inverter, outboard panel support, and sound enclosure w/interior lights over all milling units.NOTE: Only (6,227 hours) on the clock!

HOLZ-HER - ARCUS 1334, ...Edgebander (w/Premilling) & Features the HOLZ-HER Patented Dual "GLU-JET" EVA & PUR Zero Joint Technology SystemSpecifications: -- Edgebanding Capacity: Edge thickness min./max. 0.4 - 15 mm (0.016 - 0.59"); coiled material 0.4 - 3 mm (0.016 - 0.157"); panel thickness 6 - 60 mm (0.236 - 2.362").Workpiece width min. of 60 mm (2.36"); workpiece length min. 160 mm (6.29"); variable feed speed from 10 - 18 MPM (33 - 59 FPM).Machine Infeed Configuration: -- Premilling Station "1802": Servo controlled Premilling Infeed Fence; (2) 2.0 kW (2.68 HP) - 12,000 RPM motors; equipped with "ProLock" quick-change flange including height adjustment for optimum utilization of cutters. -- Edge Feeder Magazine "1901": Servo controlled "SYNCRO" drive control. - The new magazine with its synchronous adaptation to the feed rate guarantees short intervals between workpieces & simultaneously optimizes edging protrusions.Small 3° feed angle thanks to nozzle design with easy feeding of coils; strips up to 3 mm & solid wood edging up to 15 mm (5/8"). Exclusive "Tractor-Belt Feed System": Edge guide equipped with automatic guillotine lockout for safety. -- 3 mm Guillotine "1921": For up to 3 mm coiled & strip materials. -- Gluing Section "GJ301": Servo Controlled HOLZ-HER patented Glu-Jet Application System for both the HOLZ-HER cartridge and the HOLZ-HER Ultra-Granupress Systems.Both systems offer unrivaled properties when it comes to glue joint quality & processing time with ...95% less energy consumption & 70% shorter heat up time of 205° Celsius in just 3-1/2 minutes.Changing glue types takes just a minute and no special tools are required for both glue type and color. All that is changed is the cartridge or the glue hopper to use the Ultra-Granupress System. The time-consuming cleaning procedure of the glue pot, previously essential, is no longer necessary.The patented HOLZ-HER Cartridge System is a practical solution for processing EVA & PUR glue types. To use PUR glue, replace the EVA cartridge with a PUR cartridge that includes a separate melt-on unit. -- Pressure Section "1914": Servo Controlled, (1) large & (3) cantered driven pressure rollers for perfect glued joints.Workstations: -- Front & Rear End Trimming Unit "1925": Servo Controlled; 2 x 0.35 kW (0.5 HP) - 9,000 RPM each motor for edge thicknesses up to 20 mm. -- Multifunction Top & Bottom Trimming Unit "1828": Manual adjustment 2 x 0.65 kW (0.87 HP) - 12,000 each motor."PSC" Uni-Point design with no reindexing when changing from flush to bevel trim (0° - 10° bevel).Digital counters for vertical copy wheel position and pneumatic air cylinder for manual in/out pre-positioning of trimming motor. -- Top & Bottom Fine Trimming Unit "1826": Manual Adjustment, 2 x 0.65 kW (0.87 HP) - 12,000 each motor.Digital counters for vertical copy wheel position and pneumatic air cylinder for manual positioning of fine trimming motors. -- Top & Bottom Profile Scraping Unit "1927 HD": Servo

HOLZ-HER - 1327 Sprint Classic Special, ...Edgebander + Glu Jet EVA / PUR Hybrid Technology Gluing SystemsNote: This is a "SPECIAL MACHINE for THIN TAPE Only". -- Specifications: Features the HOLZ-HER patented dual "GLU-JET" EVA & PUR Zero Joint Technology System.Edgebanding capacity: Edge thickness min./max. 0.4 - 8 mm (0.02 - 0.31"); coiled material 0.4 - 3 mm (0.016 - 0.157").Workpiece thickness: 6 - 60 mm (0.23" - 2.36"); Workpiece width min. of 65 mm (2.56").Workpiece length: Min. 160 mm (6.29"); variable feed speed 10 - 18 MPM (33 - 59 FPM). Machine Infeed: -- "Open Space" for Premilling Station "1802": (2) 2.0 kW (2.68 HP) - 12,000 RPM motors.NOTE: This machine is not equipped with the Premilling Station, but it can be added. -- Edge Magazine "1903":For coil & strip processing; utilizes motion detector to ensure accurate, troublefree positioning of edge material.Exclusive "Tractor Belt Feed System": Edge guide equipped with automatic guillotine lockout for safety.3° Approach angle allows easy feeding of solid wood edges. -- Pressure Section "1913 Mot":1-Axis Servo controlled adjustment of the edge thickness.Pneumatic Plunge controlled pressure section with: (1) Large driven roller and (2) cantered idle rollers. -- Gluing System "GJ301Auto":Glue Jet Hybrid Technology: Processes "EVA" or "PUR" glue in cartridge or granulate form.Motorized programmable glue nozzle (upper glue line); height positioning. approx. 3-minute heat up time. Workstations: -- End Trimming Unit "1918P": Front & Rear; 2 x 0.45 kW (0.6 HP) - 9,000 RPM each motor.For Straight or Chamfer trimming with: "UNI-POINT Axis for "PCS" pneumatic changeover/swiveling up to 10° bevel. -- Combination Trimming Unit "1827": Top & Bottom; 2 x 0.65 kW (0.87 HP) - 12,000 RPM each motor; for T & B Flush/Bevel/Radius trimming. - "ProLock" Clamping System for rapid tool change.Manual edge radius adjustment up to 3 mm & chamfer adjustment up to 15° with a max. edge thickness of 6 mm. -- "Open Space" for 2nd T & B Trimming Unit.NOTE-1: This machine is not equipped with the 2nd T & B Trimming Unit, but it can be added. -- "Open Space"for Profile Scraping Unit "1929P". NOTE-2: This machine is not equipped with the Profile Scraping Unit "1929P", but it can be added. -- "Open Space" for Finish Scraping "1964". NOTE-3: This machine is not equipped with the Finish Scraping "1964", but it can be added. -- "Open Space"for Buffing Unit "1940". NOTE: This machine is not equipped with the Buffing Unit "1940", but it can be added. Operator Interface: -- HOLZ-HER "PPC 231" Power-PC + "Windows-like" Operating System. - 15" SVGA Flat "Touchscreen" control.USB Connection & Ethernet network connection ready; programs can be easily created and recalled at will. Graphic interface makes programming easy; icon of each unit may be brought up on the screen to show the Operator the status of the unit and the parameters that can be programmed.Edgebander can be operated manually when required, without necess

HOLZ-HER1435-SE EDGEBANDER1906 Cartridge glue system, 5 mm edge thickness cap. (up to 8 mm w/optional tooling), automatic magazine coil & strips, 3 mm PVC cap. pneumatic guillotine for coil cutoff. Workstations: -- Double motor end trim (2) 0.3 HP - 9,000 RPM motor ea.), chamfers 0° - 10° -- Universal top & bottom fine trim (for bevels from 0° - 15°) allows simultaneous bevel & profile trimming, (2) 0.8 HP - 18,000 RPM motor ea; all trim motors are 0.6 kW HF - 300 Cy. -- Top & bottom PVC scraper unit for 0.8 - 5 mm radius, with air jets for blowoff. -- Top & bottom "jump" buffing (0.3 HP - 1,620 RPM ea.). -- Single feed speed 35 FPM.Complete with: Built-in operator control panel, outboard panel support, frequency converter, used tooling, and sound enclosure.

HOLZ-HER - STREAMER 1057 XL, ...EDGEBANDER (W/PREMILL & CORNER ROUNDING): + Glu Jet EVA/PUR Hybrid Technology Gluing Systems: -- Specifications:Features the HOLZ-HER Patented Dual "GLU-JET" EVA & PUR Zero Joint Technology System.Working capacity: Min./Max. 0.4 - 6 mm edge cap; 8 - 60 mm panel thickness; min. panel length 160 mm; feed speed: 10 MPM (33 FPM) single speed.Equipped with: -- Pre-milling: (2) Vertical spindles, counter rotating with jump action, and manually adjustable infeed fence. -- HOLZ-HER "GLU JET": Cartridge System and flat glue nozzle applicator; Glue heat up time: (2 - 3) minutes max! -- Pressure Section with: (1) Large dia. drive roller and (2) pneumatic pressure controlled idle rollers; horizontal adjustment w/digital indicator. -- Automatic Edge Magazine: For coil and strip feed.Workstations: -- End Trimming Unit: Double-motor end trims, travels on 45° slides; tilt from 0° to 15°. -- Multifunction Trimming Unit: Top & Bottom trim station for flush/bevel/radius with digital readouts. -- Corner Rounding Unit: (1) Motor for radius/bevel vertical edge trimming; max. 60 mm panel thickness. -- Profile Scraping Unit: Top & Bottom radius scraping unit with mechanical digital readouts positioning. -- Flat Scraping Unit: Top & Bottom flat glue/finish scrapers.Controls: -- Compact Controls with: Swivel Control Panel at eye level, dual digital thermostats, manual push button on/off switch for glue heat up, edge magazine, and all workstations. Complete with: -- Safety/Sound Hood over all workstations, fixed panel support outrigger, manually adjustable hold-down beam. -- Original factory documentation; used tooling on the machine. -- Actual Model is: HOLZ-HER STREAMER 1057 XL.

HOLZ-HER - 1329 SPRINT, ...Edgebander (w/Premill & Corner Rounding) + HOLZ-HER Glu-Jet EVA/PUR Hybrid Technology Gluing Systems: -- Specifications:Features the HOLZ-HER Patented Dual "GLU-JET" EVA & PÜR Zero Joint Technology System.Edge thickness min./max. 0.4 - 12 mm (0.016 - 0.472"); coiled material 0.4 - 3 mm (0.016 - 0.157").Panel thickness 8 - 60 mm (0.236 - 2.362"); workpiece width min. of 60 mm (2.36"); workpiece length min. 160 mm (6.29"). Programmable Logic Control (PLC) for Pre-milling; edge feed, glue application, end trimming, flush trimming, radius trimming, scraping, corner rounding, and buffing. -- Pre-milling Station (1802):(2) 2.0 kW (2.68 HP) - 12,000 RPM motors; equipped with: "ProLock" quick change flange including height adjustment for optimum utilization of cutters. -- Edge Magazine (1901):Small 3° feed angle thanks to nozzle design with easy feeding of coils, strips & up to 3 mm and solid wood edging up to 15 mm (0.059").Exclusive "Tractor-Belt Feed System", edge guide equipped with automatic guillotine lockout for safety. -- Gluing System (GJ301 Auto):"GLU JET" Hybrid Technology "thin film technology processes EVA or PUR Glue in cartridge or granulate form.Motorized, programmable glue nozzle (upper glue line) height positioning. Automatic reload of the glue cartridges or granulated. -- Pressure Section (1913 Mot):Servo controlled pressure section with: (1) Large driven roller and (2) cantered idle rollers. - Straight and tapered pressure rollers for perfect glued joints. Workstations: -- End Trimming Unit (1918P): Front & Rear; (2) 0.35 kW (0.5 HP) - 9,000 RPM motor each; unipoint swivel axis for no reindexing when changing from flush to bevel end trim (0° - 10° bevel)."PCS" Programmable pneumatic changeover from flush to bevel. -- Multifunction Trimming Unit (1827Mot4): (2) 0.65 kW (0.87 HP) - 12,000 RPM Each motor: Servo motors: (1) Horizontal copy wheel & (1) tool spindle position; programmable top & bottom unit. Unipoint design with no second adjustment with pneumatic, programmable tilt action for changing the degree of bevel.Digital counters for vertical copy wheel position and pneumatic air cylinder for in/out prepositioning of trimming motor. -- Corner Rounding Unit (1833 Mot4):(2) Motors with 0.22 kW (0.30 HP) - 9,000 RPM, for linear edge trimming or vertical corner rounding with (4) Servo programmable positioning motors.Up to 3 mm edge thickness and workpiece thickness min./max. 8 - 60 mm (0.31 - 2.36"); max. feed speed 18 MPM (59 FMP) up to 25 mm panel thickness; 26 - 38 mm panel thickness,16 MPM (52 FPM); 39 - 60 mm panel thickness, 2 MPM (6 FPM). -- Profile Scraping Unit (1929P): Top/Bottom Servo motor controlled, programmable knife position for PVC edges, reversible insert carbide knives.Equipped with air jet blowers and chip collector box. -- Glue Scraping Unit (1964):Flat, Top/Bottom, ball bearing guided and pneumatic controlled. -- Buffing Station (1940):Top & Bottom buffing motors with: 15

HOLZ-HER - 1329 SPRINT, ...Edgebander (w/Premill & Corner Rounding + Holz-Her Glu-Jet EVA/PUR Hybrid Technology Gluing Systems: -- Specifications:Features the: HOLZ-HER patented dual "GLU-JET" EVA & PÜR Zero Joint Technology System.Edge thickness: Min./max. 0.4 - 12 mm (0.016 - 0.472"); coiled material: 0.4 - 3 mm (0.016 - 0.157").Panel thickness: 8 - 60 mm (0.236 - 2.362"); workpiece width min. of 60 mm (2.36"); workpiece length min. 160 mm (6.29"). Programmable Logic Control (PLC) for Premilling, edge feed, glue application, end trimming, flush trimming, radius trimming, scraping, corner rounding, and buffing. -- Premilling Station (1802):(2) 2.0 kW (2.68 HP) - 12,000 RPM motors; equipped with: "ProLock" quick change flange including height adjustment for optimum utilization of cutters. -- Edge Magazine (1901):Small 3° feed angle thanks to nozzle design with easy feeding of coils, strips & up to 3 mm and solid wood edging up to 15 mm (0.059").Exclusive "Tractor Belt Feed System: Edge guide equipped with automatic guillotine lockout for safety. -- Gluing System (GJ301 Auto):"GLU JET" Hybrid "thin film" technology processes EVA or PÜR Glue in cartridge or granulate form.Motorized, programmable glue nozzle (upper glue line) height positioning; automatic reload of the glue cartridges or granulated. -- Pressure Section (1913 Mot):Servo controlled pressure section with: (1) Large driven roller and (2) cantered idle rollers; straight and tapered pressure rollers for perfect glued joints. Workstations: -- End Trimming Unit (1918P): Front & Rear: (2) 0.35 kW (0.5 HP) - 9,000 RPM motor each; unipoint swivel axis for no reindexing when changing from flush to bevel end trim (0° - 10° bevel)."PCS" Programmable pneumatic changeover from flush to bevel. -- Multifunction Trimming Unit (1827Mot4): (2) 0.65 kW (0.87 HP) - 12,000 RPM each motor; Servo motors: (1) For horizontal copy wheel & (1) for tool spindle position; programmable top & bottom unit. Unipoint design with: No second adjustment with pneumatic, programmable tilt action for changing the degree of bevel.Digital counters for vertical copy wheel position and pneumatic air cylinder for in/out prepositioning of trimming motor. -- Corner Rounding Unit (1833 Mot4):(2) Motors with 0.22 kW (0.30 HP) - 9,000 RPM for linear edge trimming or vertical corner rounding with (4) Servo programmable positioning motors.Up to 3 mm edge thickness and workpiece thickness: Min./max. 8 - 60 mm (0.31 - 2.36"); max. feed speed 18 MPM (59 FMP); up to 25 mm panel thickness; 26 - 38 mm panel thickness,16 MPM (52 FPM); 39 - 60 mm panel thickness, 2 MPM (6 FPM). -- Profile Scraping Unit (1929P): Top/Bottom Servo motor controlled, programmable knife position for PVC edges, reversible insert carbide knives.Equipped with: Air jet blowers and chip collector box. -- Glue Scraping Unit (1964):Flat, Top/Bottom, ball bearing guided, and pneumatic controlled. -- Buffing Station (1940):Top & Bottom buffing motors wit

HOLZ-HER - 1488 TRIATHLON, ...Edgebander w/Premilling & Corner Rounding + LIGMATECH -ZR01 Return ConveyorWorking Capacity: Max. 1" (25 mm) solid wood banding. thin PVC, Veneer, HPL & 3 mm PVC cap.; 60 mm (2.37") max. panel thickness, and 140 mm (5-1/2") min. panel length.Front-End equipped with: -- Premilling Unit: (2) 2.2 kW (3.0 HP) - 12,000 RPM; (1) jump spindle with digital indicators for positioning. -- Gluing System: "ULTRA-GRANUPRESS" System with: Flat glue nozzle only 3° angle of approach ideal for solid wood edgebanding & "quick melt" feature. -- Automatic Edge Magazine for: Coil, strip & solid wood edgebanding with TRACTOR-BELT feed system; Heavy-Duty guillotine for 4 mm PVC. -- Pressure Section with: (3) Large dia. rollers, each w/individual pneumatic plunge and pressure control; programmable with Servo motor positioning; powered 1st roller with electronic speed control synchronized with chain feed speed.Edgebanding Workstations: -- End Trimming Unit: (2) 0.75 HP - 6,800 RPM ea. "HF" Motors with: "Uni-Point Swivel", quick change from flush 0° - 15° bevel programmable from operator panel; Servo controls. -- Flush Trimming Unit: (2) 2.6 HP - 12,000 RPM - 200 Cy HF motors; Servo controls. -- Fine/Bevel/Radius Trimming Unit: (2) 1-1/2 HP- 12,000 RPM - 200 Cy HF motors; bevels 0° - 45°, Servo controls + SIKO digital readouts. -- Corner Rounding Unit: (2) "HF" Top motors & (2) HF Bottom motors for trimming leading-and-trailing upper-and-lower edge/corners; trailing edge (4 x 3/4 HP - 12,000 RPM - 300 Cy HF motors; 2 mm or 3 mm radius cap. -- Profile Scraper Unit: "Super Duty" for positively smooth finishing thick PVC for radius range from 2 - 5 mm; vertical & horizontal tracing wheels, positioning enabled through (1) Servo motor function from Control Panel; SIKO readouts for easy setup. -- Buffing Unit: (2) Lateral buffing wheel positioning motors with Oscillating & Programmable Jump Action for cleaning & polishing of edges (two 0.25 HP - 3,600 RPM motors); tilts 0° - 5°, Servo controls.Equipped with and Includes: -- PPC 231 Controller with 15" LCD color screen: 90% of all set-ups can be adjusted from the Control Panel; programmable for a large variety of edges like solid lumber, veneer strips or coils, HPL, thin & thick PVC; line control so there are no mechanical limit switches along the chain track. -- Variable feed speed from 8 - 20 MPM (26 - 65 FPM); panel overhang beyond chain 35 mm (1.38"); features automatic track pad lubrication. -- Factory Documentation: Operating and Spare Parts Manuals. -- Actual Model is: HOLZ-HER 1488 TRIATHLON + LIGMATECH ZR01

HOLZ-HER - Streamer 1054, ...Edgebander w/Premilling + GLU JET Gluing Unit: -- Specifications:Min./max. 0.4 - 6 mm Edge Cap; 8 - 60 mm panel thickness; min. panel length 160 mm; feed-speed, 10 MPM (33 FPM) single speed.Equipped with: -- Premilling, (2) vertical spindles, counterrotating with jump action. and manually adjustable infeed fence. -- HOLZ-HER "GLU JET" Cartridge System and flat glue nozzle applicator; Glue heat up time (2 - 3) minutes max.! -- Pressure Section with: (1) Large dia. drive roller & (2) pneumatic pressure controlled idle rollers; horizontal adjustment w/digital indicator. -- Automatic Edge Magazine for coil and strip feed.Workstations: -- End Trimming Unit: Double motor end trims, travel on 45° slides; tilt from 0° to 15°. -- Multifunction Trimming Unit: Top & Bottom trim station for flush/bevel/radius with digital readouts. -- Profile Scraping Unit: Top & Bottom radius scraping unit with mechanical digital readouts positioning. -- Buffing Unit: 2-Motor Top & Bottom buffing. Operator & Machine Controls: -- "HOLZ-HER" Compact Control with: Swivel control panel at eye height, dual digital thermostats, manual push button on/off switches for glue heat up, edge magazine, and all workstations. Complete with: -- Safety/Sound Hood over workstations; fixed panel support outrigger, manually adjustable holddown beam. - Original factory documentation; used tooling on the machine. -- Actual Model is: HOLZ-HER - STREAMER 1054

HOLZ-HER - 1329 SPRINT, ...Edgebamder w/Premill & Corner Rounding + HOLZ-HER Glu-Jet EVA/PUR Hybrid Technology Gluing Systems: -- Specifications:Features the HOLZ-HER Patented Dual "GLU-JET" EVA & PÜR Zero Joint Technology System.Edge thickness min./max.: 0.4 - 12 mm (0.016 - 0.472"); Coiled material 0.4 - 3 mm (0.016 - 0.157").Panel thickness: 8 - 60 mm (0.236 - 2.362"); Workpiece width min. of: 60 mm (2.36"); workpiece length min.: 160 mm (6.29"). Programmable Logic Control (PLC) for premilling; edge feed, glue application, end trimming, flush trimming, radius trimming, scraping, corner rounding, and buffing. -- Premilling Station (1802):(2) 2.0 kW (2.68 HP) - 12,000 RPM Motors; equipped with: "ProLock" quick change flange including height adjustment for optimum utilization of cutters. -- Edge Magazine (1901):Small 3° feed angle thanks to nozzle design with easy feeding of coils, strips & up to 3 mm and solid wood edging up to 15 mm (0.059").Exclusive "Tractor-Belt Feed System": Edge guide equipped with automatic guillotine lockout for safety. -- Pressure Section (1913 Mot):Servo Controlled pressure section with: (1) Large driven roller and (2) cantered idle rollers; straight and tapered pressure rollers for perfect glued joints. -- Gluing System (GJ301 Auto):"GLU JE" Hybrid Technology: "Thin film" technology processes EVA or PÜR Glue in cartridge or granulate form.Motorized, programmable glue nozzle (upper glue line) height positioning; automatic reload of the glue cartridges or granulated. -- Workstations:End Trimming Unit (1918-P): Front & Rear: (2) 0.35 kW (1/2 HP) - 9,000 RPM Motor each; unipoint swivel axis for no reindexing when changing from flush to bevel; end trim (0° - 10° bevel)."PCS" Programmable pneumatic changeover from flush to bevel. -- Multifunction Trimming Unit (1827MOT4): (2) 0.65 kW (0.87 HP) - 12,000 RPM Each motor; Servo motors: (1) Horizontal copy wheel & (1) tool spindle position; programmable top & bottom unit. Unipoint design with no second adjustment with: Pneumatic, programmable tilt action for changing the degree of bevel.Digital counters for vertical copy wheel position and pneumatic air cylinder for in/out prepositioning of trimming motor. -- Corner Rounding Unit (1833 MOT4):(2) Motors each with: 0.22 kW (0.30 HP) - 9,000 RPM; for linear edge trimming or vertical corner rounding with (4) Servo programmable positioning motors.Up to 3 mm edge thickness and workpiece thickness; min./max. 8 - 60 mm (0.31 - 2.36"), max. feed speed 18 MPM (59 FMP); up to 25 mm panel thickness; 26 - 38 mm panel thickness, 16 MPM (52 FPM); 39 - 60 mm panel thickness, 2 MPM (6 FPM). -- Profile Scraping Unit (1929-MOT2): Top/Bottom Servo motor controlled, programmable knife position for PVC edges, reversible insert carbide knives.Equipped with air jet blowers and chip collector box. -- Glue Scraping Unit (1964):Flat, Top/Bottom: Ball bearing guided and pneumatic controlled. -- Buffing Station (1940) Top & Bottom buffi