Woodworking Equipment For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 1 of 70
1393 Results Found
Sort By 
Recently Added Items
1997 Heesemann LSM 8
$36,500
1997 Heesemann LSM 8
2004 Viet S1 323
$21,750
2004 Viet S1 323
2019 Extrema ESO-108.3
$2,399
2019 Extrema ESO-108.3
2019 Extrema ESO-108.1
$2,399
2019 Extrema ESO-108.1
PREMIUM LISTINGS

Call for Price

Costa Window-Line  Moulder
Call for Price

A. Costa Window Line - Dismantled Moulder Tenoner Line. This is a heavy duty production machine built for producing high end windows and doors. Last in operation Nov. 2017 in NY. Now in storage at Port San Antonio.

 San Antonio, TX
512-261-3838
Call

STANDARD LISTINGS
2019 EMC VENUS 1300 1K  Sander
$24,250

EMC VENUS 1300 SUPER 1K Finishing Sander with (1) Sanding Head: Combination Head.Useful working width 1,300 mm (51"). Working thickness min/max mm 3 - 170 (1/8" - 6-5/8").SUPER indicates longer belt length of 2,620 mm (103").Working Unit: Combination Roller & Pad. -- Roller diameter 142 mm (5-5/8"). Rubber covered hardness 45 Shore. Roller pressure adjustment control. Main Motor On Off Selector control with pneumatic piston to select roller, 22 kW (30 HP) Automatic star-delta starter Rotating cutting speed: 18 m/Sec (59 FPS). -- PNEUMATIC Flexible Sanding Pad Including On-Off Selector: Quick Change System: Removable pad with felt, rubber and graphite. Rotating cutting speed 17 m/Sec (55.8 FPS). Abrasive belts oscillation by means of electronic photocell sensor.Feed system:MOBILE WORK TABLEIdle table rollers support in infeed and outfeedRubber covered presser rollers, groovedVariable feed belt speed, adjustable from 3 to 19 m/Min (9.8 - 62 FPM). Inverter ControlledLarge diameter screws on machined guides with columns and pistonsAutomatic feed belt centering deviceGeneral Machine Features: -- Independent main motors. -- Analog ammeters, for each motor, on main control cabinet. -- Electronic motorized grit set system, control from touch screen for each working group.Electronical Panel: -- Check Control Self Diagnostics with Alarm Control. -- Analog Ammeters, for each motor, on the main control cabinet. -- Electronic raising and lowering of the table, thickness system, electronically controlled. -- Independent Overload protection.Safety: -- Infeed front emergency swinging bar for oversized panels. -- Infeed protection pressing blade to avoid pieces to go back to operator. -- Rear and front emergency push buttons. -- Automatic brake on abrasive belts motors. -- Automatic emergency stop and alarm display in case of: -- Low Air Pressure. -- Doors opened ("easy maintenance and inspection"). -- Electric motors overloading. Emergency detector for over thickness material cut. -- No tension on abrasive belt. -- Abrasive belt lateral mistracking. -- Abrasive belt broken.Idle table rollers support in infeed and outfeedSelector Switches on both working units.Centralized Control Cabinet: IP 54 protection. Analog ammeter on main control cabinet. Table lifting-lowering thickness system electrically controlled. AUTOMATIC Delta - Star starter on abrasive belts motors. Centralized independent pneumatic control cabinet: IP 54 protection. Pneumatic air filter with automatic water-drain system. Pneumatic adjustment for "Grit set system". Pneumatic plant working without lubrication. Compressed air pressure 6 bar (85 PSI). Options Available: Tampico Brush natural fiber brush for cleaning of the pieces, diameter 150 mm (6"). Motor Power 1.1 kW (1.5 HP). $3,950

Ed Webb
800-374-5009 ext:377
Call

2019 EMC WOODY 1100 1K  Sander
$41,750

EMC Woody 1100 1K Calibrating & Finishing Sander with One Combination Head, Roller and Pad, with vacuum conveyor system.TECHNICAL DATA: -- Useful working width 1,100 mm (43"). -- Working thickness min/max mm 3 - 190 (1/8" - 7-1/2"). -- Abrasive belt dimensions, (length) 1,900 mm (75") x (width) 1,120 mm (44"). -- Feed belt speeds m/Min adjustable by INVERTER from 2.5 to 12 m/Min (8.2 - 39.3 FPM). -- 11 kW (15 HP) Main Motor.Working Unit: Combination Roller & Pad. -- Contact Roller diameter 125 mm (5"). Rubber covered hardness 85 Shore. Roller pressure adjustment control and "Grit-Set system", electronic motorized grit compensation. Including On-Off Selector. -- Electronic segmented Sanding Pad type "CP" with 20 segments, each 55 mm wide (2-3/16"). Including On-Off Selector. Quick Change System: Removable pad with felt, rubber and graphite. Rotating cutting speed 17 m/Sec (55.8 FPS). Abrasive belts oscillation by means of electronic photocell sensor. -- Oscillating blower for abrasive belt cleaning.Feed system: -- Motorized table lifting including fine adjustment, on (4) precision screws. -- Vacuum conveyor bed assembly. -- Natural rubber conveyor belt, machined. -- Feed belt centering by means of conical rollers. -- Electronic digital display for working thickness; resolution 0.1 mm (0.004"). -- Idle table rollers support in infeed and outfeed.Centralized Control Cabinet: 4.7" Colour Touch Screen Control & Display. Storage of 100 sanding programs. Command, programming and display for all electronic sanding pad functions. IP 54 protection. Analog ammeter on main control cabinet. Table lifting-lowering thickness system electrically controlled. AUTOMATIC Delta - Star starter on abrasive belts motors. Centralized independent pneumatic control cabinet: IP 54 protection. Pneumatic air filter with automatic water-drain system. Pneumatic adjustment for "Grit set system". Pneumatic plant working without lubrication. Compressed air pressure 6 bar (85 PSI). Features: Control panel with self-diagnostics alarm control unit, Rubber covered presser rollers, grooved

Ed Webb
800-374-5009 ext:377
Call

2019 Exaktor EX26X  Table Saw
$960

Easy to adapt to any tablesaw. -- Quick release feature allows for removal and attachment to other machines. -- Other uses include Shapers, Routers and Bandsaws. -- Telescoping crosscut fence extends to 96" and includes (2) repeat stops. -- Quickly miter the crosscut fence up to a 45° angle and then return it to a precise 90° setting. -- Options available include the "EXORA" Outboard Roller Assembly, "ST03-A" Extra Quick Release Back Plate for 2nd Machine, "EXDB" Diagonal Braces for use with a Mobile Base.

 EASTERN CDN, AL
EX-FACTORY INC.
704-841-2001
Call

2019 Exaktor EX40  Table Saw
$1,030

Easy to adapt to any tablesaw. -- Quick release feature allows for removal and attachment to other machines. -- Other uses include Shapers, Routers and Bandsaws. -- Telescoping crosscut fence extends to 96" and includes (2) repeat stops. -- Quickly miter the crosscut fence up to a 45° angle and then return it to a precise 90° setting. -- Options available include the "EXORA" Outboard Roller Assembly, "ST03-A" Extra Quick Release Back Plate for 2nd Machine, "EXDB" Diagonal Braces for use with a Mobile Base.

 EASTERN CDN, AL
EX-FACTORY INC.
704-841-2001
Call

2019 Extrema ET-100  Shaper
$1,799

EXTREMA ET-100 Fixed Spindle Shaper; "Extremely" well-built and with solid features. -- Single phase with 3 HP or 3-phase with 5 HP motor. -- Interchangeable spindles of 1-1/4" and 3/4". -- (2) Spindle speeds of 7,500 & 10,000 RPM. -- Heavy cast iron table with a 6" max. table ring. -- Spindle lock, micro-adjustable back fence and reversing switch. -- Miter gauge, 1/2" router collet adapter and cutterhead guard. -- Sliding table attachment (optional),please add ...$569.

Torry Hiddema
800-374-5009 ext:371
Call

2019 EMC VENUS 1300 1K  Sander
$52,850

EMC VENUS 1300 1K ... Finishing Sander with (1) Sanding Head: Combination Head.Useful working width 1,300 mm (51"). Working thickness min/max mm 3 - 170 (1/8" - 6-5/8").Working Unit: Combination Roller & Pad. -- Roller diameter 142 mm (5-5/8"). Rubber covered hardness 85 Shore. Roller pressure adjustment control & "Grit-set system". Main Motor On Off Selector control with pneumatic piston to select roller, 22 kW (30 HP) Automatic star-delta starter Rotating cutting speed: 18 m/Sec (59 FPS). -- PNEUMATIC Controlled Flexible Sanding Pad Including On-Off Selector: Quick Change System: Removable pad with felt, rubber and graphite. Rotating cutting speed 18 m/Sec (55.8 FPS). Abrasive belts oscillation by means of electronic photocell sensor.Feed system:CONSTANT PASS LINE - fixed infeed height 900 mm (35") from floorIdle table rollers support in infeed and outfeedRubber covered presser rollers, groovedVariable feed belt speed, adjustable from 3 to 19 m/Min (9.8 - 62 FPM). Inverter ControlledLarge diameter screws on machined guides with columns and pistonsAutomatic feed belt centering deviceElectronic digital display for working thicknessGeneral Machine Features: -- Analog ammeters on main control cabinet. -- Electronic motorized grit set system, control from touch screen.Electronical Panel: -- Check Control Self Diagnostics with Alarm Control. -- Analog Ammeter on the main control cabinet. -- Infeed table thickness system electrically controlled. -- Independent Overload protection.Safety: -- Infeed front emergency swinging bar for oversized panels. -- Infeed protection pressing blade to avoid pieces to go back to operator. -- Rear and front emergency push buttons. -- Automatic brake on abrasive belts motors. -- Automatic emergency stop and alarm display in case of: &#9679 Low Air Pressure. &#9679 Doors opened ("easy maintenance and inspection"). &#9679 Electric motors overloading. &#9679 Emergency detector for over thickness material cut. &#9679 No tension on abrasive belt. &#9679 Abrasive belt lateral mistracking. &#9679 Abrasive belt broken.Idle table rollers support in infeed and outfeedCentralized Control Cabinet: &#9679 IP 54 protection against dust & moisture. &#9679 Analog ammeter on main control cabinet. &#9679 Table lifting-lowering thickness system electrically controlled. &#9679 AUTOMATIC Delta - Star starter on abrasive belts motors. Centralized independent pneumatic control cabinet: &#9679 IP 54 protection against dust & moisture. &#9679 Pneumatic air filter with automatic water-drain system. &#9679 Pneumatic adjustment for "Grit set system". &#9679 Pneumatic plant working without lubrication. &#9679 Compressed air pressure 6 bar (85 PSI). Options Available: Tampico Brush natural fiber brush for cleaning of the pieces, diameter 150 mm (6"). Motor Power 1.1 kW (1.5 HP). $3,950

Ed Webb
800-374-5009 ext:377
Call

2019 EMC EXPLORER 1300 1K  Sander
Call for Price

EMC EXPLORER 1300 SUPER 1K ... Wide Belt Sander with (1) Sanding Head; Combination Head Roller/Pad.Versatile, medium duty machine, ideal for cabinet shops or other panel sanding application.Useful working width 1,300 mm (51"). Working thickness min/max mm 3 - 170 (1/8" - 6-5/8").SUPER indicates longer abrasive belt length of 2,200 mm (87").TECHNICAL DATA: -- Useful working width 1,300 mm (51"). -- Working thickness min./max. mm 3 - 170 (1/8" - 6-11/16"). -- Abrasive belt dimension (length) 2,200 mm (87") x (width) 1,320 mm (52"). -- Feed belt speeds adjustable by electronic inverter from 3 to 17 m/Min (10 - 55 FPM). Head configuration:1st Head: Combination Roller & Pad. -- Roller diameter 142 mm (6"). -- Rubber covered roller with hardness 85 Shore. -- Automatic abrasive belt grit compensation with "Grit-Set System". -- On/Off Selector control with pneumatic piston to select roller. -- Flexible sanding pad, pneumatically activated. With automatic timing control for pad, synchronized with feed speed, electronically controlled. -- Quick Change System for removable pad with felt, rubber and graphite. -- Abrasive Belt cutting speed 17 m/Sec (56 FPS). -- Driven by 11 kW (15 HP) motor. -- Air Jet Belt blower for abrasive belt cleaning, controlled by part size.Abrasive belt oscillation controlled by electronic photocell sensor.Feed System: -- Working thickness min./max. 3 - 170 mm (1/8" - 6-11/16"). -- Motorized table lifting including fine adjustment, on (4) precision screws. Natural rubber conveyor belt, machined. Automatic feed belt centering device. Electronic digital display for working thickness in 0.1 mm (0.004") micro increments. -- Feed belt speeds adjustable by electronic inverter from 3 to 17 m/Min (10 - 55 FPM). Centralized Control Cabinet: -- Control panel with self-diagnostics alarm control unit. -- Analog load meters on main control cabinet. -- Table lifting-lowering thickness system, electrically controlled. -- AUTOMATIC Delta - Star starter on main motor and IP 54 protection against dust & moisture. Independent Pneumatic Control Cabinet: -- Pneumatic air filter with automatic water-drain system. -- Pneumatic adjustment for "Grit set system". -- Pneumatic plant working without lubrication. Compressed air pressure 6 bar (85 PSI). IP 54 protection against dust & moisture. Safety Features: -- Anti-kickback infeed protection. -- Oversized parts infeed protection by swinging bar. -- Emergency push buttons front & rear. --Automatic brake on main motor. -- Automatic emergency stop and alarm displayOption: TAMPICO Cleaning Brush, 150 mm (6") diameter; system to be integrated into outfeed section . Please add ...$3,400USA UL or Canada CSA Safety Features

Ed Webb
800-374-5009 ext:377
Call

2019 Extrema WS-110  Shaper
$1,299

EXTREMA's new "Classic" Line of machines offers a great value. -- 3/4" & 1" Interchangeable spindles. -- 3,450 RPM Single Phase motor designed for operation in most smaller shops -- Belt drive for spindle speeds of 8,000 & 10,000 RPM _ 2-5/8" capacity under the nut (3/4" spindle) and 3-7/8" vertical spindle travel will accomodate a variety of cutters. -- Large Table size 28" x 30" with a 6" max. dia. table opening -- Includes Fence assembly, miter gauge, 1/2" collet adapter. -- Convenient handwheel for spindle adjustment.

Torry Hiddema
800-374-5009 ext:371
Call

Extrema 12 inch  Gang Rip Saw
Call for Price

Model XR12 15 HP Main Motor Blade Size 12" Main Motor 15 HP Feed Motor 1½ HP Blade Speed 4500 Feed Speeds 50 - 100ft/min Max Rip Capacity 14¾" Max Thickness Capacity 3¾" Working Height 32" Table Size 37" x 51¼" Hold Down Rollers 6 Chain Rail Lenght 40" Chain Pad Width 6" Guaranteed Glue Line Lenght 8' Sets of Anti-Kickback fingers 3 Disc Brakes Yes Oiler System Auto w/ shutoff Amps (230V / 460V) 42A / 21A Weight 2600 lbs 12" Gang Rip

Carolina Machinery Sales, Inc
704-288-1904
Call

2019 EMC WOODY 1100 2RK  Sander
Call for Price

EMC Woody 1100 2RK Calibrating Sander, (2) Sanding Heads, Roller and Combination HeadTECHNICAL DATA: -- Useful working width 1,100 mm (43"). -- Working thickness min./max. 3 - 190 mm (1/8" - 7-1/2"). -- Abrasive belt dimensions, (length) 1,900 mm (75") x (width) 1,120 mm (44"). -- Feed belt speed adjustable by INVERTER from 2.5 to 12 m/Min (8.2 - 39.3 FPM). Head configuration:1st Head: Roller Diam. 125 mm (5"), Rubber Covered Roller, 85 Shore, Roller Pressure Adjustment Control and "Grit-set System". Abrasive Belt Sanding/Cutting Speed 17 m/Sec (56 FPS). 15 kW (20 HP) Main Motor.2nd Head: Combination Roller & Pad. -- Roller diameter 102 mm (4"). Rubber covered hardness 45 Shore. Roller pressure adjustment control. 7,5 kW (10 HP) Main Motor. On-Off Selector control with pneumatic piston to select roller or not. -- PNEUMATIC Flexible Sanding Pad Including On-Off Selector: Quick Change System: Removable pad with felt, rubber and graphite. Abrasive Belt sanding/cutting speed 17 m/Sec (56 FPS). Abrasive belts oscillation by means of electronic photocell sensor. Idle table rollers support in infeed and outfeed.Work Table (Conveyor Bed): Motorized table lifting including fine adjustment, on (4) precision screws. Natural rubber conveyor belt, machined. Feed belt centering by means of conical rollers. Electronic digital display for working thickness; resolution 0.1 mm (0.004").Centralized Control Cabinet: IP 54 protection. Analog ammeter on main control cabinet. Table lifting-lowering thickness system electrically controlled. AUTOMATIC Delta - Star starter on abrasive belts motors. Centralized independent pneumatic control cabinet: IP 54 protection. Pneumatic air filter with automatic water-drain system. Pneumatic adjustment for "Grit set system". Pneumatic plant working without lubrication. Compressed air pressure 6 bar (85 PSI). Features: Control panel with self-diagnostics alarm control unit, grooved rubber covered holddown rollers.

Joe Retzlaff
800-374-5009 ext:348
Call

2019 EMC FLEXY 1350 3TKFB  Sander
Call for Price

EMC FLEXY 1350 3TKFb Finishing Sander, (3) Sanding Heads - Cross Belt, Combination, Superfinishing + BrushingUseful working width 1,350 mm (53"); Working thickness min./max. 3 - 190 mm (1/8" - 7-1/2").Head configuration: 1st Head: CROSS BELT PAD "T 50 C" Electronic Cross Belt Sanding Pad: -- Electronic PAD segmented in (50) section. -- Width of the single element (section): 27.0 mm (1.06"). -- Abrasive belt length: 4,550 mm (179") Chevron belt length: 4,100 mm (161-1/2"). -- Abrasive belt width: 140 mm (5-1/2") Chevron belt width:130 mm (5-1/8"). -- Main motor power: 11 kW (15 HP) with Electronic Inverter for variable belts speed from 3 - 22 m/Sec (9.8 - 72 FPS). Abrasive belt blower cleaner, with automatic on-off control.2nd Head: COMBINATION Unit "K", Belt dimensions: 2,620 x 1,370 mm (103" x 54"). -- Roller diameter: 142 mm (5-5/8"). -- Roller rubber hardness 85 Shore, Constant control to any position with accuracy 0.02 mm. -- Electronic PAD segmented in (50) section. -- Width of the single element (section): 27.0 mm (1.06"). -- Rotation: Against feed (clockwise). -- Motor power:11 kW (15 HP) Automatic star-delta starter. Abrasive Belt cutting speed:18 m/Sec (59 FPS). Blower for the roller unit.3rd Head: SUPERFINISHING PAD "F", Electronic PAD segmented in (50) sections. With inner chevron belt. -- Belts dimensions: 2.620 x 1.370 mm. -- Width of the single element (section): 27.0 mm (1.06"). -- Electronic motorized roller pressure adjustment "grit-set system". -- Rotation: Against feed (clockwise). -- TIMING oscillating cleaning abrasive belt blowers for superfinishing. -- Motor power: 11 kW (15 HP) with electronic inverter variable abrasive belt speed 3 to 18 m/Sec (9.8 - 59 FPS).4th Position: TAMPICO natural fibre brush roller, 150 mm diameter (5-5/16")Feed system: &#9679 Constant pass line, 900 mm (35.4") from floor. &#9679 Idle table rollers support in infeed and outfeed &#9679 Rubber covered holddown rollers, grooved &#9679 Variable feed belt speed, adjustable from 3 to 18 m/Min (9.8 - 59 FPM), Inverter Controlled &#9679 Large diameter screws on machined guides with columns and pistons &#9679 Automatic feed belt centering device.General Machine Features: -- Independent main motors. -- Analog ammeters, for each motor, on main control cabinet. -- Electronic motorized grit set system, control from touch screen for each head setup. -- Automatic synchronized PAD anti-dubbing control, synchronized to ANY feed belt speed.Electronic programmable color TOUCH SCREEN display, 10" wide &#9679 PLC with micro-processor of latest generation, modular and expandable &#9679 Connection USB, RS232, Ethernet 10/100/1000 &#9679 Memory capacity: 100 working programs or more &#9679 Graphic synoptic to facilitate programmingSoftware facilities: -- Automatic motor sequence starting. -- Command, programming and display for all electronic pad functions. -- Command, programming and display for: thickness, for feeding, for all in

Joe Retzlaff
800-374-5009 ext:348
Call

2001 Extrema XS-3B37  Sander
$14,500

EXTREMA XS-3B37 Wide Belt Sander, (3) Heads;3-Head, 36" width cap. Drum, Drum, Platen;Head Configuration: -- 1st Head: 8" Dia. rubber covered contact roll, 25 HP motor. -- 2nd Head: 8" Dia. rubber covered contact roll, 25 HP motor; -- 3rd Head: Combination head with 4-7/8" dia. contact roll and 2-1/2" wide finishing platen, 20 HP motor.Specifications: -- Height adjustment of both contact rolls with dial indicators. -- 37" x 75" Abrasive belts, OMRON solid-state abrasive belt tracking. -- 3 HP Variable feed drive of 15 - 50 FPM; GOODYEAR "endless belt" conveyor with automatic tracking. -- 0" - 6" Max. motorized thickness opening with digital PLC control, keypad entry for thickness with LED readout, 0.5 HP motor, (4) 1" dia. screw jacks.Equipped with & Features: -- Infeed over thickness bar, infeed & outfeed spring loaded rubber covered holddown rolls on all heads. -- Emergency stops at infeed & outfeed, air operated disc brakes on sanding heads, --Automatic opening of conveyor bed upon any emergency stop or shutdown.

Joe Retzlaff
800-374-5009 ext:348
Call

2002 Fruilmac CONTOURAMAT  Tennoner
$29,400

FRIULMAT Contouramat Double End Tenoner:Automatic hopper feed, wide base tenoner with right side moveable left side fixed.Specifications: -- 1,000 mm (39") Max. motorized opening with Trim saws and High speed Cope heads; Moveable side traverses with screws,. -- Machine opening programmable control and LED readout at control panel. -- 180 mm (7") Min. opening. -- 8 - 50 mm (0.314"- 2") part thickness with indicator and 30 to 250 mm (1.18" to 9.8") workpiece width.Each side equipped with: -- 1st Station: Top trim saws, 3 HP - 7,600 RPM each motor. -- 2nd Station: High speed Cope head, 7.5 HP - 7,000 RPM spindles with manual adjustment up/down and in/out. -- 30 mm Dia. spindle on trim unit, 40 mm spindle on cope unit.Feed system: -- Pusher dogs on each side mounted on linear bearing carriages that slide from infeed to outfeed, carriages are synchronized with double chains, feeding is automatic in conjunction with the hopper feed. -- Non-driven overhead holddown beams endless belts. -- 250 mm (9.8") Max. part width without the hopper and 30 mm (1-3/16") wide minimum. Max. thickness 50 mm (2") and 12 mm (0.47") minimum.Free-standing control console, and approx. production 16 to 20 pieces per Min.Note: New feed drive installed in July 2019

 EASTERN CDN, AL
EX-FACTORY INC.
704-841-2001
Call

2000 Furniertechnik LZM-1400  Veneer Equipment
$16,750

FURNIERTECHNIK LZM-1400 Longitudinal Splicing Machine.The "LMZ-1400" splices pre-glued veneer strips in order to achieve a fully closed solid glue splice line. Pre-gluing is done on RE/L-35 (see below). -- Veneer size capacity: Thickness: 0.4 to 2.5 mm (0.015" - 0.10"). Width min. and max.: 40 mm - 1,400 mm ( 1.57"- 55") and Length min. 305 mm (12"). -- Machine Specs: Feed speed: 10 to 40 MPM (32.5 to 130 FPM). length of heating zone is 1,000 mm (39"). Length Heating element are individually adjustable to a max. temperature of 230° Ce (446 °F). Glue type: Off-the-shelf Urea or PVA. -- Supply requirements: Compressed Air at 5 NL/min (0.5 CFM) at 6 bar (90 PSI). Electrical supply transformer 400 V primary to 480 V secondary. Total load is 6 KW. -- Dimensions: Length 1,800 mm (71"), Width 2,200 mm (86"), Height adjustable 1,700 - 1,800 mm (67 - 71"). Weight 1,350 KG ( 2,910 Lbs).Also Includes: RE/L-35 Edge Glue Machine (Single Sided). -- Working width is 3,500 mm in grain direction. Working depth max: Up to (1) packet with (32) sheets at 0.7 mm each. Veneer widths 5 - 30 mm (cross to the grain). -- Supply needed: Electrical load is 0.5 KW. Compressed air at 6 bar (90 PSI) 0. 5 CFM. Dimensions are (L x W x H) 4,300 x 800 x 1,100 mm (170" x 32" x 44"). Weight is 1, 000 kG (2,200 Lbs)

Tony Cornacchione
800-374-5009 ext:432
Call

2005 Gabbiani GALAXY 105 T  Panel Saw
$94,500

GABBIANI GALAXY 105 T REAR LOAD, AUTOMATIC PANEL SAW W/VACUUM LOADING/UNLOADING + STORAGE & RETRIEVAL: -- Specifications:126" (3,200 mm) Overall rip cutting cap.; 4.1" (105 mm) max. saw blade projection; 20 HP (15 kW) Main motor w/pneumatic saw blade "quick change" system, 2.4 HP (1.8 kW) scoring motor with "Electronic Adjustment" form the control panel.14.9" dia. (380 mm) - 3,900 RPM main & 4.1" dia. (105 mm) - 6,350 RPM scoring blade; Independent rising of main saw and scoring saw units. -- Saw Carriage: Variable feed speed from 0 - 492 FPM (0 - 150 MPM), return speed 492 FPM (150 MPM).Powered by SIEMENS AC brushless motor on rack & pinion system. -- Pusher Fence:(7) Material gripper clamps, forward speed from 0 - 295 FPM (0 - 90 MPM), return speed 295 FPM (90 MPM), Powered by SIEMENS AC brushless motor on rack & pinion system.NOTE: Pusher fence forward speed is currently set to EC standard of 82 FPM (25 MPM) -- Operator & Machine Control:PC front end with "WinCut" + Windows "XP" operating system, 15" color monitor, keyboard, 1.44MB floppy disk & CD-ROM drive for data transfer, USB & RS-232 ports for possible downloading from an office PC. -- Rear Table: 126" x 72.8" (3,200 x 1,850 mm) max. panel size; max. bunk height 23.62" (600 mm).Rear roller conveyor bed with (2) integrated front & cross-aligning units before cutting to prevent offset panels within the same book. -- Complete With:(4) Front Air float tables 110" x 25.5" (2,810 x 650 mm). -- Options Include:Mahros Runner 3 & Assi 8-position Storage and Retrieval system:MAHROS RUNNER Overhead gantry loader made of two portal frames that support the horizontal carriage with the suction cup vertical arm. The system is designed to have two input deposit stations for new stacks, eight storage stations and one feeding station for the panel saw.The machine is thoroughly automatic and does not need any manual adjustment. The horizontal movement of the carriage and the vertical movement of the arm are done with prismatic guides with re-circulating spheres with and automatic lubrication. These movements are given by timing belts and motors driven by inverter.The cup holding frame for panel manipulation is composed of eight cross bars each one with (4) vacuum cups. The PLC, equipped with keypad and programming display, controls the working cycle and provides the axes interpolation to shorten the arm path.A PC near the two feeding stations allows the operator to manage the feeding of new boards from the two feeding stations to the eight storage stations.Label printing is activated in the controller & the label printer is included -- Actual model is GABBIANI GALAXY 105T BR + Mahros Runner 3 & Assi 8-Position Storage and Retrieval System

Bob Bullin
800-374-5009 ext:346
Call

2007 Gabbiani GALAXY 125TL  Panel Saw
Call for Price

Ready for immediate removal. 12' Capacity

Carolina Machinery Sales, Inc
704-288-1904
Call

Galt Canadian FJ-80  Jointer and Finger Jointer
$9,500

Single head shaper, 9 HP cutterhead, 2 HP trim saw, 1-1/4" cutterhead spindle, 4000/6000/8000/10,000 RPM spindle speed, 8" saw diameter, 5" diameter dust hood, 2" X 8" maximum workpiece, 6" minimum work lengths, unlimited maximum length. Complete with: glue spreader with heavy duty gearhead motor drive, stainless steel glue pan, aluminum discs, scraper fingers (all mounted on floor stand). Assembly press is fully adjustable for 3' to 8' lengths, single hand operated control to activate side & end clamps (10" stroke). Includes: magnetic starter.

Jeff Terrill
800-374-5009 ext:349
Call

Galt Canadian FJ-80  Jointer and Finger Jointer
$15,800

GALT CANADIAN LOW PRODUCTION FINGER JOINTERComplete with self-feeding table with holddown clamps, hydraulically stroked past trim saw and cutterhead. -- Trimsaw powered by 3 HP direct drive, 3,600 RPM arbor motor; uses 8" dia. blade. -- Shaper with 7-1/2 HP spindle motor, 1-1/4" spindle, 7" spindle travel, 6-3/4" cap. under nut. - (4) spindle speed settings of 3,500 - 6,500 - 8,000 & 10,000 RPM, reverse rotation switch, 45" x 35" table, 12-1/2" max. tooling dia.; 36" table height. Includes cutter guard, dust outlets, self-braking motor, spindle lock, emergency stop and motor control center for all motor and electrical functions. -- Finger Joint Assembly Machine complete with material clamps and squeeze press. Assembles (2) joints at a time with operator stepping the assembled length past the automatic cutoff saw. When a length stop is contacted by the assembled length, the cutoff saw fires, cutting up from under the table with the material is cut to specified lengths. Long lengths can be assembled. -- Tooling: (1) milled to pattern cutterhead and (1) each carbide tipped Retrim and Cutoff Sawblades.

Jeff Terrill
800-374-5009 ext:349
Call

2006 Gannomat EXPRESS S2  Boring Machine
$14,950

GANNOMAT 802 EXPRESS S2 Double Head Hinge Boring & Insertion Machine: -- Specifications:2-Headed Automatic Drilling and Hinge Inserting Machine. The left drilling and inserting station is fixed.The right drilling and inserting station is easy movable in length direction on profile bearing guides with pneumatic locking and can be controlled by scale and 3 program - stops. -- Working Capacity:Working width between the stations: min: 180 mm (4.6"); max: 1,550 mm (61") for Express S2. -- Features:Drilling head equipped with (2) spindles located along the Y-axis located on linear bearing guide ways.Travel Speed max. 246 FPM (75 MPM); Cycle time for drilling & insertion are approx (4) Sec;Spindle speed 3,400 RPM with a 10 mm shank dia.; magazine hopper holds approx. (35) KD fittings.Side stops & boring depth settings by mechanical digital counters.Drilling and inserting station movable with pneumatic locking. -- Complete with:Drill head, magazine, inserting die incl. 1 Exhaust device, Ø 100 mm, 2 HP (1,5 kW) motor - 0800-A0104-Spindle-drill head (pitch according to hinge model) - 0800-0400 Magazine complete with inserting die - 0800-20MD, Magazine without inserting die - 0800-20MA, Magazine complete with inserting die of different TB measurement 0800-TABD2 x Mechanical digital counter for precise and fast adjustemt. -- Options Include:2 x Safety-control with metal-detector per drilling and inserting station (in case of an operator error the safety control with metal-detector prevents the drilling into a pre-inserted hinge),Requires 90 PSI of compressed air and equipped with 3.9" dia. dust exhaust outlet. Actual Model is GANNOMAT 802 EXPRESS S2

Ed Webb
800-374-5009 ext:377
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2019 LumbermenOnline.com - All Rights Reserved