Woodworking Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 6 of 89
1768 Results Found
Sort By 
Recently Added Items
2005 SCM CONCEPT NT/L DOUBLE-END TENONING LINE
Call For Price
2005 SCM CONCEPT NT/L DOUBLE-END TENONING LINE
Taylor 40 Section Clamp Carrier
Call For Price
Taylor 40 Section Clamp Carrier
Delta 43-791
$4,150
Delta 43-791
2026 Bala DPM ED 1955
$34,250
2026 Bala DPM ED 1955
$ 29,500

BIESSE - STREAM B1 9.5 Edgebander (w/Premill & Corner Rounding) -- SpecificationsEdge thickness cap.: 0.01' - 0.8" (0.3 - 20 mm); Min. panel width: 2-1/2" (65 mm); panel thickness: 0.4" - 2.4" (10 - 60 mm); min. panel length: 6" (150 mm). Automatic 2-coil vertical feed magazine for coil material: Up to 3 mm thickness with automatic changeover. Patented Glue System with: Premelt; large separated granular hopper for easy filling & high gluing capacity.Reversible roller applicator with: (1) Large driven pressure roller & (6) pneumatic secondary pressure rollers. -- Operator & Machine Control "NC 410" Controller with: Graphic interface on MS-Windows 2000 Professional; 32-bit Operating System; high resolution LCD color screen;Unlimited" number of working programs; each with functions for remote control of processing units: Fault diagnostic; bar code reader adaptable; etc. Workstations -- Premilling UnitWith jump control & side copying unit for managing warped panels; 2-position infeed fence; digitals readouts. -- End TrimmingDouble motor front & rear linear end trimming unit: "IT 46" (0.4 HP / 0.3 kW - 12,000 RPM motors ea.); pneumatic chamfer setting: 0° - 15° Adjustable. -- Pre-/Rough TrimmingTop & Bottom "RS 10": 1-3/4 HP / 1.3 kW - 12,000 RPM Motor ea.; pneumatic exclusion & positioning from Control Panel. -- Radius/Bevel TrimmingTop & Bottom: 0.87 HP /0 .65 kW - 12,000 RPM Motor ea.; tiltable 0° - 30°; pneumatic exclusion from Operator Panel. -- Corner Rounding 4-Motor for leading & trailing edges. -- Profile Scraping Unit: Top & Bottom with collection box. -- Flat Glue ScrapersTop/Bottom to remove potential glue squeeze out. -- Buffing UnitTop/Bottom oscillating/tilting "SZ 30" w/pneumatic exclusion control from Control Panel; 0.67 HP / 0.5 kW - 1,400 RPM motors. -- Hot Air UnitTop/Bottom hot air blowers to reactivate/smooth heavy PVC radiused edges. -- Complete with:Motorized top pressure beam with: Powered V-belt holddown; 80 mm wide Heavy-Duty feed chain w/rubber pads. 4 HP (3 kW) Feed drive for feed variable speeds of: 33 - 79 FPM (10 - 24 MPM). Electronic positioning by NC controller with: Pneumatic Preset Stop System for most adjustments via the Control Panel on: Top & bottom trim; fine trim; scraper station; electronic frequency inverter.Includes: Electronic DC brakes on all trim motors; sound cabins for all trim workstations; outboard panel support.

Bob Bullin
800-374-5009 ext:346
Call

$ 16,650

BIESSE - AKRON 855, ...Edgebander with Premill & Corner Rounding (Loaded!)Specifications: -- Edge & Workpiece Capacity: 0.4 - 15 mm (0.016" - 0.59") Edge thickness; 14 - 65 mm (0.55" - 2.56") edge height; 10 - 60 mm (0.39" - 2.36") panel thickness; 140 mm (5-1/2") min. panel length; 85 mm (3.3") min. panel width. Infeed Section: -- Premilling Unit - "FI-701"Rectifies face to be edged before applying glue; horizontal & vertical movement of (2) motors on linear guides; independent automatic temporized intervention of (2) 1.8 kW (2-1/2 HP) - 12,000 RPM motors; independent copying pads on each unit, Autoset device to ensure optimum positioning of cutters according to thickness of panel being machined. -- Edge Feeding, Gluing & Pressing Unit - "VC-710"With automatic edge magazine for strip & coil stock; 3 mm (0.04") PVC guillotine; "TEKNO-GLUE" System includes: Pre-Melt "QM-701"; for quick heating & tank changing with floating & bidirectional glue roller applicator & NC axis idle presser roller movement device. -- Pressure Section: (1) Large driven & (5) Idle rollers, Independent pneumatic pressure control, Programmable servo motor for quick edge thickness changeover, Feed speeds 10, 14 & 20 MPM (33, 46 & 65 FPM).WORKSTATIONS: -- End (Edge) Trimming Unit - "IN-701-V"(2) 0.35 kW (0.5 HP) - 12,000 RPM Motors; automatic 4-position programmable chamfer from Control Panel (0°, 3.6°, 11°, 15°); sliding in slicing motion on 45° precision guide bar with oversized bearing blocks. -- Superimposed Flush (Double Edge) Trimming Unit - "RS-701"Top & bottom; (2) 0.8 kW (1 HP) - 12,000 RPM motors with superimposed motor position; 1° tilt capability; includes: Pneumatic exclusion device & Pneumatic top/bottom motor positioner. -- Tilting Top & Bottom Trimming Unit - "RI-701"(2) 0.65 kW (0.87 HP) - 12,000 RPM Motors; for radius top & bottom fine trimming; unit can be tilted 0° - 45°; includes: NC axis multiple machining device. -- Corner Rounding Unit - "CR-200V"For corner rounding; top & bottom trimming on panel edge with synthetic material & wood edgebanding up to 5 mm (0.20") max. edge thickness. -- Edge Scraping Unit - "RB-701"For finishing rounded off edges in PVC or ABS up to 5 mm (0.20") thickness includes: Pneumatic Unit Lifter. -- Flat (Glue) Scraper - "RCC-700"Top & Bottom, Removes potential excess glue before buffing unit. -- Buffing Unit, "SPL-700":Top & Bottom. -- Hot Air Blower Unit - "PH-700" - (2) STEINEL "2346" 2,000 W; reactivates color of thick plastic.Complete with: -- PC-Based Control Panel with: 15" Color LCD monitor, HF (High Frequency motors on all cutting & trimming workstations. Top pressure beam programmable via positioning motor; top pressure provided by belt holddown. 36" Dia. Coil table: Padded sound enclosure. -- Manuals (as pictured).Dimensions: 280" x 42" x 72" H. - Weight: 3,500 kG (7,750 Lbs.).

Ed Webb
800-374-5009 ext:377
Call

$ 13,700

BIESSE - LATO 28: Edgebander, PLC Controlled. -- Specifications:Top pressure beam with: Large, staggered rubber rollers on precision bearings. -- Panel thickness: 10 - 45 mm; panel width: 50 mm Min.; panel length: Min. 150 mm; edgeband thickness (coils): 0.4 to 3 mm; edgeband thickness (strips): 8 mm Max.; track speed: 36 FPM. -- Machine Control: The PLC Electronic Control with Display and Keyboard. -- Work Units:Dual End Trimmers; Top & Bottom Tilt Trim Unit; Profile Scraper; Buffing. -- Complete with: -- Industrial granulate glue system; Heavy-Duty guillotine; pneumatic pressure rollers. -- Dual end trim motors on STAR guide system with: Pneumatic inclination. -- Heavy-Duty standalone top & bottom trim units with: Quick position digitals. -- Profile PVC scraper with: Pneumatic positioning; dual motor buffing.

Bob Bullin
800-374-5009 ext:346
Call

$ 11,660

BIESSE AKRON 245 Edgebander with Corner Rounding: Left-hand material infeed for strips & coiled edge material like PVC, ABS, veneer, and solid wood.Specifications: -- 0.4 - 8 mm (5/16") Cap. Edgebanding thickness, min. panel width 85 mm & min. length 140 mm, panel thickness 10 - 50 mm.Equipped with: -- Adjustable top pressure beam positioning. -- Automatic strip & coil feed magazine with robust shear type 3 mm PVC guillotine. -- Hot-Melt glue system (12 min. heat up time) with Teflon coated gluepot, digital thermostats with automatic kick-down when machine is in idle mode; 1" dia. glue applicator roller. -- Pressure section with (1) large dia. "non-stick" coated drive roller & (2) chrome plated idle rollers with pneumatic positioning.Workstations: -- Front & Rear End Trims (0.33 HP - 12,000 RPM motors), motors travel on (2) straight slides and pneumatic tilt 0° - 25° on horizontal plane. -- Top & Bottom Flush Trims with "Quick Change" motors (1.0 HP - 12,000 RPM motors), digital readouts for easy setup. -- 2-Motor (0.3 HP - 12,000 RPM motors) Corner rounding unit for trimming leading & trailing upper & lower edge/corners with "Fast Position" and can be used as a second Top & Bottom fine trimmer as well. -- Top & bottom Scrapers for 3 mm thick PVC banding, digitals for horizontal adjustments. -- Top & bottom Buffing (0.5 HP - 2,800 RPM motors), units tilt 0° - 30°. -- Top & bottom (2,000 Watt) Hot Air Blowers with temperature adjustment. -- Feed Speed 39 FPM, 3 HP feed drive.Complete with: -- Microprocessor for workstations & feed speed. -- Insulated sound enclosure over all trim stations with triple split dust hood, industrial lights and viewing windows. -- Extendable side panel support rail, 12 KVA - 240 Hz digital frequency inverters. - Includes: Used tooling on all workstations.

Bob Bullin
800-374-5009 ext:346
Call

$ 13,460

BIESSE - AKRON 246: EDGEBANDER WITH PRE-MILL AND CORNER ROUNDING0.4 - 8 mm (5/16") Cap. Edgebanding thickness; min. panel width: 85 mm; min. length: 140 mm; panel thickness: 10 - 50 mm; automatic strip & coil feed magazine with: Robust shear type 3 mm PVC guillotine.Equipped with: -- Adjustable top pressure beam positioning. -- Hot Melt glue system (12 min. heat up time) with: Teflon coated glue pot; digital thermostats with automatic kickdown when machine is in idle mode. -- 1" Dia. glue applicator roller; pressure section with: (1) Large dia. "non-stick" coated drive roller & (2) chrome plated idle rollers with pneumatic positioning.Workstations -- Pre-Milling Station with: (2) 3 kW (4 HP) - 150 Hz, 9,000 RPM Motors. -- Front & Rear end trims (0.33 HP - 12,000 RPM motors); motors travel on (2) straight slides; pneumatic tilt 0° - 25° on horiz. plane. -- Top & Bottom flush trims with "Quick Change" motors (1.0 HP - 12,000 RPM motors), digital readouts for easy setup. -- Corner rounding unit for trimming leading & trailing upper & lower edge/corners with "Fast Position"; can be used as a 2nd Top & Bottom fine trimmer, as well. -- Top & Bottom scrapers for 3 mm thick PVC banding; digitals for horiz. adjustments. -- Top & Bottom (2,000 Watt) hot air blowers with temperature adjustment. -- Top & Bottom buffing (0.5 HP - 2,800 RPM motors); units tilt 0° - 30°. -- Feed Speed: 39 FPM, 3 HP feed drive.Complete with: -- Microprocessor for workstations & feed speed; insulated sound enclosure over all trim stations with: Triple split dust hood; industrial lights; viewing windows. -- Extendible side panel support rail; 12 KVA - 240 Hz digital frequency inverters. -- Includes: Used tooling on all workstations.NOTE: Seller states that all workstations are functioning properly as can be seen in the video, but the End Trim needs adjustment. The Return Conveyor is not included.

Ed Webb
800-374-5009 ext:377
Call

$ 24,750

BIESSE - ROXYL 5.5: Edgebander (w/Premill & Corner Rounding)SpecificationsEdgebanding Cap. - Edge thickness for strips: Min./max.: 0.4 - 22 mm (0.02" - 0.87"); coiled material from: 0.4 - 3 mm (0.02 - 0.12"); panel thickness from: 10 - 60 mm (0.39 - 2.36"); workpiece width; Min.: 85 mm (3.34"); workpiece length min.: 140 mm (5.51"); feed speeds: 10 - 14 - 18 - 20 MPM (33 - 46 - 59 - 65 FPM). Machine Interface -- "Roxyl-Matic" Automated machine setup; MS/Windows XP Operating System; floppy drive; 4 GB HD; USB port, keyboard, and mouse interface. -- Flat-Screen (17") with Color graphics interface: Programs can be easily created & recalled at will; graphic interface makes programming easy: Icon of each unit may be brought up on the screen to show the Operator the status of the unit & parameters, which can be programmed; Edgebander may be operated manually when required, without necessity to write a program.Machine Infeed Configuration -- Premilling Station "FL-502". (2) LH & RH Rotating NC controlled spindles with: Automatic center positioning. -- Anti-Adhesive: "ADZ-700" Automatic Spray Unit with: Glue release agent preventing glue to adhere to workpiece surfaces. -- Infrared Heating Lamp. Preheating workpiece edge to ensure best possible surface adhesion quality of edgebanding material. -- Edge Magazine. Automatic for processing coiled & strip edgebanding material. -- Pressure Section Servo controlled programmable pressure section with: (1) Large driven roller and (4) idle rollers.Gluing System -- EVA (Hot Melt) "QM-705" Quick premelting granulate with: Glue roller applicator to cover conventional edgebanding material. Workstations -- End Trimming Unit "IN-801": Front & Rear trimming motors; unipoint swivel: 0° - 15° Bevel; programmable pneumatic change-over from flush to bevel. -- Rough/Flush Trimming Unit "RS-701": Top/Bottom pre- or flush trimming motors. -- Flush/Bevel/Radius Combination Trimming Unit "RF-400": Servo controlled: (2) Servo motors (one for horizontal tool position; one for tool up/down position); uses combination bevel/radius/flush insert knives; prepositioning of motors by pneumatic air cylinders. -- Corner Rounding Unit "CR-202": (2) Motors for front/back corner and upper & lower edge profiling. -- Profile Scraping Unit "RBK-503": Top/Bottom 2-axis NC programmable knife positioning (i.e. 2 - 3 mm radius) for PVC edges. -- Glue Scraping Unit "RCC-701": Flat top/bottom; digital positioning indicators; pneumatic controlled for in/out position. -- Buffing Station "SP-501" Top & Bottom buffing motors with: 150 mm (6") Cloth buffing wheel diameter; adjusts in multiple directions. -- Edge Reactivation Unit "PH-700": Top/Bottom hot air blowers to restore original color to profile scraped PVC edge material.Complete with: -- Top Pressure Beam with: Driven flat belt & programmable height positioning.Includes: Multi-Tap Transformer. - Sound Hoods with interior lights. - Outboard panel support.

Ed Webb
800-374-5009 ext:377
Call

$ 16,500

BIESSE - ELIX B: CNC Bore, Glue, and Dowel InserterBIESSE Drill & Dowel Inserter features: Single spindle for drilling; dowel insertion unit; glue injecting unit installed on a carriage moving in the X-axis.Position for drilling dowel insertion provided through simple programs through the NC control or third-party software. Operator Control interface is: Intuitive, user-friendly, and very easy to use. -- Specifications Max. parts length: 1,300 mm (51";); Min. parts length: 120 mm (4.7";); Parts thickness: 10 - 40 mm (0.4"; to 1-1/2";). -- Positioning Speed "X" & "Y" Axis positioning speed: 40 MPM (131 FPM); "Z" Axis has manual adjustment with: Max. stroke of 40 mm (1.57").The working unit's travel on Precision machine ground ball screws; powered by brushless AC Servo motors. -- Worktable(4) Working zones with: Center fence position in up mode; (2) large work zones in down position; (4) holddown cylinders. -- Boring UnitDrilling Unit. High-speed unit with: 6,000 RPM Spindle; max. drilling depth: 30 mm (1-1/4"); max. drill bit dia.: 12 mm (0.47"); manual adjustment of depth with: Digital indicator. -- Dowel Insertion UnitDowel prepositioning ensures high repeatability of inserting dowels for each hole; distance between the dowel insertion unit and the drilling spindle: 32 mm (1.3") For simultaneous drilling; dowel insertion when holes are spaced at 32 mm; standard dowel dimensions: 8 x 30 mm; Max. dowel projection: 14 mm (0.551"). Glue Tank: Holds up to 8 liters (3.1 gallons) of glue; max. glue density: 900 CPS.Glue inserting Unit: Flow sensor & electronic adjustment of the amount of glue. -- Operator InterfaceIndustrial numerical control with: Extremely simple Program Editor; macro & parametric programming. - Icon driven. -- Includes: Original Factory Machine Documentation. -- Actual Model: BIESSE ELIX B

Bob Bullin
800-374-5009 ext:346
Call

Call for Price

BIESSE - ROVER 37XL FT: w/ATC/Boring -- Specifications 5' x 12' Phenolic "MATRIX" grid vacuum Flat Table design for: "Nested Base" processing.Working Cap. -- "X" Axis: 243-1/2" (6,180 mm); "Y" axis: 72.8" (1,850 mm); "Z" axis stroke: 7.1" (180 mm).Positioning Speed -- X" & "Y" Axes: 328 FPM (100 MPM); "Z" axis: 98 FPM (30 MPM); "X" axis: Uses helical rack & pinion system; "Y" & "Z" axes use: Precision ball screws.All axes movement: Precision linear guides & ways; controlled by digital, brushless AC Servo motors; all motion components are maintained by an automatic lubrication system.Worktable -- Phenolic "MATRIX" grid vacuum table for: FT "Nesting" or single part processing using (optional) pods or jigs; (2) sides & (8) rear & (4) side pop-up pins for easy material location.Boring Unit -- (1) 4 HP (3.3 kW) - 4,000 RPM motor; (14) independent vertical spindles: (7) X-axes & (7) Y-axes; (6) horizontal spindles with: (2 + 2) in X-axis & (1 + 1) in Y-axis; (1) "X" axis grooving saw with: 150 mm dia. blade.Machining Unit -- (1) 16.3 HP (12 kW) HSD electro spindle router with: HSK F63 Adaptor; inverter driven 1,000 - 20,000 RPM with: Max. torque from 12,000 - 20,000 RPM.(1) 6-Position "Ride Along" Automatic tool changer for: "On-the-fly" ATC.Operatory Interface -- PC Front-End with: BIESSE "NC 1000 + WINDOWS "2000" operating system; 15" color CRT; 40 GB hard drive; full keyboard & mouse; Ethernet connection capabilities. Programs can be transferred via diskette or downloaded by wire.Built-in 1,500 W air conditioner for: Constant temperature & dust-free environment.Complete & supplied with: -- (1) 11 KVA stabilized autotransformer for: Voltages between 200 - 600 V; automatic "forced" lubrication system for: Guides & ball screw. -- Includes: Emergency stop rope & pressure sensitive safety mats that will instantly place machine in "pause cycle" when stepped on; sound absorbing protective head enclosure with: Debris curtain around bottom edge. -- Actual Model: BIESSE ROVER 37 XL FT.Note: There is "NO" Vacuum Pump with the machine.

Bob Bullin
800-374-5009 ext:346
Call

Call for Price

BIESSE ROVER 24 FTS FLAT TABLE MACHINE (W/ATC/BORING): -- Specifications:4' x 10' "Matrix" grid phenolic surface table for "Nested Base Manufacturing". -- Working Cap."X" Axis is 122" (3,100 mm), "Y" axis 49.2" (1,250 mm), "Z" axis stroke is 9.8" (250 mm).Max. material thickness of 6.1" (155 mm). -- Positioning Speed:"X" & "Y" Axis is 328 FPM (100 MPM), "Z" axis 98 FPM (30 MPM)."X" axis uses a helical rack & pinion system, "Y" & "Z" axes use precision ball screws.All axes movement is on precision linear guides / ways & controlled by digital, brushless AC Servo motors.All motion components are maintained by a lubrication system. -- Work area:Flat table design with "Matrix" grid phenolic surface for "Nested Base Manufacturing"; (2) independent working areas.(4) External pop-up reference pins: Reference pins are adjustable & can be placed on the front of the table, on the back of the table, on the RH side & on the LH side.Prepared for (optional) "quick fit" vacuum outlets for optional clamping of small or awkward shaped parts,Each work zone with (1) "quick connect" vacuum outlet for custom vacuum fixtures. -- Boring Unit:(1) 2.5 HP (1.7 kW) - 4,000 RPM Motor; (14) Independent vertical spindles, (7) in "X" axis & (7) in "Y" axis.(6) Horizontal spindles with: (2+2) in "X" axis & (1+1) in "Y" axis; (1) "X" axis grooving saw for max. 120 mm dia blade.(1) 6-Position "Ride Along" Automatic tool changer for "on-the-fly" ATC. -- Machining:(1) 10.2 HP (7.6 kW) Electro-spindle Router, variable speed from 1,000 - 20,000 RPM; -- Operator & Machine Control:PC Front End with: NC 1000" + WINDOWS "NT" operating system; 15" color CRT display.40 GB Hard drive; floppy & CD drives; full keyboard & mouse; Ethernet connection capabilities. -- Complete with:Universal Auto-Transformer for voltages between 200 - 600 V, 50/60 Hz.; Manuals, documents & safety perimeter devices. -- Actual Model is BIESSE ROVER 24 FTS.NOTE: The Vacuum Pump is NOT Included with this machine

Bob Bullin
800-374-5009 ext:346
Call

Call for Price

BIESSE ROVER A 2231 G FT FLAT TABLE MACHINE (W/LOADING, UNLOADING): -- Specifications:7' x 10' "Matrix" grid Phenolic surface for "Nested Base Manufacturing". Cell Configuration for sheets moving from the RH side to LH side of the line.The loading section is on the RH side, the offloading on the LH side from the operator standpoint. -- Working Capacity: "X" Axis 123 (3,130 mm), "Y" axis 86.6" (2,200 mm), "Z" axis stroke is 12.7" (325 mm), max. material thickness 4.7" (120 mm). -- Positioning Speed: "X" axis 262 FPM (80 MPM), "Y" axis 197 FPM (60 MPM), "Z" axis 66 FPM (20 MPM). All axes movement is on precision linear guides & ways and controlled by digital, brushless AC Servo motors. All motion components are maintained by an automatic lubrication system. "X" & "Y" Axes use a precision rack & pinion system; "Z" axis uses precision ball screws. -- Work area:Flat table design with HI-FLOW, multi-zone Matrix" grid Phenolic surface for "Nested Base Manufacturing". Automatic NC controlled zoning of the vacuum table with (16) individual zones. (2) Pneumatic "side" pop-up reference stops, (1) pneumatic "back" pop-up reference stop, & (1) pneumatic "front" pop-up reference stop. Prepared for (optional) "quick fit" vacuum outlets for optional clamping of small or awkward shaped parts; with "quick connect" vacuum outlet for custom vacuum pods & fixtures. -- Boring Unit:(1) 2.5 HP (1.7 kW) Motor, variable speed up to 6,000 RPM: Boring block with (10) independent vertical spindles, (7) in "X" axis & (3) in "Y" axis. (6) Independent Horizontal Spindles with (4+4) in "X" axis & (2+2) in "Y" axis. (1) "X" axis grooving saw for max 120 mm dia blade. -- Machining:(1) 18 HP (13.2 kW) Air cooled HSD Electro Spindle with HSK 63 adaptor, variable speed from 1,000 - 24,000 RPM. (1) 8-position ATC tool changer plate located at the back of the machine base. NC controlled presetting for the measurement of the tool length. -- Operator & Machine Control:PC Front-End with: BIESSE BH 660 + BiesseWORKS + BiesseNest + Windows XP/WRT operating system. 17" TFT Flat screen monitor; server, full keyboard, & mouse all mounted on a mobile cart; Ethernet connection capabilities. BiesseWORKS Graphic interface makes full use of the operating methods typical of the WINDOWS operating system: Assisted graphic editor used to program machining operations; programming, and guided creation of parametric macros. Import of CAD and other external software files in DXF & CID3 format; 3D simulation of the tool path, calculation of machining time & the ability to create rotate virtual faces. -- Complete with:(2) 300 m³/Hr BUSCH Vacuum Pump; Safety mats/devices & fencing; Tool touch-off probe for automatic program update according to the tool length. Automatic Lubrication System for linear guides, rack & recirculating ball screw. Tele-Service capabilities. -- Options Include: • (1) NC Controlled infeed Scissor Lift table with vacuum loading; • (1) Rake system; • (1) NC controlled & power

Bob Bullin
800-374-5009 ext:346
Call

Call for Price

BIESSE - ROVER 24 FTS: Flat Table Machine (w/ATC/Boring) -- Specifications4' x 10' "Matrix" Grid phenolic surface table for "Nested Base Manufacturing". -- Working Capacity"X" Axis is 122" (3,100 mm);"Y" axis 49.2" (1,250 mm); "Z" axis stroke is 9.8" (250 mm); max. material thickness of 6.1" (155 mm). -- Positioning Speed "X" & "Y" Axis is 328 FPM (100 MPM); Z-axis 98 FPM (30 MPM); "X" axis uses a helical rack & pinion system; "Y" & "Z" axes use precision ball screws.All axes movement is on precision linear guides & ways & controlled by digital, brushless AC Servo motors; all motion components are maintained by an automatic lubrication system. -- Work AreaFlat table design with: "Matrix" grid phenolic surface for "Nested Base Manufacturing"; (2) independent working areas.(14) External pop up reference pins with: (6) Pins on the front of the table: (4) On the back of the table; (2) on the RH side; (2) on the LH side.Prepared for (optional): "Quick fit" Vacuum outlets for optional clamping of small or awkward shaped parts; each work zone with: (1) "Quick Connect" vacuum outlet for custom vacuum fixtures. -- Boring Unit(1) 2-1/2 HP (1.7 kW) - 4,000 RPM Motor; (14) independent vertical spindles: (7) In "X" axis & (7) in "Y" axis.(6) Horizontal spindles with: (2 + 2) In "X" axis & (1 + 1) in "Y" axis; (1) 120 mm dia. "X" axis grooving saw.(1) 6-Position "Ride Along" Automatic tool changer for "on-the-fly" ATC. -- Machining(1) 10.2 HP (7.6 kW) Air-cooled electrospindle with: HSK F63 Adaptor; variable speed from 1,000 - 24,000 RPM. -- Operator & Machine ControlPC Front End with: NC 1000" + WINDOWS "NT" Operating System; 17" color CRT; 40 GB hard drive; full keyboard & mouse; Ethernet connection capabilities. -- Complete with:(1) 250 cbm/Hr Vacuum Pump; universal Autotransformer for voltages between: 200 - 600 V, 50/60 Hz; includes: Manuals, documents, safety mats, fencing. -- Actual Model is: BIESSE - ROVER 24 FTS.

Bob Bullin
800-374-5009 ext:346
Call

Call for Price

BIESSE - ROVER A 3.40 FT: Flat Table Machine (w/ATC/Boring) -- Specifications4' x 12' Flat Table with: "Matrix" grid phenolic surface for "Nested Base Manufacturing". -- Working cap:"X" Axis: 145" (3,683 mm); "Y" axis: 53-1/2" (1,360 mm); "Z" axis stroke: 6.3" (160 mm); max. material thickness 5.9" (150 mm). -- Positioning Speed"X" & "Y" Axes are: 262 FPM (80 MPM); "Z" axis: 98 FPM (30 MPM); helical rack & pinion drive on "X" axis; ball screw on: "Y" & "Z" Axis. -- Work AreaFlat table design with: "Matrix" grid phenolic surface for "Nested Base Manufacturing"; (2) independent working areas; (4) external pop-up reference pins with: (3) On the back of the table & (1) on the LH side.Prepared for: (Optional) "quick fit" vacuum outlets for optional clamping of small or awkward shaped parts; each work zone with: (1) "Quick connect" vacuum outlet for custom vacuum fixtures. -- Boring Unit (1) 2-1/2 HP (1.7 kW) - 4,000 RPM Motor: (12) Independent vertical spindles: (6) In "X" axis & (6) in "Y" axis.(6) Horizontal spindles with: (2 + 2) In "X" axis; (1 + 1) in "Y" axis; (1) 120 mm dia. "X" axis grooving saw. -- Machining(1) 10.2 HP (7.5 kW) Electrospindle with: ISO 30 Adaptor; variable speed from: 1,000 - 20,000 RPM.(1) 10-Position ride along tool changer plate for: "On the fly" ATC. -- Operator InterfacePC Front-End with: BIESSE "XP600 + WINDOWS "XP" Operating System; 15" color CRT; 40 GB hard drive; full keyboard & mouse; Ethernet connection capabilities. -- Complete with: Universal Autotransformer for voltages between 200 - 600 V, 50/60 Hz; (2) 10 HP; (7.5 kW) BUSCH Vacuum Pumps; safety mats & fencing. -- Actual Model: BIESSE ROVER A 3.40 FT.

Bob Bullin
800-374-5009 ext:346
Call

Call for Price

BIESSE - ROVER A 1564 G FT: "GANTRY"5' x 21' "Matrix" Grid phenolic surface for: Nested Base Manufacturing.Working Cap."X" Axis: 251.9" (6,400 mm); "Y" axis: 62.4" (1,585 mm); "Z" axis stroke: 12.7" (324 mm);, max. material thickness: 6.7" (170 mm).Positioning Speed"X" & "Y" Axis: 279 FPM (85 MPM); "Z" axis: 98.4 FPM (30 MPM). - All axes movement: On precision linear guides & ways; controlled by: Digital, brushless AC Servo motors.All motion components maintained by: Automatic lubrication system. "X" & "Y" Axes use: Precision rack & pinion system; "Z" axis uses: Precision ball screws.WorktableFlat table design with: Matrix grid phenolic surface for Nested Base Manufacturing; (2) external pneumatic pop-up reference stops in "Y" axis; (4) pneumatic pop-up reference stops in "X" axis; (2) zone tables with: Automatic NC controlled zoning of each vacuum table. Prepared for (optional): "Quick fit" vacuum outlets for optional clamping of small or awkward shaped parts; with: "Quick connect" vacuum outlet for custom vacuum pods & fixtures. Boring Unit(1) 2-1/2 HP (1.7 kW) Motor. Variable speed: up to 6,000 RPM; (10) independent vertical spindles with: (5) In "X" axis; (5) in "Y" axis. (4) Horizontal spindles with: (1 + 1) In "X" axis; (1 + 1) in "Y" axis; (1) "X axis grooving saw with: 120 mm Dia. blade.Machining(1) 16.1 HP (12 kW) Air-cooled HSD electro-spindle with: HSK F63 Adaptor; variable speed from: 1,000 - 24,000 RPM; (1) 16-position ride-along tool changer for "on the fly" ATC; NC controlled presetting for: measurement of the tool length. Operator & Machine ControlPC Front-End with: BIESSE "XP 600" + WINDOWS WRT Operating system. 15" TFT Flat screen monitor; server; full keyboard & mouse: All mounted on a mobile cart; Ethernet connection capabilities.Graphic interface makes full use of the operating methods typical of the Windows Operating System: Assisted graphic editor used to program machining operations; programming & guided creation of parametric macros. Import of CAD and other external software files in: DXF & CID3 format; 3D simulation of the tool path; calculation of machining time; ability to create rotate virtual faces.Complete with:25 HP TRAVAINI Vacuum Pump; safety mats & fencing; Tool Touch Off Probe; automatic lubrication system for: Linear guides; pads; recirculating ball screw; Tele-Service capabilities; Universal Autotransformer for: Voltages between 200 - 600 V 50/60 Hz.Actual Model: BIESSE ROVER A 1564 G FT.

Bob Bullin
800-374-5009 ext:346
Call

Call for Price

BLACK BROTHERS - APP 4016: 4' x 16' End Loading Fixed Pressure Air Pod Press, with Manual Opening AdjustmentSpecifications -- Platen size 50" x 194". -- Lower platen height: 16". -- Opening size: 4 - 60". -- Max. stroke: 5". -- Distance between tie rods: 54" Width & 64" length. -- Fixed air pressure: 10 PSI.Equipped with: -- Lower platen with Dual air-actuated roller tracks with: 2-1/4"; Dia. x 3/4"; W rollers on 6"; centers; automatic retraction when pressure is applied to stack & platen air is on. -- (12) 12"; Dia. Neoprene-covered fabric air pods. -- (24) Return springs. -- Manual opening adjustment.NOTE: Machine is palletized for shipping.Machine Dimensions: 199" x 72" x 108" H (at Max. Opening)Palletized Machine Dimensions: 199" x 50" x 54"; H

Torry Hiddema
800-374-5009 ext:371
Call

Call for Price

BLACK BROTHERS APP 4016 4' x 16' End Loading Fixed Pressure Air Pod Press, with Manual Opening AdjustmentSpecifications: -- Platen size 50" x 194". -- Lower platen height 16". -- Opening size 4 - 60". -- Max. stroke 5". -- Distance between tie rods: 54" Width & 64" Length. -- Fixed air pressure 10 PSI.Equipped with: -- Lower platen, with Dual air-actuated roller tracks with 2-1/4"; Dia. x 3/4"; W rollers on 6"; centers & Automatic retraction when pressure is applied to stack & platen air is on. -- (12) 12"; Dia. Neoprene-covered fabric air pods. -- (24) Return springs. -- Manual opening adjustment.Complete with: -- Operating, Servicing & Safety Instructions.Machine Dimensions: 199" x 72" x 108" H (at Max. Opening.)

Torry Hiddema
800-374-5009 ext:371
Call

Call for Price

BLACK BROTHERS APP 4016 4' x 16' End Loading Fixed Pressure Air Pod Press, with Manual Opening AdjustmentSpecifications: -- Platen size 50" x 194". -- Lower platen height 16". -- Opening size 4 - 60". -- Max. stroke 5". -- Distance between tie rods: 54" Width & 64" Length. -- Fixed air pressure 10 PSI.Equipped with: -- Lower platen, with Dual air-actuated roller tracks with 2-1/4"; Dia. x 3/4"; W rollers on 6"; centers & Automatic retraction when pressure is applied to stack & platen air is on. -- (12) 12"; Dia. Neoprene-covered fabric air pods. -- (24) Return springs. -- Manual opening adjustment.Machine Dimensions: 199" x 72" x 108" H (at Max. Opening.)

Torry Hiddema
800-374-5009 ext:371
Call

Call for Price

BLACK BROTHERS APP 4012 4' x 12' End Loading Fixed Pressure Air Pod Press, with Manual Opening AdjustmentSpecifications: -- Platen size 50" x 146". -- Lower platen height 16". -- Opening size 4 - 60". -- Max. stroke 5". -- Distance between tie rods: 54" Width & 82" Length. -- Fixed air pressure 10 PSI.Equipped with: -- Lower platen, with Dual air-actuated roller tracks with 2-1/4"; Dia. x 3/4"; W rollers on 6"; centers & Automatic retraction when pressure is applied to stack & platen air is on. -- (10) 12"; Dia. Neoprene-covered fabric air pods. -- (16) Return springs. -- Manual opening adjustment.Complete with: -- Operating, Servicing & Safety Instructions.Machine Dimensions: 148" x 72" x 108" H (at Max. Opening.)

Torry Hiddema
800-374-5009 ext:371
Call

$ 10,500

BLACK BROTHERS - 3004: Air Pod Press38″ x 50″ Platen Size. -- (9) 12″ Air bags. -- Manually adjustable daylight opening: Up to 36. -- Lower spring-loaded rollers for: Ease of loading & unloading. -- This Machine requires NO electrical connections; it only requires compressed air to operate.While it does have low use, this machine was reconditioned with the following items: Replaced: Air regulator; water separator (both high flow). Rebuilt the main ROSS Check Valve: Full internal replacement; shaft/seals/spring: Factory rebuild kit. NEW hand valve. (1) NEW Air bag; replumbed the top.NOTE: Paint is ...100% original to the machine.

Torry Hiddema
800-374-5009 ext:371
Call

$ 29,160

BLACK BROTHERS - 22-D-875-56, ...Roller Coater56" Nominal length; 8-3/4" dia. applicator, Chrome doctor roll, upper elevator and top only. -- Setup to 0" - 6" thick. -- Smooth EPDM applicator rolls and Chrome doctor rolls. -- Variable feed speed drive, pass line height 34". -- Drip Pan, Feed Pan, Continuous Flow Trough to be Stainless Steel or Teflon Coated. -- Trough for continuous flow 1" pneumatic pump and hose to supply product.Complete With: -- NEMA-12 Electrical enclosure, operating control bars, magnetic brake, electrical interlocks, reverse lockout and cleanup pan.

Scott Grissom
800-374-5009 ext:308
Call

$ 26,240

BLACK BROTHERS - 22-D-875-56, ...Roller Coater56" Nominal length; 8-3/4" dia. applicator, Chrome doctor roll, upper elevator & top only. -- Setup to 0" - 6" thick. -- Smooth Chrome applicator rolls and Chrome doctor rolls. -- Stationary feed speed drive, passline height 34". -- Drip Pan, Feed Pan, Continuous Flow Through. -- Trough for continuous flow 1" pneumatic pump and hose to supply product. -- (30) Day warranty for workmanship and manufacture's warranty for all parts used.Complete with: -- NEMA-12 Electrical enclosure, operating control bars, magnetic brake, electrical interlocks, reverse lockout, and cleanup pan.

Scott Grissom
800-374-5009 ext:308
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved