Woodworking Equipment For Sale
1745 Results Found
Call for Price
Weinig Powermat 1000 Moulder - 8,000 rpm machine out of production 2/2024. Converted from 12,000 RPM. - Working cap.: 9-1/16” x 4-3/4” - Motors: B-15 HP, R-15 HP, L-15 HP, T-30 HP, T- 40 HP and B-30 HP. - Spindles/Tool Holders: Spindle 1-13/16" at 8,000 RPM; HSK tool holders 2-6 8,000 RPM. Motorized tool positioning for tools 2-6 Radial and Axial. - CNC: WEINIG Power Com "Touch Screen” PLUS software with tool data storage 300 profiles, profile data and tool monitoring. Led readouts to all spindles/tool holders; including chipbreaker’s and holddown’s. Modem for external diagnostics. - Feed: Variable inverter drive speed with 7.5 HP motor with speeds from 18-118 FPM. - Infeed/Tables: 2M (6'-6”) infeed table with side pressure roller, AUTO table lubrication and chromed tables and fences.
Call for Price
Call for Price
Weinig Unit 318 Moulder 9" Machine 6-Head Low hours! Also available: Weinig R960 Grinder and tool room
Call for Price
Weinig Powermat 1500 Moulder 6-head Machine Manufacturer specs (to be confirmed): Operating voltage (single) 460 Volt, 60 Cycles Tool arrangement no. 013 Working width 20 - 230 mm FIRST BOTTOM - Motor 11 KW (15 HP) / 1 13/16" / 6000 rpm Marathon coating for table insert RIGHT VERT - Motor 11 KW (15 HP) / 7000 rpm Diameter 40mm Setting range axial 80mm LEFT VERT - Motor 11 KW (15 HP) / 8000 rpm Vario hood (2 axes) Pressure shoe in front of left, incl. 2 lateral rollers, spring-mounted Setting range of the feed rollers opposite left tool holder Pressure roller from above, pivoting, spring loaded Axial / Radial CNC-controlled adjustment SECOND RIGHT - Motor 11KW (15 HP) Fence lip before and after the right vertical spindle Axial / Radial CNC-controlled adjustment FIRST TOP SPINDLE-MOTOR 22 KW (30HP) - 7000 rpm Vario Hood (2 axes) Split pressure shoe in front of top spindle with Axial / Radial CNC-controlled adjustment SECOND TOP - Motor 18.5 KW (25HP)/ 7000 rpm Split pressure shoe in front of top spindle Axial / Radial CNC-controlled adjustment Top spindle prepared cassette system. LAST BOTTOM - Motor 22 KW (30 HP) / 7000 rpm Adjustment range axial & radial FEED SYSTEM - Motor 7 KW (9.5 HP) / 5 - 40 m/min. Feed roller in front of 1st bottom, pneumatic up-down Electrical up-down adjustment of the feed bar Two interior lights in the safety hood Remote Lock out / Tag out Lateral pressure roller at the infeed table, spring-mounted Guiding fence after the left vertical spindle 6 mm thick PowerCom Plus Improved sound insulation MACHINE CHANGE: 06.10.2019 - Please be aware that the VarioHood assembly on the 1st Top Spindle was moved to the 2nd Top Spindle position. The 2nd Top Standard Hood was moved to the 1st Top Spindle Position. This move will impact the parts relating to the Aspiration Hood, ChipBreaker and Pressure Shoe elements. Please use caution when looking up replacement parts. This machine change was performed by WUSA technicians
$ 16,900
WEINIG Profimat 23 E 5-Head Moulder5-Head (B-R-L-T-B) with working dimensions 9-1/16" x 4-3/4". -- Spindle sequence: Bottom 10 HP, right/left 10 HP, top 15 HP, and bottom 10 HP motor. -- All motors with mechanical spindle brakes. -- Spindle dia. 1-1/2" with cutterhead speed of 6,000 RPM. -- Equipped with Mechanical digital readouts for all spindles, and Digiset readouts for left and top spindles. -- Feed motor 4 HP with speed of 20 - 76 FPM. -- Table inserts for right & left spindles for the running of narrow stock; outfeed table roller. -- Infeed table 2 M (6-1/2') -- Manual Waxilit pump, central lubrication from front of the machine. -- Includes BEN-200 Mahros Horizontal Roller Feeder for moulder infeed, as shown in photos.Seller is also including Heads and Knives with this machine.
Call for Price
Manufacturer Specifications Weinig 5 Head (B-R-L-T-B) P26 S Super Moulder with 9-1/16" x 4-11/16" capacity. Head sequence: - Bottom 10 HP - right & left 10 HP - Top 10 HP and bottom 10 HP Technical Specifications - Grooved bed moulder - Mechanical brakes on all spindles - 460V three phase - Spindle dia. 1-1/2" with cutterhead speed of 6 000 RPM - mechanical digital readouts all spindles - Feed motor 5 HP - variable speed of 20 - 78 FPM
$ 14,200
Weinig Quattromat Q23V 4-Head Through Feed MoulderHead Configuration : (B-R-L-T) Profile or "S4S" Moulder,Specifications: -- 9-1/16" x 4-3/4" cap. -- Spindle sequence: Bottom 5.5 HP, right / left heads 7.5 HP , top 5.5 HP motor. -- Spindles 1-1/2" dia. at 6,000 RPM, mechanical digital readouts for setting accuracy. -- Feed speed of 26 FPM, 1 HP feed drive, direct drive.Equipped with & Features -- 6'- 6" Infeed straightening table with adjustable fence, table inserts for right and left heads. -- Sound insulated safety hood.Technical specifications: -- Machine dimensions 120" x 48" x 62", -- Electrical requirement (95 Amps) at 230 volts, 60cy. 3ph., -- Dust collection 4,500 CFM and Shipping weight 3,500 Lbs.
Call for Price
$ 33,500
$ 26,900
WEINIG PROFIMAT 22N Feed Through Moulder/Grinder Package Specifications: -- 5-Head (B-R-L-T-B), working width 8-5/8" x 4-3/4". -- Head sequence: Bottom 10 HP, right/ left 10 HP, top 15 HP, and bottom 10 HP motor. -- Spindle dia. of 1-1/2" with cutterhead speed of 6,000 RPM. -- Features: Mechanical digital readouts on all spindles; Digital readouts on left & top spindle. -- Feed speed variable from 18 - 78 FPM, 3 HP feed drive. (1) Powered table roller in machine bed at out feed. -- Complete with: Infeed straightening table 2 M (6'-6") and side pressure roller mounted to infeed table. -- Manual table lubrication pump, manuals sound & safety enclosure and dust collection manifold . -- Includes seventeen heads, extra feed wheels and neoprene feed wheels, as shown in Photos. -- Seller is also including the Owner's Manual.WEINIG RONDAMAT 934 Profile Grinder: -- 9" Arbor length, 11-1/2" max. tool dia., 1.5 HP motor, tilting head assembly for back relief grinding, clearance angle on peripheral of tools 10° - 30° and to each side 0° - 20°. -- Variable feed speed 1,800 - 3,000 rpm via a vari-speed gearbox, on-board wheel dressing, 9" max. wheel dia.; 0.16 HP coolant pump with built-in coolant tank. -- Includes: Operators manual, clamping nut, and pull-off bolt, 1-1/2" arbor, and an extra set of grinding wheels and toolingWEINIG OCMS measuring stand (not shown): -- With a working width of 300 mm. -- The allowable tool dimension of 3" to 11-3/4" head diameter. The measuring stand allows for electronic measuring and indicating of cutter head dimensions with electronic digital readouts; visually establishing the tool measurement, no setting errors, and no expensive CNC control. -- Magnifier screen viewer with 20:1 magnification; the cutterhead is placed in Powerlock tool post, all the operator does is view the scope and move the measuring carriage via precision dialing left to right. -- Measured values (radial) and (axial), tool dimensions both minimum and maximum are displayed. -- Includes: 1-1/2" arbor.These machines came out of a Mom and Pop shop and have been very well maintained. Both machines are in great working condition, and have no running issues.
Call for Price
Weinig Profimat 23E 5 head moulder Bottom Right Left Top Bottom Complete with Weinig Rondamat 950 profile grinder. 460 volt 3-phase Clean machines from a low volume specialty shop.
WEINIGUnimat500ClassicFeed Through Moulder; --5-Heads, working capacity 230 x 120 mm(9-1/16" x 4-3/4"). -- Head Sequence: Bottom4 kW (5.5HP), right& left4 kW (5.5 HP),top5.5 kW(7.5 HP), top 5.5 kW (7.5 HP), and bottom4 kW (5.5 HP) motor. -- Spindles: Dia.40 mm (1-9/16")with cutter head speed of 6,000 RPM;digital readouts on spindle adjustments in combination with the WEINIG MEMORY SYSTEM. Motorized height & width adjustment of spindles. Tool diameter 1st spindle min/max 125-145 mm (4-15/16" - 5-11/16"), other heads 112-200 mm (4-7/16" - 7-7/8"). -- WEINIG Powerlocktool holding system on top heads. -- Motorized feed beam adjustment with independent adjustment of top heads, receding chip breakers on left and top heads. --Variable feed speed5 to 30 m/Min (16-98 FPM), driven by 5 kW (7.5 HP) motor. Overhead feed wheels with pneumatic pressure. Cardan drive. -- MachineTables: Made of hardened steel. Infeed straightening table is 2,000mm (6.5') with adjustable fence & adjustable outfeed table; (1)side pressure roller mounted to infeed table. -- Complete with: WEINIGMEMORY SYSTEM-reduces set-up time by storing spindle positions and tool radii.Central lubrication. Full sound/safety enclosure with illumination inside. Manual lubrication pump. Automatic star delta starters. CE Compliance. (2) Emergency stop buttons. --Actual model is WEINIG Unimat500ClassicFeed Through Moulder; 6-Heads --Price mentioned is landed US port. ...we just added $5,000 to partially cover the extreme increase in Ocean freight. (...04/03/2022 JS). --Note:EX-FACTORY’s Logistic Department is experienced and setup to provide “Full Service Logistic” from Overseas Suppliers to your Door. …Packaging, Container Loading, Ocean Freight, Marine Insurance (door to door), US or Canadian Customs, Duty and domestic shipping to your Plant Door.
Call for Price
Call for Price
Model ODW Pressing area 5’ x 8’ electric to hot oil heat 2 trays for continuous production Siemens control
Call for Price
Wemhoner Variopress Basic 1000 Plus Model KT-MB-28/MB/15-240 Single Daylight Upstroke Hydraulic Press Max. Opening 2,540mm X 1250mm ( 100” X 49” ) 2 Trays Pin System 3D Application Foil Types PVC, PET, PP,ABS, Veneer And HPL Total Press Capacity 240 Tons Top/Bottom Heated Platens Working Height Approx. 900 mm (35.4”) Daylight Opening 150mm (5.9”) Upper Platen Heated by Thermal Oil Circulation 6 Cyclinder 125mm ( 4.9”) Diameter Total Press Pressure 2,400 KN Two Tray System with Pin System Tables arranged in over-under Configuration with Scissor Lift entering and exiting press on the same End Vacuum Pump and Vacuum Tank Foil Roll Storage Carousel ( Paternoster) for Vinyl Rolls Programmable Logic Controller PLC Model Siemens Simatic S7 Setting Parameters and operation of Pin System Year 2005 AS NEW CONDITION 460 volt 3 phase
Call for Price
WESTERN PNEUMATICS FJE 430R Medium Production Finger Jointer SystemRight and left Shaper Section with Automatic crossover model FJE 430 RCSpecifications: -- Material Thickness Capacity: 5/8” – 2” -- Material Width Capacity: 1-5/16” to 8” -- Material Length: 4” – 28” -- Feed Capacity 30 - 60 Lugs Per Minute -- Lugs are Space on 12” Centers -- Feed Motor: 10 HP -- Variable Speed Feed from 30 - 60 FPM -- Scoring Saw Motors: 3 HP -- Trim Saw Motors: 5 HP -- Cutterhead Motors: 15 HP -- Manual Transfer Corner -- APQUIP Glue Applicator -- Assembly Press w/ 16’ Max. Cut-off Capacity, Model AMS 248 LB -- Assembly Section Feed Variable Up to 150 FPM -- Self-Contained Hydraulic Unit -- 7.5 HP Cut-off Saw -- Board Press, Model BPS 216 RC -- Standalone Control Cabinet -- Touchscreen PLC Control
$ 6,450
WHIRLWIND - 855, Dual Table Oscillating Edge SanderDouble-sided with 8" x 56" platens size.Specifications: -- 7.5 HP - 1,725 RPM TEFC Motor, abrasive belt size of 8" x 151"; approx. (150) oscillations/Min with 3/8" stroke. -- 11" x 55" Side table, tilts 0° - 45° with 8" vertical adjustment; tiltable end table; iron frame machine base. Complete with: -- Magnetic electrical controls w/overload protection, dust hood on drive end, and all standard equipment.
Call for Price
Call for Price
Model: 1000L From left to right feed Blade Capacity: 14 Cutting Capacity: 2-3/16 x 8-1/4 OAD: 25"L x 25"W x 45"H Also Included Tiger stop