Woodworking Equipment For Sale

WEINIG P-22 Feed Through Moulder5-Head WEING Molder with a working cap. 9-1/16" x 4-3/4".Head sequence: -- Bottom 10 HP, right/left 10 HP, top 15 HP, and bottom 10 HP motor. -- Spindle dia. 1-1/2" with cutterhead speed of 6,000 RPM; mechanical spindle brakes all spindles. -- Mechanical digital readouts on all spindles; Digiset readouts on left & top spindles; mechanical readouts on chipbreaker & pressure elements of top spindles.Feed: -- Controlled feed speed from 16 - 78 FPM, 5.5 HP feed drive. -- Infeed straightening table 2 M (6-1/2"), fences, side holdover roller mounted to infeed table, manual Waxilit pump.Features: Reduced distance feed roller, protection against backlash when splitting, central location of lubrication points, and sound/safety enclosure. -- It comes with a large assortments of cutter heads 9 inch - 2 inch approximately (30) and it includes a lot of different knives for each of the heads

1st Head – Bottom– 40mm spindle – 11kw 8,000 RPM • Electronic digital display for radial adjustment Marathon Coating Table plates 2nd Head – Right – 40mm Spindle – 11kw 8,000 RPM 3rd Head – Left – Powerlock Spindle – 15kw 8,000 RPM Pressure shoe in front of left tool holder, incl. 2 lateral Pressure rollers, pneumatic. Vario hood (2 axes) Central adjustment of the pressure and guide elements before and after Left tool holder incl. electronic digital display. 4th Head – Right – Powerlock – 11kw 8000 RPM 5th Head – Top – Powerlock – 15kw 8000 RPM Vario hood (2 axes) Central adjustment of the pressure and guide elements before and after Upper tool holder incl. electronic digital display Split pressure shoe in front of upper tool holder, pneumatic Oscillating axial adjustment 6th Head – Top – Powerlock – 11kw 8000 RPM Vario hood (2 axes) Central adjustment of the pressure and guide elements before and after Upper tool holder incl. electronic digital display Split pressure shoe in front of upper tool holder, pneumatic Oscillating axial adjustment 7th Head – Bottom – Powerlock – 11kw 8000 RPM 8th Head – Right – Powerlock – 11kw 8000 RPM An additional pressure roller from above opposite 3rd right Tool holder, swing away for easy Tool change, pneumatic 9th Head – Left – Powerlock – 11kw 8000 RPM Vario hood (2 axes) Central adjustment of the pressure and guide elements before and after left Tool holder incl. Electronic digital display. Frequency controlled feed, 11 KW (6-36m/min 5 meter in-feed table Automatic lubrication pump Two driven rollers in the machine table, hardened Pressure rollers from above, pneumatic PowerCom Plus Software CNC controlled adjustment and positioning. Axial CNC – controlled adjustment and positioning of the Tool holders in connection with the Memory function or PowerCom. For tool holder no. • 2,3,4,5,6,7 Radial CNC – controlled adjustment and positioning of the Tool holders in conjunction with the memory function or PowerCom. For tool holder No. 3,4,5,6,7 CNC – controlled adjustment and positioning of the feed Automatic central lubrication of the oscillating Tool holders Two interior lights in the safety hood Comes with new Transformer.

Weinig Unimat 22AL Electrical Panel

Weinig Molder Electrical Panel U23 460V

WEINIG Powermat 1000 7-Head Feed Trough Moulder(B-R-L-T-T- B-U); working cap. 9-1/16" x 4-3/4". Head sequence: -- Bottom 15 HP, Right 15 HP, Left 15 HP, Top 30 HP, Top 40 HP , Bottom 30 HP, and Universal 15 HP motor. All motors with electronic brakes. WEINIG Touch-Screen "Power Com" -- PowerCom Plus software system features: Profile drawing storage, profile dimensions, tool changes and production optimization. -- Electronic LED readouts for all tool holder settings, including chip breakers & pressure elements.Spindle arrangement: -- Spindle #1: 1-13/16" w/Cutterhead speed of 8,000 RPM; -- PowerLock tool holders on #2 - #5 with 12,000 RPM, universal tool holder variable from 4,000 to 12,000 RPM and with high precision bearings; -- Adjustment of vertical tools 2-3/16" axially. -- Motorized tool positioning; radial & axial on tool holders #2 - #5; motorized feed beam adjustment with independent adjustment top head; top head with independent adjustment of chip breaker & pressure element. -- Universal spindle with 270° of movement.Feed System: -- Variable feed speed from 20 - 118 FPM, 7.5 HP inverter-controlled Cardan feed drive, overhead feed wheels with pneumatic pressure. -- Vertical tools with adjustable table plates to cutting circles, hardened infeed bed plates before & after 1st bottom head. -- Chromed tables and fences, (2) powered table rollers in bed and (1) between left and top spindles and (1) at outfeed. -- Infeed straightening table 2 M (6-1/2').Equipped with: -- Pedestal for machine controls separate from the electrical cabinet, central location of lubrication points. -- The safety hood, automatic table lubrication pump, and (2) lights inside the reinforced sound enclosure are electromagnetically interlocked, as is the phone modem..

6-Head (B-R-L-T-B-U); working cap. 9-1/16" x 4-3/4". -- Head sequence: Bottom 10 HP, right 15 HP, left 15 HP, top 25 HP, bottom 20 HP and universal 10 HP motor - all motors with electronic brakes. -- WEINIG Touch-Screen "Power Com" software system features: Profile drawing storage, profile dimensions, tool changes, and production optimization. -- Electronic LED readouts for all tool holder settings, including chip-breakers & pressure elements.Spindle configuration -- Spindle #1: 1-13/16" With cutter-head speed of 8,000 RPM; Power-Lock tool holders: #2 - #5 With cutter-head speed of 12,000 RPM and tool holder #6: variable speed 4,000 - 12,000 RPM. Adjustment of vertical tools 2-3/16" axially. -- Motorized tool positioning radial & axial on tool holders #2 - #5; motorized feed beam adjustment with independent adjustment of top head; top head with independent adjustment of chip-breaker & pressure element. -- Variable feed speed from 20 - 120 FPM, 10 HP inverter controlled Cardan feed drive, overhead feed wheels with pneumatic pressure. -- Vertical tools with: Adjustable table plates to cutting circles, hardened infeed bed plates before & after 1st bottom head. Equipped with: -- Chromed tables & fences, (2) powered table rollers in bed, (1) between bottom and universal spindles, and (1) at outfeed. -- Infeed straightening table 2 M (6-1/2'). -- Central location of lubrication points, electromagnetic interlocking of safety hood, manual table lubrication pump, and (2) lights inside reinforced sound enclosure and phone modem.

WEINIG PROFIMAT 23 Feed Through Moulder5-Head (B-R-L-T-B) Moulder with working cap. 9-1/16" x 4-11/16". -- Spindle sequence: Bottom 10 HP, right & left by 10 HP motor, top 15 HP, bottom 10 HP motor. -- Spindle diameter 1-1/2" with cutterhead speed of 6,000 RPM. All spindles equipped with mechanical digital readouts. Digi-set readouts on left and top spindles. Chipbreaker and pressure for left and top spindles with digital readouts. -- Feed: 4 HP Carden feed drive (chainless feed system), variable feed speed 18 - 78 FPM; (1) driven outfeed roller in bed. -- Equipped with: Infeed straightening table: 2 M (6-1/2') central lubrication system, central lubrication and full sound and safety enclosure. -- Extras: Includes manuals, used cutter-heads, many sets of assorted Knifes, and dust collection manifold. -- Machine is set up for 460V and it comes with a 230 V to 460 V step-up transformer -- Low hours, used for production of cabinet door rail and stiles components.

WEINIG UNIMAT 23 ATS, 6 HEAD MOULDER6-Head (B-R-L-T-T-B), working capacity 9-1/16" x 6" profiling. -- Head sequence: Bottom 10 HP, right & left by 15 HP, top 20 HP, top 15 HP and bottom 15 HP motor; Spindle dia. 40 mm with cutterhead speed of 6,000 RPM. -- WEINIG ATS (Automatic Tool Setting), Storage for up to (99) profiles; automatic positioning (radially) of left and top spindles (linked). -- Mechanical digital readouts on all other spindle adjustments for both axis, radial adjustment only on 1st bottom head. -- Motorized feed beam adjustment with independent adjustment of top heads, Receding chip breakers on left and top heads. -- Feed motor 7.5 HP, variable speed 18 - 118 FPM, overhead feed wheels with pneumatic pressure, (2) powered rollers in machine table. -- Large tool cutting circles, table plates adjustable to the cutting circle on vertical spindles with axial adjustment of 3-1/8" for multiple profiles. -- Infeed straightening table 2 M (6'6") with adjustable fence & adjustable outfeed table. Side pressure roller mounted to infeed table. -- Includes: Central lubrication, full sound/safety enclosure, manual bed lubrication pump.

270 Ton WEMHONER - 110"; L to R x 59"; F to B Down-Acting Hydraulic Press: Model KT-M-15/28-240. Clearance between frame is: 126"; L to R x 37"; F to B. -- Nominal bed: 110"; x 59";. -- 4-Clamp Cylinders are single-acting: Approx. 8"; Bore; 6"; dia. rods; approx. 10"; max. stroke. -- (1) Center traversing cylinder: Approx. 3" bore with a 1-3/4" diameter rod (approx. 16 max. stroke). -- Max. daylight: Approx. 16";. -- Approx. 28-1/2"; Operator height. -- Guided with rollers at each corner and (2) gear & rack guides. -- Slide and bed: 4" Thick; self-contained Hydraulic System: -- (2) Reservoirs: Approx. (14) gallons each. -- 4 kW Motor: Approx. 5 HP; 1,800 RPM, 440 Volts, 9.15 Amps. -- Pump: Type "R60A; max. 350 Bar, etc. -- Speeds: Approx. 99 IPM fast down; 2.0 IPM Pressing adj; 99 IPM fast up. -- NO Electrical Controls. -- Overall Dimensions: Approx. 146"; x 65"; x 96"; high. -- Approx. 30,000 Lbs.

Wemhoner Variopress

West Salem model 2420GR1-H wood grinder/hog 480 v Bottom discharge No screen - machine has breaking bars Disconnected and ready to ship

WESTERN PNEUMATICS HEAVY DUTY FINGER JOINTER WITH THE FOLLOWING EQUIPMENT & FEATURES: -- Right & Left Shaper Section: Thickness Capacity: 3/4" - 2" maximum; Width Capacity: 1-1/2" - 8" maximum; Length Capacity: 5" min. - 36" maximum; -- (2) Scoring Saws with 7-1/2 HP - 3,600 RPM motors; -- (2) Trim Saws with 7-1/2 HP - 3,600 RPM motors; -- (2) Shaper Spindles are hydraulically powered; direct driven @ 3,600 RPM by -- (1) 60 HP Hydraulic Power Unit with (1) cartridge unit per spindle. Hydraulic conversion was performed during the first year of operation. -- Western's 2-1/2" wide feed chain with lugs on 9" centers; 15 HP variable speed drive with up to 120-lug per min feed speeds; with angle transfer conveyor, air bag pressure head with quick-change feature & brush hold-downs -- APQUIP Extrusion Type Glue Applicator complete with mixing system. Currently arranged for 3/8 finger joints including (4) 3/8" glue combs -- Manual Corner Transfer to the assembly section. (allows for inspection and rejection of blocks for poor joint quality, missing proper glue spread, etc. prior to going into assembled boards) -- 12' Pre-Assembly Infeed Conveyor with feed speed ramp up/down; with side alignment rolls and dual top and bottom pre-assembly rolls -- Flying Cutoff Saw operating from below -- Assembly Press: 20' board capacity with hydraulically powered press -- Automatic Cycling Assembly Section: Feed speed varies automatically from 50 to 200 FPM, depending on incoming block lengths. Boards advance through the Cutoff Saw to a moveable limit switch where they are cut to length with a bottom-mounted 7-1/2 HP Flying Cutoff Saw arranged for continuous non-stop assembly. The cut to length board drops down into the squeeze chamber while the next board feeds out and above the preceding board where it is cut to length. Pressed lengths are pushed out onto material outfeed arms by the following board

WESTERN PNEUMATICS FJW2VS24 Heavy Duty Production Finger Jointer. Right & Left Shaper section:- Cap.: 5/8" - 2" Max. thickness, 1-1/2" - 8" max. width, 5" min. - 36" max. length.Equipped with for right and left side: -- (2) Scoring saws, 7-1/2 HP - 3,600 RPM motors, -- (2) trim saws, 7-1/2 HP - 3,600 RPM motors, --(2) shaper motors, 20 HP - direct drive 3,600 RPM motors. -- 6" Wide WESTERN feed chain, angle transfer conveyor and 15 HP variable speed drive with speeds up to (120) lugs per minute. -- Air Bag Pressure Head with quick change feature & brush holddowns -- APQUIP extrusion type glue applicator with meter mixing system -- Transfer to the assembly press via powered manual corner transfer -- 17' Extra length Assembly Infeed Conveyor with electronic ramp up/down infeed package, powered side alignment rolls and top and bottom pre-assembly rolls. -- Assembly Press: 14' (to be confirmed) finished board length, hydraulic squeeze board press and board ejection; with rapid stop-and-chop 7-1/2 HP heavy duty cutoff saw. With automatic cycling, -- Feed speed varies automatically depending on block and cutoff lengths, 50 - 200 FPM.Pieces advance through the cutoff saw to a moveable limit switch and are cut to length, arranged for continuous assembly, the cut to length piece drops down into a final squeeze chamber while the next piece is cut to length, finished lengths are pushed out hydraulically by the next piece onto material outfeed arms.Includes: -- Set of cutterheads and knivesNOTES: -- Machine for factory rebuilt in 2009 -- Machine will easily run 120 lugs per minute and 200 FPM at the Press -- Equipment has been maintained to factory standards since new -- Parts replacemennt (feed chain, sprocket, fences and more) in 2018 for a total of $28,500 -- Taken out of service in January 2025Riggers are required for loadingSome technical information needs to be confirmed by seller

WHIRLWIND 1000 R 14” Right-Hand Semi-Automatic Pneumatic Upcut Saw Specifications: Cutting cap. 2-3/16" x 8-1/4". Work area 12” x 22” x 36-1/2” H. Arbor dia. 1”. Blade speed 3,450 RPM. Cycle speeds 5 - 90 Cycles/Min. Equipped with: 5 HP - 1,740 RPM - 208 - 230/460 Dual voltage motor. 20-1/2” L x 1/2” H” Aluminum fence. Built-in foot pedal control. Complete with: TIGERSTOP “TS-10” 10' L Automated Material Pusher/Stop, S/N 1016705, with Overall length 12', 10” W x 12’ L x 36-1/2” H, Solid pusher/infeed table, 14-1/2” W x 10’ L x 36-3/4” H Solid outfeed table with 12’ L x 1-1/4” H Aluminum fence with scale, TIGERSTOP “CON5” Controller, with LCD Display, Touchpad, “VPK2” Software package (Optimization, Download, & Ethernet Connection), & TIGERSTOP “AMP5” Amplifier. Saw with Pusher/Stop Dimensions: 318” x 27” x 63” H. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i61 WHIRLWIND 1000 L Upcut Saw Specifications: 2-3/16" x 8-1/4" Cap., 14" blade cap., 3,450 RPM, left-hand unit feeding from right-to-left, 5 HP BALDOR motor. Complete with: (5 - 90) Cycles/Min; magnetic starter with low voltage controls, air filter, regulator, coalescing filter, and 4" dust chute. NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

Whirlwind Undercut Saw with Tiger Stop Fence

Whitney 105 Planer 24" Planer Used daily in current shop.

Whitney 105 Planer 24" Planer Used daily in current shop.

Williams 125 CJS1 Hammermill

Williams 125 HP Hammermill 230/460 3-phase