Woodworking Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 73
1454 Results Found
Sort By 
Recently Added Items
Stenner ST9
Call For Price
Stenner ST9
Pinheiro 630
Call For Price
Pinheiro 630
2005 D M C TOPSAND K TSK 135MS
$51,750
2005 D M C TOPSAND K TSK 135MS
Timesavers 2321-24-01
$21,890
Timesavers 2321-24-01
PREMIUM LISTINGS
2015 Guangzhou Hessan PUR Automatic Floor Laminating Line  Glue Equipment
$75,000

Guangzhou Hessan Woodworking Machinery Co., Ltd, HY-F-350 PUR Automatic Floor Laminating Line, 480 Volts 60Hz 3-Phase Lamination width: upto 350mm Thickness: 3-25mm Speed: 3-10m/min Dimensions: 6.8' High x 5' Wide x 72' Long Machine can laminate up to 17' long

 Hammond, IN
Brenco LLC
312-543-6505
Call

MZ Project Hopper 013  Bandsaw
$9,800

Cuts lengths up to 2,000 mm, max. size workpiece is 2,000 x 1,200 x 100 mm (78.7" x 47.2" x 4"); height of cut is from 0 - 100 mm (0" - 4") - Call for more details and similar equipment

 Jasper, IN
Machine Solutions, LLC
812-639-3527
Call

1985 Weinig U22A  Moulder
$7,500

1985 Weinig U22A Moulder, All Electrical, Just Taken out of Service, Was Working Daily, Delivery Available! $7,500 obo 585-335-5879/585-329-5875

 Dansville, NY
Dansville Logging & Lumber
585-335-5879
Call

Yates A20  Planer
$5,500

Yates A20 8” x 12” Planer, 6 head, motors needed and TLC needed for rebuild or used as parts machine, $5,500 – 719-843-0280

 Antonido, CO
Quality Timbers & Wood Products
719-843-0280
Call

Yates-American A20  Planer
$10,000

Yates A20 8” x 12” Planer, 5 head w/ top bracket, running condition, $10,000 - 719-843-0280

 Antonido, CO
Quality Timbers & Wood Products
719-843-0280
Call

STANDARD LISTINGS
2019 Dekker VMX0303KA1-00  Vacuum Pump
$18,000

20 HP VMAX oil-sealed liquid ring compact motor-mounted vacuum pump system, 300 CFM, max. 29" Hg; heavy duty construction, compact design, small foot print, patented, high-efficiency DX-5 separator eliminates oil carry-over concerns. -- Extended-life seal-fluid is not used as a lubricant. Change interval is not critical, resulting in a minimum of (10,000) Hrs. of continuous operation. Sturdy bearing pedestal mounts to standard NEMA, C-face motor. -- Direct drive low speed (1,750 RPM) eliminates the use of V-belts, resulting in very low maintenance and zero downtime. Continuous operation over the full vacuum range without overheating. Air cooled design and low operating noise level. -- Complete with: Inlet filter, 2-Year Warranty from date of shipment, provided the pump(s) are operated per instructions given in the Operations and Maintenance Manual.

Norm Schust
800-374-5009 ext:445
Call

2019 Dekker VMX0453KA1  Vacuum Pump
$21,970

DEKKER VMXO453KA1 Oil Ring/Sealed Vacuum Pump; 25 HP VMAX oil-sealed liquid ring, compact motor-mounted vacuum pump system. -- Specifications: 410 CFM rated cap. at max. 29" Hg; heavy duty construction, compact design, small foot print, patented. -- High-efficiency DX-5 separator eliminates oil carry-over concerns. Extended-life seal-fluid is not used as a lubricant. Change interval is not critical, resulting in a minimum of (10,000) Hrs. of continuous operation. -- Sturdy bearing pedestal mounts to standard NEMA, C-face motor. Direct drive low speed (1,750 RPM) eliminates the use of V-belts, resulting in very low maintenance and zero downtime. -- Continuous operation over the full vacuum range without overheating. Air cooled design and low operating noise level. -- Add ... $976 for 208 V. upgrade. -- Complete with: Inlet filter, relief valve, 3-Year Warranty from date of shipment, provided the pump(s) are operated per instructions given in the Operations and Maintenance Manual.

Norm Schust
800-374-5009 ext:445
Call

2007 Dekker VMX0550KW1-01  Vacuum Pump
Call for Price

DEKKER VMAX 40 HP Vacuum Pump (Liquid Ring); only 783 Hours:40 HP oil-sealed liquid ring compact motor-mounted vacuum pump system, 550 CFM, max. 29" Hg. -- Heavy duty construction:Compact design, small foot print, patented, high-efficiency DX-5 separator eliminates oil carry-over concerns; Engineered for continuous operation. -- Extended-lifeSeal-fluid is not used as a lubricant. Change interval is not critical, resulting in a minimum of (10,000) Hrs. of continuous operation. Sturdy bearing pedestal mounts to standard NEMA, C-face motor. -- Direct drive and with Low speed (1,750 RPM) eliminates the use of V-belts, resulting in very low maintenance and zero downtime.Over the full vacuum range without overheating. Air cooled design and low operating noise level.

Norm Schust
800-374-5009 ext:445
Call

2019 Dekker VMX0553KA1  Vacuum Pump
$25,400

40 HP VMAX oil-sealed liquid ring compact motor-mounted vacuum pump system, 550 CFM, max. 29" Hg; heavy duty construction, compact design, small foot print, patented, high-efficiency DX-5 separator eliminates oil carry-over concerns. -- Extended-life seal-fluid is not used as a lubricant. Change interval is not critical, resulting in a minimum of (10,000) Hrs. of continuous operation. -- Sturdy bearing pedestal mounts to standard NEMA, C-face motor. -- Direct drive low speed (1,750 RPM) eliminates the use of V-belts, resulting in very low maintenance and zero downtime. -- Continuous operation over the full vacuum range without overheating. -- Air cooled design and low operating noise level. -- Complete with: Inlet filter installed, Vacuum relief valve installed, 3-Year Warranty from date of shipment, provided the pump(s) are operated per instructions given in the Operations and Maintenance Manual. -- NOTE: 460 volt is standard. -- Add;... $1,275 for 208 volt and $1,206 for 230 V. upgrade

Norm Schust
800-374-5009 ext:445
Call

2000 Delle Vedove UVC/300 FUV  Finishing-Wood
$46,500

DELLE VEDOVE UVC-300/FUV 5 +3 Vacuum Coating Line3- or 4-Sided coating, 11-3/4" max. width x 2-1/4" max. height, 18" min. material length; substrate enters vacuum chamber via 6' conveyor belt & passes under the coating;Features: -- Variable feed speed from 20 - 200 FPM as the substrate leaves the chamber. -- Negative pressure in the chamber keeps excess fluid inside. -- Coating is run through several filters and sent back to the reservoir for use again. Equipped with: -- 15 HP Regenerative vacuum producer holds fluid inside vacuum chamber, -- 15-gal. cap. reservoir, -- Stainless steel vacuum chamber with adjustable substrate holddowns & guides, air operated diaphragm recylcing pump, high cap. fluid filter, separation tower with stainless steel baffle & filtering system; heavy gauge steel construction, and free-standing operator panel. -- 100% Coating efficiency; coating thickness controlled with a modulating valve & vacuum pressure gauge;Drying Tunnel: -- Curing is accomplished by means of UV oven Model "FUV 5+3" placed immediatley after the coater. Product leaves oven fully cured and ready to stack -- Uses waterborne coatings be it stains, primers, sealers, base coats, top coats or even fungicides; can be used to coat most solid materials, regardless of shape, size or length. -- Includes: Integrated operating control station, adjustable legs.Also included several templates for moulding shape

Dan Wolters
800-374-5009 ext:376
Call

Delta RS-15  Shaper
$2,950

DELTA Model RS-15 Spindle Shaper with 1-1/4" interchangeable spindle. -- 7.5 HP motor with (5) spindle speeds of 2,800 - 4,500 - 6,000 - 8,000 & 10,000 RPM -- Vertical spindle travel is 7-3/4", with 5-5/16" capacity under the nut. -- 35-1/2" x 43" fixed table with 13" max. table insert diameter. -- Complete with: Spindle reversing switch, spindle foot brake & lock, and adjustable fence.

Torry Hiddema
800-374-5009 ext:371
Call

Call for Price

1985 Delta RS-15  Shaper
Call for Price

7.5HP 3 phase motor 1.25" spindle w/all spacers Original Dual adjustable fence Wrenches & manual includes Delta/Invicta RS-15 Industrial Shaper, ready to load. According to seller, all adjustments work smoothly. Very well maintained machine. No bent or broken parts/pieces. Less than 1000th spindle run-out

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Delta 16A6  Radial Arm Saw
Call for Price

Rockwell Delta Radial Arm Saw, S/N FQ2780, Model, Model 16A6

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Delta 12 RAS  Radial Arm Saw
$1,500

Max. crosscut cap 14-3/8" wide x 4" deep @ 90ø and 24-1/4" rip cap. @ 90ø; 2 HP - 3,450 RPM motor, 12" dia. blade cap., 5/8" dia. arbor, saw head tilts 0ø - 45ø; saw carriage swivels 0ø - 180ø w/quick positive stops @ 45ø & 90ø; approx. 25-1/2" X 30" wooden table. -- Equipped with: Totally enclosed upper blade guard, gravity type lower blade guard, self-braking motor, magnetic controls, overload protection switch & push button station.

Jim Reedy
800-374-5009 ext:455
Call

Delta 36-L53L  Table Saw
$1,475

10" Blade cap., 5 HP motor - 3,450 RPM, 5/8" arbor, 2-1/8" depth of cut @ 45°, 3-1/8" depth of cut @ 90°. -- Equipped with: Large hand wheels for raise, lower, and tilting of the blade, T-Slot miter gauge for crosscutting large pieces. -- Includes: Magnetic starter, 4" dust collection outlet, operators manual.

Ed Webb
800-374-5009 ext:377
Call

1991 Delta 34-807  Table Saw
$1,500

10" Blade dia., 5 HP - 3,450 RPM motor belt drives 5/8" dia. arbor @ 4,000 RPM, arbor tilts 0ø - 45ø; 3-1/8" max. depth @ 90ø, 2-1/8" max. depth @ 45ø, 25" max. rip cap. to right of blade and 15-1/2" max. to left of blade, 13/16" max. dado width; 27" x 40" cast iron table, distance front edge of saw to blade 12-1/4", 34" table height. -- Equipped with: T-Square fence and magnetic controls.

Ed Webb
800-374-5009 ext:377
Call

Delta 46-522  Lathes and Carvers
$825

DELTA 46-522 Wood Lathe -- Specifications: 36" x 12" GAP bed deluxe lathe, 4-speed by belt pulley, 1 HP motor, magnetic controls, inside and outside face plates and center tool support.

 NORTHWEST, AL
EX-FACTORY INC.
704-841-2001
Call

2005 Detel M 2H 50  Boring Machine
Call for Price

2 Rows with 25-Spindles per row 32 mm Centers (2) 3 HP Motors Seller uses this macine on a weekly basis. They upgraded to a CNC Router and no longer need this unit.

Carolina Machinery Sales, Inc
704-288-1904
Call

1993 Detel M-22  Boring Machine
Call for Price

DETEL M-22 Construction Boring Machine (32 mm);(22) Spindle head, 2 HP motor - 3,000 RPM spindles on 32 mm centers. -- Drills vertically from the bottom and horizontally from the rear. -- Tilts pneumatically with switch control, graduated degree scale from 0° - 90°. -- 40" x 31" Table size, max. workpiece size 35-1/2" x 98-1/2". -- Complete with: (2) Overhead holddown clamps, frontal top stops, left & right side fence, line boring fence.

Ed Webb
800-374-5009 ext:377
Call

1997 Detel M-22  Boring Machine
$4,100

DETEL M-22 Construction Boring Machine (32 mm); -- (22) Spindle head, 2 HP motor - 3,000 RPM spindles on 32 mm centers. -- Drills vertically from the bottom and horizontally from the rear. -- Tilts pneumatically with switch control, graduated degree scale from 0° - 90°. -- 40" x 31" Table size, max. workpiece size 35-1/2" x 98-1/2". Complete with: -- (3) Overhead holddown clamps, frontal top stops, left & right side fence, line boring fence.

Ed Webb
800-374-5009 ext:377
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved