Woodworking Equipment For Sale

Dust collector (unknown make) 3/4 HP. 230/480v good shape. Call 800-459-2148 for more info.

1945 American Sawmill Machinery Co Monarch 24" Planer. Power - direct drive 5 HP. Restored and refurbished. Very little original use at Old Pioneer Sawmill. Call 800-459-2148 for more info.

Arrow Pneumatics model; B-225-2, 230 volts, 225 scfm's, working condition

Smithway Machine Company 1940s era Gang ripsaw. XL Ripper model 208. 20 HP 3 phase with separate 1/2 feed motor. Max board with with 2 blades is 10". Currently has 2 16" carbide tipped blades installed. 1.75 arbor. Includes extra blades. Call 800-459-2148 for more info.

30" Planer. Older model, Good for rough jobs. Call 800-459-2148 for more info.

Planer helical knives, for Northfield 240 double surfacer planer. Complete set. Make an offer! Call 800-459-2148 for more info.

---In Auction---NO RESERVE--- 2-Spindle Vertical Boring Machine Equipped with: - 1 HP - 3,400 RPM Motor. Complete with: - "30C-W20” 2-Spindle Boring Head, with Maximum bit cap. 15 mm (0.59”), Bit threads 7/16 - 14 TPI Right-hand, Spindle speed 4,000 RPM Details, Photos, Videos, Bidding: https://exfactoryauctions.com/Detail/BV-230384/event/A051324$1

---In Auction---NO RESERVE---Fair Condition--- 7' Stroke Sander Specifications: - Table size 19” x 73-1/4” x 24” H, with 19-3/4” x 73-1/4” x 3/4” Thick Wood top. - Manual table stroke 26-3/4". Equipped with: - 7” W x 84” Face Sanding belt, with 3 HP - 1,140 RPM Motor. Details, Photos, Bidding: https://exfactoryauctions.com/Detail/SS-230670/event/A051324$1

---In Auction---Good Condition--- 24" 2-Head Wide Belt Sander Specifications: - Thickness cap. 0" - 5". Equipped with: - 1st Head: 5” Dia. Grooved rubber-covered contact roll, with 15 HP - 1,740 RPM Motor. - 2nd Head: 3” Dia. Grooved rubber-covered & 3” Dia. Smooth steel contact rolls, with Finishing platen, & 15 HP - 1,740 RPM Motor. - 1-1/2” Dia. Spring-loaded rubber-covered infeed & outfeed pinch rolls, (1) In front of 1st head, (1) In between heads, & (2) Pair after 2nd head. - 23-1/4” W x 3-1/2’ L Feed belt, with 2 HP - 1,720 RPM Motor. Control, with Motor load meters. Details, Photos, Bidding: https://exfactoryauctions.com/Detail/SX-230385/event/A051324$1

Planer I/F

(18) Shaft Profile Heads

Center Split Saw with Infeed, Outfeed, Air Knock Off. 75HP Motor.

Straight Line Rip Saw

2 Spindle Boring machine 1 Vertical & 1 Horizontal

4 Spindle Multi Drilling Machine

US CONCEPTS CHB 12 HauncherThe CHB-12 Hauncher-Notcher is designed to notch along the edge of the board or across the end.Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. Equipped with: a 40 mm horizontal spindle that moves up hydraulically past the table with the clamped material. -- A backup board in the table and climb cut ensure the clean-cut, even on cross grain. -- Material air clamps and spindle motion are actuated by a foot switch. Specifications: -- Spindle Dia. 40 mm, Spindle Length 12". (Also available in 16" & 20" capacities) supported on both ends; -- Max. Cutter Dia. 10" (254 mm); max. Cutting Depth 2-1/2" (64 mm); max. Material Stacking Height 8" (200 mm). -- Spindle Speed 4,300 or 6,200 RPM; Feed Speed (Air/Oil) 0 - 25 FPM; 15 HP motor; Dust Outlet 2 x 6" (150 mm).Complete with: -- (2) Air Clamps, Back Fence, Side Pivot stop, and Stop Bar. -- Table Size 36" x 16"; Machine Weight 1,650 Lbs (750 kG). -- OPTIONS: Electric; 20 or 25 HP motor; Additional Air Clamps; Additional Side Stop; Center Fence mounted to the Table; Horizontal Clamps; Extended Stop Bar. -- Other Options: Fixture for 45° Cut (Mitered cabinet Doors or Stretcher Bars).

Universal arch moulder, equipped with two (2) axis spindle adjustment and spindle tilt in order to easily and accurately match the cutter to the moulding profile. -- The spindle adjustment and floating feed make cutting circular, elliptical, and straight casing and crowns a breeze. -- The Floating feed system is user friendly and easy to set up. -- The Spindle can be adjusted from Horizontal to 52° to insure the proper cut on the parts you need!

US CONCEPTS FAS-HD "Arch Type" Shaper;Specifications: -- Universal arch moulder, equipped with two (2) axis spindle adjustment and spindle tilt in order to easily and accurately match the cutter to the moulding profile. -- The spindle adjustment and floating feed make cutting circular, elliptical, and straight casing and crowns a breeze.

US - CONCEPTS - FAS 100, ... Arch Moulding ShaperSpecifications: -- Table size: 28" x 46" x 34" H . -- Spindle dia.: 1-1/4". -- Spindle speed: 6,500 RPM. -- Max. cutting width: 4"; max. cutter dia.: 6-1/2".Equipped with & Features: -- 7.5 HP Spindle motor, 0.5 HP variable speed DC feed motor. -- Mobile base with (4) Swivel casters.Dimensions: 50" x 32" x 60" H.

75 HP 550 Volt 3 phase