Dust Collection Systems For Sale
Category
Dust Collection Systems
243 Results Found
EXTREMA DCY-1220 L3 TYPHOON Cyclone Filtration Dust Collection System. -- Powerful two-stage dust collection drops out heavier dust particles through a Rotary Air Lock, allowing you to choose the disposal system, before passing finer particles through the fan and filter. -- Air volume rated @ 8,800 CFM. -- Unit includes; 20 HP Motor, with a Soft Start already wired in. -- Rotary air lock with a 1 HP motor @ 38 CFM. -- Low noise operation. -- Standard support frame LEG 3 164" clear height x 149" clear width x 91" clear depth. -- Return air filters also available.
EXTREMA DCY-1425 L3 TYPHOON Cyclone Filtration Dust Collection System. Powerful two-stage dust collection drops out heavier dust particles through a Rotary Air Lock, allowing you to choose the disposal system, before passing finer particles through the fan and filter. -- Free air volume rated @ 10,500 CFM. -- Low noise operation. Equipped with: -- 25 HP Motor, with a Soft Start already wired in. -- Rotary air lock with a 1 HP motor @ 38 CFM. -- Standard support frame LEG 3 164" clear height x 149" clear width x 91" clear depth. Other Options available: Return Air Filters (DCF-5) plus the pipe to connect the Cyclone with the filter and 460V electric rather than 230 Volt.
EXTREMA DCY-750.3 TYPHOON Cyclone Dust CollectorCyclone & fabric filtration dust collection system. -- Powerful two-stage dust collection drops out heavier dust particles through a 1/2 HP Rotary Air Lock (included), allowing you to choose the disposal system, before passing finer particals through the fan and filter. -- (2) Fabric filter bags placed above plastic collection bags. -- Air volume output rated @ 4,850 CFM with 7.5 HP Induction motor with 12" inlet. -- 14-3/4" Steel blower fan impeller and is dynamically balanced. -- Collection bag snap-in ring for easy addition or removal of plastic bag. -- Filter bags filter dust particles down to (1) Micron in size. -- Low noise operation. -- Includes: Standard support frame to allow use with a waste hopper under the cyclone.
EXTREMA DCF-04 Bag Filter. -- Features a 14" inlet; unit has (4) sections, (4) 1 micron filter bags with (4) plastic collection bags, rings, clamps and legs. -- Modular design enables additional sections to be added or removed. -- Excellent addition to the "DCY Typhoon" Dust Collector!
EXTREMA DCF-05 Bag Filter. -- Features a 16" inlet; unit has (5) sections, (5) 1 micron filter bags with (5) plastic collection bags, rings, clamps and legs. -- Modular design enables additional sections to be added or removed. -- Excellent addition to the "DCY Typhoon" Dust Collector!
EXTREMA DCF-327 Baghouse Dust Collector.Features a 16" inlet; unit has (3) sections with (9) socks per section. -- Filter Socks: 6" Dia. x 70-7/8" for greater air-to-filter ratio; (1) Micron filter. -- For indoor use. (Enclosed outdoor unit available). -- Excellent addition to the "DCY Typhoon" Dust Collector
EXTREMA DCF-327E Baghouse Dust Collector.Features a 16" inlet; unit has (3) sections with (9) socks per section. -- Filter Socks: 6" Dia. x 70-7/8" for greater air-to-filter ratio; (1) Micron filter. -- Available for outdoor & indoor use; unit is enclosed. -- Excellent addition to the "DCY Typhoon" Dust Collector; ...ask us why!
$ 16,500
Farr Tenkay 20LL - approx shipping dimensions 84" x 120" x 200" tall - includes blower, gauges, roll off collection bin,electrical, filters, intake duct - 5640 square foot filter area - 3 phase - $16500 CAN - Inlet and outlet -20", - has 12 3/4" X 34" long filter with a 14" X 16" mount, - the motor is a 40 HP Estimated 10000 CFM (16LL is rated 9000 CFM) This unit was in working order when finally shutdown, only was shutdown because building was demolished Call 800-459-2148 for more info.
FARR GOLD GSX12 DUST COLLECTOR: 6,200 - 6,800 CFM Rated cap., 3,384 sq. ft. filter area from (12) cartridge filters, approx. 2.3:1 air: cloth ratio, w/ Rotary Air Lock . -- Equipped with: 15 HP Pull thru motor; dirty air is pulled into the filter area at bottom of filter media section allowing gross dust particles to fall into collector barrels located beneath pyramidal hopper discharging to a Rotary Air Lock.. -- Fine dust is pulled up thru the cartridge filters; dust filter cartridges are cleaned by automatic pulse jet with minimum compressed air consumption; cleaned air continues thru blower and is returned to the building air supply thru a silencer.. -- Includes: Cyclone w/ Rotary Air Lock, electrical control panel, support stand with clearance under hopper & RAL discharge for a waste bin,. On filter unit there is an access door in main fan housing. Flanged 12" x 30" inlet, and flanged 14-3/4" outlet
FLEX-KLEEN 43/54 PSTL 225 III Pulse Jet Dust Collector. -- General Data: 36,000 ACFM (approx.) based on 3.73 to 1 Air-to-Cloth Ratio; Square baghouse design with (225) Rigid Pleated Polyester Filter Media. approx. 9,675 sq. feet of filter area, Cartridges are 54" high and 43 sq. of filter area, each. High entry inlet designed for about 20" WG of Static Pressure. -- Filter Cleaning: Plant compressed air supplied to manifold and diaphragm valves periodically supplies pulse jets to filter bags according to a controller. -- Discharge: Small 8"x8" RAL - Rotary Air Lock (was used on paper dust). -- Construction: V-shaped collection hopper discharges into a sealed RAL. -- Overall dimensions: TBA -- Actual model: 43/54 PSTL-225, Arrangement III. -- No Fan or Cyclone are included.
FLOW AIRE - DC-03, ...Cartridge Dust CollectorSpecifications: -- Holds (16) cartridge filters. -- Includes: New AirMax Premium Media Cartridge Filters - fire retardant. -- Total dilter media area: 3,616 sq/ft. -- Air-to-Media ratio @ 8,000 CFM: 2.21:1. -- Automatic Pulse Clean System with: Differential pressure gauge and sequencing control in enclosure. --Single Hopper outlet with Sealing Drum Cover Kit. -- Steel support structure. -- Includes: 20 HP Ground mount blower. -- Rated for :8,000 CFM. -- Motor starter & controls.Sold with a 6-Month Mechanical Warranty
7.5 HP 220/440 volt 3-phase wired 220 volt 10” dust inlet Total filter serface 261 sq. Ft. 99.9% effective at .2-2.0 microns 3468 cfm @4.3” static pressure
HENDRICK - PRO V, ...Dust CollectorSpecifications: -- 5 HP - 2,500 CFM. -- (2) High Efficiency 1/8" thick needle felt cloth bags up and (2) collection barrels down -- Complete with: Direct drive centrifugal fan assembly with 5 HP TEFC motor non-sparking Heavy-Duty cast aluminum impeller; (4) inlets, and motor starter.
7' x 23' Honeyville Bag House Dust Collecting System with Blower & Stand 86 10' Tubes, Ready to Ship.
$ 12,000
The pipes are included, the unit is in good shape, blower has a 14" inlet. Call 317-390-0176 for more info.
Dust cyclone, approx 36" dia x 6' tall, 8" inlet-10" outlet, includes stand and a few pipe adapters, excellent condition
IST (INTERNATIONAL SURFACE TECHNOLOGIES) BLAST 'ME-99C4-000/2DCM-160' Sandblaster, Chamber Cabinet and Dust Collector Line. Line consists of Automatic 24" Single Rotary Head Inline & Sandblast Cabinet and Dust Collector. -- Description: Single Rotary Head Inline Sandblast Cabinet -- Sandblasting head rotates and utilizes aluminum oxide blast media downward onto one side of a continuous feed belt conveyor. -- Feed belt width: 19-7/8". Accepts product up to 24" wide by approximately 12"; - 14" tall. -- Rotary head height adjustment is 0 - 6". Side gun oscillation travel is 0 - 8". -- Product exits from the machine with a “matte finish";. -- Spent aluminum oxide blast media is recycled through a bottom suction chamber for reuse. -- Machine includes an independent dust collector unit that dispenses particulate matter from the cabinet into a container for disposal. -- Sandblasting Cabinet Model: Single Rotary Head Inline Sandblast Cabinet -- Dust Collector Model: DCM-160 capacity is 1,600 CFM. -- Line is currently in operation and can be viewed.
IST (INTERNATIONAL SURFACE TECHNOLOTY) BLAST 'ME-99C3-0003/DCM-300' Sandblast Cabinet with Dust Collector. Consists of Automatic 74" Double Rotary Head Inline, Sandblast Cabinet, and Dust Collector. -- Description: Sandblasting heads rotate using aluminum oxide blast media downward onto a single side of a continuous feed belt conveyor. -- Feed belt width: 47-7/8". Accepts product up to 74" wide by approximately 5" tall. Abrasive: Aluminum Oxide 220 grit. -- Max part size is 72" width. Max weight 22 Lbs/sq ft. Conveyor speed 0 - 5 FPM.Compressed air needed 960 CFM @ 100 PSI. -- Product exits from the machine with a “matte finish";. -- Spent aluminum oxide blast media is recycled through a bottom suction chamber for reuse. -- Line includes an independent dust collector unit that dispenses particulate matter from the cabinet into a container for disposal. -- Sandblasting Cabinet Model: Double Rotary Head Inline Sandblast Cabinet -- Sandblasting Cabinet Serial Number: ME-99C3-0003 -- Dust Collector Model: DCM-300 with a capacity of 3000 CFM. -- Line is currently in operation and can be viewed.
IVISION VCE 1570 Industrial Vacuum Chip CollectorThe VCE 1570 is ideal for Double Head Saws or Miter Saws with (2) outlets.Features: -- The excellence of design and construction technique creates extremely handling-friendly and virtually maintenance-free units with innovative technical solutions to get the best possible performances. -- The sturdy material used and the simple design are additional characteristics, specially designed for industrial purposes, and is equipped with a powerful motor and a state-of-the-art filtering system. -- ideal for heavy dust or collection of steel, aluminum, and or any metal chips, including plastics, fiberglass, PVC.Specifications: -- Power: 2.7 HP -- Max flow rate: 2,400 CFM -- Inlet size: 4" or 6.2" or a 4" + 6.2", number (2). -- Tank Volume: 42.27 Gallons