Chop Saws For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 2
34 Results Found
Sort By 
STANDARD LISTINGS
Bailey Machine WEDGE SAW  Chop Saw
Call for Price

BAILEY MACHINE CO WEDGE SAW 26" BLADE W/30HP MTR & 3'X 5' TABLE

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Baker  Chop Saw
$7,000

Line shaft ready, infeed-outfeed, air stops, all air controls, excellent condition.

 Middlebury, IN
Showcase Equipment
260-250-4645
Call

Baker Complete Cut-Up Line  Chop Saw

Baker Cutup Line – 4 Saws, with infeed deck outfeed rolls and controls. Excellent shape. Can be seen running.

 Farmington, IL
Sawmill Hydraulics, Inc.
309-245-2448
Call

Baker DOUBLE SELECT  Chop Saw
$15,000

Double select, electric drive, includes all controls, very good condition.

 Middlebury, IN
Showcase Equipment
260-250-4645
Call

Brewer 1685  Chop Saw

Brewer 1685 Chop Saw w/Infeed, Outfeed, Waste Conveyor, Cab, Controls.

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Brewer  Chop Saw

Cutoff Saw

Pallet Machinery Group
540-644-9220
Call

Cornell Swing  Chop Saw

Cornell Cut Off Saw with out feed and West Plains Infeed Belt.

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Cornell HT0  Chop Saw
$3,500

MLS Number 10123965 Cornell HT0 Chop Saw Includes hydraulic unit

Mike Stuck
828-773-2204
Call

CTD Machines A480E Cut off Saw  Chop Saw
Call for Price

CTD Model A480E Cut Off Saw

Carolina Machinery Sales, Inc
704-288-1904
Call

Call for Price

Delta  Chop Saw
Call for Price

Delta Radial Arm Saw

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

2015 Dimter Opticut S90 Speed  Chop Saw
Call for Price

Grecon Dimter Opticut S90 Speed Optimizing Crosscut Saw Manufacturer specs (to be confirmed) 14-1/2' Infeed 33' Outfeed with (6) Kickers. Material capacities 4" Thick x 9" wide max.; 3/4" x 1" minimim.; 16" Min. to 13' max. infeed board lengths. 10 HP Arbor motor driving 20-1/2" dia. blade with 30 mm bore at 2,900 RPM. Infeed system 295 FPM max., travels full length of board, reading crayon marks for cut to length, optimization & defecting marks. Marking Station Attached to the transport section; easily accepts incoming lengths up to 13'.

Carolina Machinery Sales, Inc
704-288-1904
Call

Hazeldine  Chop Saw
$4,500

Chop Saw. This machine is a Hazeldine upright chop saw. Item #00708

 Sturgeon Lake, MN
L & L Sales
218-372-4232
Call

Hurricane 20in  Chop Saw
Call for Price

20" Chop Saw with Air stops. Cuts 6"x8" #C840

 Sturgeon Lake, MN
L & L Sales
218-372-4232
Call

Mellott 140  Chop Saw

Mellott Scrap chopper S/N 140091 Hydraulic Shear

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Morgan  Chop Saw
$6,000

Hydraulic powered blade, air stops, infeed-outfeed, working condition.

 Middlebury, IN
Showcase Equipment
260-250-4645
Call

Morgan Tie Cut  Chop Saw

Morgan Manual Chop Saw Set Up to Cut Rail Ties

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

Northfield X36CH  Chop Saw

Northfield X36CH Unipoint Hydraulic Cut Off Saw

LPS Equipment & Acquisition Co.
731-986-4351
Call

2002 OMGA TI 2500 Super US  Chop Saw
Call for Price

There are (2) saws available. OMGA TI 2500 Super US Double Cut Off Saw

Carolina Machinery Sales, Inc
704-288-1904
Call

Pertici 402IP Double Head Cut Off Saw  Chop Saw
Call for Price

Pertici 402IP Double Head Cut Off Saw - 400mm blades - Can be supplied in 3.5 meter or 5 meter cutting length. - The 402IP has the left carriage fixed and the right carriage is manually positioned along the rail. The measure positioning is read on a metric ruler. - The bed can be manually rotated at 45°. The heads tilt externally for cutting between 0° and 45°. - The 403IP has the left carriage fixed and the right carriage is automatically positioned along the rail. The measure positioning is read on a magnetic ruler. The 403IP is equipped with an electronic programmable control unit.

Carolina Machinery Sales, Inc
704-288-1904
Call

Pertici 40MP Single Head Saw  Chop Saw
Call for Price

Pertici 40MP Single Head Saw - Blade size: 400 mm - Manual feeding of the head - Manual rotation of the plan for cuts at 45 degrees and intermediate angles on vertical axis - Manual tilting of the head for cuts from 0-45 degrees - Cast iron table - Lubrication system - Pair of horizontal pneumatic clamps - Main Motor: 2.2 kW - Blade Speed: 3200 RPM -

Carolina Machinery Sales, Inc
704-288-1904
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved