• Used
  • New
 
  •  
 
  •  
 
  •  
 

 
93 Results Found for Hogs and Wood Grinders Viewing 1 - 20 of 93 results
PREMIUM LISTINGS
Model Number: ARASMITH 50X101 TOP FEED SALVAGER HOG PORTABLE UNIT SERIAL: 50-101-HH-1040 CAT 3412 950 HP 3 AXEL TRAILER All is in working condition except the knuckle boom needs hydraulic hoses to the boom, the hog needs 1 set of Hog screens, Hoses are new under the loader cab, 120,000 Contact : Greg Arasmith Arasmith Industries International LLC PH (706) 235-8576 Ex 102 FX (706) 291-1894
Equipment Location:FL
Arasmith Industries International, LLC
706-235-8576
Montgomery 50" Horizontal Hog, Good Condition, Was Working Daily, Already Taken Out, Lots of New Teeth $12,900 obo 859-556-3648/606-209-1405
Equipment Location:Flemingsburg, KY
859-556-3648
S O L D
Blo Hog 34RCGO BU, S/N 1848, w/300hp Electric motor, Will Sell Seperate
Equipment Location:Loveland, OH
Price Wood Products
513-722-1200
RAWLINGS MANUFACTURING WASTE WOOD GRINDER. IN STOCK, MANY SIZES AVAILABLE, WEAR PARTS AVAILABLE FOR RETRO FITTING YOUR HOG. CALL 406-728-6182 FOR DETAILS.
Equipment Location:Missoula, MT
Rawlings Manufacturing, Inc.
406-728-6182
STANDARD LISTINGS
ARASMITH Bark Grinder - 45 x 63-1/2 inch top feed opening drum style bark hog. Features 50 inch diameter drum with fixed teeth. Serial HH-1368-692. Top feed, bottom discharge. 20 tons per hour or more capacity. 200-300 HP recommended. see our entire inventory at www.benjones.com
Equipment Location:Columbus, GA
Ben Jones Machinery
706-324-2604
Barkhog 2 50 HP 3 phase motors rebuilt when purchased never installed
Equipment Location:WV
Pallet Machinery Group
540-644-9220
Model 1590 250 HP direct drive electric motor Schutte Buffalo Hammermill ready for pick up
Equipment Location:GA
Carolina Machinery Sales, Inc
704-288-1904
Bliss Eliminator Hammermill: E-4420 TF: Motor Base fro 1800 RPM 100 or 150 HP Motor, 2400 sq inch screen area, top center feed inlet, deflector: Directional Gate, (2) sets of screens 8/64", Quick change spring loaded shock absorbent screen carraiage, replaceable wear plates mild steel, 3-7/16" extra heavy duty spherical roller bearings, 1-set of hard-faced hole hammers 1/4" thick, 1-set of hardened hammer pins 1-1/4" diameter, 150 HP Motor, Vibration sense switch, Micro safety switch, Rubber vibration pads, 5-Row rotarty feeder with 10" diameter cups, ceramic stainless steel plate magnet HD 2.5" thick x 20" wide Exhaust Fan with 15 HP motor Bin Vent with 602 sq ft of cloth Plenum Chamber Rotary Airlock: Model MD-260, machined rotor Screw Conveyor: 12" Diameter, approx 12' long This system was purchased new and never installed.
Equipment Location:MB
Carolina Machinery Sales, Inc
704-288-1904
CAM-WOOD WX-1502H Horizontal GrinderImpact resistant tooling with excellent wear capability. Specifications: Horizontal feed, 20 HP - 1,750 RPM drive motor; 15-3/8" x 2-3/8" infeed chute; 8" dia. air discharge. -- Equipped with: (18) rotary cutter sets with cutter head angle to allow aggressive cutting rates and high speed shredding of waste; (4) stationary cutter sets; 10" dia. rotor; 575 RPM. -- The shaft rest for the cutter head is constructed by round hollow with special angle for cooling during production. -- Complete with: Removable screen for easy clean up and chip size changes from standard 1/2". -- Includes: Operators' & Parts Manual and covered by (1) Year Warranty.
Equipment Location:WEST COAST
Jim Reedy
800-374-5009 ext:455
CAM-WOOD WX-4150 Horizontal GrinderImpact resistant tooling with excellent wear capability. Specifications & features: Vertical-feed Chute, 50 HP - 1,750 RPM drive motor; 41" x 12" infeed chute; (12) rotary cutter sets with cutter head angle to allow aggressive cutting rates and high speed shredding of waste. -- The shaft rest for the cutter head is constructed by round hollow with special angle for cooling during production. -- Complete with: Removable screen for easy clean up and chip size changes from standard 1/2". -- OutPut: 1,300 - 4,000 Lbs/Hr, depending on material and moisture content. -- Includes: Operators' & Parts Manual and covered by (1) Year Warranty.
Equipment Location:WEST COAST
Jim Reedy
800-374-5009 ext:455
CAM-WOOD WX-5012 PL Horizontal GrinderImpact resistant tooling with excellent wear capability. Specifications & features: Vertical-feed Chute, 100 HP - 1,750 RPM drive motor;41" x 12" infeed chute; (15) rotary cutter sets with cutter head angle to allow aggressive cutting rates and high speed shredding of waste; 15" dia. rotor; 530 - 620 RPM. -- The shaft rest for the cutter head is constructed by round hollow with special angle for cooling during production. -- Complete with: Removable screen for easy clean up and chip size changes from standard 1/2". -- OutPut: 1,100 - 1,900 Lbs/Hr, depending on material and moisture content. -- Includes: Operators' & Parts Manual and covered by (1) Year Warranty.
Equipment Location:WEST COAST
Jim Reedy
800-374-5009 ext:455
CAM-WOOD WX-1504HC Horizontal Grinder w/ConveyorImpact resistant tooling with excellent wear capability. Specifications: Horizontal feed with (2) 1 HP infeed roller motors; 20 HP - 1,750 RPM drive motor; 15-3/8" x 4" infeed chute; 8" dia. air discharge. -- Equipped with: (18) rotary cutter sets with cutter head angle to allow aggressive cutting rates and high speed shredding of waste; (4) stationary cutter sets; 10" dia. rotor; 680 RPM. -- The shaft rest for the cutter head is constructed by round hollow with special angle for cooling during production. -- Complete with: Removable screen for easy clean up and chip size changes from standard 1/2". -- Includes: Operators' & Parts Manual and covered by (1) Year Warranty.
Equipment Location:WEST COAST
Jim Reedy
800-374-5009 ext:455
200 HP Main Motor Cutters: 117 F-Cutters Screen: (4 ) 22" Diameter Wide with 1-1/2" Holes This grinder was removed from service in good working condition. It is ready to load
Equipment Location:IL
Carolina Machinery Sales, Inc
704-288-1904
CHALLENGER CH 300 3045 Horizontal Feed Waste GrinderHorizontal Grinder for the grinding of large slabs and pallets. -- 60 HP drive motor drives an 18" dia. rotor, 36" in length with diamond shaped cutters. -- inlet of 36"wide x 7-1/2" high fed by a 10' x 36" conveyor. -- Automatic control panel pre-connected to the grinder with PLC controller and STAR DELTA starters. Includes Vibrating conveyor 18" X 35 feet long .
Equipment Location:NORTHEAST
Jim Reedy
800-374-5009 ext:455
CHALLENGER CH300-4055-SR Horizontal Grinder; for grinding large slabs and rippings. -- Equipped with: 75 HP drive motor drives an 18" dia. rotor, 36" in length with diamond shaped cutters, inlet of 39" wide x 7-1/2" high. -- 4-Way indexable cutter knives, 1-piece counter bed knife. -- Complete with: Top & bottom infeed rollers powered by a 3 HP motor, Heavy Duty Industrial Grade construction with stress-relieved shell & frame, Heavy Duty outboard roller bearings, separate electrical control panel. -- Interchangeable screen to produce chips from 3/8" to 2-1/2" in size, screen size to be determined prior to shipping, 10" dia. collection outlet; output cap. up to 300 -2,000 Lbs/Hr, depending on screen size. -- Includes: Vibratory infeed conveyor; baffled screen (size TBD); dismantling & loading
Equipment Location:MID ATLANTIC
Jim Reedy
800-374-5009 ext:455
Champion Hammer Mill 18"x30" opening, 1/8" Screen Holes, Approx 10 to 12 ton an Hour, Came out of Pellet Mill, 44" Diameter rotor tip to tip Serial # 63065. Parts available through Champion.
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Champion 30" x 28" Hammer Mill w/250HP Electric Motor & Industrial Magnet
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Cresswood LR-30 DST Horizontal Grinder, 75HP electric Motor, S/N 1100200
Equipment Location:Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Cresswood 36-50 (No infeed included) 50 HP Motor Spare parts include: New anvil, misc cutters & holders This machine has been in storage for 3-years.
Equipment Location:NC
Carolina Machinery Sales, Inc
704-288-1904
Cresswood Model HF-40-40-ST 40 HP Main Motor 60" x 36" Hopper Opening 16" x 40" Diameter Rotor: 100-150 RPM, Approx 60-knives Hydraulic Ram PLC Controls Sani-Tech Systems Auger Compactor: 40 HP, Hydraulic Side Loading This grinder is no longer needed at this facility. Available in August, 2019.
Equipment Location:NC
Carolina Machinery Sales, Inc
704-288-1904