Woodworking Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 72
1440 Results Found
Sort By 
Recently Added Items
Unknown
Call For Price
Unknown
Unimove CM500
Call For Price
Unimove CM500
2001 Holzma Optimat HPP 81/38
Call For Price
2001 Holzma Optimat HPP 81/38
Aerovent
Call For Price
Aerovent
PREMIUM LISTINGS
2015 Guangzhou Hessan PUR Automatic Floor Laminating Line  Glue Equipment
$75,000

Guangzhou Hessan Woodworking Machinery Co., Ltd, HY-F-350 PUR Automatic Floor Laminating Line, 480 Volts 60Hz 3-Phase Lamination width: upto 350mm Thickness: 3-25mm Speed: 3-10m/min Dimensions: 6.8' High x 5' Wide x 72' Long Machine can laminate up to 17' long

 Hammond, IN
Brenco LLC
312-543-6505
Call

MZ Project Hopper 013  Bandsaw
$9,800

Cuts lengths up to 2,000 mm, max. size workpiece is 2,000 x 1,200 x 100 mm (78.7" x 47.2" x 4"); height of cut is from 0 - 100 mm (0" - 4") - Call for more details and similar equipment

 Jasper, IN
Machine Solutions, LLC
812-639-3527
Call

1985 Weinig U22A  Moulder
$7,500

1985 Weinig U22A Moulder, All Electrical, Just Taken out of Service, Was Working Daily, Delivery Available! $7,500 obo 585-335-5879/585-329-5875

 Dansville, NY
Dansville Logging & Lumber
585-335-5879
Call

Yates A20  Planer
$5,500

Yates A20 8” x 12” Planer, 6 head, motors needed and TLC needed for rebuild or used as parts machine, $5,500 – 719-843-0280

 Antonido, CO
Quality Timbers & Wood Products
719-843-0280
Call

Yates-American A20  Planer
$10,000

Yates A20 8” x 12” Planer, 5 head w/ top bracket, running condition, $10,000 - 719-843-0280

 Antonido, CO
Quality Timbers & Wood Products
719-843-0280
Call

STANDARD LISTINGS
1969 Capital 125"  Veneer Equipment
$138,500

CAPITAL Half-Round Slicer with a 125 inch length capacity and the following additional features: -- 50 HP Drive. -- Removed from service and Checked. -- Includes loading onto Buyer's truck.

Bill Christoffersen
800-374-5009 ext:365
Call

Capital 165"  Veneer Equipment
$149,500

CAPITAL Slicer with a 165 inch length capacity and the following additional features: -- 50 HP Main Drive. -- Still in-place connected to power for test operation but cannot be seen running a log. -- Includes loading onto Buyer's truck.

Bill Christoffersen
800-374-5009 ext:365
Call

Capital 213"  Veneer Equipment
$149,500

CAPITAL Slicer with a 213 inch length capacity and the following additional features: -- 50 HP Main Drive. -- Still in-place connected to power for test operation but cannot be seen running a log. -- Includes loading onto Buyer's truck.

Bill Christoffersen
800-374-5009 ext:365
Call

Capital VBD-36  Veneer Equipment
Call for Price

CAPITAL 36" Veneer Clipper. --36" Length of cut capacity, double-rod mechanical clutch driven by 3 HP motor, foot pedal actuation of cycle. -- Speed: About 90 cycles per minute max., shear cut angle with scissor-like angle mounted knife, motor mounted inside frame & V-belted to flywheel. --Includes: Re-sharpened knife, standard integral infeed support table and double rod guards.

Tony Cornacchione
800-374-5009 ext:432
Call

Capital VDB-100  Veneer Equipment
Call for Price

CAPITAL 125" Veneer Clipper. --125" Cap., straight knife cut for end grain clipping; 3 HP motor. -- Two-hand safety controls; Max. (90) cycles/Min. -- Complete with safety guards. -- Completely reconditioned; with new knife and shear plate.

Tony Cornacchione
800-374-5009 ext:432
Call

1967 Cargate D-860  Veneer Equipment
Call for Price

CARGATE D-860 Rotary Veneer Lathe, Heavy Duty: -- Built specifically to handle large diameter logs as well as small logs. It has a log length capacity of an easy 8'-6" and a diameter capacity of up to 5', peeling down to perfect 4" cores for optimal log utilization. -- This moneymaker looks like a big brother to a Premier Lathe. It comes complete with beefy Bull Gears and boasts plenty of output capacity along with the following main features and components:Specifications: -- BRUNETTE MACHINE WORKS Hydraulic Retractable Spindles - 4" inner, 8" and 11" outer. These are the same spindles as are utilized on a Premier Lathe. -- The spindles are driven by angle-cut 72" diameter Oil-Bath Bull Gears. (This is actually identical to an upgrade to Premier lathes still running.) -- Factory Hydraulic Backup Roll. (This backup roll rides on adjustable rollers riding down on top of the carriage. This prevents backup roll from pushing excessively hard against the core. It produces perfect 4" cores).Equipped with: -- DURAND Charger and Pumps (self centering). -- Factory Log Deck - Complete with S-drive and Gearbox. -- Factory Air Trash Gate, Infeed Conveyor (infeed to chipper). Infeed to PRENTICE Air Bag Clipper, Timing Wheel and Holddowns. -- Factory 5' Wheel, 6-knife, Veneer Chipper with Hold-down Drum Roller, and S-drive complete. -- 6' FERANO Chip Screen and Conveyor. -- 10' COE Knife Grinder. -- Steel Framework and 450 FPM plus uniwind speed!Highlights & Background: -- This lathe is capable of peeling very high production. In 1967 it was actually regularly peeling 225,000 sq. ft. 3/8 basis, or 400 - 500 cubic meters per 8-hour shift. The lathe is in wonderful overall condition and portions can be turned on today although it has not seen service since 2005. When you think "CARGATE" think "big PREMIER" and you will have the right idea.Price shown is in US Dollars. - Experienced Owner is flexible to assist in removal and perhaps installation.

Bill Christoffersen
800-374-5009 ext:365
Call

2001 Casadei LIBRA 6 TCCTT-135  Sander
$21,500

CASADIE LIBRA 6-TCCTT-135 Wide Belt Sander (4) Heads53" Width cap. Combination Head, Platen, Platen, Platen.Head Configuration:1st Head: Combination head, 7" dia. Rubber covered drum and 2" wide air segmented computer controlled polishing platen, all segments are timed with sensors to conform the platen to the shape of the panel to eliminate sand throughs on veneers, 15 HP motor 2nd, 3rd, & 4th Head: Air segmented computer controlled polishing platen, all segments are timed with sensors to conform the platen to the shape of the panel to eliminate sand throughs on veneers, 2, 3, and 4th motor 15 HPSpecifications: --Working Width 1350 mm --Working height with fixed table (constant pass line ) 160 mm --Minimum working height 3 mm --Overall sanding belt length 2620 mm --Feed motor 0.8 HP --Conveyor belt speed, 4.9 to 9 m/min --Operating pressure 6 BarEquipped with and Features: --Belts with electronic tracking and pneumatic tension --Automatic part thickness setup, motorized part thickness adjustment with LED readout 0" to 6" opening --Infeed & outfeed spring loaded holddown rolls. --Motor load meters, main sanding head motors with disc brakes --Emergency full width swing bar on infeed, emergency stop buttons on infeed & outfeed --14" infeed conveyor load area and Star Delta reduced voltage starters; SIEMENS electric.

Joe Retzlaff
800-374-5009 ext:348
Call

Casadei F 115  Shaper
$6,250

CASADEI Model F 115 Sliding Table Shaper with Maggi Steff Power Feeder. -- 9 HP motor, 1-1/4" dia. spindle, 7" spindle length, 8-1/2" travel up/down, (4) spindle speeds at 2,900 / 4,400 / 6,000 & 8,000 RPM. -- Equipped with: Reverse switch; adjustable fence (360ø rotatable) with (3) micro-metric fine adjustmentss; sliding table 43" x 28" in size. -- Complete with: Maggi Steff 2048 Power Feeder.

 WEST COAST, AL
EX-FACTORY INC.
704-841-2001
Call

2001 Casadei F 115  Shaper
$3,475

CASADEI F 115 Spindle Shaper; Single Spindle Shaper with 11 HP Motor, 1-1/2" dia. spindle. -- (5) Spindle Speed 2,900 - 4,400 - 6,000 - 8,000 &10,000 RPM. 7" Under nut, adjustable spindle height of 8-1/2". -- Features hand wheel for micrometric adjustments, fence to both sides of cutter head with micro adjustments, -- 43.3" x 29-1/2" Polished steel table with 13" cutter head opening. Complete with: -- Automatic spindle brake, spindle locking, motor reversing switch. -- Shaving hood, shaper fence guard; magnetic starter. -- Power Feeder available for additional charge.

Torry Hiddema
800-374-5009 ext:371
Call

1995 Casadei F 114  Shaper
$3,350

CASADEI F-114 Shaper with 5 HP Spindle motor. -- 1-1/4" dia. spindle, 7" spindle length, 8-1/2" vertical travel, manual raise/lower of spindle, numerical readout display for spindle setting. -- (4) speeds at 2,900 - 4,400 - 6,000 & 8,000 RPM, electro-magnetic spindle brake. -- 43" x 28" table size, adjustable fence (360ø rotatable) with (3) micro-metric fine adjustments. -- Complete with: Overload protection and electric spindle lock.

Torry Hiddema
800-374-5009 ext:371
Call

1994 Casadei F 114  Shaper
$3,950

CASADEI F-114 Shaper with 5 HP Spindle motor and Power Feeder. -- 1-1/4" dia. spindle, 7" spindle length, 8-1/2" vertical travel, manual raise/lower of spindle, numerical readout display for spindle setting. -- (4) speeds at 2,900 - 4,400 - 6,000 & 8,000 RPM, electro-magnetic spindle brake. -- 43" x 28" table size, adjustable fence (360ø rotatable) with (3) micro-metric fine adjustments. -- Complete with: Overload protection, electric spindle lock, and Power Feeder

Torry Hiddema
800-374-5009 ext:371
Call

Casadei F 114  Shaper
$4,950

CASADEI F-114 Shaper with 8 HP Spindle motor and MAGGI Power Feeder. -- 1-1/4" dia. spindle, 7" spindle length, 8-1/2" vertical travel, manual raise/lower of spindle. -- (4) speeds at 2,900 - 4,400 - 6,000 & 8,000 RPM, electro-magnetic spindle brake. -- 43" x 28" table size, adjustable fence with micro-metric fine adjustments. -- Complete with: Overload protection, electric spindle lock, and MAGGI 4-Roll Power Feeder.

Torry Hiddema
800-374-5009 ext:371
Call

1994 Casadei F/115C  Shaper
Call for Price

Spindle Diameter: 1-1/4" Spindle Height: 7.87" Table: 98.43" x 35.43" 8.25 kW Motor

Carolina Machinery Sales, Inc
704-288-1904
Call

1999 Casadei F 114  Shaper
$2,850

CASADEI F-114 Shaper with 8 HP Spindle motor -- 1-1/4" dia. spindle, 7" spindle length, 8-1/2" vertical travel, manual raise/lower of spindle, numerical readout display for spindle setting. -- (4) speeds at 2,900 - 4,400 - 6,000 & 8,000 RPM, electro-magnetic spindle brake. -- 43" x 28" table size, adjustable fence (360ø rotatable) with (3) micro-metric fine adjustments. -- Complete with: Overload protection, electric spindle lock.

Torry Hiddema
800-374-5009 ext:371
Call

2002 Casadei LINEA MX  Panel Saw
$12,900

CASADEI LINEA/MX Front Load Panel SawFront Load Panel Saw w/Tilting Arbor;...perfect for a cabinet shop!Specifications: -- 153.5" (3,900 mm) Length of cut, 102" (2,600 mm) pull back, 2.5" (65 mm) cutting height @ 90°. -- 7.5 HP Main saw motor, 12" (300 mm) dia main blade (4,600 RPM) & 5" (125 mm) dia scoring blade (9,200 RPM), both main & scoring blade are driven by the same motor. -- Saw carriage travel speed 12 - 115 FPM (4 - 35 MPM), return 115 FPM (35 MPM); length of saw stroke by selector switch. -- Programmable Pusher with rack & pinion drive on both sides, feed speed 2 - 46 FPM (0.6 - 14 MPM) forward, 46 FPM (14 MPM) return; -- (5) Material grippers, manually positioned side aligner, safety finger flaps.Complete with: -- Windows XP Computer; (2) front air floatation tables, front safety guard. -- Includes: 240/600 Volt Transformer; Also available separately: 2016 Nederman Dust Collector (see DC-012026).

Jim Reedy
800-374-5009 ext:455
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved