Dust Collection Systems For Sale

EXTREMA DC-4100 Baghouse Dust CollectorThe "DC-4100" baghouse dust collector is designed to achieve maximum airflow with a superior filtration area. This is achieved by using (36) smaller diameter filter bags to have more filter media in the same space as other similar dust collectors of its size. More filter area means better airflow with less filter maintenance. A manual bag shaker is included.The DC-4100 meets the NFPA664 CFM requirements for indoor dust collectors. The compact design allows this maximum filtration unit to use a depth of less than three and one half along a wall. The 10HP main motor has a dynamic balanced impellor and a magnetic starter is included.Specifications: -- With a 10 HP motor and a 5,000 CFM @ 7" WG and 361 Sq/ft of filter media. -- 10 HP - 1,750 RPM TEFC Motor, (36) Beane material filter bags and magnetic starter. -- Features: Easy installation, typically (1) hour; quiet operation, (3) waste discharge points. Inlet opening 12".

Farr Tenkay 20LL - approx shipping dimensions 84" x 120" x 200" tall - includes blower, gauges, roll off collection bin,electrical, filters, intake duct - 5640 square foot filter area - 3 phase - $16500 CAN - Inlet and outlet -20", - has 12 3/4" X 34" long filter with a 14" X 16" mount, - the motor is a 40 HP Estimated 10000 CFM (16LL is rated 9000 CFM) This unit was in working order when finally shutdown, only was shutdown because building was demolished Call 800-459-2148 for more info.

FARR GOLD GSX12 DUST COLLECTOR: 6,200 - 6,800 CFM Rated cap., 3,384 sq. ft. filter area from (12) cartridge filters, approx. 2.3:1 air: cloth ratio, w/ Rotary Air Lock . -- Equipped with: 15 HP Pull thru motor; dirty air is pulled into the filter area at bottom of filter media section allowing gross dust particles to fall into collector barrels located beneath pyramidal hopper discharging to a Rotary Air Lock.. -- Fine dust is pulled up thru the cartridge filters; dust filter cartridges are cleaned by automatic pulse jet with minimum compressed air consumption; cleaned air continues thru blower and is returned to the building air supply thru a silencer.. -- Includes: Cyclone w/ Rotary Air Lock, electrical control panel, support stand with clearance under hopper & RAL discharge for a waste bin,. On filter unit there is an access door in main fan housing. Flanged 12" x 30" inlet, and flanged 14-3/4" outlet

FLEX-KLEEN 43/54 PSTL 225 III Pulse Jet Dust Collector. -- General Data: 36,000 ACFM (approx.) based on 3.73 to 1 Air-to-Cloth Ratio; Square baghouse design with (225) Rigid Pleated Polyester Filter Media. approx. 9,675 sq. feet of filter area, Cartridges are 54" high and 43 sq. of filter area, each. High entry inlet designed for about 20" WG of Static Pressure. -- Filter Cleaning: Plant compressed air supplied to manifold and diaphragm valves periodically supplies pulse jets to filter bags according to a controller. -- Discharge: Small 8"x8" RAL - Rotary Air Lock (was used on paper dust). -- Construction: V-shaped collection hopper discharges into a sealed RAL. -- Overall dimensions: TBA -- Actual model: 43/54 PSTL-225, Arrangement III. -- No Fan or Cyclone are included.

FLOW AIRE DC-03 Cartridge Dust collectorSpecifications: -- Holds (16) cartridge filters. -- Includes New AirMax Premium Media Cartridge Filters - fire retardant. -- Total Filter Media Area: 3,616 sq. ft. -- Air-To-Media Ratio @ 8,000 cfm: 2.21:1. -- Automatic Pulse Clean System with differential pressure gauge and sequencing control in enclosure. --Single Hopper Outlet with Sealing Drum Cover Kit. -- Steel Support Structure. -- Includes: 20 HP Ground Mount Blower. -- Rated for 8,000 cfm. -- Motor Starter & Controls.Sold with a (6) month mechanical warranty

7.5 HP 220/440 volt 3-phase wired 220 volt 10” dust inlet Total filter serface 261 sq. Ft. 99.9% effective at .2-2.0 microns 3468 cfm @4.3” static pressure

HENDRICK PRO V Dust CollectorSpecifications: -- 5 HP, 2,500 CFM. -- (2) High Efficiency 1/8" thick needle felt cloth bags up and (2) collection barrels down -- Complete with: Direct drive centrifugal fan assembly with 5 HP TEFC motor non-sparking Heavy Duty cast aluminum impeller; (4) inlets, motor starter

Honeyville bag house, includes filters, very good condition

7' x 23' Honeyville Bag House Dust Collecting System with Blower & Stand 86 10' Tubes, Ready to Ship.

IST (INTERNATIONAL SURFACE TECHNOLOTY) BLAST 'ME-99C3-0003/DCM-300' Sandblast Cabinet with Dust Collector. Consists of Automatic 74" Double Rotary Head Inline, Sandblast Cabinet, and Dust Collector. -- Description: Sandblasting heads rotate using aluminum oxide blast media downward onto a single side of a continuous feed belt conveyor. -- Feed belt width: 47-7/8". Accepts product up to 74" wide by approximately 5" tall. Abrasive: Aluminum Oxide 220 grit. -- Max part size is 72" width. Max weight 22 Lbs/sq ft. Conveyor speed 0 - 5 FPM.Compressed air needed 960 CFM @ 100 PSI. -- Product exits from the machine with a “matte finish”. -- Spent aluminum oxide blast media is recycled through a bottom suction chamber for reuse. -- Line includes an independent dust collector unit that dispenses particulate matter from the cabinet into a container for disposal. -- Sandblasting Cabinet Model: Double Rotary Head Inline Sandblast Cabinet -- Sandblasting Cabinet Serial Number: ME-99C3-0003 -- Dust Collector Model: DCM-300 with a capacity of 3000 CFM. -- Line is currently in operation and can be viewed.

IST (INTERNATIONAL SURFACE TECHNOLOGIES) BLAST 'ME-99C4-000/2DCM-160' Sandblaster, Chamber Cabinet and Dust Collector Line. Line consists of Automatic 24" Single Rotary Head Inline & Sandblast Cabinet and Dust Collector. -- Description: Single Rotary Head Inline Sandblast Cabinet -- Sandblasting head rotates and utilizes aluminum oxide blast media downward onto one side of a continuous feed belt conveyor. -- Feed belt width: 19-7/8". Accepts product up to 24" wide by approximately 12” - 14" tall. -- Rotary head height adjustment is 0 - 6". Side gun oscillation travel is 0 - 8". -- Product exits from the machine with a “matte finish”. -- Spent aluminum oxide blast media is recycled through a bottom suction chamber for reuse. -- Machine includes an independent dust collector unit that dispenses particulate matter from the cabinet into a container for disposal. -- Sandblasting Cabinet Model: Single Rotary Head Inline Sandblast Cabinet -- Dust Collector Model: DCM-160 capacity is 1,600 CFM. -- Line is currently in operation and can be viewed.

IVISION VCE 1570 Industrial Vacuum Chip CollectorThe VCE 1570 is ideal for Double Head Saws or Miter Saws with (2) outlets.Features: -- The excellence of design and construction technique creates extremely handling-friendly and virtually maintenance-free units with innovative technical solutions to get the best possible performances. -- The sturdy material used and the simple design are additional characteristics, specially designed for industrial purposes, and is equipped with a powerful motor and a state-of-the-art filtering system. -- ideal for heavy dust or collection of steel, aluminum, and or any metal chips, including plastics, fiberglass, PVC.Specifications: -- Power: 2.7 HP -- Max flow rate: 2,400 CFM -- Inlet size: 4" or 6.2" or a 4" + 6.2", number (2). -- Tank Volume: 42.27 Gallons

2 HP motor 220 volt single phase

KING CANADA KC-3105C 1,200 CFM Single-Bag Portable Dust CollectorSpecifications: -- Cloth filter bag size 20" Dia. x 34-1/2" L, Cloth collector bag size 20" Dia. x 34-1/2" L. -- Inlet dia. 6", Outlet dia. 5".Equipped with: -- (4) Swivel casters.Complete with: -- 6" - 4" Dia. Dust Hose Y-Fitting.

KING CANADA KC-3105C 1,200 CFM Single-Bag Portable Dust CollectorSpecifications: -- Cloth filter bag size 20" Dia. x 34-1/2" L, Cloth collector bag size 20" Dia. x 34-1/2" L. -- Inlet dia. 6", Outlet dia. 5".Equipped with: -- (4) Swivel casters.Complete with: -- 6" - 4" Dia. Dust Hose Y-Fitting.

KEN MILLER ENGINEERING 12 BAG Dust Collector w/ Airlock and AugerSpecifications: -- 20 HP CORAL blower. -- 14" Inlet. -- (12) Filter bags. -- Air Lock w/ 1 HP auger for waste removal.

KRAEMER B21/40 Shaker Style Rectangular Baghouse. -- General Data: 10,889 CFM Square Baghouse with (6) 55-gal. barrel waste collection underneath (barrels not incl.), 1,406 sq. ft. of filter media from 5" dia. polyester filters (washable) for mixed dust, 1.0 TEFC HP motor for mechanical shaker bag cleaning. -- Equipped with: KRAEMER 23" Material Handling Blower ground-mounted blower belt driven by a 40 HP TEFC. -- Includes: Support legs (not shown), panels forFilter Access/Explosion doors, Electrical Control Panel with motor starters. Msc. piping if you want it.. -- Overall dimensions of housing 112" by 112" by 148" Ht. Weight of housing about 3,500 Lbs.

KRAEMER A/26/75 Dust Collector - Bag House type with Hopper:19,000 CFM at 14" SP; approx. 2,200 sq. ft. of filter media from (160) 8" dia. x 82" long polyester filters (washable) for mixed dust. -- (2) 1 TEFC HP motors for mechanical shaker bag cleaning. -- 75 HP TEFC Blower motor, Sheldons Eng blower with DAW air wheel, on clean air side, pull through unit (chips and debris are not run through the fan blades), fan/motor are floor mounted, 26" dia. Fan inlet. -- Screw conveyor with 9' LH/RH auger feed to 18" Rotary Air Lock, 1.5 HP rotary air lock motor unit for continuous waste removal.Equipped with & Includes: -- Support legs, panels for filter access, inlet back draft damper. -- Easy hinged access door and walk-in to filter section. -- Safety ladder and work platform w/railings. -- OSHA guards and sprinkler connector.Features: -- Explosion proof doors and sprinkler connection, --Controls includes Wye-Delta fan motor starter and timer for shaker motor.NOTE: Actual model is KTM AA 26/75; Fan is floor mounted.

KUFO LS-1000E Self-contained Dust CollectorDesigned for use in industrial environments for extracting different kinds of dust and dry shavings from single or multiple dust sources. It can be installed directly without any additional fire or explosion protection measures.Specifications: -- 10 HP Direct drive blower with backwardly curved blades and 5,600 CFM air flow rating; Inlet dia. 12". -- 5 Micron Top Filters -- Blower is located on the clean air side. -- Top sound reduction cover at 83 db from original 90 db. -- Fire control system with built-in Fire Sprinkler featuring auto-temperature activation (requires a water line hook-up). -- Pulse jet filter cleaning with compressed air. -- (2) Dust collection tank containers.Options: -- Built in Fire Extinguisher (2) with auto temperature activation. -- "Y" Adapter with 9-3/4" inlet opening with 4" x (5) fitting.

KUFO UFO-104HT Dust Collector4-Bag self-contained free-standing unit (2 up & 2 down, all cloth), 23-3/4" dia. bags. -- Features: 4,238 CFM, 10 HP Motor. -- Bottom mounted 6-manifold inlet branch with (6) 5" inlets connect to a 9.5" dia. inlet. -- Complete with: (2) Upper filter bags 2.5 micron and (2) lower cloth collector bags 2.5 micron, lower collector bags have 21 cu. ft. storage cap. each (42 cu. ft. total) -- Equipped with: Push button starter.