Clamp Carrier For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 3
43 Results Found
Sort By 
STANDARD LISTINGS
Billstrom 16 FT  Clamp Carrier
$9,500

Billstrom 16’6” Clamp Carrier w/17 Sections, A Taylor Pneumatic Drive Motor turns the Carrier, Pneumatic Flattening Bar & 100’s of Extra Clamps, Can Assist on Loading out, A Good Small 16’ Clamp Carrier at a Low Price! $9,500 Call Jerry 814-882-2695

 Waterford, PA
Summit Hardwoods, Inc.
814-882-2695
Call

2019 Cam-Wood 8 SECTION 125"  Clamp Carrier
$16,990

CAM-WOOD CC-4108PA Clamp Carrier (8 Sections)8-Section Pneumatic Clamp Carrier with 125" width capacity.Equipped with: -- (8) Heavy Duty zinc plated clamps per section (64 clamps total). -- 40" Opening on clamps. -- Jaw sizes of clamps are 3-1/2" with inward draft. -- Pneumatic overhead panel flattener. -- Pneumatic clamp tightener and 1/2 HP electric motor rotation.Standard features: -- Large I-beam frame & legs for max. rigidity and durability. -- Heavy-duty zinc-plated clamp with huge 3/4" diameter jack bolt for super strength. -- Powerful caterpillar chain drive for clamp rotation. -- Select switch control for auto or manual mode.Includes: -- (2) Clamp tighteners with pneumatic wrench for rapid tightening and loosening of clamp. -- (2) Pneumatic panel flatteners to hold panels flat while clamps are tightened.Versatile and reliable Edge Gluing Machine for Solid Wood gluing, including laminate board, parquet, flat stock, table top, core block, truck flooring, turnings, chair seat, legs, spindle blanks, stair tread, and many others.

Louis Sicotte
800-374-5009 ext:329
Call

2019 Cam-Wood 8 SECTION 98"  Clamp Carrier
$15,950

CAM-WOOD CC-388PA Clamp Carrier (8 Sections)8-Section Pneumatic Clamp Carrier with 98" width capacity.Equipped with: -- (6) Heavy Duty zinc plated clamps per section (48 clamps total). -- 40" Opening on clamps. -- Jaw sizes of clamps are 3-1/2" with inward draft. -- Pneumatic overhead panel flattener. -- Pneumatic clamp tightener and 1/2 HP electric motor rotation.Standard features: -- Large I-beam frame & legs for max. rigidity and durability. -- Heavy-duty zinc-plated clamp with huge 3/4" diameter jack bolt for super strength. -- Powerful caterpillar chain drive for clamp rotation. -- Select switch control for auto or manual mode.Includes: -- Clamp tightener with pneumatic wrench for rapid tightening and loosening of clamp. -- Pneumatic panel flattener to hold panels flat while clamps are tightened.Versatile and reliable Edge Gluing Machine for Solid Wood gluing, including laminate board, parquet, flat stock, table top, core block, truck flooring, turnings, chair seat, legs, spindle blanks, stair tread, and many others.

Louis Sicotte
800-374-5009 ext:329
Call

2002 Cameron Automation OPTI-MATCH  Clamp Carrier
$22,900

CAMERON AUTOMATION 35A OPTI-MATCH Color Matching-Panel Sizing- Optimization SystemFeatures: &#9679 Accurately measure board width and color from parallel ripped defected stock. &#9679 Scan an area 5" in from the end of each board as it traverses across grain. &#9679 Choose from 22 boards at a time to find boards that are close in color to make a specified size panel. &#9679 Assemble the chosen boards in the proper order to blend the boards in each panel. &#9679 Automatically stack the assembled panels on a scissors lift, ready for gluing. &#9679 Keep accurate tallies of panels and board pieces. &#9679 Allow entering of multiple panel widths. &#9679 Smart stack multiple panel widths.Machine Dimensions:: &#9679 Overall Height: 54" (1372 mm) &#9679 Overall Width: 66" (1676 mm) &#9679 Overall Length: 24' (7.38 Meters)Specifi cations: &#9679 Minimum Board Length: 10” (254 mm) &#9679 Maximum Board Length: 66” (1676 mm) &#9679 Maximum Board Width: 6” (152 mm) &#9679 Minimum Board Width: 1” (25.4 mm) &#9679 Maximum Thickness: 8/4” (51 mm) &#9679 Maximum Panel Width: 36” (914 mm)Actual model is 35A-48W-22L-220-R

Louis Sicotte
800-374-5009 ext:329
Call

2000 Doucet SRR-20-10.5-160-32-R  Clamp Carrier
$25,000

DOUCET 20-Section Automatic Clamp Carrier; --(20) Sections; 10.5' wide usable clamping width -- (8) Clamps per section (total of 160 clamps). -- 32" Opening clamps, 3-1/2" high x 5" jaw width. Complete with: -- Automatic thithening and un-tigthening -- Pneumatic panel flattener, -- Heavy-Duty, -- 5 HP hydraulic pump for rotation drive, -- Hydraulic torque wrench clamp tightener;

Louis Sicotte
800-374-5009 ext:329
Call

Doucet 60 SECTION  Clamp Carrier
$33,000

DOUCET 60-Section Clamp Carrier(60) Sections; 10.5' wide usable clamping width. -- (10) Clamps per section (total of 590 clamps).with quick attach system -- 32" Opening clamps, 3-1/2" high x 4" jaw width.Complete with: -- (2) Pneumatic panel flatteners, -- Heavy-Duty, 5 HP hydraulic pump for rotation drive, -- (2) Hydraulic torque wrench clamp tighteners; -- (1) Automatic Hydraulic un-tightener located on top of the clamp carrierNote: Already tear down and ready to ship - Priced in CDN-$'s, approx. 25% less in US-$'s.

Louis Sicotte
800-374-5009 ext:329
Call

1998 Doucet 40 SECTION-A  Clamp Carrier
$11,900

DOUCET 40 Section Automatic Clamp Carrier -- 40-Section, 8-1/2' capacity. -- (6) Clamps per section, total of (240) clamps, 36" Opening, 2-1/2" high jaws. Equipped with: -- (2) Pneumatic panel flatteners, -- Hydraulic rotation -- Hydraulic clamp tightener via PLC controled automatic operator.Actual Model: SRR-40-8.5-240-36Note: Tear down not included in price

Louis Sicotte
800-374-5009 ext:329
Call

2019 JLT 79F-16-PC  Clamp Carrier
$9,325

JLT 79F-16-PC Multi Level Panel Clamp16' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (3) Levels for mounting clamps; -- (36) clamps total manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps # 302-40-H-R with 40" opening with a 3-1/2" high x 4" wide jaw. -- (72) # 80-1706 Rocker adaptor plates for up to 6" thick glue stock -- (1) Fastener and shim kit for precise clamp alignment -- Glue spreader 180AFloor space requirement: 16' x 52"W x 70" high

Louis Sicotte
800-374-5009 ext:329
Call

2019 JLT 79F-12-PC  Clamp Carrier
$6,100

JLT 79F-12-PC Multi Level Panel Clamp12' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (6) clamps per level (a total of 30) manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw.Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,125 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 850 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$1,790Floor space requirement: 144" x 78" x 52" high

Louis Sicotte
800-374-5009 ext:329
Call

JM Lancaster 1100E  Clamp Carrier
Call for Price

80" x 100" Capacity Crank Wheel for adjustment Everything works

Carolina Machinery Sales, Inc
704-288-1904
Call

2011 Quick 06 SECTION STANDARD  Clamp Carrier
$19,900

Quick 6-Section Pneumatic Heavy Duty Pneumatic Clamp Carrier with 16.5' Width Capacity -- 6-Section Pneumatic Clamp Carrier with 16-1/2' width cap. -- (15) Heavy Duty zinc plated clamps per section (90 clamps total), 32" opening on clamps. (15) Jaw size of clamps are 3-1/2" high x 4-3/4" wide, with 1° inward draft. and (75) with 6" jaw height (newly installed in February 2018) Equipped with: -- (1) Pneumatic overhead panel flattener and a 2nd panel flattener for a second operator. -- (1) Pneumatic clamp tightener . -- semi-automatic rotation via electric motor drive; separate buttons for Front Rest Out, Rotate Reverse, Rotate Forward and Front Rest In.Complete with: Flexible conduit for electric wires, automatic air line oiler, high quality urethane finish coating, and tool box with spare parts & tools.

Louis Sicotte
800-374-5009 ext:329
Call

2019 Quick 06 SECTION HEAVY DUTY-P  Clamp Carrier
$27,580

QUICK 6-Section Pneumatic Clamp Carrier with 20-1/2' width cap. & dual operator's stations, -- (15) Heavy Duty zinc plated clamps per section (90 clamps total), 50" opening on clamps. Jaw sizes of clamps are 3-1/2" high x 4-3/4" wide, with 1° inward draft. -- Equipped with DUAL OPERATOR'S STATIONS including: (2) pneumatic overhead panel flatteners, (2) pneumatic clamp tighteners and with semi-automatic rotation via electric motor drive; with separate buttons for Front Rest Out, Rotate Reverse, Rotate Forward and Front Rest In. -- Standard features: Foot levelers, coiled air lines, flexible conduit for electric wires, automatic air line oiler, high quality urethane finish coating, and tool box with spare parts & tools.

Louis Sicotte
800-374-5009 ext:329
Call

2019 Quick 20 SECTION HEAVY DUTY-H  Clamp Carrier
$44,980

QUICK 20 Section 16.5' Heavy Duty Clamp Carrier -- 20-Section Thick Stock Pneumatic Clamp Carrier; 16-1/2' width cap.; -- (12) clamps, each with 3 1/2" high jaws and 38" clamp opening for a total of (240) clamps. -- All clamps are heavy duty type; zinc plated and with 1° inward draft. --Equipped with: -- Dual operator package with (2) pneumatic overhead panel flatteners, -- (2) pneumatic clamp tighteners. -- Semi-automatic rotation via electric motor drive and separate buttons for Front Rest Out, Rotate Reverse, Rotate Forward and Front Rest In. -- Standard features: -- Heavy duty thick stock frame with 3" dia. shafts and 6" I-beam legs; foot levelers, coiled air lines, flexible conduit for electric wires, automatic air line oiler, high quality urethane finish coating, and tool box with maintenance tools.

Louis Sicotte
800-374-5009 ext:329
Call

2019 Quick 20 SECTION STANDARD-P  Clamp Carrier
$32,800

QUICK 20-Section Pneumatic Clamp Carrier with 10-1/2' width capacity -- With (8) Standard zinc plated clamps per section (160 clamps total), 50" opening on clamps.Standard Features include: -- Clamps jaws are 2-1/2" high x 4-3/4" wide with 1° inward draft to keep stock securely held down. Clamps use 3/4" dia. full-length screws; corrosion resistant, zinc plated, full box frame. For face gluing, Rocking Plates available as optional equipment -- Panel Flattener with easy to use controls. -- Pneumatic Clamp Tightener; 3,000 RPM air wrench is 5 to 10 times faster than competitive tighteners; two-handed, trigger activated tightener is more confidence inspiring than the old ergonomically awkward "swing-style" clamp tighteners. Fast tightening and full-length clamp screws eliminate need for manual adjustment of rear clamp jaws. -- Electric Motor Rotation; push button, automatic cycle with indexing. Automatic Rotation Cycle includes entire sequence; reverse rotation, front-rest out, forward rotation, front-rest in, and lay clamps on front rest. Perfectly! Every time!Complete with: Foot levelers, coiled air lines, flexible conduit for electric wires, automatic air line oiler, high quality urethane finish coating, and tool box with spare parts & tools.NOTE: A 20-Section Clamp typically produces 500 panels per shift.

Louis Sicotte
800-374-5009 ext:329
Call

2019 Quick 20 SECTION  Clamp Carrier
$29,960

QUICK 20 Section Heavy Duty Pneumatic Clamp Carrier: -- Clamp Carrier: (20) Sections with 8-1/2' width cap., (6) heavy duty zinc plated clamps per section (120 clamps total), 44" opening on clamps (other lengths available). -- Clamps jaws are 3-1/2" high x 4-3/4" wide with 1° inward draft to keep stock securely held down. Clamps use 3/4" dia. full-length screws; corrosion resistant, zinc plated, full box frame. -- For face gluing, Rocking Plates available as optional equipment. -- Equipped with: Panel Flattener with easy to use controls. -- Pneumatic Clamp Tightener; 3,000 RPM air wrench is 5 to 10 times faster than competitive tighteners; two-handed, trigger activated tightener is more confidence inspiring than the old ergonomically awkward "swing-style" clamp tighteners. Fast tightening and full-length clamp screws eliminate need for manual adjustment of rear clamp jaws. -- Electric Motor Rotation: Push button, automatic cycle with indexing. Automatic Rotation Cycle includes entire sequence; reverse rotation, front-rest out, forward rotation, front-rest in, and lay clamps on front rest. Perfectly! Every time! -- Complete with & Includes: Foot levelers, coiled air lines, flexible conduit for electric wires, automatic air line oiler, high quality urethane finish coating, and tool box with spare parts & tools.NOTE: 20 Section machine can produce up to (500) panels per shift!

Louis Sicotte
800-374-5009 ext:329
Call

2019 Quick 06 SECTION STANDARD  Clamp Carrier
$16,800

QUICK 6-SECTION, 10'-1/2' Wide Pneumatic "Standard" Clamp Carrier: 6-Section Clamp typically produces (144) high quality edge glued panels per day (3 panels per section x 6 sections x 8 hours). Equipped with: -- (6) Sections with (8) clamps per section and 10-1/2' width capacity. -- (48) Clamps with 38" opening and 2-1/2" high x 4-3/4" wide jaws with 1° inward draft. Clamps use 3/4" dia. full-length screws; corrosion resistant, zinc plated, full box frame. Rocker Plates available as optional equipment for face gluing. Features: -- Semi-automatic electric motor drive. -- Pneumatic Panel Flattener for 10-1/2' wide Carrier with easy to use controls. -- Pneumatic Clamp Tightener with 3,000 RPM air wrench is (5 -10) times faster than competitive tighteners; 2-handed, trigger activated tightener is more confidence inspiring than the older, ergonomically awkward "swing-style" clamp tighteners. -- Fast tightening and full-length clamp screws eliminate need for manual adjustment of rear clamp jaws. Complete with: -- Foot levelers, coiled air lines, flexible conduit for electric wires, automatic air line oiler, high quality Urethane finish coating, and tool box with spare parts & tools. -- NOTE: Clamp Carrier can be expanded to (14) or (20) sections at a later time. 14-Section Clamp will produce (300) panels per shift; 20-Section machine, (500) panels per shift.

Louis Sicotte
800-374-5009 ext:329
Call

2019 Quick 20-SECTION AUTOMATIC  Clamp Carrier
$38,850

QUICK 20 Section Automatic Clamp Carrier: -- Clamp Carrier: (20) Sections with 8-1/2' width cap., (6) heavy duty zinc plated clamps per section (120 clamps total), 32" opening on clamps (other lengths available). -- Clamps jaws are 3-1/2" high x 4-3/4" wide with 1° inward draft to keep stock securely held down. Clamps use 3/4" dia. full-length screws; corrosion resistant, zinc plated, full box frame. -- For face gluing, Rocking Plates available as optional equipment. -- Equipped with: -- Fully Automatic Hydraulic Clamp Tightener with adjustable torque limiter, integral Pneumatic Panel Flatteners and Electric Motor Drive with fully Automatic Carrier Rotation Cycle. Two control panels maximize ease-of use. Rack and pinion carriage traverse system is solid and quietFeatures: -- The QUICK Automatic Clamp Carrier is the ideal labor-saving device for the high-production furniture or cabinet manufacturer. The Automatic Clamp Carrier cuts labor costs in half by allowing the Clamp Carrier operator to perform other tasks (such as applying glue to stock, etc.) while the machine automatically flattens panels, tightens clamps, rotates, and loosens clamps. -- After loading wood into a section of clamps, the operator presses the "Auto Tighten" button. The hydraulic Automatic Carriage then traverses from left to right, flattening panels and tightening clamps that it finds along the way. When the Carriage reaches the right end of its traverse, the machine performs an automatic rotation cycle, which brings the next section of clamps down to the operator’s position. The Carriage then traverses from right to left, loosening clamps that it finds along the way. -- The Fully Automatic Clamp Carrier can also be used in manual or semi-automatic modes, by pressing buttons on the Control Panels. -- Complete with & Includes: -- Foot levelers, coiled air lines, flexible conduit for electric wires, automatic air line oiler, high quality urethane finish coating, and tool box with spare parts & tools.NOTE: 20 Section machine can produce up to (500) panels per shift!

Louis Sicotte
800-374-5009 ext:329
Call

2019 Quick 14 SECTION STANDARD DUTY-P  Clamp Carrier
$25,965

QUICK 14-Section Pneumatic Clamp Carrier with 10-1/2' width capacity With (8) Standard zinc plated clamps per section (112) clamps total), 38" opening on clamps Standard Features include: Clamps jaws are 3-1/2" high x 4-3/4" wide with 1° inward draft to keep stock securely held down. Clamps use 3/4" dia. full-length screws; corrosion resistant, zinc plated, full box frame. For face gluing, Rocking Plates available as optional equipment Panel Flattener with easy to use controls.Pneumatic Clamp Tightener; 3,000 RPM air wrench is 5 to 10 times faster than competitive tighteners; two-handed, trigger activated tightener is more confidence inspiring than the old ergonomically awkward "swing-style" clamp tighteners. Fast tightening and full-length clamp screws eliminate need for manual adjustment of rear clamp jaws. Electric Motor Rotation; push button, automatic cycle with indexing. Automatic Rotation Cycle includes entire sequence; reverse rotation, front-rest out, forward rotation, front-rest in, and lay clamps on front rest. Perfectly! Every time! Complete with:Foot levelers, coiled air lines, flexible conduit for electric wires, automatic air line oiler, high quality urethane finish coating, and tool box with spare parts & tools. 14-Section Clamp will produce 300 panels

Louis Sicotte
800-374-5009 ext:329
Call

2019 Quick 14 SECTION STANDARD DUTY-P  Clamp Carrier
$50,370

QUICK 14-Section Pneumatic Clamp Carrier with 16-1/2' width capacity and Glue applicatorWith (15) Standard zinc plated clamps per section (210 clamps total), 38" opening on clamps Standard Features include: Clamps jaws are 3-1/2" high x 4-3/4" wide with 1° inward draft to keep stock securely held down. Clamps use 3/4" dia. full-length screws; corrosion resistant, zinc plated, full box frame. For face gluing, Rocking Plates available as optional equipment (2) Panel Flattener with easy to use controls.(2) Pneumatic Clamp Tightener; 3,000 RPM air wrench is 5 to 10 times faster than competitive tighteners; two-handed, trigger activated tightener is more confidence inspiring than the old ergonomically awkward "swing-style" clamp tighteners. Fast tightening and full-length clamp screws eliminate need for manual adjustment of rear clamp jaws. Electric Motor Rotation; push button, automatic cycle with indexing. Automatic Rotation Cycle includes entire sequence; reverse rotation, front-rest out, forward rotation, front-rest in, and lay clamps on front rest. Perfectly! Every time! Complete with:Foot levelers, coiled air lines, flexible conduit for electric wires, automatic air line oiler, high quality urethane finish coating, and tool box with spare parts & tools.14-Section Clamp will produce 300 panels Glue applicator roller 20" wide with 11' infeed and 17' outfeed conveyor, Hold down roller over the glue roller

Louis Sicotte
800-374-5009 ext:329
Call

2019 Quick 40 SECTION AUTOMATIC  Clamp Carrier
$62,100

QUICK 40 Section Automatic Clamp Carrier: -- Clamp Carrier: (40) Sections with 8-1/2' width cap., (6) heavy duty zinc plated clamps per section (240 clamps total), 40" opening on clamps with quick adjustment (other lengths available). -- Clamps jaws are 3-1/2" high x 4-3/4" wide with 1° inward draft to keep stock securely held down. Clamps use 3/4" dia. full-length screws; corrosion resistant, zinc plated, full box frame. -- For face gluing, Rocking Plates available as optional equipment. -- Equipped with: -- Fully Automatic Hydraulic Clamp Tightener with adjustable torque limiter, integral Hydraulic Panel Flatteners and Electric Motor Drive with fully Automatic Carrier Rotation Cycle. Two control panels maximize ease-of use. Rack and pinion carriage traverse system is solid and quietFeatures: -- The QUICK Automatic Clamp Carrier is the ideal labor-saving device for the high-production furniture or cabinet manufacturer. The Automatic Clamp Carrier cuts labor costs in half by allowing the Clamp Carrier operator to perform other tasks (such as applying glue to stock, etc.) while the machine automatically flattens panels, tightens clamps, rotates, and loosens clamps. -- After loading wood into a section of clamps, the operator presses the "Auto Tighten" button. The hydraulic Automatic Carriage then traverses from left to right, flattening panels and tightening clamps that it finds along the way. When the Carriage reaches the right end of its traverse, the machine performs an automatic rotation cycle, which brings the next section of clamps down to the operator’s position. The Carriage then traverses from right to left, loosening clamps that it finds along the way. -- The Fully Automatic Clamp Carrier can also be used in manual or semi-automatic modes, by pressing buttons on the Control Panels. -- Complete with & Includes: -- Foot levelers, coiled air lines, flexible conduit for electric wires, automatic air line oiler, high quality urethane finish coating, and tool box with spare parts & tools.

Louis Sicotte
800-374-5009 ext:329
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved